The ends from warp beam have to be drawn through which of the following part sequentially: a. Headles b. Shuttle c. Drawing d. Cloth beam

The ends from warp beam have to be drawn through which of the following part sequentially:
a. Headles
b. Shuttle
c. Drawing
d. Cloth beam
by

1 Answer

Answer :

a. Headles
by

Related questions

What is the full form of ASTM? a. American Society for Testing and Materials b. American Standards for Textile Matters c. Association for standardizing testing methods d. Association of Standard Textile Manufacturers

Description : What is the full form of ASTM? a. American Society for Testing and Materials b. American Standards for Textile Matters c. Association for standardizing testing methods d. Association of Standard Textile Manufacturers

Last Answer : a. American Society for Testing and Materials

What are the horizontal loops formed in knitting known as? a. Warps b. Wefts c. Courses d. Wales

Description : What are the horizontal loops formed in knitting known as? a. Warps b. Wefts c. Courses d. Wales

Last Answer : c. Courses

Arrange the knitting sequence in correct order 1. Needle falls, old loop rises closing latch of the needle 2. Needle is now ready to repeat cycle 3. Old loop is held on the stem of the needle. The latch is open 4. Old loop is cast off; new loop pushes the lap to open; needle rises and the new loop slides down to the stem of the needle 5. New loop is formed around the hook of the needle a. 2,1,5,3,4 b. 3,5,1,4,2 c. 3,5,4,1,2 d. 2,1,4,3,5

Description : Arrange the knitting sequence in correct order 1. Needle falls, old loop rises closing latch of the needle 2. Needle is now ready to repeat cycle 3. Old loop is held on the stem of the needle. The latch is open 4. Old loop is cast off; new ... a. 2,1,5,3,4 b. 3,5,1,4,2 c. 3,5,4,1,2 d. 2,1,4,3,5

Last Answer : b. 3,5,1,4,2

2/40s yarn describes: a. Single yarn b. Spun Yarn c. Monofilament Yarn d. Plied yarn

Description : 2/40s yarn describes: a. Single yarn b. Spun Yarn c. Monofilament Yarn d. Plied yarn

Last Answer : d. Plied yarn

Indirect yarn numbering is expressed as: a. Yarn Count b. Denier c. Tex d. Microdenier

Description : Indirect yarn numbering is expressed as: a. Yarn Count b. Denier c. Tex d. Microdenier

Last Answer : a. Yarn Count

Retting is used in the processing of which of the following fibres: a. Cotton b. Linen c. Silk d. Viscose rayon

Description : Retting is used in the processing of which of the following fibres: a. Cotton b. Linen c. Silk d. Viscose rayon

Last Answer : b. Linen

Example of natural plant fibre: a. Silk b. Cotton c. Viscose rayon d. Polyester

Description : Example of natural plant fibre: a. Silk b. Cotton c. Viscose rayon d. Polyester

Last Answer : b. Cotton

Which of the following is not a primary essential property of a fibre? a. Flexibility b. Tensile strength c. Absorbency d. Cohesiveness

Description : Which of the following is not a primary essential property of a fibre? a. Flexibility b. Tensile strength c. Absorbency d. Cohesiveness

Last Answer : c. Absorbency

Pick up the incorrect statement from the following a. The activity which consumes maximum time, is called a node b. The activity is the time consuming part of a project c. The beginning and end of a job, are called events d. Logically and sequentially connected activities and events form a network

Description : Pick up the incorrect statement from the following a. The activity which consumes maximum time, is called a node b. The activity is the time consuming part of a project c. The beginning ... of a job, are called events d. Logically and sequentially connected activities and events form a network

Last Answer : a. The activity which consumes maximum time, is called a node

Pick up the incorrect statement from the following: (A) The activity is the time consuming part of a project (B) The beginning and end of a job, are called events (C) The activity which consumes maximum time, is called a node (D) Logically and sequentially connected activities and events form a network

Description : Pick up the incorrect statement from the following: (A) The activity is the time consuming part of a project (B) The beginning and end of a job, are called events (C) The activity ... maximum time, is called a node (D) Logically and sequentially connected activities and events form a network

Last Answer : (C) The activity which consumes maximum time, is called a node

What is meant by the term antenna bandwidth A. Antenna length divided by the number of elements. B. The angle between the half-power radiation points C. The frequency range over which and antenna can be expected to perform well D. The angle formed between two imaginary line drawn through the ends of the elements

Description : What is meant by the term antenna bandwidth A. Antenna length divided by the number of elements. B. The angle between the half-power radiation points C. The frequency range over which and antenna ... perform well D. The angle formed between two imaginary line drawn through the ends of the elements

Last Answer : C. The frequency range over which and antenna can be expected to perform well

Criminal Sketch Artists, what is the most unique drawing you've drawn from a description?

Description : Criminal Sketch Artists, what is the most unique drawing you've drawn from a description?

Last Answer : Need Answer

A bag contains 7 red and 5 green balls. The probability of drawing all four balls asred balls, when four balls are drawn at random is -Maths 9th

Description : A bag contains 7 red and 5 green balls. The probability of drawing all four balls asred balls, when four balls are drawn at random is -Maths 9th

Last Answer : (b) \(rac{7}{99}\)There are (7 + 5) = 12 balls in the bag. 4 balls can be drawn at random from 12 balls in 12C4 ways. ∴ n(S) = 12C4 = \(rac{|\underline{7}}{|\underline3|\underline4}\) = \(rac{7 imes6 imes5}{3 ... ) = 35∴ Required probability = \(rac{n(A)}{n(S)}\) = \(rac{35}{495}\) = \(rac{7}{99}\).

Write down the name of the freehand drawing tools which are using when custom shapes can be drawn. -Technology

Description : Write down the name of the freehand drawing tools which are using when custom shapes can be drawn. -Technology

Last Answer : Curve, Freeform and Scribble are the three freehand drawing tools which are using when custom shapes can be drawn.

The advantage of following the IEEE Standard for drawing up aProject Management Plan (SPMP) – see IEEE Standard 1059.1 1987 – is a) It is drawn up by representatives from major development organisations b) It is designed for all types of products c) It is a framework that can be used irrespective of process model or specific techniques d) It can be tailored for each organisation for a particular applicationarea, development team or technique. e) All of the above.

Description : The advantage of following the IEEE Standard for drawing up a Project Management Plan (SPMP) - see IEEE Standard 1059.1 1987 - is a) It is drawn up by representatives from major  ... each organisation for a  particular applicationarea, development team or  technique. e) All of the above.

Last Answer : e) All of the above.

A pack contains 4 blue, 2 red and 3 black pens. If a pen is drawn at random from the pack, replaced and the process repeated 2 more times, what is the probability of drawing 2 blue pens and 1 black pen? a) 16/243 b) 16/283 c) 14/243 d) 23/729

Description : A pack contains 4 blue, 2 red and 3 black pens. If a pen is drawn at random from the pack, replaced and the process repeated 2 more times, what is the probability of drawing 2 blue pens and 1 black pen? a) 16/243 b) 16/283 c) 14/243 d) 23/729

Last Answer : a) 16/243

A box contains 3red, 8 blue and 5 green marker pens. If 2 marker pens are drawn at random from the pack, not replaced and then another pen is drawn. What is the probability of drawing 2 blue marker pens and 1 red marker pen? a) 3/20 b) 1/20 c) 7/20 d) 9/20

Description : A box contains 3red, 8 blue and 5 green marker pens. If 2 marker pens are drawn at random from the pack, not replaced and then another pen is drawn. What is the probability of drawing 2 blue marker pens and 1 red marker pen? a) 3/20 b) 1/20 c) 7/20 d) 9/20

Last Answer : Answer: B) Probability of drawing 1 blue marker pen =8/16 Probability of drawing another blue marker pen = 7/15 Probability of drawing 1 red marker pen = 3/14 Probability of drawing 2 blue marker pens and 1 red marker pen = 8/16*7/15*3/14=1/20

Consider a pack contains 2black, 9 white and 3 pink pencils. If a pencil is drawn at random from the pack, replaced and the process repeated 2 more times, What is the probability of drawing 2 black pencils and 1 pink pencil? a)3/ 49 b)3/686 c)3/14 d)3/545

Description : Consider a pack contains 2black, 9 white and 3 pink pencils. If a pencil is drawn at random from the pack, replaced and the process repeated 2 more times, What is the probability of drawing 2 black pencils and 1 pink pencil? a)3/ 49 b)3/686 c)3/14 d)3/545

Last Answer : Answer: B) Here, total number of pencils = 14 Probability of drawing 1 black pencil = 2/14 Probability of drawing another black pencil = 2/14 Probability of drawing 1 pink pencil = 3/14 Probability of drawing 2 black pencils and 1 pink pencil = 2/14 * 2/14 * 3/14 = 3/686

If a Starfleet Officer dies, and is reincarnated as a member of a pre-warp civilisation, but retains all memories of her/his previous life, does the Prime Directive still apply to him?

Description : If a Starfleet Officer dies, and is reincarnated as a member of a pre-warp civilisation, but retains all memories of her/his previous life, does the Prime Directive still apply to him?

Last Answer : The Prime Directive doesn't seem to matter to those in the current non reincarnated Starfleet members. So no. However the Temporal prime directive might apply . I wonder about my own reincarnation If giving ... live a perfect life so that I am granted the freedom to make more changes to the thread.

You don't have to do a lot of 'splaining, but is "warp speed" (as in Star Trek) really possible in theory?

Description : You don't have to do a lot of 'splaining, but is "warp speed" (as in Star Trek) really possible in theory?

Last Answer : Not unless a lot of what we currently believe turns out to be false. The theory of special relativity tells us that it is impossible for anything with more mass than a proton to travel at light ... that would probably burn us to death (assuming we weren't crushed first by space-time itself).

You are in charge of selecting the destination of Earth's first warp-capable interstellar probe. Which of these two planets do you choose?

Description : You are in charge of selecting the destination of Earth's first warp-capable interstellar probe. Which of these two planets do you choose?

Last Answer : Planet A is some weird conspiracy theory that has no basis in fact. So check that out.

Would a warp-capable starship actually need a navigational deflector?

Description : Would a warp-capable starship actually need a navigational deflector?

Last Answer : answer:Is warp speed an absolute or a relative number? In other words, could a different ship (or celestial body, or whatever) go faster than warp speed? If it’s a relative speed, then having the deflector might well be useful.

How is it possible for a gravitational force to warp space-time around itself?

Description : How is it possible for a gravitational force to warp space-time around itself?

Last Answer : It's a little useless to speculate why a law of physics exists, isn't it? I don't think there's a reason; it's like asking why the speed of light is what it is. I guess it's arbitrary, ... whatever. Why does gravity warp spacetime? Fuck if i know, it just does. Maybe I don't understand the question.

When Humanity's first warp capable starship is completed, what should its name be?

Description : When Humanity's first warp capable starship is completed, what should its name be?

Last Answer : answer:USS Enterp____________ or maybe the “Speedy Gonzales”

Is it possible to warp the aluminum frame of an iPad by frequently holding it the same way?

Description : Is it possible to warp the aluminum frame of an iPad by frequently holding it the same way?

Last Answer : answer:It could have yes. I have worked with metal a lot over the years, specially sheet metal. and ultra thin aluminium is very easy to bend. most metals are if they are thin. aluminium is very ... anywhere near a heat source, such as the batery, then the heat would make it even easier to bend.

Time Warp! You've got 60 seconds to go back in time and speak to any age of your younger self... What do you say?

Description : Time Warp! You've got 60 seconds to go back in time and speak to any age of your younger self... What do you say?

Last Answer : …...err just a minute!

Does the Prime Directive only apply to pre-warp civilizations or not?

Description : Does the Prime Directive only apply to pre-warp civilizations or not?

Last Answer : I think the only logical answer is that he is Picard and thus can do whatever he wants. He’s kind of the Chuck Norris of the Star Trek universe.

Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded to the board may come loosened from the board. C. The circuit board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.

Description : Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded ... board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.

Last Answer : Answer: B

Pick up the constituent of good brick earth whose excess causes the raw bricks shrink and warp during drying and burning, from the following: (A) Alumina (B) Lime (C) Iron-oxide (D) Magnesia

Description : Pick up the constituent of good brick earth whose excess causes the raw bricks shrink and warp during drying and burning, from the following: (A) Alumina (B) Lime (C) Iron-oxide (D) Magnesia

Last Answer : Answer: Option A

Excess of alumina in brick earth makes the brick (A) Impermeable (B) Brittle and weak (C) To lose cohesion (D) To crack and warp on drying

Description : Excess of alumina in brick earth makes the brick (A) Impermeable (B) Brittle and weak (C) To lose cohesion (D) To crack and warp on drying

Last Answer : Answer: Option D

Why does she have to go to another office Mary goes to the doctor who determines she needs some blood drawn and an x-ray she ends up having to go to another office please explain to Mary why this is?

Description : Why does she have to go to another office Mary goes to the doctor who determines she needs some blood drawn and an x-ray she ends up having to go to another office please explain to Mary why this is?

Last Answer : Feel Free to Answer

What takes more total elapsed time? Torrenting sequentially or torrenting simultaneously?

Description : What takes more total elapsed time? Torrenting sequentially or torrenting simultaneously?

Last Answer : Theoretically, it should not make a difference. But practically, assuming sequential downloading, the torrents may not all download at full speed, due to seed and peer differences between them, so downloading simultaneously should be faster.

What numbers of items cannot be listed sequentially in 4 columns (see details)?

Description : What numbers of items cannot be listed sequentially in 4 columns (see details)?

Last Answer : Wow…watching!

How can i control 4 sprinkler valves so that they actuate sequentially every 2-3 minutes, one at a time?

Description : How can i control 4 sprinkler valves so that they actuate sequentially every 2-3 minutes, one at a time?

Last Answer : Rewire the timer circuitry on a rainbird?

…………. is a field which is used as a primary key and numbers each record sequentially. -Technology

Description : …………. is a field which is used as a primary key and numbers each record sequentially. -Technology

Last Answer : AutoNumberis a field which is used as a primary key and numbers each record sequentially.

The rate of the reaction is influenced by the hyperconjugation effect of group R. If R is sequentially `CH_(3)^(-)` (II) `CH_(3)-CH_(2)` (III) `CH_(3)

Description : The rate of the reaction is influenced by the hyperconjugation effect of group R. If R is sequentially `CH_(3)^(-)` (II) `CH_(3)-CH_(2)` (III) `CH_(3)

Last Answer : The rate of the reaction is influenced by the hyperconjugation effect of group R. If R is sequentially `CH_(3)^(-)` ... ii) D. (iii), (ii), (i), (iv)

In latest generation computers, the instructions are executed A) Parallel only B) Sequentially only C) Both sequentially and parallel D) All of above

Description : In latest generation computers, the instructions are executed A) Parallel only B) Sequentially only C) Both sequentially and parallel D) All of above

Last Answer : Answer : C

In latest generation computers, the instructions are executed a. Parallel only b. Sequentially only c. Both sequentially and parallel d. All of above

Description : In latest generation computers, the instructions are executed a. Parallel only b. Sequentially only c. Both sequentially and parallel d. All of above

Last Answer : Both sequentially and parallel

As the molecular weight of alkanes increases, how do the boiling point and melting point change? (a) boiling point increases ; melting point increases. (b) boiling point increases ; melting point increases. (c) boiling point increases ; melting point decreases (d) boiling point increases ; melting point increases sequentially for alkanes over four carbons.

Description : As the molecular weight of alkanes increases, how do the boiling point and melting point change? (a) boiling point increases ; melting point increases. (b) boiling point increases ; ... decreases (d) boiling point increases ; melting point increases sequentially for alkanes over four carbons.

Last Answer : boiling point increases ; melting point increases sequentially for alkanes over four carbons.

In latest generation computers, the instructions are executed a. Parallel only b. Sequentially only c. Both sequentially and parallel d. All of above

Description : In latest generation computers, the instructions are executed a. Parallel only b. Sequentially only c. Both sequentially and parallel d. All of above

Last Answer : c. Both sequentially and parallel

A large amalgam core is to be condensed around several pins in a vital molar tooth; what type of amalgam mix would you prefer: A. A large mix to ensure homogeneity B. A large with extra mercury to give easier manipulative qualities C. Several small mixes, sequentially triturated D. Several small mixes with varying mercury/alloy ratios E. A basic mix to which additional mercury is added as needed

Description : A large amalgam core is to be condensed around several pins in a vital molar tooth; what type of amalgam mix would you prefer: A. A large mix to ensure homogeneity B. A large with ... small mixes with varying mercury/alloy ratios E. A basic mix to which additional mercury is added as needed

Last Answer : C. Several small mixes, sequentially triturated

In latest generation computers, the instructions are executed a. Parallel only b. Sequentially only c. Both sequentially and parallel d. All of above

Description : In latest generation computers, the instructions are executed a. Parallel only b. Sequentially only c. Both sequentially and parallel d. All of above

Last Answer : c. Both sequentially and parallel

If the positive and negative shear force diagram areas are not equal, it can be concluded that a.shear force diagram has been wrongly drawn b.there is at least one couple acting on the beam c.107 dynes d.there are at least two maxima for bending moment e.bending moment does not change sign

Description : If the positive and negative shear force diagram areas are not equal, it can be concluded that a.shear force diagram has been wrongly drawn b.there is at least one couple acting on the beam c.107 dynes d.there are at least two maxima for bending moment e.bending moment does not change sign

Last Answer : b. there is at least one couple acting on the beam

A beam fixed at both ends with a central load W in the middle will have zero bending moment at a.one place b.two places c.no where d.three places e.107 dynes

Description : A beam fixed at both ends with a central load W in the middle will have zero bending moment at a.one place b.two places c.no where d.three places e.107 dynes

Last Answer : b. two places

The width of a beam of uniform strength having a constant depth d length L, simply supported at the ends with a central load W is (A) 2WL/3fd² (B) 3WL/2fd² (C) 2fL/3Wd 4 (D) 3fL²/2Wd

Description : The width of a beam of uniform strength having a constant depth d length L, simply supported at the ends with a central load W is (A) 2WL/3fd² (B) 3WL/2fd² (C) 2fL/3Wd 4 (D) 3fL²/2Wd

Last Answer : (B) 3WL/2fd²

The section modulus of a rectangular light beam 25 metres long is 12.500 cm3 . The beam is simply supported at its ends and carries a longitudinal axial tensile load of 10 tonnes in addition to a point load of 4 tonnes at the centre. The maximum stress in the bottom most fibre at the mid span section, is (A) 13.33 kg/cm2 tensile (B) 13.33 kg/cm2 compressive (C) 26.67 kg/cm2 tensile (D) 26.67 kg/cm2 compressive

Description : The section modulus of a rectangular light beam 25 metres long is 12.500 cm3 . The beam is simply supported at its ends and carries a longitudinal axial tensile load of 10 tonnes in addition to a point load of ... 13.33 kg/cm2 compressive (C) 26.67 kg/cm2 tensile (D) 26.67 kg/cm2 compressive

Last Answer : (C) 26.67 kg/cm2 tensile

A beam of length L is pinned at both ends and is subjected to a concentrated bending couple of moment M at its centre. The maximum bending moment in the beam is (A) M (B) M/2 (C) M/3 (D) ML/2

Description : A beam of length L is pinned at both ends and is subjected to a concentrated bending couple of  moment M at its centre. The maximum bending moment in the beam is  (A) M (B) M/2  (C) M/3  (D) ML/2 

Last Answer : (A) M

For a beam having fixed ends, the unknown element of the reactions, is (A) Horizontal components at either end (B) Vertical components at either end (C) Horizontal component at one end and vertical component at the other (D) Horizontal and vertical components at both the ends

Description : For a beam having fixed ends, the unknown element of the reactions, is  (A) Horizontal components at either end  (B) Vertical components at either end  (C) Horizontal component at one end and vertical component at the other  (D) Horizontal and vertical components at both the ends 

Last Answer : (D) Horizontal and vertical components at both the ends 

While testing a cast iron beam (2.5 cm × 2.5 cm) in section and a metre long simply supported at the ends failed when a 100 kg weight is applied at the centre. The maximum stress induced is: (A) 960 kg/cm2 (B) 980 kg/cm2 (C) 1000 kg/cm2 (D) 1200 kg/cm2 Answer: Option

Description : While testing a cast iron beam (2.5 cm × 2.5 cm) in section and a metre long simply supported at  the ends failed when a 100 kg weight is applied at the centre. The maximum stress induced is:  (A) 960 kg/cm2 (B) 980 kg/cm2 (C) 1000 kg/cm2 (D) 1200 kg/c

Last Answer : (A) 960 kg/cm