The area under stress-strain curve represents a.Hardness of material b.Breaking strength of the material c.Energy required to cause failure d.Toughness of material e.Malleabbility of material

The area under stress-strain curve represents a.Hardness of material b.Breaking strength of the material c.Energy required to cause failure d.Toughness of material e.Malleabbility of material
by

1 Answer

Answer :

c. Energy required to cause failure
by

Related questions

A cylindrical bar 10 metres long elongates 0.1 mm under a load. The strain in the material of the bar will be a.10--4 b.10--5 c.10--7 d.All of the above e.

Description : A cylindrical bar 10 metres long elongates 0.1 mm under a load. The strain in the material of the bar will be a.10--4 b.10--5 c.10--7 d.All of the above e.

Last Answer : b. 10--5

The breaking strength of a rope is 400 N. A fireman weighing 60 kg slides down the rope. The rope will break if a.107 dynes b.the acceleration is 7.5 m/s2 c.the acceleration is 1.2 m/s2 d.the acceleration is 3.1 m/s2 e.the slides with an acceleration of 15 m/s2

Description : The breaking strength of a rope is 400 N. A fireman weighing 60 kg slides down the rope. The rope will break if a.107 dynes b.the acceleration is 7.5 m/s2 c.the acceleration is 1.2 m/s2 d.the acceleration is 3.1 m/s2 e.the slides with an acceleration of 15 m/s2

Last Answer : c. the acceleration is 1.2 m/s2

Detrimental property of a material for shock load applications (a) High density (b) Low toughness (c) High strength (d) Low hardness

Description : Detrimental property of a material for shock load applications (a) High density (b) Low toughness (c) High strength (d) Low hardness  

Last Answer : (b) Low toughness

Weld decay will cause which of the following problems? a) A reduced resistance to corrosion b) a lower tensile strength c) The toughness is reduced d) The hardness will increase

Description : Weld decay will cause which of the following problems? a) A reduced resistance to corrosion b) a lower tensile strength c) The toughness is reduced d) The hardness will increase

Last Answer : a) A reduced resistance to corrosion

A boy sitting in a rail road car throws a ball straight up into the air. The ball will fall back into his hands when the rail road car is a.moving at constant velocity b.accelerating forward while going around a curve of radius equal to the maximum height attained by the ball c.107 dynes d.accelerating forwardA block A is dropped down a smooth inclined plane, while another identical block B is released for free fall from the same height e.decelerating

Description : A boy sitting in a rail road car throws a ball straight up into the air. The ball will fall back into his hands when the rail road car is a.moving at constant velocity b.accelerating ... inclined plane, while another identical block B is released for free fall from the same height e.decelerating

Last Answer : a. moving at constant velocity

The curve of a catenary by nature is a.hyperbolic b.ellipse c.107 dynes d.circular e.parabolic

Description : The curve of a catenary by nature is a.hyperbolic b.ellipse c.107 dynes d.circular e.parabolic

Last Answer : e. parabolic

When a train is rounding a curve to prevent side thrust on the wheel flanges of cars a.Opposite thrust is created to counter balance this thrust b.Guide rail sections are provided to take care of thrust c.Thrust eliminators are provided in the train d.Outside rails are realised e.Rail section is made thick on curvature

Description : When a train is rounding a curve to prevent side thrust on the wheel flanges of cars a.Opposite thrust is created to counter balance this thrust b.Guide rail sections are provided to take care of ... are provided in the train d.Outside rails are realised e.Rail section is made thick on curvature

Last Answer : d. Outside rails are realised

A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Description : A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Last Answer : b. 50.6 kg-inch

The centre of percussions is a.The point of application of the resultant of all the forces tending to cause a body to rotate about a central axis b.The point of application of the resultant of gravity and buoyancy forces of the body c.The same as centre of gravity d.The metacentre of the body e.The point in a body about which it can rotate horizontally and oscillates under the influence of gravity

Description : The centre of percussions is a.The point of application of the resultant of all the forces tending to cause a body to rotate about a central axis b.The point of application of the resultant ... .The point in a body about which it can rotate horizontally and oscillates under the influence of gravity

Last Answer : a. The point of application of the resultant of all the forces tending to cause a body to rotate about a central axis

In cold working of metal as compared to its hot working (A) Cracks and blow holes are eliminated (B) Ductility and impact strength improves (C) Appreciable strain hardening is produced (D) Yield stress, hardness and fatigue strength is not at all affected

Description : In cold working of metal as compared to its hot working (A) Cracks and blow holes are eliminated (B) Ductility and impact strength improves (C) Appreciable strain hardening is produced (D) Yield stress, hardness and fatigue strength is not at all affected

Last Answer : (C) Appreciable strain hardening is produced

In case of a beam subjected to pure bending a.107 dynes b.the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis c.the stress intensity in any fibre is proportional to the distance of the fibre from the load carrying end d.the stress intensity in any fibre is uniform e.the nature of stress in any fibre is identical

Description : In case of a beam subjected to pure bending a.107 dynes b.the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis c.the stress intensity in any fibre is ... d.the stress intensity in any fibre is uniform e.the nature of stress in any fibre is identical

Last Answer : b. the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis

Shock resisting steels should possess high (A) Hardness (B) Toughness (C) Tensile strength (D) Wear resistance

Description : Shock resisting steels should possess high (A) Hardness (B) Toughness (C) Tensile strength (D) Wear resistance

Last Answer : (B) Toughness

Smith's test of stones is performed to find out (A) The presence of soluble matter of stone (B) The compressive strength of the stone (C) The hardness of the stone (D) The toughness of the stone

Description : Smith's test of stones is performed to find out (A) The presence of soluble matter of stone (B) The compressive strength of the stone (C) The hardness of the stone (D) The toughness of the stone

Last Answer : Answer: Option A

Consider the following salient points in a stress-strain curve of a mild steel bar: 1. Yield point 2. Braking point 3. Yield plateau 4 . Proportionality limit 5. Ultimate point The correct sequence in which they occur while testing the mild steel bar in tension from initial zero strain to failure is (a) 4, 1, 2, 3 and 5 (b) 1, 4, 3, 5 and 2 (c) 4, 1, 3, 5 and 2 (d) 1, 4, 2, 3 and 5

Description : Consider the following salient points in a stress-strain curve of a mild steel bar: 1. Yield point 2. Braking point 3. Yield plateau 4 . Proportionality limit 5. Ultimate point The correct sequence in which they occur while testing the mild ... , 5 and 2 (c) 4, 1, 3, 5 and 2 (d) 1, 4, 2, 3 and 5

Last Answer : (c) 4, 1, 3, 5 and 2

The compression in steel (fS) at failure for Fe - 415 grade steel using stress-strain curve shall be [ A ] 0.87 fy [ B ] 0.75 fy [ C ] 0.45 fy [ D ] 0.55 fy

Description : The compression in steel (fS) at failure for Fe - 415 grade steel using stress-strain curve shall be [ A ] 0.87 fy [ B ] 0.75 fy [ C ] 0.45 fy [ D ] 0.55 fy

Last Answer : [ B ] 0.75 fy

A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts

Description : A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts

Last Answer : e. 60.1 mts

Power required for a train weighing 200 Mg to move at a uniform speed of 60 Kmph up an incline of 1 in 200 is (Resistance due to friction is negligible) a.16.67 KW b.163.5 KW c.1000 KW d.9810 KW e.Tapered bearing

Description : Power required for a train weighing 200 Mg to move at a uniform speed of 60 Kmph up an incline of 1 in 200 is (Resistance due to friction is negligible) a.16.67 KW b.163.5 KW c.1000 KW d.9810 KW e.Tapered bearing

Last Answer : b. 163.5 KW

In which case power required would be more a.In lifting up a weight of 100 kg at a velocity of 3 m/sec but accelerating upwards at 0.5 m/sec b.In lowering a weight of 100 kg along an a inclined plane at an angle of 45? with c.In lifting up a weight of 100 kg at a constant speed of 3 m/sec d.In lowering the weight at a constant speed of 3 m/sec e.In lowering the weight at a velocity of 3 m/sec and acceleration of 1 m/sec2

Description : In which case power required would be more a.In lifting up a weight of 100 kg at a velocity of 3 m/sec but accelerating upwards at 0.5 m/sec b.In lowering a weight of 100 kg along an a inclined plane ... speed of 3 m/sec e.In lowering the weight at a velocity of 3 m/sec and acceleration of 1 m/sec2

Last Answer : a. In lifting up a weight of 100 kg at a velocity of 3 m/sec but accelerating upwards at 0.5 m/sec

The time required to stop a car moving with a velocity 20 m/sec within a distance of 40 m is equal to a.8 sec b.2 sec c.4 sec d.10 sec e.6 sec

Description : The time required to stop a car moving with a velocity 20 m/sec within a distance of 40 m is equal to a.8 sec b.2 sec c.4 sec d.10 sec e.6 sec

Last Answer : c. 4 sec

In a tug of war, five men pull a rope to the left at A and six moen pull the rope at B. A weight of 5 kg is hung vertically from the centre of the rope. In order that the rope AB be horizontal a.the force applied on A must be equal to that on B b.at least one man on side B should be removed c.infinite force will be required to be applied at both ends d.the force required on A must not be equal to that on B e.107 dynes

Description : In a tug of war, five men pull a rope to the left at A and six moen pull the rope at B. A weight of 5 kg is hung vertically from the centre of the rope. In order that the rope AB be horizontal ... to be applied at both ends d.the force required on A must not be equal to that on B e.107 dynes

Last Answer : c. infinite force will be required to be applied at both ends

A machine requires an effort of 10 kg to lift a load of 250 kg and an effort of 13 kg for a load of 400 kg. The effort required to lift a load of 500 kg will be a.25 kg b.107 dynes c.15 kg d.35 kg e.45 kg

Description : A machine requires an effort of 10 kg to lift a load of 250 kg and an effort of 13 kg for a load of 400 kg. The effort required to lift a load of 500 kg will be a.25 kg b.107 dynes c.15 kg d.35 kg e.45 kg

Last Answer : c. 15 kg

Minimum horsepower of pump required for filling 50m3 water tank, 20 metres high from ground in 30 minutes by lifting water from a well 5 metres below the ground level is a.5.45 KW b.7.5 KW c.6.81 KW d.Tapered bearing e.66.8 KW

Description : Minimum horsepower of pump required for filling 50m3 water tank, 20 metres high from ground in 30 minutes by lifting water from a well 5 metres below the ground level is a.5.45 KW b.7.5 KW c.6.81 KW d.Tapered bearing e.66.8 KW

Last Answer : c. 6.81 KW

What is the maximum force, in Newtons, that will not cause tension? a.294 b.316 c.346 d.184 e.107 dynes

Description : What is the maximum force, in Newtons, that will not cause tension? a.294 b.316 c.346 d.184 e.107 dynes

Last Answer : a. 294

The angle of friction is a.The angle which frictional force makes with the normal b.The anle at which the force applied from external souce will cause movement c.The angle at which fictional force is inclined to external force d.The angle between the normal reaction and the resultant of normal reaction and the limiting friction e.None of the above

Description : The angle of friction is a.The angle which frictional force makes with the normal b.The anle at which the force applied from external souce will cause movement c.The angle at which fictional ... the normal reaction and the resultant of normal reaction and the limiting friction e.None of the above

Last Answer : d. The angle between the normal reaction and the resultant of normal reaction and the limiting friction

The earth's gravitational force field is said to be conservative force field because a.The work acted by the earth's gravitational field on a particle is independent on the path traced out by the particle b.The work acted by the erth's gravitational field will cause same path for all particles irrespective of their mass c.The direction of gravitational force is fixed d.The gravitational field has only single directional component always acting normal to a body e.The value of gravitational force rise is fixed

Description : The earth's gravitational force field is said to be conservative force field because a.The work acted by the earth's gravitational field on a particle is independent on the path traced out by ... directional component always acting normal to a body e.The value of gravitational force rise is fixed

Last Answer : a. The work acted by the earth's gravitational field on a particle is independent on the path traced out by the particle

A ductile material may not meet a failure if it has been tested for the theories of failure (a) Firstly Maximum Shear Stress Theory (b) Secondly Maximum Shear Strain Energy Theory (c) Both (a) & (b) (d) None

Description : A ductile material may not meet a failure if it has been tested for the theories of failure (a) Firstly Maximum Shear Stress Theory (b) Secondly Maximum Shear Strain Energy Theory (c) Both (a) & (b) (d) None

Last Answer : (c) Both (a) & (b)

Which of the following theories of failure is most appropriate for a brittle material? (a) Maximum principal strain theory (b) Maximum principal stress theory (c) Maximum shear stress theory (d) Maximum strain energy theory

Description : Which of the following theories of failure is most appropriate for a brittle material? (a) Maximum principal strain theory (b) Maximum principal stress theory (c) Maximum shear stress theory (d) Maximum strain energy theory

Last Answer : (b) Maximum principal stress theory

Consider the following statements: 1. For a saturated soil, Skempton’s B-parameter is nearly equal to unity. 2. For an undisturbed sensitive clay, the stress-strain curve shows a peak. 3. Interlocking contributes significantly to the shearing strength in case of dense sand. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. For a saturated soil, Skempton's B-parameter is nearly equal to unity. 2. For an undisturbed sensitive clay, the stress-strain curve shows a peak. 3. Interlocking contributes significantly to the shearing ... 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (a) 1, 2 & 3

Select the incorrect statement from the following In eccentrically loaded columns, [ A ] The tensile strength of concrete is ignored [ B ] Design stress – strain curve for steel in compression is the same as in tension [ C ] The strain at different points in the section will be same [ D ] Plane section remain plane even after bending

Description : Select the incorrect statement from the following In eccentrically loaded columns, [ A ] The tensile strength of concrete is ignored [ B ] Design stress - strain curve for steel in compression is the ... different points in the section will be same [ D ] Plane section remain plane even after bending

Last Answer : [ C ] The strain at different points in the section will be same

Grindability of a material does not depend upon its (A) Elasticity (B) Hardness (C) Toughness (D) Size

Description : Grindability of a material does not depend upon its (A) Elasticity (B) Hardness (C) Toughness (D) Size

Last Answer : (D) Size

The ability of a material to offer resistance to scratching or indentation is a measure of its (A) Brittleness (B) Toughness (C) Hardness (D) Resilience

Description : The ability of a material to offer resistance to scratching or indentation is a measure of its (A) Brittleness (B) Toughness (C) Hardness (D) Resilience

Last Answer : (C) Hardness

_______ property of a material is determined by the Herbert Pendulum device. (A) Hardness (B) Tensile (C) Toughness (D) Compressive

Description : _______ property of a material is determined by the Herbert Pendulum device. (A) Hardness (B) Tensile (C) Toughness (D) Compressive

Last Answer : (A) Hardness

Pick out the correct statement. (A) Hot worked materials are subjected to annealing to remove internal stresses (B) Annealing of steel hardens it slightly (C) Normalising of a material induces stresses (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness

Description : Pick out the correct statement. (A) Hot worked materials are subjected to annealing to remove internal stresses (B) Annealing of steel hardens it slightly (C) Normalising of a material induces stresses (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness

Last Answer : (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness Share

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Proportional to the coefficient of static friction b.Proportional to the coefficient of dynamic friction c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Last Answer : c. Indeterminate

The shape of a suspended cable under its own weight is a.Catenary b.Elliptical c.Cycloidal d.Semi-circle e.Parabolic

Description : The shape of a suspended cable under its own weight is a.Catenary b.Elliptical c.Cycloidal d.Semi-circle e.Parabolic

Last Answer : a. Catenary

A particle is of wieght 8 kg. When it is allowed to fall under the force of gravity its momentum at the time t = 2 sec would be a.8 kg sec b.32 kg sec c.2 kg sec d.16 kg sec e.48 kg sec

Description : A particle is of wieght 8 kg. When it is allowed to fall under the force of gravity its momentum at the time t = 2 sec would be a.8 kg sec b.32 kg sec c.2 kg sec d.16 kg sec e.48 kg sec

Last Answer : d. 16 kg sec

A rigid body is suspended vertically at a point and oscillates with a small amplitude under the action of the force of gravity. Such an arrangement is called a.Simple pendulum b.Rigid pendulum c.Second's pendulum d.Compound pendulum e.Newton's pendulum

Description : A rigid body is suspended vertically at a point and oscillates with a small amplitude under the action of the force of gravity. Such an arrangement is called a.Simple pendulum b.Rigid pendulum c.Second's pendulum d.Compound pendulum e.Newton's pendulum

Last Answer : d. Compound pendulum

Under which circumstances will have zero velocity and be still accelerating? a.The bob of a simple pendulum when at its mean position b.107 dynes c.A steamer while taking a turn d.A ball at its highest point of its rise when thrown up e.Tyres of a stationary automobile

Description : Under which circumstances will have zero velocity and be still accelerating? a.The bob of a simple pendulum when at its mean position b.107 dynes c.A steamer while taking a turn d.A ball at its highest point of its rise when thrown up e.Tyres of a stationary automobile

Last Answer : d. A ball at its highest point of its rise when thrown up

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Indeterminate b.Proportional to the coefficient of dynamic friction c.Determinate but depends on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Last Answer : c. Determinate but depends on the acceleration of the cylinder

Our weight will be zero under all of the following conditions EXCEPT a.107 dynes b.We are at the centre of the earth c.When we are ascending in a lift with acceleration of 4.9 m/s2 d.We are orbiting in a satellite e.When we are freely faling

Description : Our weight will be zero under all of the following conditions EXCEPT a.107 dynes b.We are at the centre of the earth c.When we are ascending in a lift with acceleration of 4.9 m/s2 d.We are orbiting in a satellite e.When we are freely faling

Last Answer : c. When we are ascending in a lift with acceleration of 4.9 m/s2

The displacement of a particle under going rectilinear motion along the x-axis is given by x = 2t3 + 21t2 + 60t + 6 metres. a.27 m/s2 b.18 m/s2 c.36 m/s2 d.9 m/s2 e.107 dynes

Description : The displacement of a particle under going rectilinear motion along the x-axis is given by x = 2t3 + 21t2 + 60t + 6 metres. a.27 m/s2 b.18 m/s2 c.36 m/s2 d.9 m/s2 e.107 dynes

Last Answer : d. 9 m/s2

A rigid body is in equilibrium under the action of these forces when a.These forces are equal b.The lines of action of these forces are parallel c.The lines of action of these forces meet in a point d.(A) and (B) above e.(B) and (C) above

Description : A rigid body is in equilibrium under the action of these forces when a.These forces are equal b.The lines of action of these forces are parallel c.The lines of action of these forces meet in a point d.(A) and (B) above e.(B) and (C) above

Last Answer : e. (B) and (C) above

The limiting force of fiction is a.The friction force acting on a body when it is in motion b.The value of friction force which stops the movement of the body c.The value of friction force which cannot exceed under a situation d.The friction force acting when the body is just about to move e.Double of the normal friction

Description : The limiting force of fiction is a.The friction force acting on a body when it is in motion b.The value of friction force which stops the movement of the body c.The value of friction force which ... d.The friction force acting when the body is just about to move e.Double of the normal friction

Last Answer : d. The friction force acting when the body is just about to move

Polar moment of inertia is a.Applicable to masses whereas moment of inertia is applicable to area only b.The moment of inertia for an area ralative to a line or axis which is out the plane of area c.Same as moment of inertia d.The moment of inertia for an area relative to a line or axis parallel to the centroidal axis e.The moment of inertia for an area relative to a line or axis perpendicular to the plane of the area

Description : Polar moment of inertia is a.Applicable to masses whereas moment of inertia is applicable to area only b.The moment of inertia for an area ralative to a line or axis which is out the plane of area ... The moment of inertia for an area relative to a line or axis perpendicular to the plane of the area

Last Answer : e. The moment of inertia for an area relative to a line or axis perpendicular to the plane of the area

The centroid of the area between the circle x2 + y2 = 16 and the line x + y = 4 will have the coordinates a.(4, 2) b.(2, 4) c.(2.34, 2.34) d.(1.16, 1.16) e.None of the above

Description : The centroid of the area between the circle x2 + y2 = 16 and the line x + y = 4 will have the coordinates a.(4, 2) b.(2, 4) c.(2.34, 2.34) d.(1.16, 1.16) e.None of the above

Last Answer : c. (2.34, 2.34)

The x coordinate of the centroid of the area enclosed by the parabolas y = x2 and x = y2 will be a.107 dynes b.0.44 c.0.43 d.0.45 e.0.46

Description : The x coordinate of the centroid of the area enclosed by the parabolas y = x2 and x = y2 will be a.107 dynes b.0.44 c.0.43 d.0.45 e.0.46

Last Answer : d. 0.45

Given that the area of a figure varies as square of mean ordinate. The area of the figure is 154 sq. cm when the mean ordinate is 7 cm. The area of the figure when mean ordinate is 10.5 cm will be a.364.9 cm b.364.5 cm c.360.6 cm d.346.5 cm e.356.3 cm

Description : Given that the area of a figure varies as square of mean ordinate. The area of the figure is 154 sq. cm when the mean ordinate is 7 cm. The area of the figure when mean ordinate is 10.5 cm will be a.364.9 cm b.364.5 cm c.360.6 cm d.346.5 cm e.356.3 cm

Last Answer : d. 346.5 cm

A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the force exerted by the jet on the plate would be in the range a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Description : A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the ... a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Last Answer : a. 15 - 20 kg

The y-coordinate of the centroid of the area bounded by the x-axis, the line x = 3 and the parabola y = x2 will be a.2.7 b.2.55 c.107 dynes d.2.6 e.2.65

Description : The y-coordinate of the centroid of the area bounded by the x-axis, the line x = 3 and the parabola y = x2 will be a.2.7 b.2.55 c.107 dynes d.2.6 e.2.65

Last Answer : a. 2.7

Which of the following is scalar quantity a.Area of triangle b.Displacement of a particle c.Acceleration of car d.Force of friction e.Velocity a gear

Description : Which of the following is scalar quantity a.Area of triangle b.Displacement of a particle c.Acceleration of car d.Force of friction e.Velocity a gear

Last Answer : a. Area of triangle