The locus of the end point of the resultant of the normal and tangential components of the stress 

on an inclined plane, is 

(A) Circle 

(B) Parabola 

(C) Ellipse 

(D) Straight line 

1 Answer

Answer :

(C) Ellipse 

Related questions

Description : The locus of the moment of inertia about inclined axes to the principal axis, is  (A) Straight line  (B) Parabola  (C) Circle  (D) Ellipse

Last Answer : (D) Ellipse

Description : Which of the following is the locus of a point that moves in such a manner that its distance from a  fixed point is equal to its distance from a fixed line multiplied by a constant greater than one  (A) Ellipse  (B) Hyperbola  (C) Parabola  (D) Circle 

Last Answer : (B) Hyperbola 

Description : If there is no impervious boundary at the bottom of a hydraulic structure, stream lines tend to follow: (A) A straight line (B) A parabola (C) A semi-ellipse (D) A semi-circle

Last Answer : (C) A semi-ellipse

Description : The locus of reaction of a two hinged semi-circular arch, is  (A) Straight line  (B) Parabola  (C) Circle  (D) Hyperbola 

Last Answer : (A) Straight line 

Description : The normal at a point `P` on the ellipse `x^2+4y^2=16` meets the x-axis at `Qdot` If `M` is the midpoint of the line segment `P Q ,` then the locus of

Last Answer : The normal at a point `P` on the ellipse `x^2+4y^2=16` meets the x-axis at `Qdot` If `M` is ... (pm2sqrt3,pmsqrt1/7)` D. `(pm2sqrt3,pm(4sqrt(3))/4)`

Description : A hot liquid is kept in a big room. The logarithm of the numerical valueof the temperature difference between the liquid and the room is plotted against time. The plot will be very nearly a/an (A) Ellipse (B) Straight line (C) Parabola (D) Circular arc

Last Answer : (B) Straight line

Description : The graphical representation of Ohms law is a. hyperbola b. Ellipse c. parabola d. straight line

Last Answer : d. straight line

Description : Ellipse of stress is used to find a. Resultant stress on any plane in a bi-axial stress system b. Resultant stress on any plane in a general two dimensional system c. Maximum shear stress d. Location of planes of maximum shear stress

Last Answer : a. Resultant stress on any plane in a bi-axial stress system

Description : Assuming constant gravity and no air resistance, the path of a cannonball fired from a cannon is: w) a semi-circle x) an ellipse y) a parabola z) a hyperbola

Last Answer : ANSWER: Y -- A PARABOLA 

Description : A parabola is drawn through two given points `A(1,0)` and `B(-1,0)` such that its directrix always touches the circle `x² + y^2 = 4.` Then, The locus

Last Answer : A parabola is drawn through two given points `A(1,0)` and `B(-1,0)` such that its directrix always touches the circle ... `(x^(2))/(5)+(y^(2))/(4)=1`

Description : For any part of a beam subjected to uniformly distributed load, bending moment diagram is (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Last Answer : d) Parabola

Description : For any part of a beam subjected to uniformly distributed load, Shear force diagram is (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Last Answer : (c) Line inclined to x-axis

Description : For any part of a beam between two concentrated load, Bending moment diagram is a (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Last Answer : (c) Line inclined to x-axis

Description : 7-For any part of the beam, between two concentrated load Shear force diagram is a (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Last Answer : Na

Description : The locus of a point on a thread unwound from a cylinder will be a.A circle b.A cycloid c.A straight line d.A spiral e.An involute

Last Answer : b. A cycloid

Description : If harmonic motion of same frequency and same phase are superimposed in two perpendicular directions ( x and y) then, the resultant motion will be, A) circle B) An ellipse C) An square D) An rectangle

Last Answer : C) An square

Description : The stress-strain curve concrete in compression follows [ A ] a straight line [ B ] a rectangular parabolic curve [ C ] a semi circular arc [ D ] a cubic parabola

Last Answer : [ B ] a rectangular parabolic curve

Description : The stress-strain curve concrete in compression follows [ A ] a straight line [ B ] a rectangular parabolic curve [ C ] a semi circular arc [ D ] a cubic parabola

Last Answer : [ B ] a rectangular parabolic curve

Description : Which one of the following does not belong to the family of conics? a.Parabola b.Ellipse c.Hyperbola d.Line

Last Answer : d.Line

Description : A man in a train moving with a constant velocity drops a ball on the platform. The path of the ban as seen by an observer standing on the platform is – (1) A straight line (2) A circle (3) A parabola (4) None of these

Last Answer : (3) A parabola Explanation: In the reference frame of the platform the ball has initial horizontal velocity equal to the velocity of the train. The vertical direction is the same observed on the train because both observers agree that gravity is acting on the ball causing an acceleration g.

Description : A boy sitting in a train moving with a uniform velocity drops a coin outside. A man standing outside the train will find the trajectory of the coin to be - (1) a parabola (2) a horizontal straight line (3) a vertical straight line (4) a circle

Last Answer : (1) a parabola Explanation: Parabola, because when the coin is dropped at a particular point, it has the same velocity as the running train. So, by Newton's first law, it continues its motion horizontally with that velocity.

Description : A man in a train moving with a constant velocity drops a ball on the platform. The path of the ball as seen by an observer standing on the platform is (1) A straight line (2) A circle (3) A parabola (4) None of these

Last Answer : A parabola

Description : In tangential tacheometry, an ordinary level staff is used (A) Leaning towards the instrument for inclined sights upward (B) Leaning away from the instrument for inclined sights downwards (C) Vertical in all cases (D) None of these

Last Answer : (C) Vertical in all cases

Description : The bending moment diagram for a cantilever with U.D.L. over the whole span will be (a) Triangle (b) Rectangle (c) Parabola (d) Ellipse

Last Answer : (c) Parabola

Description : The locus of the middle points of the focal chords of the parabola, `y^2=4x` is:

Last Answer : The locus of the middle points of the focal chords of the parabola, `y^2=4x` is: A. `y^2=x-1` B. `y^2=2(x-1)` C. `y^2=2(1-x)` D. None

Description : Straight, parallel and widely spaced contours represent (A) A steep surface (B) A flat surface (C) An inclined plane surface (D) Curved surface

Last Answer : (C) An inclined plane surface

Description : Terzaghi's analysis assumes: (A) Soil is homogeneous and isotropic (B) Elastic zone has straight boundaries inclined at = to the horizontal and plastic zones fully developed (C) Failure zones do not extend above the horizontal plane through the base of the footing (D) All the above

Last Answer : Answer: Option D

Description : Angle of obliquity is defined as a. Angle between the plane on which stresses are evaluated and one of the given planes b. Angle between resultant stress and the plane of given normal stress c. Angle between resultant stress and shear stress d. Angle between resultant stress and normal stress

Last Answer : d. Angle between resultant stress and normal stress

Description : If compressive yield stress and tensile yield stress are equivalent, then region of safety from maximum principal stress theory is of which shape? a) Rectangle b) Square c) Circle d) Ellipse

Last Answer : b) Square

Description : Pick up the correct statement from the following: (A) The surface defined by the locus of points having same phase, is called a wave front (B) The wave whose surface of constant phase are parallel planes, ... waves is important and not the absolute phase of a point on the wave (D) All of these

Last Answer : Answer: Option D

Description : A cable with a uniformly distributed load per horizontal metre run will take the following shape (A) Straight line (B) Parabola (C) Hyperbola (D) Elliptical

Last Answer : (B) Parabola

Description : Camber in pavements is provided by (A) Straight line method (B) Parabola method (C) Straight at the edges and parabolic at the crown (D) All the above

Last Answer : Answer: Option D

Description : 0 Pick up the correct statement from the following: (A) The point through which the resultant of the shear stresses passes is known as shear centre (B) In the standard rolled channels, the shear centre ... horizontal plane and away from the C.G., outside of the leg projection (D) All the above

Last Answer : (D) All the above

Description : A point moves in such a manner that its distance from a fixed point is equal to its distance from a fixed line multiplied by a constant greater than one. The locus of the path traced by the point will be a a.Cycloid b.Hyperbola c.Circle d.Involute e.Ellipsc

Last Answer : d. Involute

Description : A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of ... N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°

Last Answer : Answer: Option B

Description : The major principal stress in an element of cohesion-less soil within the backfill of a retaining wall is (A) Vertical if the soil is in an active state of plastic equilibrium (B) Vertical if the ... state of plastic equilibrium (C) Inclined at 45° to the vertical plane (D) None of the above

Last Answer : Answer: Option A

Description : The angle of friction is a.The angle which frictional force makes with the normal b.The anle at which the force applied from external souce will cause movement c.The angle at which fictional ... the normal reaction and the resultant of normal reaction and the limiting friction e.None of the above

Last Answer : d. The angle between the normal reaction and the resultant of normal reaction and the limiting friction

Description : A retaining wall 6m high supports a backfill with a surcharge angle of 10°. The back of the wall is inclined to the vertical at a positive batter angle of 5°. If the angle of wall friction is 7°, then the resultant ... inclined to the horizontal at an angle of (A) 7° (B) 10° (C) 12° (D) 17

Last Answer : (C) 12°

Description : When two forces acting at a point are such that if the direction of one is reversed, the direction of the resultant is turned through a right angle, the forces must be a.inclined at more than 90? b.inclined at less than 90? c.equal in magnitude d.acting at 180? e.107 dynes

Last Answer : c. equal in magnitude

Description : The locus of instantaneous centre of a moving rigid body a.Epicycloid b.Straight line c.Involute d.Cycloid e.Centrode

Last Answer : e. Centrode

Description : The angle between normal stress and tangential stress is known as angle of ______ a. declination b. orientation c. obliquity d. rotation

Last Answer : c. obliquity

Description : Shear stress in the beam acting on the cross section is (a) Normal to the cross section (b) Tangential to the cross section (c) Neither normal nor tangential (d) None

Last Answer : b) Tangential to the cross section

Description : If S, L and R are the arc length, long chord and radius of the sliding circle then the perpendicular distance of the line of the resultant cohesive force, is given by (A) a = S.R/L (B) a = L.S/R (C) a = L.R/S (D) None of these

Last Answer : (A) a = S.R/L

Description : An equipotential line is __________ to the velocity vector at every point. (A) Normal (B) Parallel (C) Tangential (D) None of these

Last Answer : (A) Normal

Description : A boy sitting in a rail road car throws a ball straight up into the air. The ball will fall back into his hands when the rail road car is a.moving at constant velocity b.accelerating ... inclined plane, while another identical block B is released for free fall from the same height e.decelerating

Last Answer : a. moving at constant velocity

Description : According to principle of moments  (A) If a system of coplanar forces is in equilibrium, then their algebraic sum is zero  (B) If a system of coplanar forces is in equilibrium, then the ... of  their resultant about the same point  (D) Positive and negative couples can be balanced

Last Answer : (C) The algebraic sum of the moments of any two forces about any point is equal to moment of  their resultant about the same point 

Description : If two chords of a circle with a common end-point are inclined equally to the diameter through this common end-point, then prove that chords are equal. -Maths 9th

Last Answer : Let AB and AC be two chords and AD be the diameter of the circle . Draw OL ⊥ AB and OM ⊥ AC . In ΔOLA and ΔOMA ∠ OLA = ∠ OMA = 90° OA = OA [common sides] ∠ OAL = ∠ OAM [given] . OLA ≅ OMA [by ASA congruency] OL =OM (by CPCT) Chords AM and AC are equidistant from O. ∴ AB = AC Hence proved.

Description : If two chords of a circle with a common end-point are inclined equally to the diameter through this common end-point, then prove that chords are equal. -Maths 9th

Last Answer : Let AB and AC be two chords and AD be the diameter of the circle . Draw OL ⊥ AB and OM ⊥ AC . In ΔOLA and ΔOMA ∠ OLA = ∠ OMA = 90° OA = OA [common sides] ∠ OAL = ∠ OAM [given] . OLA ≅ OMA [by ASA congruency] OL =OM (by CPCT) Chords AM and AC are equidistant from O. ∴ AB = AC Hence proved.

Description : Whether a given point in the S-plane lies on the Root Locus of a system can be determined by (A) Magnitude criterion (B) Angle Criterion (C) Both Magnitude and Angle Criteria (D) Break-in and Break-away Criteria

Last Answer : Whether a given point in the S-plane lies on the Root Locus of a system can be determined by Angle Criterion