Which amongst the following has a negative coefficient of temperature for resistance?

Which amongst the following has a negative coefficient of temperature for resistance? 

a) Copper b) Lead c) Carbon d) Aluminium
by

1 Answer

Answer :

Which amongst the following has a negative coefficient of temperature for resistance? Carbon 

by

Related questions

When temperature rises, resistance of negative temperature coefficient thermistor A. increases B. decreases C. zero D. infinity

Description : When temperature rises, resistance of negative temperature coefficient thermistor A. increases B. decreases C. zero D. infinity

Last Answer : decreases

Semi-conductors have ________ temperature coefficient of resistance. (A) Negative (B) Positive (C) Both positive and negative (D) None of the above

Description : Semi-conductors have ________ temperature coefficient of resistance. (A) Negative (B) Positive (C) Both positive and negative (D) None of the above

Last Answer : (A) Negative

Electronic Voltmeters which use rectifiers employ negative feedback. This is done -

Description : Electronic Voltmeters which use rectifiers employ negative feedback. This is done -  a) To increase the overall gain b) To improve stability c) To overcome non -linearity of the diodes d) None of the above

Last Answer : Electronic Voltmeters which use rectifiers employ negative feedback. This is done - To overcome non -linearity of the diodes

Define the term negative temperature coefficient.

Description : Define the term negative temperature coefficient.

Last Answer : It is the decrease in a semiconductor’s resistance as temperature rises.

Thermistor with high negative temperature coefficient are very accurate for measuring low temperature especially near is a. 10 K b. 70K c. 200K d. 35K

Description : Thermistor with high negative temperature coefficient are very accurate for measuring low temperature especially near is a. 10 K b. 70K c. 200K d. 35K

Last Answer : c. 200K

Which of the following has negative temperature coefficient?

Description : Which of the following has negative temperature coefficient? A. Brass B. Mercury C. Electrolytes D. Silver. 

Last Answer : Electrolytes has negative temperature coefficient.

What device is similar to an RTD but has a negative temperature coefficient?

Description : What device is similar to an RTD but has a negative temperature coefficient?  A) Strain gauge B) Thermistor C) Negative-type RTD D) Thermocouple

Last Answer : What device is similar to an RTD but has a negative temperature coefficients 

The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is

Description : The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is (A) 11% (B) 9% (C) 1.1% (D) 3%

Last Answer : The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is 11%

The effective resistance of a coil at high frequency is more than its de resistance on account of : -

Description :  The effective resistance of a coil at high frequency is more than its de resistance on account of : -  a) Skin effect b) Proximity effects c) Eddy current losses d) All the above

Last Answer :  The effective resistance of a coil at high frequency is more than its de resistance on account of : - All the above

A resistance potentiometer is a : -

Description : A resistance potentiometer is a : -  a) first order instrument b) zero order instrument c) second order instrument d) none of the above

Last Answer : A resistance potentiometer is a : - zero order instrument

The temperature coefficient of copper is `0.004^(@)C^(-1)`. Find the resistance of a 5 m long copper wire of diameter 0.2 mm at `100^(@)C`, if the res

Description : The temperature coefficient of copper is `0.004^(@)C^(-1)`. Find the resistance of a 5 m long copper wire of diameter 0.2 mm at `100^(@)C`, if the res

Last Answer : The temperature coefficient of copper is `0.004^(@)C^(-1)`. Find the resistance of a 5 m long copper wire of ... `0^(@)C` is `1.7xx10^(-8) Omega` m.

The temperature coefficient of a resistance wire is `0.00 12.5^(@)C^(-1)`. At 300 K, its resistance is `1 Omega`. At what temperature the resistance o

Description : The temperature coefficient of a resistance wire is `0.00 12.5^(@)C^(-1)`. At 300 K, its resistance is `1 Omega`. At what temperature the resistance o

Last Answer : The temperature coefficient of a resistance wire is `0.00 12.5^(@)C^(-1)`. At 300 K, its ... the resistance of the wire will be `2 Omega` ?

The temperature coefficient of resistance of the material of a wire is `0.00125^(@)C^(-1)`. Its resistance at `27^(@)C` is `1 Omega`. At what temperat

Description : The temperature coefficient of resistance of the material of a wire is `0.00125^(@)C^(-1)`. Its resistance at `27^(@)C` is `1 Omega`. At what temperat

Last Answer : The temperature coefficient of resistance of the material of a wire is `0.00125^(@)C^(-1)`. Its resistance at ... K B. 1100 K C. 1400 K D. 1127 K

The temperature coefficient of resistance of an alloy used for making resistor is

Description : The temperature coefficient of resistance of an alloy used for making resistor is

Last Answer : The temperature coefficient of resistance of an alloy used for making resistor is A. small and ... C. large and positive D. large and negative

The resistance of a bulb filmanet is `100Omega` at a temperature of `100^@C`. If its temperature coefficient of resistance be 0.005 per `.^@C`, its re

Description : The resistance of a bulb filmanet is `100Omega` at a temperature of `100^@C`. If its temperature coefficient of resistance be 0.005 per `.^@C`, its re

Last Answer : The resistance of a bulb filmanet is `100Omega` at a temperature of `100^@C`. If its temperature coefficient of ... . `200^(@)C` D. `400^(@)C`

The existing resistance of a conductor is dependent upon its length, cross-sectional area, _____________. A. temperature and insulation B. material and insulation C. resistive coefficient and material D. material and temperature

Description : The existing resistance of a conductor is dependent upon its length, cross-sectional area, _____________. A. temperature and insulation B. material and insulation C. resistive coefficient and material D. material and temperature

Last Answer : Answer: D

Which temperature coefficient indicates a material whose resistance increases as temperature increases?

Description : Which temperature coefficient indicates a material whose resistance increases as temperature increases?

Last Answer : Positive.

Define the temperature coefficient of resistance.

Description : Define the temperature coefficient of resistance.

Last Answer : The amount of increase in the resistance of a 1-ohm sample of the conductor per degree of temperature rise above 0º C

The fractional change in resistance per kelvin is known as, a. temperature coefficient of resistance b. coefficient of Voltage of charge c. thermal expansion d. all of above

Description : The fractional change in resistance per kelvin is known as, a. temperature coefficient of resistance b. coefficient of Voltage of charge c. thermal expansion d. all of above

Last Answer : a. temperature coefficient of resistance

Problem on temperature coefficient of resistance 3

Description : Problem on temperature coefficient of resistance 3

Last Answer : Problem on temperature coefficient of resistance 3

Problem on temperature coefficient of resistance 2

Description : Problem on temperature coefficient of resistance 2

Last Answer : Problem on temperature coefficient of resistance 2

Problem on temperature coefficient of resistance 1

Description : Problem on temperature coefficient of resistance 1

Last Answer : Problem on temperature coefficient of resistance 1

A semiconductor device made out of a material having very high temperature coefficient of resistance is

Description : A semiconductor device made out of a material having very high temperature coefficient of resistance is

Last Answer : A semiconductor device made out of a material having very high temperature coefficient of resistance is Thermistor

The resistance temperature coefficient is defined as

Last Answer : The resistance temperature coefficient is defined as the ratio of increase in resistance per degree centigrade to the resistance at 0oC.

A metal resistor has resistance of 10 ohm at 0°C and 11 ohms at 160°C, the temperature coefficient is

Last Answer : A metal resistor has resistance of 10 ohm at 0°C and 11 ohms at 160°C, the temperature coefficient is 0.000625 /°C.

A semiconductor has ………… temperature coefficient of resistance.

Last Answer : A semiconductor has Negative temperature coefficient of resistance.

The metal having the lowest temperature coefficient of resistance is

Description :  The metal having the lowest temperature coefficient of resistance is

Last Answer : The metal having the lowest temperature coefficient of resistance is gold.

what is the temperature coefficient of Resistance of conductor ?

Description : what is the temperature coefficient of Resistance of conductor ?

Last Answer : conductors have positive coefficient. means as the temperature increases resistance also increases.

what is the temperature coefficient of Resistance of semiconductor ?

Description : what is the temperature coefficient of Resistance of semiconductor ?

Last Answer : semiconductors have negative temperature coefficient of resistance. means as the temperature increases resistance decreases.

A bimetallic strip is used to convert a temperature change -

Description :  A bimetallic strip is used to convert a temperature change - a) into mechanical displacement b) into electrical displacement c) into neither mechanical nor electrical displacement d) all of the above

Last Answer :  A bimetallic strip is used to convert a temperature change - into mechanical displacement

Is it possible for a coefficient of variation to be negative Explain.?

Description : Is it possible for a coefficient of variation to be negative Explain.?

Last Answer : Of course it is! If the mean of a set of data is negative, thenthe coefficient of variation will be negative.

. Non-negativity condition in an LP model implies a. A positive coefficient of variables in objective function b. A positive coefficient of variables in any constraint c. Non-negative value of resources d. None of the above

Description : . Non-negativity condition in an LP model implies a. A positive coefficient of variables in objective function b. A positive coefficient of variables in any constraint c. Non-negative value of resources d. None of the above

Last Answer : d. None of the Above

What is the heat coefficient of resistance ?

Description : What is the heat coefficient of resistance ?

Last Answer : Answer : The coefficient of heat is the amount of radh that increases with the increase in temperature per ohm of radh.

A plantinum wire has resistance of `10 Omega` at `0^(@)C` and `20 Omega` at `273^(@)C`. Find the value of coefficient of resistance.

Description : A plantinum wire has resistance of `10 Omega` at `0^(@)C` and `20 Omega` at `273^(@)C`. Find the value of coefficient of resistance.

Last Answer : A plantinum wire has resistance of `10 Omega` at `0^(@)C` and `20 Omega` at `273^(@)C`. Find the value of coefficient of resistance.

Determine the viscous damping coefficient if damper offers resistance 0.05N at constant velocity 0.04m/sec A 0.8N-sec/m B 1.5N-sec/m C 2.5N-sec/m D 1.25N-sec/m

Description : Determine the viscous damping coefficient if damper offers resistance 0.05N at constant velocity 0.04m/sec A 0.8N-sec/m B 1.5N-sec/m C 2.5N-sec/m D 1.25N-sec/m

Last Answer : D 1.25N-sec/m

Coefficient of resistance is the ratio of (A) Actual velocity of jet at vena-contracta to the theoretical velocity (B) Area of jet at vena-contracta to the area of orifice (C) Loss of head in the orifice to the head of water available at the exit of the orifice (D) Actual discharge through an orifice to the theoretical discharge

Description : Coefficient of resistance is the ratio of (A) Actual velocity of jet at vena-contracta to the theoretical velocity (B) Area of jet at vena-contracta to the area of orifice (C) Loss ... available at the exit of the orifice (D) Actual discharge through an orifice to the theoretical discharge

Last Answer : Answer: Option C

Coefficient of discharge Cd is equal to (where Cc = Coefficient of contraction, Cv = Coefficient of velocity, and Cr = Coefficient of resistance) (A) Cc × Cv (B) Cc × Cr (C) Cv × Cr (D) Cc /Cr

Description : Coefficient of discharge Cd is equal to (where Cc = Coefficient of contraction, Cv = Coefficient of velocity, and Cr = Coefficient of resistance) (A) Cc × Cv (B) Cc × Cr (C) Cv × Cr (D) Cc /Cr

Last Answer : Answer: Option A

In a braking test, a vehicle travelling at 36 km ph was stopped at a braking distance of 8.0 m. The average value of the vehicle's skid resistance (friction coefficient) is (A) 0.64 (B) 6.25 (C) 0.16 (D) None of these

Description : In a braking test, a vehicle travelling at 36 km ph was stopped at a braking distance of 8.0 m. The average value of the vehicle's skid resistance (friction coefficient) is (A) 0.64 (B) 6.25 (C) 0.16 (D) None of these

Last Answer : Answer: Option C

Manganese steels (A) Are non-magnetic (B) Possess high electrical resistance (C) Possess low coefficient of expansion (D) All the above

Description : Manganese steels (A) Are non-magnetic (B) Possess high electrical resistance (C) Possess low coefficient of expansion (D) All the above

Last Answer : Answer: Option D

The transducer with negative temperature co-efficient of resistance is

Description : The transducer with negative temperature co-efficient of resistance is (A) Thermistor (B) Resistance Thermometer (C) Strain Gauge (D) Thermocouple

Last Answer : The transducer with negative temperature co-efficient of resistance is Thermistor

Which one of the following frequency meter is suitable for measuring radio frequency?

Description : Which one of the following frequency meter is suitable for measuring radio frequency?   (a) Vibrating reed frequency meter (b) Weston frequency meter (c) Electrical resonance frequency meter (d) Heterodyne frequency meter 

Last Answer : Which one of the following frequency meter is suitable for measuring radio frequency?   (a) Vibrating reed frequency meter (b) Weston frequency meter (c) Electrical resonance frequency meter (d) Heterodyne frequency meter 

Which of the following factors limit the deflection of the pointer of a PMMC instrument of about

Description : Which of the following factors limit the deflection of the pointer of a PMMC instrument of about 90o?  1. Its damping mechanism  2. Linearity of magnetic field in which the coil moves  3. Control spring arrangement  4. ... Only 1 and 3 (b) Only 2 and 4 (c) Only 2 and 3 (d) Only 1 and 4 

Last Answer : Which of the following factors limit the deflection of the pointer of a PMMC instrument of about 90o?  1. Its damping mechanism  2. Linearity of magnetic field in which the coil moves  3. Control spring arrangement  4. ... Only 1 and 3 (b) Only 2 and 4 (c) Only 2 and 3 (d) Only 1 and 4 

Torque/weight ratio of an instrument indicates

Description : Torque/weight ratio of an instrument indicates   (a) Selectivity (b) Accuracy (c) Fidelity (d) Sensitivity

Last Answer : Torque/weight ratio of an instrument indicates Sensitivity

Wagner's earth devices are used in AC bridge circuits for

Description : Wagner's earth devices are used in AC bridge circuits for (a) Eliminating the effect of earth capacitances (b) Eliminating the effect of intercomponent capacitances (c) Eliminating the effect of stray electrostatic fields (d) Shielding the bridge elements

Last Answer : Wagner's earth devices are used in AC bridge circuits for Eliminating the effect of earth capacitances

Loading effect is principally caused by instruments

Description : Loading effect is principally caused by instruments   (a) High resistance (b) Low sensitivity (c) High sensitivity (d) High range

Last Answer : B

Thermocouple instruments can be used for a frequency range upto

Description : Thermocouple instruments can be used for a frequency range upto   (a) 100Hz (b) 5000 Hz (c) 1 MHz (d) 50 MHz and above 

Last Answer : Thermocouple instruments can be used for a frequency range upto 50 MHz and above 

In a single phase induction energy meter, in order to obtain true value of energy, the shunt

Description : In a single phase induction energy meter, in order to obtain true value of energy, the shunt magnetic flux should lag behind the applied voltage by   (a) 90o (b) 0o (c) 45o (d) 60o

Last Answer : In a single phase induction energy meter, in order to obtain true value of energy, the shunt magnetic flux should lag behind the applied voltage by 90o

Gearing, blacklash, friction between moving parts and scale accuracies are generally known as

Description : Gearing, blacklash, friction between moving parts and scale accuracies are generally known as  (a) Instrument errors (b) Interference errors (c) Calibration errors (d) Interaction errors

Last Answer : Gearing, blacklash, friction between moving parts and scale accuracies are generally known as Instrument errors

If the distance of screen from a CRT to center of deflection plates is 15 cm, the length of

Description : If the distance of screen from a CRT to center of deflection plates is 15 cm, the length of deflection plates is 2 cm, the distance between the plates is 1 cm and accelerating voltage is 500 V, deflection sensitivity is   (a) 33.2 V/cm (b) 0.03 cm/V (c) 66.4 V/cm (d) 0.015 cm/V

Last Answer : If the distance of screen from a CRT to center of deflection plates is 15 cm, the length of deflection plates is 2 cm, the distance between the plates is 1 cm and accelerating voltage is 500 V, deflection sensitivity is 0.03 cm/V

The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is

Description : The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is 1200 rev/kWh. Power consumption in the load is (A) 1.2 kW (B) 1 kW (C) 600 W (D) 500 W

Last Answer : The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is 1200 rev/kWh. Power consumption in the load is 500 W