We translate a two-dimensional point by adding a.Translation distances b.Translation difference c.X and Y d.Only a

We translate a two-dimensional point by adding a.Translation distances b.Translation difference c.X and Y d.Only a
by

1 Answer

Answer :

d.Only a
by

Related questions

The translation distances (dx, dy) is called as a.Translation vector b.Shift vector c.Both a and b d.Neither a nor b

Description : The translation distances (dx, dy) is called as a.Translation vector b.Shift vector c.Both a and b d.Neither a nor b

Last Answer : c.Both a and b

The two-dimensional translation equation in the matrix form is a.P’=P+T b.P’=P-T c.P’=P*T d.P’=P

Description : The two-dimensional translation equation in the matrix form is a.P’=P+T b.P’=P-T c.P’=P*T d.P’=P

Last Answer : a.P’=P+T

Polygons are translated by adding to the coordinate positionof each vertex and the current attribute setting. a.Straight line path b.Translation vector c.Differences d.Only b

Description : Polygons are translated by adding to the coordinate positionof each vertex and the current attribute setting. a.Straight line path b.Translation vector c.Differences d.Only b

Last Answer : d.Only b

In 2D-translation, a point (x, y) can move to the new position (x’, y’) by usingthe equation a.x’=x+dx and y’=y+dx b.x’=x+dx and y’=y+dy c.X’=x+dy and Y’=y+dx d.X’=x-dx and y’=y-dy

Description : In 2D-translation, a point (x, y) can move to the new position (x’, y’) by usingthe equation a.x’=x+dx and y’=y+dx b.x’=x+dx and y’=y+dy c.X’=x+dy and Y’=y+dx d.X’=x-dx and y’=y-dy

Last Answer : b.x’=x+dx and y’=y+dy

Mathematically, the ellipse is a curve generated by a point moving in space such that atany position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Description : Mathematically, the ellipse is a curve generated by a point moving in space such that atany position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Last Answer : a.the major diameter

Mathematically, the ellipse is a curve generated by a point moving in space such thatat any position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Description : Mathematically, the ellipse is a curve generated by a point moving in space such thatat any position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Last Answer : a.the major diameter

To generate a rotation , we must specify a.Rotation angle θ b.Distances dx and dy c.Rotation distance d.All of the mentioned

Description : To generate a rotation , we must specify a.Rotation angle θ b.Distances dx and dy c.Rotation distance d.All of the mentioned

Last Answer : a.Rotation angle θ

To change the position of a circle or ellipse we translate a.Center coordinates b.Center coordinates and redraw the figure in new location c.Outline coordinates d.All of the mentioned

Description : To change the position of a circle or ellipse we translate a.Center coordinates b.Center coordinates and redraw the figure in new location c.Outline coordinates d.All of the mentioned

Last Answer : b.Center coordinates and redraw the figure in new location

A two dimensional rotation is applied to an object by a.Repositioning it along with straight line path b.Repositioning it along with circular path c.Only b d.Any of the mentioned

Description : A two dimensional rotation is applied to an object by a.Repositioning it along with straight line path b.Repositioning it along with circular path c.Only b d.Any of the mentioned

Last Answer : c.Only b

Positive values for the rotation angle θ defines a.Counter clockwise rotations about the end points b.Counter clockwise translation about the pivot point c.Counter clockwise rotations about the pivot point d.Negative direction

Description : Positive values for the rotation angle θ defines a.Counter clockwise rotations about the end points b.Counter clockwise translation about the pivot point c.Counter clockwise rotations about the pivot point d.Negative direction

Last Answer : c.Counter clockwise rotations about the pivot point

A translation is applied to an object by D a.Repositioning it along with straight line path b.Repositioning it along with circular path c.Only b d.All of the mentioned

Description : A translation is applied to an object by D a.Repositioning it along with straight line path b.Repositioning it along with circular path c.Only b d.All of the mentioned

Last Answer : a.Repositioning it along with straight line path

The STL files translate the part geometry from a CAD system to________ a.CNC machine b.VMC machine c.RP machine d.CAPP machine

Description : The STL files translate the part geometry from a CAD system to________ a.CNC machine b.VMC machine c.RP machine d.CAPP machine

Last Answer : c.RP machine

The applications of the Finite Element Method in two-dimensional analyses are . a.stretching of plates b.gravity of dams c.axisymmetric shells d.all of the above

Description : The applications of the Finite Element Method in two-dimensional analyses are . a.stretching of plates b.gravity of dams c.axisymmetric shells d.all of the above

Last Answer : c.axisymmetric shells

From the following, which type of element is not two dimensional? a.Tetrahedron b.Quadrilateral c.Parallelogram d.Rectangle

Description : From the following, which type of element is not two dimensional? a.Tetrahedron b.Quadrilateral c.Parallelogram d.Rectangle

Last Answer : a.Tetrahedron

Which of the following uses a number of two-dimensional profiles for generating athree-dimensional object? a.Tweaking b.Lofting c.Filleting d.none of the above

Description : Which of the following uses a number of two-dimensional profiles for generating athree-dimensional object? a.Tweaking b.Lofting c.Filleting d.none of the above

Last Answer : b.Lofting

The two-dimensional rotation equation in the matrix form is a.P’=T+P b.P’=S*P c.P’=R*P d.P’=dx+dy

Description : The two-dimensional rotation equation in the matrix form is a.P’=T+P b.P’=S*P c.P’=R*P d.P’=dx+dy

Last Answer : c.P’=R*P

Which of the following RP technologies uses molten material as the starting material? a.Three-Dimensional Printing b.Fused-Deposition Modeling c.Stereolithography d.Selective Laser Sintering

Description : Which of the following RP technologies uses molten material as the starting material? a.Three-Dimensional Printing b.Fused-Deposition Modeling c.Stereolithography d.Selective Laser Sintering

Last Answer : c.Stereolithography

Example for one – Dimensional element is . a.triangular element b.brick element c.truss element d.axisymmetric element

Description : Example for one – Dimensional element is . a.triangular element b.brick element c.truss element d.axisymmetric element

Last Answer : c.truss element

In the following three-dimensional modelling techniques. Which do not requiremuch computer time and memory? a.Surface modelling b.Solid modelling c.Wireframe modelling d.All of the above

Description : In the following three-dimensional modelling techniques. Which do not requiremuch computer time and memory? a.Surface modelling b.Solid modelling c.Wireframe modelling d.All of the above

Last Answer : c.Wireframe modelling

In Coordinates, a points in n-dimensional space is represent by(n+1) coordinates. a.Scaling b.Homogeneous c.Inverse transformation d.3D Transformation

Description : In Coordinates, a points in n-dimensional space is represent by(n+1) coordinates. a.Scaling b.Homogeneous c.Inverse transformation d.3D Transformation

Last Answer : b.Homogeneous

Shearing and reflection are types of translation. a.TRUE b.FALSE c. d.

Description : Shearing and reflection are types of translation. a.TRUE b.FALSE c. d.

Last Answer : b.FALSE

The transformation that is used to alter the size of an object is a.Scaling b.Rotation c.Translation d.Reflection

Description : The transformation that is used to alter the size of an object is a.Scaling b.Rotation c.Translation d.Reflection

Last Answer : a.Scaling

The rotation axis that is perpendicular to the xy plane and passes through the pivot pointis known as a.Rotation b.Translation c.Scaling d.Shearing

Description : The rotation axis that is perpendicular to the xy plane and passes through the pivot pointis known as a.Rotation b.Translation c.Scaling d.Shearing

Last Answer : a.Rotation

The basic geometric transformations are a.Translation b.Rotation c.Scaling d.All of the mentioned

Description : The basic geometric transformations are a.Translation b.Rotation c.Scaling d.All of the mentioned

Last Answer : d.All of the mentioned

-------is a rigid body transformation that moves objects without deformation. a.Rotation b.Scaling c.Translation d.All of the mentioned

Description : -------is a rigid body transformation that moves objects without deformation. a.Rotation b.Scaling c.Translation d.All of the mentioned

Last Answer : c.Translation

Which co-ordinates allow common vector operations such as translation, rotation,scaling and perspective projection to be represented as a matrix by which the vector is multiplied? a.vector co-ordinates b.3D co-ordinates c.affine co-ordinates d.homogenous co-ordinates

Description : Which co-ordinates allow common vector operations such as translation, rotation,scaling and perspective projection to be represented as a matrix by which the vector is multiplied? a.vector co-ordinates b.3D co-ordinates c.affine co-ordinates d.homogenous co-ordinates

Last Answer : d.homogenous co-ordinates

The matrix representation for translation in homogeneous coordinates is a.User Coordinate System b.World Coordinate System c.Screen Coordinate System d.None of the above

Description : The matrix representation for translation in homogeneous coordinates is a.User Coordinate System b.World Coordinate System c.Screen Coordinate System d.None of the above

Last Answer : b.World Coordinate System

If point are expressed in homogeneous coordinates then the pair of (x, y) isrepresented as a.(x’, y’, z’) b.(x, y, z) c.(x’, y’, w’) d.(x’, y’, w)

Description : If point are expressed in homogeneous coordinates then the pair of (x, y) isrepresented as a.(x’, y’, z’) b.(x, y, z) c.(x’, y’, w’) d.(x’, y’, w)

Last Answer : d.(x’, y’, w)

Scaling of a polygon is done by computing a.The product of (x, y) of each vertex b.(x, y) of end points c.Center coordinates d.Only a

Description : Scaling of a polygon is done by computing a.The product of (x, y) of each vertex b.(x, y) of end points c.Center coordinates d.Only a

Last Answer : d.Only a

Secondary Linear Axes U,V & W are ……… to X,Y & Z-axis. a.Perpendicular b.Parallel c.Rotational d.All of the above

Description : Secondary Linear Axes U,V & W are ……… to X,Y & Z-axis. a.Perpendicular b.Parallel c.Rotational d.All of the above

Last Answer : b.Parallel

B rotational axis is rotation about Axis. a.X b.Y c.Z d.C

Description : B rotational axis is rotation about Axis. a.X b.Y c.Z d.C

Last Answer : a.X

Parametric equation for circle a.X=x+Rcosu; Y=y+Rsinu; Z=z b.X=Rcosu; Y=Rsinu; Z=z c.X=x+Rsinu; Y=y+Rcosu; Z=z d.X=Rsinu; Y=y+Rcosu; Z=z

Description : Parametric equation for circle a.X=x+Rcosu; Y=y+Rsinu; Z=z b.X=Rcosu; Y=Rsinu; Z=z c.X=x+Rsinu; Y=y+Rcosu; Z=z d.X=Rsinu; Y=y+Rcosu; Z=z

Last Answer : a.X=x+Rcosu; Y=y+Rsinu; Z=z

A line AB with end points A (2, 1) & B (7, 6) is to be moved by 3 units in x-direction & 4units in y-direction. Calculate new coordinates of points B. a.(10, 2) b.(2, 10) c.(10, 10) d.(10, 5)

Description : A line AB with end points A (2, 1) & B (7, 6) is to be moved by 3 units in x-direction & 4units in y-direction. Calculate new coordinates of points B. a.(10, 2) b.(2, 10) c.(10, 10) d.(10, 5)

Last Answer : c.(10, 10)

By changing the dimensions of the viewport, the and ofthe objects being displayed can be manipulated. a.Number of pixels and image quality b.X co-ordinate and Y co-ordinate c.Size and proportions d.All of these

Description : By changing the dimensions of the viewport, the and ofthe objects being displayed can be manipulated. a.Number of pixels and image quality b.X co-ordinate and Y co-ordinate c.Size and proportions d.All of these

Last Answer : c.Size and proportions

If a ‘3 x 3’ matrix shears in Y direction, how many elements of it are ‘0’? a.2 b.3 c.6 d.5

Description : If a ‘3 x 3’ matrix shears in Y direction, how many elements of it are ‘0’? a.2 b.3 c.6 d.5

Last Answer : d.5

Which of the following represents shearing? a.(x, y) → (x+shx, y+shy) b.(x, y) → (ax, by) c.(x, y) → (x cos(θ)+y sin(θ), -x sin(θ)+y cos(θ)) d.(x, y) → (x+shy, y+shx)

Description : Which of the following represents shearing? a.(x, y) → (x+shx, y+shy) b.(x, y) → (ax, by) c.(x, y) → (x cos(θ)+y sin(θ), -x sin(θ)+y cos(θ)) d.(x, y) → (x+shy, y+shx)

Last Answer : d.(x, y) → (x+shy, y+shx)

The polygons are scaled by applying the following transformation. a.X’=x * Sx + Xf(1-Sx) & Y’=y * Sy + Yf(1-Sy) b.X’=x * Sx + Xf(1+Sx) & Y’=y * Sy + Yf(1+Sy c.X’=x * Sx + Xf(1-Sx) & Y’=y * Sy – Yf(1-Sy) d.X’=x * Sx * Xf(1-Sx) & Y’=y * Sy * Yf(1-Sy)

Description : The polygons are scaled by applying the following transformation. a.X’=x * Sx + Xf(1-Sx) & Y’=y * Sy + Yf(1-Sy) b.X’=x * Sx + Xf(1+Sx) & Y’=y * Sy + Yf(1+Sy c.X’=x * Sx + Xf(1-Sx) & Y’=y * Sy – Yf(1-Sy) d.X’=x * Sx * Xf(1-Sx) & Y’=y * Sy * Yf(1-Sy)

Last Answer : a.X’=x * Sx + Xf(1-Sx) & Y’=y * Sy + Yf(1-Sy)

The general homogeneous coordinate representation can also be written as a.(h.x, h.y, h.z) b.(h.x, h.y, h) c.(x, y, h.z) d.(x,y,z)

Description : The general homogeneous coordinate representation can also be written as a.(h.x, h.y, h.z) b.(h.x, h.y, h) c.(x, y, h.z) d.(x,y,z)

Last Answer : b.(h.x, h.y, h)

We can combine the multiplicative and translational terms for 2D into a singlematrix representation by expanding a.2 x 2 matrix into 4x4 matrix b.2 x 2 matrix into 3 x 3 c.3 x 3 matrix into 2 x 2 d.Only c

Description : We can combine the multiplicative and translational terms for 2D into a singlematrix representation by expanding a.2 x 2 matrix into 4x4 matrix b.2 x 2 matrix into 3 x 3 c.3 x 3 matrix into 2 x 2 d.Only c

Last Answer : b.2 x 2 matrix into 3 x 3

We control the location of a scaled object by choosing the position is knownas……………………………. a.Pivot point b.Fixed point c.Differential scaling d.Uniform scaling

Description : We control the location of a scaled object by choosing the position is knownas……………………………. a.Pivot point b.Fixed point c.Differential scaling d.Uniform scaling

Last Answer : b.Fixed point

In a CAD package, mirror image of a 2D point P (5, 10) is to be obtained about a line whichpasses through the origin and makes an angle of 45° counterclockwise with the X-axis. The coordinates of the transformed point will be a.(7.5, 5) b.(10, 5) c.(7.5, -5) d.(10, -5)

Description : In a CAD package, mirror image of a 2D point P (5, 10) is to be obtained about a line whichpasses through the origin and makes an angle of 45° counterclockwise with the X-axis. The coordinates of the transformed point will be a.(7.5, 5) b.(10, 5) c.(7.5, -5) d.(10, -5)

Last Answer : b.(10, 5)

The truss element can resist only a.surface force b.axial force c.point load d.none of the above

Description : The truss element can resist only a.surface force b.axial force c.point load d.none of the above

Last Answer : b.axial force

A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre

Description : A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre

Last Answer : d.Line Joining Chuck centre & tail stock centre

Find parametric equation for Y-coordinates of Hermite cubic spline curve having endpoints P0[4,4]; P1[8,5] a.2u3-3u2+2u+4 b.3u3-2u2-2u-4 c.2u3-3u2-2u-4 d.2u3+3u2+2u+4

Description : Find parametric equation for Y-coordinates of Hermite cubic spline curve having endpoints P0[4,4]; P1[8,5] a.2u3-3u2+2u+4 b.3u3-2u2-2u-4 c.2u3-3u2-2u-4 d.2u3+3u2+2u+4

Last Answer : a.2u3-3u2+2u+4

Reflection about the line y=0, the axis, is accomplished with the transformationmatrix with how many elements as ‘0’? a.8 b.9 c.4 d.6

Description : Reflection about the line y=0, the axis, is accomplished with the transformationmatrix with how many elements as ‘0’? a.8 b.9 c.4 d.6

Last Answer : d.6

A circle is passing through two end points A[6,4] and B[10,10]. Find center point ofcircle a.7,8 b.8,8 c.8,7 d.7,7

Description : A circle is passing through two end points A[6,4] and B[10,10]. Find center point ofcircle a.7,8 b.8,8 c.8,7 d.7,7

Last Answer : c.8,7

NC contouring is an example of a.Continuous path positioning b.Point-to-point positioning c.Absolute positioning d.Incremental positioning

Description : NC contouring is an example of a.Continuous path positioning b.Point-to-point positioning c.Absolute positioning d.Incremental positioning

Last Answer : a.Continuous path positioning

Which of the following code will give point to point movement? a.G00 b.G01 c.G56 d.G94

Description : Which of the following code will give point to point movement? a.G00 b.G01 c.G56 d.G94

Last Answer : a.G00

Which of the following code is used to return to a reference point? a.G23 b.G28 c.G14 d.G19

Description : Which of the following code is used to return to a reference point? a.G23 b.G28 c.G14 d.G19

Last Answer : b.G28

To indicate the position of the workpiece ly & easily machine zero pint should be displacedto another point on the workpiece called… a.Workpiece zero Point b.machine Zero Point c.Start Point d.Program Zero point

Description : To indicate the position of the workpiece ly & easily machine zero pint should be displacedto another point on the workpiece called… a.Workpiece zero Point b.machine Zero Point c.Start Point d.Program Zero point

Last Answer : a.Workpiece zero Point