The locus of the moment of inertia about inclined axes to the principal axis, is 

(A) Straight line 

(B) Parabola 

(C) Circle 

(D) Ellipse

1 Answer

Answer :

(D) Ellipse

Related questions

Description : The locus of the end point of the resultant of the normal and tangential components of the stress  on an inclined plane, is  (A) Circle  (B) Parabola  (C) Ellipse  (D) Straight line 

Last Answer : (C) Ellipse 

Description : Which of the following is the locus of a point that moves in such a manner that its distance from a  fixed point is equal to its distance from a fixed line multiplied by a constant greater than one  (A) Ellipse  (B) Hyperbola  (C) Parabola  (D) Circle 

Last Answer : (B) Hyperbola 

Description : If there is no impervious boundary at the bottom of a hydraulic structure, stream lines tend to follow: (A) A straight line (B) A parabola (C) A semi-ellipse (D) A semi-circle

Last Answer : (C) A semi-ellipse

Description : The locus of reaction of a two hinged semi-circular arch, is  (A) Straight line  (B) Parabola  (C) Circle  (D) Hyperbola 

Last Answer : (A) Straight line 

Description : For any part of a beam subjected to uniformly distributed load, bending moment diagram is (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Last Answer : d) Parabola

Description : For any part of a beam between two concentrated load, Bending moment diagram is a (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Last Answer : (c) Line inclined to x-axis

Description : For any part of a beam subjected to uniformly distributed load, Shear force diagram is (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Last Answer : (c) Line inclined to x-axis

Description : 7-For any part of the beam, between two concentrated load Shear force diagram is a (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Last Answer : Na

Description : In case of principal axes of a section  (A) Sum of moment of inertia is zero  (B) Difference of moment inertia is zero  (C) Product of moment of inertia is zero  (D) None of these 

Last Answer : (C) Product of moment of inertia is zero 

Description : The normal at a point `P` on the ellipse `x^2+4y^2=16` meets the x-axis at `Qdot` If `M` is the midpoint of the line segment `P Q ,` then the locus of

Last Answer : The normal at a point `P` on the ellipse `x^2+4y^2=16` meets the x-axis at `Qdot` If `M` is ... (pm2sqrt3,pmsqrt1/7)` D. `(pm2sqrt3,pm(4sqrt(3))/4)`

Description : A hot liquid is kept in a big room. The logarithm of the numerical valueof the temperature difference between the liquid and the room is plotted against time. The plot will be very nearly a/an (A) Ellipse (B) Straight line (C) Parabola (D) Circular arc

Last Answer : (B) Straight line

Description : The graphical representation of Ohms law is a. hyperbola b. Ellipse c. parabola d. straight line

Last Answer : d. straight line

Description : Which of the following relations is used to represent theorem of perpendicular axes? (H = Vertical axis, I = Moment of inertia and K = Radius of gyration) a. IPQ = Ixx + AH2 b. IPQ = Ixx + Ak2 c. Izz = Ixx + Iyy d. Izz + Ixx + Iyy = 0

Last Answer : c. Izz = Ixx + Iyy

Description : Which of the following laminas have same moment of inertia (Ixx = Iyy), when passed through the centroid along x-x and y-y axes? a. Circle b. Semi-circle c. Right angle triangle d. Isosceles triangle

Last Answer : a. Circle

Description : Moment of inertia acting on a semi-circle about symmetrical axes is given as _______ a. 1.57 r4 b. 0.055 r4 c. 0.392 r4 d. 0.11 r4

Last Answer : c. 0.392 r4

Description : Assuming constant gravity and no air resistance, the path of a cannonball fired from a cannon is: w) a semi-circle x) an ellipse y) a parabola z) a hyperbola

Last Answer : ANSWER: Y -- A PARABOLA 

Description : A parabola is drawn through two given points `A(1,0)` and `B(-1,0)` such that its directrix always touches the circle `x² + y^2 = 4.` Then, The locus

Last Answer : A parabola is drawn through two given points `A(1,0)` and `B(-1,0)` such that its directrix always touches the circle ... `(x^(2))/(5)+(y^(2))/(4)=1`

Description : The bending moment diagram for a cantilever with U.D.L. over the whole span will be (a) Triangle (b) Rectangle (c) Parabola (d) Ellipse

Last Answer : (c) Parabola

Description : If Ix  and Iy are the moments of inertia of a section about X and Y axes, the polar moment of inertia  of the section, is  (A) (IX + IY)/2  (B) (IX - IY)/2  (C) IX + IY (D) (IX/IY)

Last Answer : (C) IX + I

Description : Pick up the correct statement from the following: (A) A refracting telescope consists optically of two lenses (B) The principal axes of both the lenses coincide the optical axis of the telescope (C) The lens nearer the object to be viewed is convex and is called objective (D) All the above

Last Answer : (D) All the above

Description : The locus of a point on a thread unwound from a cylinder will be a.A circle b.A cycloid c.A straight line d.A spiral e.An involute

Last Answer : b. A cycloid

Description : Which one of the following does not belong to the family of conics? a.Parabola b.Ellipse c.Hyperbola d.Line

Last Answer : d.Line

Description : Worm gear are used for transmitting power between two Shaft Inclined at e. At right angle to each other and axes can intersect f. At right angle to each other but axis cannot intersect each other g. At right angle to each other and in different planes h. None of the above

Last Answer : f. At right angle to each other but axis cannot intersect each other

Description : A man in a train moving with a constant velocity drops a ball on the platform. The path of the ban as seen by an observer standing on the platform is – (1) A straight line (2) A circle (3) A parabola (4) None of these

Last Answer : (3) A parabola Explanation: In the reference frame of the platform the ball has initial horizontal velocity equal to the velocity of the train. The vertical direction is the same observed on the train because both observers agree that gravity is acting on the ball causing an acceleration g.

Description : A boy sitting in a train moving with a uniform velocity drops a coin outside. A man standing outside the train will find the trajectory of the coin to be - (1) a parabola (2) a horizontal straight line (3) a vertical straight line (4) a circle

Last Answer : (1) a parabola Explanation: Parabola, because when the coin is dropped at a particular point, it has the same velocity as the running train. So, by Newton's first law, it continues its motion horizontally with that velocity.

Description : A man in a train moving with a constant velocity drops a ball on the platform. The path of the ball as seen by an observer standing on the platform is (1) A straight line (2) A circle (3) A parabola (4) None of these

Last Answer : A parabola

Description : The moment of inertia of a semi-circle of radius r with respect to a centroidal axis parallel to the diameter is a.0.33 r2 b.0.11 r2 c.0.055 r2 d.0.05 r2 e.0.22 r2

Last Answer : b. 0.11 r2

Description : Define ‘Moment of inertia’ and write mathematical expression of square and quarter circle with both axis.

Last Answer : Moment of inertia of a body about any axis is equal to the product of the area of the body and square of the distance of its centroid from that axis.  OR  Moment of inertia of a body about any axis is defined as the sum of second moment of all elementary areas about that axis.

Description : If compressive yield stress and tensile yield stress are equivalent, then region of safety from maximum principal stress theory is of which shape? a) Rectangle b) Square c) Circle d) Ellipse

Last Answer : b) Square

Description : What is the moment of inertia acting on a semicircle of radius 20 mm about the asymmetrical axes? a. 125.663 x 103 mm4 b. 17600 mm4 c. 1500 mm4 d. 8800 mm4

Last Answer : b. 17600 mm4

Description : What is the moment of inertia acting on a rectangle of width 15 mm and depth 40 mm about base by using theorem of parallel axes? a. 320 x 103 mm4 b. 300 x 103 mm4 c. 240 x 103 mm4 d. 80 x 103 mm

Last Answer : a. 320 x 103 mm4

Description : A object moves with uniform positive acceleration. Its velocity-time graph will be (a) A straight line parallel to the time axis (b) A straight line inclined at an obtuse angle to the time axis (c) A straight line inclined at an acute angle to the time axis (d) None of these. -Science

Last Answer : Answer is (c)

Description : The Lissajous pattern observed on screen of CRO is a straight line inclined at 45° to x axis. If X–plate input is 2 sin ωt, the Y–plate input is (1) 2 sin ωt (2) 2 sin (ωt + 45°) (3) 2 sin (ωt – 45°) (4) 22 sin ωt + 45°) 

Last Answer : The Lissajous pattern observed on screen of CRO is a straight line inclined at 45° to x axis. If X–plate input is 2 sin ωt, the Y–plate input is 2 sin ωt 

Description : The locus of the middle points of the focal chords of the parabola, `y^2=4x` is:

Last Answer : The locus of the middle points of the focal chords of the parabola, `y^2=4x` is: A. `y^2=x-1` B. `y^2=2(x-1)` C. `y^2=2(1-x)` D. None

Description : An ellipse can also be rotated about its center coordinates by rotating a.End points b.Major and minor axes c.Only a d.None

Last Answer : b.Major and minor axes

Description : The ellipse `x^2+""4y^2=""4` is inscribed in a rectangle aligned with the coordinate axes, which in turn is inscribed in another ellipse that passes t

Last Answer : The ellipse `x^2+""4y^2=""4` is inscribed in a rectangle aligned with the coordinate axes, which in turn is ... 4x^2+48y^2=48` D. `4x^2+64y^2=48`

Description : In a cantilever carrying a uniformly varying load starting from zero at the free end, the Bending moment diagram is (a) A horizontal line parallel to x-axis (b) A line inclined to x-axis (c) Follows a parabolic law (d) Follows a cubic law

Last Answer : (d) Follows a cubic law

Description : A cable with a uniformly distributed load per horizontal metre run will take the following shape (A) Straight line (B) Parabola (C) Hyperbola (D) Elliptical

Last Answer : (B) Parabola

Description : Camber in pavements is provided by (A) Straight line method (B) Parabola method (C) Straight at the edges and parabolic at the crown (D) All the above

Last Answer : Answer: Option D

Description : The stress-strain curve concrete in compression follows [ A ] a straight line [ B ] a rectangular parabolic curve [ C ] a semi circular arc [ D ] a cubic parabola

Last Answer : [ B ] a rectangular parabolic curve

Description : The stress-strain curve concrete in compression follows [ A ] a straight line [ B ] a rectangular parabolic curve [ C ] a semi circular arc [ D ] a cubic parabola

Last Answer : [ B ] a rectangular parabolic curve

Description : The moment of inertia of a rectangular section of width and depth about an axis passing  through C.G. and parallel to its width is  (A) BD²/6  (B) BD3 /6  (C) BD3 /12  (D) B²D/6 

Last Answer : (C) BD3 /12 

Description : If M, I, R, E, F, and Y are the bending moment, moment of inertia, radius of curvature, modulus of  elasticity stress and the depth of the neutral axis at section, then  (A) M/I = R/E = F/Y (B) I/M = R/E = F/Y (C) M/I = E/R = E/Y (D) M/I = E/R = Y/F

Last Answer : (C) M/I = E/R = E/Y

Description : At any point of a beam, the section modulus may be obtained by dividing the moment of inertia of  the section by  (A) Depth of the section  (B) Depth of the neutral axis  (C) Maximum tensile stress at the section  (D) Maximum compressive stress at the section

Last Answer : (B) Depth of the neutral axis 

Description : Pick up the correct statement from the following:  (A) The moment of inertia is calculated about the axis about which bending takes place  (B) If tensile stress is less than axial ... tensile stress is equal to axial stress, the section experiences compressive stress  (D) All the above 

Last Answer : (D) All the above 

Description : In a shaft shear stress intensity at a point is not (A) Directly proportional to the distance from the axis (B) Inversely proportional to the distance from the axis (C) Inversely proportional to the polar moment of inertia (D) Directly proportional to the applied torque

Last Answer : (B) Inversely proportional to the distance from the axis

Description : If is the shear force at a section of an I-joist, having web depth and moment of inertia about its neutral axis, the difference between the maximum and mean shear stresses in the web is, (A) Sd²/8I (B) Sd²/12I (C) Sd²/16I (D) Sd²/24I

Last Answer : (D) Sd²/24I

Description : The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where IG = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface, ... (IG/ ) - (B) (IG/ ) - (C) ( /IG) + (D) (IG/ ) +

Last Answer : Answer: Option D

Description : Polar moment of inertia is a.Applicable to masses whereas moment of inertia is applicable to area only b.The moment of inertia for an area ralative to a line or axis which is out the plane of area ... The moment of inertia for an area relative to a line or axis perpendicular to the plane of the area

Last Answer : e. The moment of inertia for an area relative to a line or axis perpendicular to the plane of the area

Description : If a length of a line segment is 6 and another line segment is 8 how long is the major axis of the ellipse?

Last Answer : The answer will depend on what, if anything, the line segmentshave to do with the ellipse.