The most suitable material for transformer core is

The most suitable material for transformer core is 

(1) hot rolled grain oriented steel (2) cold rolled grain oriented steel (3) aluminium (4) copper
by

3 Answers

Answer :

2
by

Answer :

(2) cold rolled grain oriented steel
by

Answer :

cold rolled grain oriented steel
by

Related questions

Where is core type and shell type construction suitable for a transformer?

Description : Where is core type and shell type construction suitable for a transformer?

Last Answer : Core type transformers are popular in High voltage applications like Distribution transformers, Power transformers, and obviously auto transformers. Where as, Shell type transformers are ... voltage applications like transformers used in electronic circuits and power electronic converters etc

The best material for the core of a transformer is – (1) stainless steel (2) mild steel (3) hard steel (4) soft iron

Description : The best material for the core of a transformer is – (1) stainless steel (2) mild steel (3) hard steel (4) soft iron

Last Answer : (4) soft iron Explanation: Iron has a very large magnetic response: it greatly amplifies an applied magnetic field. The transformer's ability to transfer energy depends on the strength of the magnetic ... field is amplified. The input energy can then be lower while still having the same effect.

Which of the following properties is not necessarily desirable in the material for transformer core? A. Mechanical strength B. Low hysteresis loss C. High thermal conductivity D. High permeability

Description : Which of the following properties is not necessarily desirable in the material for transformer core? A. Mechanical strength B. Low hysteresis loss C. High thermal conductivity D. High permeability

Last Answer : C) high thermal conductivity

Material used for construction of transformer core is usually A. 0.4mm to 0.5 mm B. 4mm to 5 mm C. 14mm to 15 mm D. 25mm to 40 mm

Description : Material used for construction of transformer core is usually A. 0.4mm to 0.5 mm B. 4mm to 5 mm C. 14mm to 15 mm D. 25mm to 40 mm

Last Answer : d) 25mm to 40mm

The best material for the core of a transformer is (1) stainless steel (2) mild steel (3) hard steel (4) soft iron

Description : The best material for the core of a transformer is (1) stainless steel (2) mild steel (3) hard steel (4) soft iron

Last Answer : soft iron

For a pulse transformer, the material used for its core and the possible turn ration from primary to secondary

Description : For a pulse transformer, the material used for its core and the possible turn ration from primary to secondary are respectively   (A) ferrite : 20 : 1 (B) laminated iron : 1 :1 (C) ferrite : 1 : 1 (D) powered iron : 1: 1

Last Answer : For a pulse transformer, the material used for its core and the possible turn ration from primary to secondary are respectively ferrite : 1 : 1

The desirable properties of transformer core material are

Description : The desirable properties of transformer core material are  (1) low permeability and low hysteresis loss. (2) high permeability and high hysteresis loss. (3) high permeability and low hysteresis loss. (4) low permeability and hysteresis loss.

Last Answer : The desirable properties of transformer core material are high permeability and low hysteresis loss.

Material used for construction of transformer core is usually?

Last Answer : Material used for construction of transformer core is usually silicon steel.

The most suitable material for the central impervious core of a zoned embankment type dam is (A) Clay (B) Coarse sand (C) Silty clay (D) Clay mixed with fine sand

Description : The most suitable material for the central impervious core of a zoned embankment type dam is (A) Clay (B) Coarse sand (C) Silty clay (D) Clay mixed with fine sand

Last Answer : Answer: Option D

Which of the following is NOT a characteristic of glass ionomer cements? a. strong in compression but weaker in tension True b. the matrix is formed during the initial set of the cement c. sets via an ion exchange reaction that continues for at least 24 hours true d. suitable for use as a core build up material in anterior teeth

Description : Which of the following is NOT a characteristic of glass ionomer cements? a. strong in compression but weaker in tension True b. the matrix is formed during the initial set of the cement c. sets via ... for at least 24 hours true d. suitable for use as a core build up material in anterior teeth

Last Answer : d. suitable for use as a core build up material in anterior teeth

Compare core type and shell type transformer.

Description : Compare core type and shell type transformer.

Last Answer : Shell Type Transformer Core Type Transformer The core surround the windings  The Winding surround the core Magnetic Flux is distributed into 2 paths  Magnetic Flux has only ... in Weight  Less in Weight  It has two windows opening  It has one window opening

State the advantages of amorphous core type distribution transformer.

Description : State the advantages of amorphous core type distribution transformer.

Last Answer : Advantages of amorphous core type distribution transformer: 1) Increases efficiency of transformer as constant losses are reduced by 75 % compared to conventional transformers. 2) The material has high ... . 7) High Reliability. 8) Excellent short circuit capacity. 9) Less maintenance cost.

The main purpose of using core in a transformer is to

Description : The main purpose of using core in a transformer is to (A) decrease iron losses (B) eliminate magnetic hysteresis (C) reduce reluctance of the common magnetic circuit (D) prevent eddy current loss

Last Answer : Reduce Relucatnce of the common magnetic circuit.

The primary turns of a 444 V/222 V, 50 Hz single-phase transformer with a core cross- sectional area of...

Description : The primary turns of a 444 V/222 V, 50 Hz single-phase transformer with a core cross-sectional area of 100 cm2, and a maximum flux density of 1.0 T is (A) 100 (B) 200 (C) 222 (D) 400

Last Answer : The primary turns of a 444 V/222 V, 50 Hz single-phase transformer with a core cross-sectional area of 100 cm2, and a maximum flux density of 1.0 T is 200

The core of a transformer (medium size) uses to provide high flux densities

Description : The core of a transformer (medium size) uses to provide high flux densities (a) diamagnetic (c) ferromagnetic core (b) paramagnetic (d) none of these

Last Answer : The core of transformer is made up colled rolled grain oriented. It is a ferromagnetic material..

Laminations in the transformer core are provided to avoid

Description : Laminations in the transformer core are provided to avoid (a) continuous air gap (c) to reduce exiting current (b) to reduce the weight (d) to reduce copper losses

Last Answer : To reduce eddy current and hysterisis losses

Why does the core of a transformer need to be laminated?

Description : Why does the core of a transformer need to be laminated?

Last Answer : Transformer cores are laminated to reduce eddy current loss.

why the Transformer core is laminated?

Last Answer : Transformer core is laminated to reduce Eddy current losses.

State what is the significance of conducting phasing out test on a 3-phase transformer? Explain its procedure with a suitable connection diagram.

Description : State what is the significance of conducting phasing out test on a 3-phase transformer? Explain its procedure with a suitable connection diagram.

Last Answer : -Short primary & secondary winding of other phases expect the one under test. -Connect voltmeter to secondary winding. -A small DC current is circulated through the primary winding through ... . -The test repeated for finding out remaining concerned secondary windings in the same manner.

State the material used for making (1) Magnetic Core (2) Fuse element

Description : State the material used for making (1) Magnetic Core (2) Fuse element  

Last Answer : The material used for making of:  (1) Magnetic Core : Iron, cobalt, Nickel, CRGO, HRGO , silicon steel  (2) Fuse Element: Tin- lead wire, Tinned copper wire 

State functions of the armature core in DC machine and name material used for armature core.

Last Answer : Functions of armature core: 1) Support the armature winding which is placed in its slots. 2) Rotate as driven by the prime mover (generator) or as per the torque produced (motor).  Hence ... magnetic path to increase the magnitude of induced emf for a certain MMF created by the field winding. 

Of which irom is Core of transformer made up? -Do You Know?

Description : Of which irom is Core of transformer made up? -Do You Know?

Last Answer : answer:

What is the core of the transformer made of ?

Description : What is the core of the transformer made of ?

Last Answer : The core of the transformer is made of: The core of the transformer is usually made of a type of steel called silicon steel. Transformer cores are not usually made of normal stainless steel.

Why insulation or thin coating is used in the core of transformer ?

Description : Why insulation or thin coating is used in the core of transformer ?

Last Answer : In the core of a small transformer there are actually many ( E) and ( I) and different sized steel sheets of large size transformers. In fact, one type of varnish / lamination paint is applied on ... was a lot of voltage and drops. So insulation is used in the transformer to prevent this loss.

On what does the core loss of a transformer depend ?

Description : On what does the core loss of a transformer depend ?

Last Answer : The core loss of the transformer depends on the voltage applied to the primary.

What is a Core Type Transformer ?

Description : What is a Core Type Transformer ?

Last Answer : Answer : The core of this type of transformer is made up of a rectangular 'L' laminated steel sheet. It encloses most of the core space in the coils. Only one magnetic socket is made in the ... voltage windings are applied to the two opposite arms of such a core. It is called Core Type Transformer.

Of which irom is Core of transformer made up?

Description : Of which irom is Core of transformer made up?

Last Answer : – Soft iron

The harmonic currents in a power transformer does not cause increase in: a) Secondary voltage b) Core loss c) Copper loss d) Magnetic interference with protective relays

Description : The harmonic currents in a power transformer does not cause increase in: a) Secondary voltage b) Core loss c) Copper loss d) Magnetic interference with protective relays

Last Answer : Ans: A

Which of the listed electrical devices is represented by the symbol shown in the illustration? EL-0055 A. Fixed resistance resistor B. Coil with magnetic core C. DC motor or generator shunt field D. Transformer

Description : Which of the listed electrical devices is represented by the symbol shown in the illustration? EL-0055 A. Fixed resistance resistor B. Coil with magnetic core C. DC motor or generator shunt field D. Transformer

Last Answer : Answer: D

In replacing a defective transformer with a new one, which of the following actions must be carried out to insure proper operation of the equipment it serves? A. The secondary leads must be grounded for 10 minutes to remove static charges. B. The transformer connections must be made as before with regard to the indicated polarity. C. The iron core of the transformer must be flashed to pre-magnetize it. D. The iron core must be grounded for 10 minutes to remove any residual magnetism.

Description : In replacing a defective transformer with a new one, which of the following actions must be carried out to insure proper operation of the equipment it serves? A. The secondary leads must be grounded ... magnetize it. D. The iron core must be grounded for 10 minutes to remove any residual magnetism.

Last Answer : Answer: B

The hook-on AC volt-ammeter consists essentially of a split-core and a rectifiertype instrument connected to the secondary winding of a _____________. A. potential transformer B. control transformer C. current transformer D. reactance transformer

Description : The hook-on AC volt-ammeter consists essentially of a split-core and a rectifiertype instrument connected to the secondary winding of a _____________. A. potential transformer B. control transformer C. current transformer D. reactance transformer

Last Answer : Answer: C

When a transformer is used to step down voltage, the low voltage winding is _____________. A. part of the core B. the primary coil C. not insulated D. the secondary coil

Description : When a transformer is used to step down voltage, the low voltage winding is _____________. A. part of the core B. the primary coil C. not insulated D. the secondary coil

Last Answer : Answer: D

If a transformer is connected to a DC source, the transformer will overload at the ____________. A. contacts B. primary coil C. secondary coil D. core

Description : If a transformer is connected to a DC source, the transformer will overload at the ____________. A. contacts B. primary coil C. secondary coil D. core

Last Answer : Answer: B

Figure 'B' shown in the illustration represents a/an ____________. EL-0091 A. magnetic amplifier B. Scott-T transformer C. saturable-core reactor D. oil-filled toroid

Description : Figure 'B' shown in the illustration represents a/an ____________. EL-0091 A. magnetic amplifier B. Scott-T transformer C. saturable-core reactor D. oil-filled toroid

Last Answer : Answer: A

Figure 'A' shown in the illustration represents a/an _______________. EL-0091 A. magnetic amplifier B. Scott-T transformer C. saturable-core reactor D. oil-filled toroid

Description : Figure 'A' shown in the illustration represents a/an _______________. EL-0091 A. magnetic amplifier B. Scott-T transformer C. saturable-core reactor D. oil-filled toroid

Last Answer : Answer: C

The area of the yoke in a transformer is taken 15 to 20% larger than that of the core. Why?

Description : The area of the yoke in a transformer is taken 15 to 20% larger than that of the core. Why?

Last Answer : By keeping yoke area 15-20% higher ,the flux density in the yoke is reduced, resulting into reduction in iron losses for yoke. The reduced core area results working flux density and needed to increase the number of turns.

What is the purpose of laminating the core in a transformer?

Description : What is the purpose of laminating the core in a transformer?

Last Answer : In order to minimize eddy current loss.

What are the advantages of shell type transformer over core type transformers?

Description : What are the advantages of shell type transformer over core type transformers?

Last Answer : In shell type transformers the coils are well supported on the all sides and so they can withstand higher mechanical stresses developed during short circuit conditions. Also the leakage reactance will be less in shell type transformers.

Best Liquid for the Transformer core is–

Description : Best Liquid for the Transformer core is–

Last Answer : Soft Iron

In transformer, the core is made up of soft iron in order to pass the maximum A. flux B. current C. magnetic flux D. voltage

Description : In transformer, the core is made up of soft iron in order to pass the maximum A. flux B. current C. magnetic flux D. voltage

Last Answer : magnetic flux

Ratio of voltages is inverse ratio of the A. transformer B. resistor C. iron core D. current

Description : Ratio of voltages is inverse ratio of the A. transformer B. resistor C. iron core D. current

Last Answer : current

What are the types of transformer core?

Description : What are the types of transformer core?

Last Answer : a. Core type transformer core. b. Shell type transformer core. c. Berry type transformer core. d. Spiral type transformer core.

For V/F control, when frequency is increased in transformer a) Core loss component current increases, Magnetizing component current decreases b) Core loss component current increases, Magnetizing component current increases c) Core loss component current decreases, Magnetizing component current decreases d) Core loss component current decreases, Magnetizing component current increases

Description : For V/F control, when frequency is increased in transformer a) Core loss component current increases, Magnetizing component current decreases b) Core loss component current increases, ... component current decreases d) Core loss component current decreases, Magnetizing component current increases

Last Answer : Ans: Core loss component current decreases, Magnetizing component current decreases

72 Harmonics in transformer result in A. Increased core losses B. Increased I2R losses C. Magnetic interference with communication circuits D. All of the above

Description : 72 Harmonics in transformer result in A. Increased core losses B. Increased I2R losses C. Magnetic interference with communication circuits D. All of the above

Last Answer : D. All of the above

[53] The iron loss of the transformer is negligible during short circuit test because A. The entire input is just sufficient to meet Cu losses only B. Flux produced is a small fraction of the normal flux C. Iron core becomes fully saturated D. Supply frequency is held constant

Description : [53] The iron loss of the transformer is negligible during short circuit test because A. The entire input is just sufficient to meet Cu losses only B. Flux produced is a small fraction of the normal flux C. Iron core becomes fully saturated D. Supply frequency is held constant

Last Answer : B. Flux produced is a small fraction of the normal flux

49 The open circuit test is carried out in a transformer to find the A. Cu loss B. Core loss C. Total loss D. Insulation resistance

Description : 49 The open circuit test is carried out in a transformer to find the A. Cu loss B. Core loss C. Total loss D. Insulation resistance

Last Answer : B. Core loss

46 The core used in high frequency transformer is usually A. Copper core B. Cost iron core C. Air core D.Mid steel core

Description : 46 The core used in high frequency transformer is usually A. Copper core B. Cost iron core C. Air core D.Mid steel core

Last Answer : C. Air core

45 The function of conservator in a transformer is A. To protect against internal fault B. To reduce copper as well as core losses C. To cool the transformer oil D. To take care of the expansion and contraction of transformer oil due to variation of temperature of surroundings

Description : 45 The function of conservator in a transformer is A. To protect against internal fault B. To reduce copper as well as core losses C. To cool the transformer oil D. To take care of the expansion and contraction of transformer oil due to variation of temperature of surroundings

Last Answer : D. To take care of the expansion and contraction of transformer oil due to variation of temperature of surroundings

43 The purpose of providing an iron core in a transformer is to A.Provide support to windings B. Reduce hysteresis loss C. decrease the reluctance of the magnetic path D. reduce eddy current losses

Description : 43 The purpose of providing an iron core in a transformer is to A.Provide support to windings B. Reduce hysteresis loss C. decrease the reluctance of the magnetic path D. reduce eddy current losses

Last Answer : C. Decrease the reluctance of the magnetic path