What is the full form of ASTM? a. American Society for Testing and Materials b. American Standards for Textile Matters c. Association for standardizing testing methods d. Association of Standard Textile Manufacturers

What is the full form of ASTM?
a. American Society for Testing and Materials
b. American Standards for Textile Matters
c. Association for standardizing testing methods
d. Association of Standard Textile Manufacturers
by

1 Answer

Answer :

a. American Society for Testing and Materials
by

Related questions

What are the horizontal loops formed in knitting known as? a. Warps b. Wefts c. Courses d. Wales

Description : What are the horizontal loops formed in knitting known as? a. Warps b. Wefts c. Courses d. Wales

Last Answer : c. Courses

The ends from warp beam have to be drawn through which of the following part sequentially: a. Headles b. Shuttle c. Drawing d. Cloth beam

Description : The ends from warp beam have to be drawn through which of the following part sequentially: a. Headles b. Shuttle c. Drawing d. Cloth beam

Last Answer : a. Headles

Arrange the knitting sequence in correct order 1. Needle falls, old loop rises closing latch of the needle 2. Needle is now ready to repeat cycle 3. Old loop is held on the stem of the needle. The latch is open 4. Old loop is cast off; new loop pushes the lap to open; needle rises and the new loop slides down to the stem of the needle 5. New loop is formed around the hook of the needle a. 2,1,5,3,4 b. 3,5,1,4,2 c. 3,5,4,1,2 d. 2,1,4,3,5

Description : Arrange the knitting sequence in correct order 1. Needle falls, old loop rises closing latch of the needle 2. Needle is now ready to repeat cycle 3. Old loop is held on the stem of the needle. The latch is open 4. Old loop is cast off; new ... a. 2,1,5,3,4 b. 3,5,1,4,2 c. 3,5,4,1,2 d. 2,1,4,3,5

Last Answer : b. 3,5,1,4,2

2/40s yarn describes: a. Single yarn b. Spun Yarn c. Monofilament Yarn d. Plied yarn

Description : 2/40s yarn describes: a. Single yarn b. Spun Yarn c. Monofilament Yarn d. Plied yarn

Last Answer : d. Plied yarn

Indirect yarn numbering is expressed as: a. Yarn Count b. Denier c. Tex d. Microdenier

Description : Indirect yarn numbering is expressed as: a. Yarn Count b. Denier c. Tex d. Microdenier

Last Answer : a. Yarn Count

Retting is used in the processing of which of the following fibres: a. Cotton b. Linen c. Silk d. Viscose rayon

Description : Retting is used in the processing of which of the following fibres: a. Cotton b. Linen c. Silk d. Viscose rayon

Last Answer : b. Linen

Example of natural plant fibre: a. Silk b. Cotton c. Viscose rayon d. Polyester

Description : Example of natural plant fibre: a. Silk b. Cotton c. Viscose rayon d. Polyester

Last Answer : b. Cotton

Which of the following is not a primary essential property of a fibre? a. Flexibility b. Tensile strength c. Absorbency d. Cohesiveness

Description : Which of the following is not a primary essential property of a fibre? a. Flexibility b. Tensile strength c. Absorbency d. Cohesiveness

Last Answer : c. Absorbency

Higher is the mesh number, smaller will be the aperture size of the screen. It means that the aperture size of a 200 mesh screen will be smaller than that of 20 mesh screen. This is valid for(A) British standard screens(B) German standard screens (DIN 1171) etc(C) American standard screens (ASTM and Tyler standard screens)(D) All (A), (B) and (C)

Description : Higher is the mesh number, smaller will be the aperture size of the screen. It means that the aperture size of a 200 mesh screen will be smaller than that of 20 mesh screen. This is valid for (A) British ... (C) American standard screens (ASTM and Tyler standard screens) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

For standardizing NaOH solution, which of the following is used as a primary standard ?

Description : For standardizing NaOH solution, which of the following is used as a primary standard ?

Last Answer : For standardizing NaOH solution, which of the following is used as a primary standard ? A. Sodium ... Ammonium Sulfate C. Oxalic acid D. dil. HCl

Who developed standards for the OSI reference model? a. ISO - International Standards Organization b. ANSI - American National Standards Institute c. IEEE - Institute of Electrical and Electronics Engineers d. ACM - Association for Computing Machinery

Description : Who developed standards for the OSI reference model? a. ISO - International Standards Organization b. ANSI - American National Standards Institute c. IEEE - Institute of Electrical and Electronics Engineers d. ACM - Association for Computing Machinery

Last Answer : a. ISO - International Standards Organization

What were the problems faced by the textile manufacturers in India in the late 1800s ? -SST 10th

Description : What were the problems faced by the textile manufacturers in India in the late 1800s ? -SST 10th

Last Answer : Exports declined and import of textiles increased. The Indian textile manufactures could neither sell their goods outside India nor could they sell their goods inside India. Import of English textiles into ... mill were also set up in India and the hand -weavers were virtually without any work.

How did the invention of the cotton gin benefit southern planters How did it benefit northern textile manufacturers?

Description : How did the invention of the cotton gin benefit southern planters How did it benefit northern textile manufacturers?

Last Answer : i dont know i uess it worked

How do voluntary health organizations such as American red cross the American cancer society the American heart association and the American lung association contribute to the community health?

Description : How do voluntary health organizations such as American red cross the American cancer society the American heart association and the American lung association contribute to the community health?

Last Answer : What is the answer ?

An association of cement manufacturers is an example of– (A) Diagonal combination (B) Vertical combination (C) Horizontal combination (D) Lateral combination

Description : An association of cement manufacturers is an example of– (A) Diagonal combination (B) Vertical combination (C) Horizontal combination (D) Lateral combination

Last Answer : Answer: Horizontal combination

Electrical insulation is classed by the _____________. A. International Association of Electrical Manufacturers B. approximate operating voltage and current expected C. U.S. Coast Guard D. temperature stability of the manufacturing material(s)

Description : Electrical insulation is classed by the _____________. A. International Association of Electrical Manufacturers B. approximate operating voltage and current expected C. U.S. Coast Guard D. temperature stability of the manufacturing material(s)

Last Answer : Answer: D

the National Association of Hoisery Manufacturers sets guidelines for its member VU Cafeteria firms to follow regarding the use of unethical practices, it is engaging in: A)legislation B)lobbying C)self-regulation D)environmental scanning E)trade restraint

Description : the National Association of Hoisery Manufacturers sets guidelines for its member VU Cafeteria firms to follow regarding the use of unethical practices, it is engaging in: A)legislation B)lobbying C)self-regulation D)environmental scanning E)trade restraint

Last Answer : C)self-regulation

64-132) rank coal (ASTM) means a coal with 64% (A) Fixed carbon and having a heating value around 13, 200 BTU/1b (B) Ash and heating value around 13, 200 BTU/1b (C) Fixed carbon and heating value around 132 BTU/1b (D) None of these

Description : 64-132) rank coal (ASTM) means a coal with 64% (A) Fixed carbon and having a heating value around 13, 200 BTU/1b (B) Ash and heating value around 13, 200 BTU/1b (C) Fixed carbon and heating value around 132 BTU/1b (D) None of these

Last Answer : (A) Fixed carbon and having a heating value around 13, 200 BTU/1b

64-132) rank coal (ASTM) means a coal with 64% (A) Fixed carbon and having a heat value of 13, 200 BTU/1b (B) Ash and a heating value of 13, 200 BTU/1b (C) Fixed carbon and a heating value of 132 BTU/1b (D) None of these

Description : 64-132) rank coal (ASTM) means a coal with 64% (A) Fixed carbon and having a heat value of 13, 200 BTU/1b (B) Ash and a heating value of 13, 200 BTU/1b (C) Fixed carbon and a heating value of 132 BTU/1b (D) None of these

Last Answer : (A) Fixed carbon and having a heat value of 13, 200 BTU/1b

For initial audits, additional matters the auditor may consider in the overall audit strategy and audit plan include the following except a. Major issues including the application of accounting principles or any auditing and reporting standards discussed with management. b. Confirmation of material accounts receivable balance at the end of the year. c. Planned audit procedure to obtain sufficient appropriate audit evidence regarding opening balances. d. Assignment of firm personnel with appropriate levels of capabilities and competence to respond to anticipated significant risks

Description : For initial audits, additional matters the auditor may consider in the overall audit strategy and audit plan include the following except a. Major issues including the application of ... firm personnel with appropriate levels of capabilities and competence to respond to anticipated significant risks

Last Answer : Confirmation of material accounts receivable balance at the end of the year.

The Philippine Standards on Review Engagements (PSREs) are to be applied in a. The audit of historical financial informationb. Assurance engagements dealing with subject matters other than historical financial information. c. The review of both historical and prospective financial information. d. The review of historical financial information..

Description : The Philippine Standards on Review Engagements (PSREs) are to be applied in a. The audit of historical financial information. b. Assurance engagements dealing with subject matters other ... of both historical and prospective financial information. d. The review of historical financial information.

Last Answer : The review of historical financial information.

The Philippine Standards on Assurance Engagements (PSAEs) are to be applied in a. The audit or review of historical financial information. b. Assurance engagements dealing with historical financial information. c. Compilation engagements and agreements to apply agreed-upon procedures to information. d. Assurance engagements dealing with subject matters other than historical financial information.

Description : The Philippine Standards on Assurance Engagements (PSAEs) are to be applied in a. The audit or review of historical financial information. b. Assurance engagements dealing with ... information. d. Assurance engagements dealing with subject matters other than historical financial information.

Last Answer : Assurance engagements dealing with subject matters other than historical financial information.

Manufacturers are required to put star rating labels as per the... a. ISO c. The standards and labeling program b. ASME d. RBI

Description : Manufacturers are required to put star rating labels as per the... a. ISO c. The standards and labeling program b. ASME d. RBI

Last Answer : The standards and labeling program

Which of the following is an advantage of mounting an application on the web? a) The possibility of 24 hour access for users b) Creating a system that can be extended globally c) Standardizing the design of the interface d) All of The Above e) None of The Above

Description : Which of the following is an advantage of mounting an application on the web? a) The possibility of 24 hour access for users b) Creating a system that can be extended globally c) Standardizing the design of the interface d) All of The Above e) None of The Above

Last Answer : d) All of The Above

The type of instruments used mainly for standardizing instruments in laboratories is

Description : The type of instruments used mainly for standardizing instruments in laboratories is (a) Indicating instrument (b) Integrating instrument (c) Absolute instrument (d) Recording instrument  

Last Answer : Ans:Option C

The use of which instruments is merely confined within laboratories as standardizing instruments?

Last Answer : The use of absolute instruments is merely confined within laboratories as standardizing instruments.

What does ASME B16.5 cover? a) Pressure and temperature ratings. b) Materials, dimensions, tolerances, and marking. c) Testing and methods of designating openings. d) All of the above.

Description : WWhat does ASME B16.5 cover? a) Pressure and temperature ratings. b) Materials, dimensions, tolerances, and marking. c) Testing and methods of designating openings. d) All of the above.

Last Answer : d) All of the above.

A CPA establishes quality control policies and procedures for deciding whether to accept a new client or continue to perform services for a current client. The primary purpose for establishing such policies and procedures is a. To enable the auditor to attest to the integrity or reliability of a client. b. To comply with the quality control standards established by regulatory bodies. c. To minimize the likelihood of association with clients whosemanagement lacks integrity.d. To lessen the exposure to litigationresulting from failure to detectirregularities in client financialstatements

Description : A CPA establishes quality control policies and procedures for deciding whether to accept a new client or continue to perform services for a current client. The primary purpose ... resulting from failure to detect irregularities in client financial statements association with clients whose

Last Answer : To minimize the likelihood of association with clients whose management lacks integrity

Which of the following is the authoritative body designated to promulgate auditing standards? a. Financial Reporting Standards Council b. PICPA c. Association of CPAs in Public Practice and PICPA d. Auditing and Assurance Standards Council

Description : Which of the following is the authoritative body designated to promulgate auditing standards? a. Financial Reporting Standards Council b. PICPA c. Association of CPAs in Public Practice and PICPA d. Auditing and Assurance Standards Council

Last Answer : Auditing and Assurance Standards Council

To raise the standards of the profession, the Philippine Accountancy Act of 2004 requires that the CPA profession be integrated under the rules to be established by a. The PICPA. b. The Board of Accountancy. c. The Professional Regulation Commission. d. The Government Association of CPAs.

Description : To raise the standards of the profession, the Philippine Accountancy Act of 2004 requires that the CPA profession be integrated under the rules to be established by a. The PICPA. b. The Board of Accountancy. c. The Professional Regulation Commission. d. The Government Association of CPAs.

Last Answer : The Professional Regulation Commission

The element of the audit planning process most likely to be agreed upon with the client before implementation of the audit strategy is the determination of the a. Methods of statistical sampling to be used in confirming accounts receivable. b. Pending legal matters to be included in the inquiry of the client's attorney. c. Evidence to be gathered to provide a sufficient basis for the auditor's opinion. d. Schedules and analyses to be prepared by the client's staf

Description : The element of the audit planning process most likely to be agreed upon with the client before implementation of the audit strategy is the determination of the a. Methods of statistical sampling to be used ... for the auditor's opinion. d. Schedules and analyses to be prepared by the client's staf

Last Answer : Schedules and analyses to be prepared by the client's staf

What are the two methods used by fiber manufacturers to fabricate multimode and single mode glass fibers?

Description : What are the two methods used by fiber manufacturers to fabricate multimode and single mode glass fibers?

Last Answer : Vapor phase oxidation and direct-melt process.

Public opinion is – (1) The opinion of the majority (2) The opinion of the people on political matters (3) Opinion of the citizens of the country (4) The opinion based on reasoning which is for the welfare of the whole society

Description : Public opinion is – (1) The opinion of the majority (2) The opinion of the people on political matters (3) Opinion of the citizens of the country (4) The opinion based on reasoning which is for the welfare of the whole society

Last Answer : (1) The opinion of the majority Explanation: Public opinion is defined as the prevailing and widespread belief of the majority of people in a society about a given subject or issue. ... beliefs about a particular topic, expressed by a significant proportion of a community (Encyclopaedia Britannica).

What are the raw materials needed by the textile industry? -SST 10th

Description : What are the raw materials needed by the textile industry? -SST 10th

Last Answer : Cotton, jute, silk and wool are the basic raw materials of the textile industry.

The full form of MEPS A) Minimum energy protection standards C) minimum energy policies standard B) Minimum energy performance standards D) minimum efficiency performance standards

Description : The full form of MEPS A) Minimum energy protection standards C) minimum energy policies standard B) Minimum energy performance standards D) minimum efficiency performance standards

Last Answer : Minimum energy performance standards

In a selling process in today's world 1. Only standard products are sold 2. No customization required 3. The seller need not have product knowledge 4. the seller should aim at customer satisfaction 5. only quantum of sales matters

Description : In a selling process in today's world 1. Only standard products are sold 2. No customization required 3. The seller need not have product knowledge 4. the seller should aim at customer satisfaction 5. only quantum of sales matters

Last Answer : the seller should aim at customer satisfaction

In a selling process in today's world ______________ 1. only standard products are sold 2. no customization required 3. the seller need not have product knowledge 4. the seller should aim at customer satisfaction 5. only quantum of sales matters

Description : In a selling process in today's world ______________ 1. only standard products are sold 2. no customization required 3. the seller need not have product knowledge 4. the seller should aim at customer satisfaction 5. only quantum of sales matters

Last Answer : the seller should aim at customer satisfaction

The Prohibit manufacturers sale and import such equipment_______________. A) which is confirm to the standard B) which does not conform to the standard C) which is rejected. D) None of the above.

Description : The Prohibit manufacturers sale and import such equipment_______________. A) which is confirm to the standard B) which does not conform to the standard C) which is rejected. D) None of the above.

Last Answer : which does not conform to the standard

Next to Cotton the most valuable American export in 1860 was: (a) Cotton manufacturers (b) Tobacco (c) Wheat (d) Lumbe

Description : Next to Cotton the most valuable American export in 1860 was: (a) Cotton manufacturers (b) Tobacco (c) Wheat (d) Lumbe

Last Answer : (b) Tobacco

What is the tariff if an american textile company wants to sell to china?

Description : What is the tariff if an american textile company wants to sell to china?

Last Answer : answer:I found this article: http://www.sinomania.com/CHINANEWS/china-wto.html

Match column -I with column - II. Column-I Column-II A. Saprophyte (i) Symbiotic association of fungi with plant roots B. Parasite (ii) Decomposition of dead organic materials C. Lichens (iii) Living on living plants or animals D. Mycorrhiza (iv) Symbiotic association of algae and fungi Choose the correct answer from the options given below. (A) (B) (C) (D) (a) (ii) (iii) (iv) (i) (b) (i) (ii) (iii) (iv) (c) (iii) (ii) (i) (iv) (d) (ii) (i) (iii) (iv)

Description : Match column -I with column - II. Column-I Column-II A. Saprophyte (i) Symbiotic association of fungi with plant roots B. Parasite (ii) Decomposition of dead organic materials C. Lichens (iii) Living on living plants or animals D. ... (iii) (iv) (c) (iii) (ii) (i) (iv) (d) (ii) (i) (iii) (iv)

Last Answer : (a) (ii) (iii) (iv) (i)

Name two scripting standards which you will consider during automation testing?

Description : Name two scripting standards which you will consider during automation testing?

Last Answer : Two scripting stands that you need to consider during automation testing are ∙ Adequate indentation ∙ Uniform naming convention

State the objective of testing. Explain the role of BIS (Bureau of Indian Standards) in testing of electrical machines.

Description : State the objective of testing. Explain the role of BIS (Bureau of Indian Standards) in testing of electrical machines. 

Last Answer : 1. Objective of testing is to finding error/defects in machine/equipment/ product. 2. To confirm whether the results obtain during testing are within tolerance limits specified by BIS / ISS 3. To ... BIS/ISS specified standards. 5. To avoid in convinces & accidents BIS plays important role.  

Political unrest, budget overruns, size and complexity of the project Answer: B (8)Decision trees are best used for : 1. Determining the interaction of the amount at stake and the expected value 2. Association of the probabilities with the risk events 3. An illustration of how to see the interactions between decisions and the associated events 4. A flow chart which determines the standard deviation of the risk event

Description : Political unrest, budget overruns, size and complexity of the project  Answer: B  (8)Decision trees are best used for : 1. Determining the interaction of the amount at stake and the expected ... and the associated events  4. A flow chart which determines the standard deviation of the risk event

Last Answer : 3. An illustration of how to see the interactions between decisions and the associated events

What are some of the WORST Double Standards in our society today?

Description : What are some of the WORST Double Standards in our society today?

Last Answer : Not really the worst but body hair

What are some of the WORST Double Standards in our society today?

Description : What are some of the WORST Double Standards in our society today?

Last Answer : Not really the worst but body hair

The goal of corporate governance and business ethics education is to: A. Teach students their professional accountability and to uphold their personalIntegrity to society. B. Change the way in which ethics is taught to students. C. Create more ethics standards by which corporate professionals must operate. D. Increase the workload for accounting students.

Description : The goal of corporate governance and business ethics education is to: A. Teach students their professional accountability and to uphold their personalIntegrity to society. B. Change the ... standards by which corporate professionals must operate. D. Increase the workload for accounting students.

Last Answer : Create more ethics standards by which corporate professionals must operate.

The goal of corporate governance and business ethics education is to: A. Teach students their professional accountability and to uphold their personal B. Integrity to society. C. Change the way in which ethics is taught to students. D. Create more ethics standards by which corporate professionals must operate. E. Increase the workload for accounting students

Description : The goal of corporate governance and business ethics education is to: A. Teach students their professional accountability and to uphold their personal B. Integrity to society. C. Change ... standards by which corporate professionals must operate. E. Increase the workload for accounting students

Last Answer : C. Change the way in which ethics is taught to students.

The goal of corporate governance and business ethics education is to: A. Teach students their professional accountability and to uphold their personal Integrity to society. B. Change the way in which ethics is taught to students. C. Create more ethics standards by which corporate professionals must operate. D. Increase the workload for accounting students.

Description : The goal of corporate governance and business ethics education is to: A. Teach students their professional accountability and to uphold their personal Integrity to society. B. Change ... standards by which corporate professionals must operate. D. Increase the workload for accounting students.

Last Answer : C. Create more ethics standards by which corporate professionals must operate.