Description : 24 pumps are connected to a tank. Some of them are inlet pumps and the others are outlet pumps. Each of the inlet pumps an fill the tank in 16hours and each of the outlet pumps can empty the tank completely in ... gets filled in 48 hours. How many inlet pumps are there? A) 16 B) 18 C) 17 D) 14
Last Answer : D (x/16)-[(24-x)/12] = 1/48 x/16-24/48+x/12=1/48 (3+4)x/48=97/48 7x/48=97/48 7x=97 X=14
Description : The pressure exerted by a stationary liquid kept in a container at any point inside the liquid is known as ________ pressure. a)atmospheric b)hydrostatic c) air d)none
Last Answer : b)hydrostatic
Description : Why camphor disappears when kept on a plate? (a) It sublimes (b) It reacts with the metal of the container (c) It reacts with the gases of the air (d) None of the above
Last Answer : Ans:(a)
Description : Give reason: Water kept in porcelain container will not get cooled if it is glazed.
Last Answer : Glazing plugs the pores present in porcelain articles. If pores are present, water oozes from these pores and gets evaporated. This has a cooling effect on the water inside, As the pores are plugged, water does not get evaporated hence no cooling.
Description : Radioactive materials should be kept in the container made of : (1) Fe (2) Al (3) Pb (4) Steel
Last Answer : (4) Steel Explanation: Radioactive materials are first encased in resin or concrete and sealed in steel drums. The drums are then packed into concrete casks and placed in concrete trenches up to 18 metres deep.
Description : A fluid is a substance, that (A) Has to be kept in a closed container (B) Is almost incompressible (C) Has zero shear stress (D) Flows when even a small shear is applied to it
Last Answer : (D) Flows when even a small shear is applied to it
Last Answer : Steel
Description : Three pipes, A, B, & C are attached to a tank. A & B can fill it in 20 & 30 minutes respectively while C can empty it in 15 minutes. If A, B & C are kept open successively for 1 minute each, how soon will the tank be filled?
Last Answer : Answer: 167 minutes.
Description : Two pumps P & Q can fill a tank in 12 mins and 15 mins respectively while a third pipe R can empty the full tank in 6 mins. P & Q kept open for 5 mins in the beginning and then R is also opened. In what time is tank emptied? A) 30mins B) 35mins C) 40mins D) 45 mins
Last Answer : D Part filled in 5 min = 5(1/12 +1/15) = 5*9/60 = ¾ Part emptied in 1 min when all the pumps are opened, = 1/6 – (1/12 + 1/15) = 1/6 – 3/20 = 1/60 Now 1/60 is part emptied in 1 min Therefore ¾ part will be emptied in 60 * ¾ = 45 mins
Description : Pipe A can fill a water tank in 8 hours, Pipe B can fill the same tank in 12 hours and Pipe C can empty the tank in 24 hours. If all three pipes are opened together, in how many hours will the tank be completely filled or empty? a) 4.8 hours b) 5 hours c) 5.4 hours d) 6 hours e) 7.2 hours
Last Answer : If all the three pipes are opened together, in one hour they will fill 1/8 + 1/12 – 1/24 = (3+2-1)/24 = 1/6 part of tank. So, to fill it completely it will take 6 hours. Answer is: d)
Description : A tap can fill a bunker in 4 hours. After half the bunker is filled, three more similar tap are opened. What is the total time taken to fill the bunker completely? A) 3 hours B) 2.5 hours C) 5 hours D) 4.2hours
Last Answer : B In One hour tap can fill = 1/4 Time is taken to fill half of the bunker = 1/2 * 4= 2hours Part filled by four taps in one hour = (4*1/4) = 1 Required Remaining Part = 1/2 Total time = 2+ 1 /2=2.5 hrs
Description : A pump can fill a cistern in 12 hrs. After half the cistern is filled, 3 more similar pumps are opened. What is the total time taken to fill the cistern completely? A) 8 hrs B) 4 hrs C) 2hrs D) 7.5 hrs
Last Answer : D Time taken by 1 pump to fill tha half tank = 6 hrs Part filled by the 4 pumps in 1 hr = 4 * 1/12 =1/12 =>1/3 Remaining part = (1 – 1/2)= 1/2 Therefore 1/3 :1/2 :: 1:x X=1.5 hrs So total time takem = 6hrs + 1.5 hrs = 7.5 hrs.
Description : A tube can fill a tank completely in 18 hours. After half the tank is filled , one more similar tube is opened. What is the total time taken to fill the tank completely ? A) 14hrs 20min B) 13hrs 30min C) 13hrs 10min D) 14hrs 30min
Last Answer : C A tube can fill the half tank in 9hrs Now another similar tube opened 1/18+1/18 = 2/18 = 1/9 Remaining half tank filled in 4.5hrs Total time = 9+4.5 =13.5 = 13hrs 30min
Description : A tube can fill a cistern in 18hrs.After half the cistern is filled, three more similar tubes are opened. What is the total time taken to fill the cistern completely ? A) 9hrs 52min B) 10hrs 15 min C) 9hrs 45 min D) 10hrs 30min
Last Answer : Time taken to fill half of the cistern = 18/2 = 9 hrs After half the cistern is filled , three more similar tubes are opened. We know that one tube can in 18 hrs can fill = V litres(i.e. fully fill a cistern) ... V/2 will be 2 hrs 15 min Total time = 9 hrs + 2 hrs + 15 min = 11 hrs 15 min
Description : Faucet 'P' can fill the tank completely in12 hrs while faucet'q' can empty it by 24 hrs. By mistake, Anitha forgot to close the faucet q', As a result, both the faucet remained open. After 8 hrs, faucet realized the ... '. In how much time now onwards, would the tank be full? A) 4 B) 8 C) 12 D) 16
Last Answer : Answer: B Explanation: Faucet P can fill the tank completely in 12 hours => In 1 hour, Faucet P can fill 1/12of the tank Faucet q can empty the tank completely in 24 hours => In 1 hour, Faucet q can empty ... tank. Time taken to fill the remaining (1−1/3)=2/3of the tank =(2/3)/(1/12) = 8 hours
Description : what’s one show that you were completely disgusted with, but kept watching anyway?
Last Answer : Really really reallyyyyy hate friends
Description : Has anyone ever kept a completely unconventional pet before?
Last Answer : [at]cage: that is TERRIFYING. (it required the yelling)
Description : A glass bottle completely filled with water is kept in the freezer. Why does it crack?
Last Answer : A glass bottle completely filled with water is kept in the freezer. Why does it crack? (A) ... expands on freezing (D) Water contracts on freezing
Description : If a substance is kept at atmospheric pressure what is its phase of matter completely depend on?
Last Answer : Need answer
Description : How would you argue that liquid water is lighter than solid ice, when both are compared in the same full 16oz container before and after freezing?
Last Answer : It’s DENSER
Description : What does the value of pressure in a point of a fixed liquid in a container not depend on ?
Last Answer : The value of pressure at any point of a fixed liquid in a container does not depend on the area of the container.
Description : What happens if pressure is applied to any part of the liquid contained in the container ?
Last Answer : If pressure is applied to any part of the liquid contained in the container, pressure will be applied evenly on all sides of the substance.
Description : What physical properties of liquid that make them stick in a container?
Last Answer : The intermolecular forces in liquids are not so strong as in solids and liquids take the form of the container.
Description : How big is a 2 liter liquid nitrogen container?
Last Answer : About twice the size of a 2 liter soda bottle. Liquid nitrogen is extremely cold- the container must be vacuum insulated, or the liquid nitrogen quickly turn to gas.
Description : What liquid can I pour into a container to turn what’s inside into a crystal?
Last Answer : I remember seeing an IG video where a guy poured some liquid into a mason jar that had some stuff inside and it solidified and he carved it to look like a crystal. What is the liquid and is it publicly available?
Description : Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A ... compound is defined as the heat of reaction leading to the formation of the compound from its reactants
Last Answer : (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants
Description : Surface tension of liquids is the result of which the following: w) interaction of a liquid with its container x) unbalanced forces on the liquid's surface molecules y) adhesive forces of the liquid z) interaction of the liquid's surface molecules and the applied pressure
Last Answer : ANSWER: X -- UNBALANCED FORCES ON THE LIQUID'S SURFACE MOLECULES
Description : A container contains a mixture of two liquids P and Q in the ratio 7 : 5. When 9 litres of mixture are drawn off and the container is filled with Q, the ratio of P and Q becomes 7 : 9. How many litres of liquid P was contained in the container initially? a) 12 b) 21 c) 93 d)17 e) None
Last Answer : B Let initial quantity of P in the container be 7x and initial quantity of Q in the container be 5x Now 9 litres of mixture is drawn off from the container. Quantity of P in 9 litres of the mixture drawn off ... = 7 : 9 x=16* 21/4*28 Litres of P contained in the container initially =7x = 21
Description : P shows a basic schematic of how an airbrush works. In the options, the green sections are seals. Of these options, which of the design concepts of an airbrush will work continuously until the liquid in the container is exhausted up to the dotted line?
Last Answer : C,D
Description : What kind of equipment does Coke use to fill the liquid soda into cans and bottles?
Last Answer : Bottlers use industrial strength bottling machines. These consist of air pressure and hoses to fill the bottles. Coke uses industrial strength equipment ot fill the cans and bottles. These consist of hoses and air pressure.
Description : Three pipes P, Q and R can fill a tank from empty to full in 40 minutes, 15 minutes, and 30 minutes respectively. When the tank is empty, all the three pipes are opened. P, Q and R discharge chemical solutions X, Y and Z respectively. ... 5 minutes? a) 8 / 15 b) 7 / 15 c) 8 / 17 d) 6 / 13 e) 8 / 13
Last Answer : a Part of the tank filled by pipe P in 1 minute = 1 / 40 Part of the tank filled by pipe Q in 1 minute = 1 / 15 Part of the tank filled by pipe R in 1 minute = 1/ 30 Here we have to find the proportion of ... together in 5 minute = 5 1/8 = 5/ 8 Required proportion = (1/3) / ( 5/8) = 8 / 15
Description : 3 faucet A,B,C can fill a cistern from empty to full in 45mins, 35mins, and 25 mins respectively. When the cistern is empty all the 3 faucets are opened. A,B,c discharge chemical solutions A,B,C respectively. What is ... the liquid in the tank after 5 mins? A) 63/143 B) 72/151 c) 67/173 D) 81/167
Last Answer : A Part filled by (A+B+C) in 5 mins = 5(1/45 +1/35 + 1/25) = 5 (35+45+63/1575) = 143/315 Part filled by c in 5 mins = 5/25 = 1/5 Required ratio = 1/5 * 315/143 =63/143.
Description : Take a 250 mL beaker/glass tumbler. Fill half of it with water. Now carefully cut a small piece of sodium metal. Dry it using filter paper and wrap it in a small piece of cotton. Put the sodium piece wrapped in cotton into the beaker. Observe carefully. -Science
Last Answer : On touching the beaker, it was felt hot. The solution turns the red litmus paper to blue which shows it is basic in nature. Blue litmus paper do not show any colour change with the solution.
Description : Fill in the blanks in the following statements (a) Rutherford’s α-particle scattering experiment led to the discovery of the ——— -Science
Last Answer : Rutherford’s α-particle scattering experiment led to the discovery of the nucleus
Description : science Topic : Metals Fill in the blanks.
Last Answer : 1. An example of a liquid metal is Mercury/gallium. 2. A metal which is soft is sodium. 3. A metal which lacks ductility is sodium. 4. A non-metal which is lustrous is graphite/iodine ... 59. Aluminium+ copper+ magnesium+ manganese is useful in making aircraft bodies. 60. Ornamental gold is an alloy
Description : A capillary tube is kept vertical in a beaker containing liquid. The height to which the liquid rises by capillary action is increased if (a) The radius of the capillary is large (b) The radius of the ... small (c) The density of the liquid is large (d) The surface tension of the liquid is small
Last Answer : Ans:(b)
Description : Sodium metal is kept under which liquid
Last Answer : Kerosene
Description : For absorbing a sparingly soluble gas in a liquid (A) Gas side mass transfer co-efficient should be increased (B) Liquid side mass transfer co-efficient should be increased (C) Liquid side mass transfer co-efficient should be decreased (D) Mass transfer co-efficient must be kept constant
Last Answer : (B) Liquid side mass transfer co-efficient should be increased
Description : A hot liquid is kept in a big room. The logarithm of the numerical valueof the temperature difference between the liquid and the room is plotted against time. The plot will be very nearly a/an (A) Ellipse (B) Straight line (C) Parabola (D) Circular arc
Last Answer : (B) Straight line
Description : Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at ... flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C
Last Answer : (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C
Description : Potassium is kept & transported under (A) Water (B) Liquid ammonia (C) Kerosene oil (D) Alcohol
Last Answer : (C) Kerosene oil
Description : During the absorption of HCl gas in water (to produce liquid HCl), the gas is kept above dew point to (A) Increase the rate of absorption (B) Avoid corrosion (C) Reduce the cooling water circulation rate (D) None of these
Last Answer : (B) Avoid corrosion
Description : Why and when does a current carrying conductor kept in a magnetic field experience force? List the factors on which direction of this force depends? -Science
Last Answer : The drifting of free electrons of a conductor in a definite direction causes the current to flow through it. When such conductor is placed in a uniform magnetic field, each drifted electron of a ... depends on (i) direction of current through the conductor, and (ii) direction of magnetic field.
Description : What was one way Renaissance artists kept their new focus on science accuracy while still getting paid by the church to paint?
Last Answer : They painted religious themes indirectly by using everydaypeople and life to represent religious scenes and messages
Description : What was one way renaissance artist kept their new focus on science accuracy while getting paid by the church to paint?
Description : In case of steam distillation, the steam leaving the liquid is not completely saturated with distillate vapour, because (A) Temperature is less (B) Total pressure is less (C) Mixing of steam ... not so intimate as to result in equilibrium condition (D) Saturated steam is used for steam distillation
Last Answer : (C) Mixing of steam with the material being vaporised is not so intimate as to result in equilibrium condition
Description : If the solubilities of different components (in a liquid-liquid extraction system) increase with rise in temperature, then the temperature above which they dissolve completely is known as the critical solution ... On heating, a vapor phase will appear; while on cooling, a solid phase will appear
Last Answer : (D) On heating, a vapor phase will appear; while on cooling, a solid phase will appear
Description : In a liquid-liquid extraction, 10 kg of a solution containing 2 kg of solute C and 8 kg of solvent A is brought into contact with 10 kg of solvent B. Solvent A and B are completely immiscible in each other whereas ... (C) Less than 1 kg of C is transferred to B (D) No amount of C is transferred to B
Last Answer : (A) The entire amount of C is transferred to solvent B
Description : In a distillation operation, what is the effect of the temperature of the reflux stream (given below) on the condenser and reboiler loads? Reflux conditions: (i) Reflux stream is completely liquid ... D) Both condenser and reboiler loads are higher in case (ii) as compared to case (i)
Last Answer : (D) Both condenser and reboiler loads are higher in case (ii) as compared to case (i)
Description : In a gas-liquid absorption column, for obtaining the maximum absorption efficiency (A) Liquid stream should be distributed uniformly (B) Gas stream should be distributed uniformly ... well as liquid streams should be distributed uniformly (D) By passing should be completely avoided
Last Answer : (C) Both gas as well as liquid streams should be distributed uniformly