Description : A point moves in such a manner that its distance from a fixed point is equal to its distance from a fixed line multiplied by a constant greater than one. The locus of the path traced by the point will be a a.Cycloid b.Hyperbola c.Circle d.Involute e.Ellipsc
Last Answer : d. Involute
Description : The locus of instantaneous centre of a moving rigid body a.Epicycloid b.Straight line c.Involute d.Cycloid e.Centrode
Last Answer : e. Centrode
Description : If air resistance is neglected, at the mid-point of its swing, the acceleration of the bob of a simple pendulum along its path is always a.Increasing b.Zero c.A cycloid d.Decreasing e.A minimum but not equal to zero
Last Answer : d. Decreasing
Description : What is difference between Archimedian spiral and involute of a circle?
Last Answer : answer:From Wolfram MathWorld article on Circle Involute Pedal Curve: The pedal curve of circle involute f = cos t + t sin t g = sin t - t cos t with the center as the pedal point is the ... . The two curves are compared in this image from Wikipedia (black = circle involute; red = A. spiral).
Description : A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch
Last Answer : b. 50.6 kg-inch
Description : A particle starts from rest and moves in a straight line whose equation of motion is given by S = 2t3 - t2 - 1. The acceleration of the particle after one sec will be a.6 m/sec2 b.4 m/sec2 c.12 m/sec2 d.10 m/sec2 e.8 m/sec2
Last Answer : d. 10 m/sec2
Description : The centroid of the area between the circle x2 + y2 = 16 and the line x + y = 4 will have the coordinates a.(4, 2) b.(2, 4) c.(2.34, 2.34) d.(1.16, 1.16) e.None of the above
Last Answer : c. (2.34, 2.34)
Description : The locus of the end point of the resultant of the normal and tangential components of the stress on an inclined plane, is (A) Circle (B) Parabola (C) Ellipse (D) Straight line
Last Answer : (C) Ellipse
Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above
Last Answer : c. Indeterminate
Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction
Last Answer : c. Determinate but depends on the acceleration of the cylinder
Description : A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered ... with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg
Last Answer : c. 10900 kg
Description : A projectile is shot straight up with vo = 40 m/s. After how many seconds will it return if drag is neglected? a.6 b.107 dynes c.4 d.10 e.8
Last Answer : e. 8
Description : Secondary stresses may be set up in frame due to any of the following reasons EXCEPT a.members not being straight b.self-weight of the members c.eccentricity of connections d.rigidity of the members e.107 dynes
Last Answer : d. rigidity of the members
Description : A boy sitting in a rail road car throws a ball straight up into the air. The ball will fall back into his hands when the rail road car is a.moving at constant velocity b.accelerating ... inclined plane, while another identical block B is released for free fall from the same height e.decelerating
Last Answer : a. moving at constant velocity
Description : Instantaneous centre for a rolling wheel on a straight track will be at a.107 dynes b.A c.B d.C e.D
Last Answer : e. D
Description : A stone weighing 20 N is whirling in a vertical circle at the extremity of a string 100 cm long. The tension in the string will be zero a.at the highest position b.at the lowest position c.at the midway position d.at none of the above e.107 dynes
Last Answer : a. at the highest position
Description : Centroid of the are of circle shown in adjacement figure is a.r sin (?/2)/2 ?, 0 b.r sin (?)/?, 0 c.2 r sin (?/2)/?, 0 d.107 dynes e.2r sin (?)/?, 0
Last Answer : c. 2 r sin (?/2)/?, 0
Description : The shape of a suspended cable under its own weight is a.Catenary b.Elliptical c.Cycloidal d.Semi-circle e.Parabolic
Last Answer : a. Catenary
Description : The centre of gravity of a plane lamina will not be at its geometrical centre if it is a a.Square b.Equilateral triangle c.Circle d.Rectangle e.Right angled triangle
Last Answer : e. Right angled triangle
Description : The moment of inertia of a semi-circle of radius r with respect to a centroidal axis parallel to the diameter is a.0.33 r2 b.0.11 r2 c.0.055 r2 d.0.05 r2 e.0.22 r2
Last Answer : b. 0.11 r2
Description : The satellite moves in a circle around the earth. The radius of this circle is equal to one-half the radius of the moons orbit. The satellite will complete one revolution in a.1 lunar month b.2-3/4 lunar month c.2-2/3 lunar month d.None of the above e.
Last Answer : e. None of the above
Description : The locus of reaction of a two hinged semi-circular arch, is (A) Straight line (B) Parabola (C) Circle (D) Hyperbola
Last Answer : (A) Straight line
Description : The locus of the moment of inertia about inclined axes to the principal axis, is (A) Straight line (B) Parabola (C) Circle (D) Ellipse
Last Answer : (D) Ellipse
Description : Pick up the correct statement from the following regarding radial flow centrifugal pumps: (A) These are provided with volute type or turbine type casings (B) In involute type of radial flow ... centrifugal pump, is always higher than that of volute type (D) All the above
Last Answer : (D) All the above
Description : According to principle of transmissiblity of forces, when a force acts upon a body, its effect is a.maximum when it acts at C.G. of the body b.minimum when it acts at C.G. of the body c.different at different points of the body d.107 dynes e.same at every point in its line of action
Last Answer : e. same at every point in its line of action
Description : According to the principle of transmissibility of forces, when a force acts upon a body ; its effect is a.Minimum when it acts at C.G. of the body b.Maximum when it acts at C.G. of the body c.Different at different points of body d.Same at every point in its line of action e.None of the above
Last Answer : d. Same at every point in its line of action
Description : At a roller support the line of reaction and the roller base must be at an angle of a.60? b.90? c.not less than 60? d.not more than 60? e.107 dynes
Last Answer : b. 90?
Description : Polar moment of inertia is a.Applicable to masses whereas moment of inertia is applicable to area only b.The moment of inertia for an area ralative to a line or axis which is out the plane of area ... The moment of inertia for an area relative to a line or axis perpendicular to the plane of the area
Last Answer : e. The moment of inertia for an area relative to a line or axis perpendicular to the plane of the area
Description : A sphere of radius r is cut from larger sphere of radius R. The distance between their centre is a. The centroid of the remaining valoume lies on the line of centres and the sistanc from the centre of the larger sphere is a.ar2 / (R2 - r2) b.107 dynes c.aR/(R2-r2) d.aR/(R - r) e.ar3 / (R3 - r3)
Last Answer : e. ar3 / (R3 - r3)
Description : The y-coordinate of the centroid of the area bounded by the x-axis, the line x = 3 and the parabola y = x2 will be a.2.7 b.2.55 c.107 dynes d.2.6 e.2.65
Last Answer : a. 2.7
Description : The resultant of coplaner parallel forces is found by load line diagram, while the position is found by a.link polygen b.funicular polygon c.string polygon d.any of the above e.107 dynes
Last Answer : d. any of the above
Description : The necessary condition for the forces acting on a body to be in equilibrium is that these should be a.In the same direction b.Coplaner c.Similar in nature d.Should not meet at a point e.(B) and (D) above
Last Answer : e. (B) and (D) above
Description : The statement --- if forces acting on a point can be represented in magnitude and direction by the sides of a polygon taken in order then their resultant will be represented in magnitude and direction by the closing ... 's law of forces c.Law of polygon of forces d.D'Alembert's rule e.Lami's theorem
Last Answer : c. Law of polygon of forces
Description : The statement ---- if three forces acting at a point are in equilibrium, each force is proportional to the sine of the angle between the other two ---- is known as a.Law of polygon of forces b.D'Alembert's principle c.Newtons law of forces d.Lami's theorem e.Law of triangle of forces
Last Answer : d. Lami's theorem
Description : A flywheel 200 cm in diameter is rotating at 100 rpm. A point on the rim of the flywheel will not have a.angular velocity b.centripental acceleration c.tangential acceleration d.all of the above e.107 dynes
Last Answer : c. tangential acceleration
Description : A mass of 5 kg moves on a smooth horizontal plane with a speed of 8 m/s attached to a fixed point on the plane by a string of length 4m. Tension in the string is a.785 b.80N c.392.4N d.None of the above e.Tapered bearing
Last Answer : b. 80N
Description : The angle which an inclined surface makes with the horizontal when a body placed on it is on the point moving down is known as a.Angle of friction b.Angle of limiting friction c.Angle of inclination d.Angle of repose e.None of the above
Last Answer : d. Angle of repose
Description : The ideal angle of banking provided on roads a.Depends on (velocity)2 of vehicle b.Depends on the nature of road surface c.Depend on coefficient of friction between the road and the vehicle cantact point d.Depends on weight of the vehicle e.All above
Last Answer : a. Depends on (velocity)2 of vehicle
Description : When two forces acting at a point are such that if the direction of one is reversed, the direction of the resultant is turned through a right angle, the forces must be a.inclined at more than 90? b.inclined at less than 90? c.equal in magnitude d.acting at 180? e.107 dynes
Last Answer : c. equal in magnitude
Description : The moment of a force a.Occurs about a point b.Measures the capacity to do useful work c.Occurs only when bodies are in motion d.Measures the ability to produce turning or twisting about an axes e.None of the above
Last Answer : d. Measures the ability to produce turning or twisting about an axes
Description : A body in Simple Harmonic Motion will attain maximum velocity when it passes through a.Point of 0.75 amplitude b.Extreme point of the oscillation of L.H.S. c.Point of half amplitude d.Extreme point of the oscillation at R.H.S. e.Mean position
Last Answer : e. Mean position
Description : A rigid body is suspended vertically at a point and oscillates with a small amplitude under the action of the force of gravity. Such an arrangement is called a.Simple pendulum b.Rigid pendulum c.Second's pendulum d.Compound pendulum e.Newton's pendulum
Last Answer : d. Compound pendulum
Description : A number of forces acting at a point will be in equilibrium if a.Sum of the forces is zero b.Algebraic sum of the forces is zero c.Sum of the resolved parts in any two perpendicular directions are both zero d.None of the above e.The metacentre of the body
Last Answer : d. None of the above
Description : Under which circumstances will have zero velocity and be still accelerating? a.The bob of a simple pendulum when at its mean position b.107 dynes c.A steamer while taking a turn d.A ball at its highest point of its rise when thrown up e.Tyres of a stationary automobile
Last Answer : d. A ball at its highest point of its rise when thrown up
Description : A body of weight 100 kg is placed on a horizontal plane. A horizontal force of 30 kg is applied and the block is just on the point of motion. The angle of friction is a.About 16? b.30? c.45? d.60? e.None of the above
Last Answer : a. About 16?
Description : A force F = 2i + 3j - k is passing through the origin. Its moment about point (1, 1, 0) is a.Zero b.2i + 3j c.i - j - k d.i + j e.i + j + k
Last Answer : c. i - j - k
Description : When all the forces acting on a body lie in one plane and their lines of action meet at one point, the forces a.constitute a moment b.constitute a couple c.are known as coplaner-concurrent forces. d.are known as non-coplaner forces e.107 dynes
Last Answer : c. are known as coplaner-concurrent forces.
Description : The forces which meet at one point but their lines of action do not lie in one plane, are called a.Coplanar noncurrent forces b.Non-coplanar nonconcurrent forces c.Intersecting forces d.Coplanar concurrent forces e.
Last Answer : c. Non-coplanar nonconcurrent forces
Description : A body is executing simple harmonic motion of amplitude 1 cm. Its velocitywhile passing through the central point is 10 mm/sec. Its frequency will be a.2.99 rps b.2.22 rps c.1 rps d.1.59 rps e.1.77 rps
Last Answer : c. 1 rps
Description : A block slides down a smooth inclined plane when released from the top while another falls freely from the same point. The value of which parameter in the two cases will be identical? a.Time ... ground c.Momentum at the ground d.Velocity while touching the ground e.Kinetic energy after one second
Last Answer : d. Velocity while touching the ground