To generate a rotation , we must specify a.Rotation angle θ b.Distances dx and dy c.Rotation distance d.All of the mentioned

To generate a rotation , we must specify a.Rotation angle θ b.Distances dx and dy c.Rotation distance d.All of the mentioned
by

1 Answer

Answer :

a.Rotation angle θ
by

Related questions

The translation distances (dx, dy) is called as a.Translation vector b.Shift vector c.Both a and b d.Neither a nor b

Description : The translation distances (dx, dy) is called as a.Translation vector b.Shift vector c.Both a and b d.Neither a nor b

Last Answer : c.Both a and b

Positive values for the rotation angle θ defines a.Counter clockwise rotations about the end points b.Counter clockwise translation about the pivot point c.Counter clockwise rotations about the pivot point d.Negative direction

Description : Positive values for the rotation angle θ defines a.Counter clockwise rotations about the end points b.Counter clockwise translation about the pivot point c.Counter clockwise rotations about the pivot point d.Negative direction

Last Answer : c.Counter clockwise rotations about the pivot point

The two-dimensional rotation equation in the matrix form is a.P’=T+P b.P’=S*P c.P’=R*P d.P’=dx+dy

Description : The two-dimensional rotation equation in the matrix form is a.P’=T+P b.P’=S*P c.P’=R*P d.P’=dx+dy

Last Answer : c.P’=R*P

General pivot point rotation can be expressed as a.T(zr,yr).R(θ).T(-zr,-yr) = R(xr,yr,θ) b.T(xr,yr).R(θ).T(-xr,-yr) = R(xr,yr,θ) c.T(xr,yr).R(θ).T(-xr,-yr) = R(zr,yr,θ) d.T(xr,yr).R(θ).T(-xr,-yr) = R(zr,yr,θ)

Description : General pivot point rotation can be expressed as a.T(zr,yr).R(θ).T(-zr,-yr) = R(xr,yr,θ) b.T(xr,yr).R(θ).T(-xr,-yr) = R(xr,yr,θ) c.T(xr,yr).R(θ).T(-xr,-yr) = R(zr,yr,θ) d.T(xr,yr).R(θ).T(-xr,-yr) = R(zr,yr,θ)

Last Answer : b.T(xr,yr).R(θ).T(-xr,-yr) = R(xr,yr,θ)

A straight line segment is translated by applying the transformation equation a.P’=P+T b.Dx and Dy c.P’=P+P d.Only c

Description : A straight line segment is translated by applying the transformation equation a.P’=P+T b.Dx and Dy c.P’=P+P d.Only c

Last Answer : a.P’=P+T

In 2D-translation, a point (x, y) can move to the new position (x’, y’) by usingthe equation a.x’=x+dx and y’=y+dx b.x’=x+dx and y’=y+dy c.X’=x+dy and Y’=y+dx d.X’=x-dx and y’=y-dy

Description : In 2D-translation, a point (x, y) can move to the new position (x’, y’) by usingthe equation a.x’=x+dx and y’=y+dx b.x’=x+dx and y’=y+dy c.X’=x+dy and Y’=y+dx d.X’=x-dx and y’=y-dy

Last Answer : b.x’=x+dx and y’=y+dy

The matrix representation for scaling in homogeneous coordinates is a.P’=S*P b.P’=R*P c.P’=dx+dy d.P’=S*S

Description : The matrix representation for scaling in homogeneous coordinates is a.P’=S*P b.P’=R*P c.P’=dx+dy d.P’=S*S

Last Answer : a.P’=S*P

Which of the following represents shearing? a.(x, y) → (x+shx, y+shy) b.(x, y) → (ax, by) c.(x, y) → (x cos(θ)+y sin(θ), -x sin(θ)+y cos(θ)) d.(x, y) → (x+shy, y+shx)

Description : Which of the following represents shearing? a.(x, y) → (x+shx, y+shy) b.(x, y) → (ax, by) c.(x, y) → (x cos(θ)+y sin(θ), -x sin(θ)+y cos(θ)) d.(x, y) → (x+shy, y+shx)

Last Answer : d.(x, y) → (x+shy, y+shx)

Rotation of spindle is designated by one of the following axis: a.a-axis b.b-axis c.c-axis d.none of the mentioned

Description : Rotation of spindle is designated by one of the following axis: a.a-axis b.b-axis c.c-axis d.none of the mentioned

Last Answer : d.none of the mentioned

Rotation about Z-axis is called…………. a.a-axis b.b-axis c.c-axis d.none of the mentioned

Description : Rotation about Z-axis is called…………. a.a-axis b.b-axis c.c-axis d.none of the mentioned

Last Answer : c.c-axis

A two dimensional rotation is applied to an object by a.Repositioning it along with straight line path b.Repositioning it along with circular path c.Only b d.Any of the mentioned

Description : A two dimensional rotation is applied to an object by a.Repositioning it along with straight line path b.Repositioning it along with circular path c.Only b d.Any of the mentioned

Last Answer : c.Only b

The basic geometric transformations are a.Translation b.Rotation c.Scaling d.All of the mentioned

Description : The basic geometric transformations are a.Translation b.Rotation c.Scaling d.All of the mentioned

Last Answer : d.All of the mentioned

-------is a rigid body transformation that moves objects without deformation. a.Rotation b.Scaling c.Translation d.All of the mentioned

Description : -------is a rigid body transformation that moves objects without deformation. a.Rotation b.Scaling c.Translation d.All of the mentioned

Last Answer : c.Translation

We translate a two-dimensional point by adding a.Translation distances b.Translation difference c.X and Y d.Only a

Description : We translate a two-dimensional point by adding a.Translation distances b.Translation difference c.X and Y d.Only a

Last Answer : d.Only a

Mathematically, the ellipse is a curve generated by a point moving in space such that atany position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Description : Mathematically, the ellipse is a curve generated by a point moving in space such that atany position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Last Answer : a.the major diameter

Mathematically, the ellipse is a curve generated by a point moving in space such thatat any position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Description : Mathematically, the ellipse is a curve generated by a point moving in space such thatat any position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Last Answer : a.the major diameter

A use computer to automatically generate process plans is? a.Lower-level strategies b.Intermediate strategies c.Higher-level strategies d.Morden-level strategies

Description : A use computer to automatically generate process plans is? a.Lower-level strategies b.Intermediate strategies c.Higher-level strategies d.Morden-level strategies

Last Answer : c.Higher-level strategies

Choose the correct sequence to generate prototype a.3D CAD data - CAD solid model - STL file - RP prototype b.CAD solid model - 3D CAD data - RP prototype - STL file c.STL file - 3D CAD data - CAD solid model - RP prototype d.3D CAD data - STL file - CAD solid model - RP prototype

Description : Choose the correct sequence to generate prototype a.3D CAD data - CAD solid model - STL file - RP prototype b.CAD solid model - 3D CAD data - RP prototype - STL file c.STL file - 3D CAD data - CAD solid model - RP prototype d.3D CAD data - STL file - CAD solid model - RP prototype

Last Answer : a.3D CAD data - CAD solid model - STL file - RP prototype

B rotational axis is rotation about Axis. a.X b.Y c.Z d.C

Description : B rotational axis is rotation about Axis. a.X b.Y c.Z d.C

Last Answer : a.X

In CNC Program M03 is refer to…… a.Spindle ON in Clockwise rotation b.Spindle ON in Counter Clockwise rotation c.Spindle OFF in Clockwise rotation d.Spindle OFF in Counter Clockwise rotation

Description : In CNC Program M03 is refer to…… a.Spindle ON in Clockwise rotation b.Spindle ON in Counter Clockwise rotation c.Spindle OFF in Clockwise rotation d.Spindle OFF in Counter Clockwise rotation

Last Answer : a.Spindle ON in Clockwise rotation

Which transformation distorts the shape of an object such that the transformed shapeappears as if the object were composed of internal layers that had been caused to slide over each other? a.Rotation b.Scaling up c.Scaling down d.Shearing

Description : Which transformation distorts the shape of an object such that the transformed shapeappears as if the object were composed of internal layers that had been caused to slide over each other? a.Rotation b.Scaling up c.Scaling down d.Shearing

Last Answer : d.Shearing

If two pure reflections about a line passing through the origin are appliedsuccessively the result is a.Pure rotation b.Quarter rotation c.Half rotation d.True reflection

Description : If two pure reflections about a line passing through the origin are appliedsuccessively the result is a.Pure rotation b.Quarter rotation c.Half rotation d.True reflection

Last Answer : a.Pure rotation

Reflection is a special case of rotation. a.TRUE b.FALSE c. d.

Description : Reflection is a special case of rotation. a.TRUE b.FALSE c. d.

Last Answer : b.FALSE

If the scaling factors values Sx and Sy are assigned to unequal values then a.Uniform rotation is produced b.Uniform scaling is produced c.Differential scaling is produced d.Scaling cannot be done

Description : If the scaling factors values Sx and Sy are assigned to unequal values then a.Uniform rotation is produced b.Uniform scaling is produced c.Differential scaling is produced d.Scaling cannot be done

Last Answer : c.Differential scaling is produced

If the scaling factors values sx and sy are assigned to the same value then……… a.Uniform rotation is produced b.Uniform scaling is produced c.Scaling cannot be done d.Scaling can be done or cannot be done

Description : If the scaling factors values sx and sy are assigned to the same value then……… a.Uniform rotation is produced b.Uniform scaling is produced c.Scaling cannot be done d.Scaling can be done or cannot be done

Last Answer : b.Uniform scaling is produced

The transformation that is used to alter the size of an object is a.Scaling b.Rotation c.Translation d.Reflection

Description : The transformation that is used to alter the size of an object is a.Scaling b.Rotation c.Translation d.Reflection

Last Answer : a.Scaling

Rotation is simply---------object w.r.t origin or centre point. a.Turn b.Shift c.Compression d.Drag element

Description : Rotation is simply---------object w.r.t origin or centre point. a.Turn b.Shift c.Compression d.Drag element

Last Answer : a.Turn

From the following, which one will require 4 matrices to multiply to get the final position? a.Rotation about the origin b.Rotation about an arbitrary Point c.Rotation about an arbitrary line d.Scaling about the origin

Description : From the following, which one will require 4 matrices to multiply to get the final position? a.Rotation about the origin b.Rotation about an arbitrary Point c.Rotation about an arbitrary line d.Scaling about the origin

Last Answer : b.Rotation about an arbitrary Point

The rotation axis that is perpendicular to the xy plane and passes through the pivot pointis known as a.Rotation b.Translation c.Scaling d.Shearing

Description : The rotation axis that is perpendicular to the xy plane and passes through the pivot pointis known as a.Rotation b.Translation c.Scaling d.Shearing

Last Answer : a.Rotation

Which co-ordinates allow common vector operations such as translation, rotation,scaling and perspective projection to be represented as a matrix by which the vector is multiplied? a.vector co-ordinates b.3D co-ordinates c.affine co-ordinates d.homogenous co-ordinates

Description : Which co-ordinates allow common vector operations such as translation, rotation,scaling and perspective projection to be represented as a matrix by which the vector is multiplied? a.vector co-ordinates b.3D co-ordinates c.affine co-ordinates d.homogenous co-ordinates

Last Answer : d.homogenous co-ordinates

To change the position of a circle or ellipse we translate a.Center coordinates b.Center coordinates and redraw the figure in new location c.Outline coordinates d.All of the mentioned

Description : To change the position of a circle or ellipse we translate a.Center coordinates b.Center coordinates and redraw the figure in new location c.Outline coordinates d.All of the mentioned

Last Answer : b.Center coordinates and redraw the figure in new location

In , the coordinates are mentioned in the program with respect to onePrevious point. a.Incremental System b.Absolute System c.Datum System d.Screen Coordinates System

Description : In , the coordinates are mentioned in the program with respect to onePrevious point. a.Incremental System b.Absolute System c.Datum System d.Screen Coordinates System

Last Answer : a.Incremental System

In , the coordinates are mentioned in the program with respect to onereference point a.Incremental System b.Absolute System c.Datum System d.Screen Coordinates System

Description : In , the coordinates are mentioned in the program with respect to onereference point a.Incremental System b.Absolute System c.Datum System d.Screen Coordinates System

Last Answer : b.Absolute System

The repeatability of NC machine depends on a.control loop errors b.mechanical errors c.electrical errors d.none of the mentioned

Description : The repeatability of NC machine depends on a.control loop errors b.mechanical errors c.electrical errors d.none of the mentioned

Last Answer : b.mechanical errors

Control loop unit of M.C.U is always a.a hardware unit b.a software unit c.a control unit d.none of the mentioned

Description : Control loop unit of M.C.U is always a.a hardware unit b.a software unit c.a control unit d.none of the mentioned

Last Answer : a.a hardware unit

Computer will perform the data processing functions in a.NC b.CNC c.DNC d.None of the mentioned

Description : Computer will perform the data processing functions in a.NC b.CNC c.DNC d.None of the mentioned

Last Answer : b.CNC

Numerical control a.applies only to milling machines b.is a method for producing exact number of parts per hour c.is a method for controlling by means of set of instructions d.None of the mentioned

Description : Numerical control a.applies only to milling machines b.is a method for producing exact number of parts per hour c.is a method for controlling by means of set of instructions d.None of the mentioned

Last Answer : c.is a method for controlling by means of set of instructions

The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the above mentioned operation? a.N010 GO2 X10 Y10 X5 Y5 R5 b.N010 GO3 X10 Y10 X5 Y5 R5 c.N010 GO1 X5 Y5 X10 Y10 R5 d.N010 GO2 X5 Y5 X10 Y10 R5

Description : The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the ... b.N010 GO3 X10 Y10 X5 Y5 R5 c.N010 GO1 X5 Y5 X10 Y10 R5 d.N010 GO2 X5 Y5 X10 Y10 R5

Last Answer : a.N010 GO2 X10 Y10 X5 Y5 R5

The term that is used for geometric modelling like solid modelling, wire frame modellingand drafting is known as a.software package b.operating system c.application software d.none of the mentioned

Description : The term that is used for geometric modelling like solid modelling, wire frame modellingand drafting is known as a.software package b.operating system c.application software d.none of the mentioned

Last Answer : a.software package

Which two disciplines are tied by a common database? a.documentation and geometric modeling b.CAD and CAM c.drafting and documentation d.none of the mentioned

Description : Which two disciplines are tied by a common database? a.documentation and geometric modeling b.CAD and CAM c.drafting and documentation d.none of the mentioned

Last Answer : b.CAD and CAM

A translation is applied to an object by D a.Repositioning it along with straight line path b.Repositioning it along with circular path c.Only b d.All of the mentioned

Description : A translation is applied to an object by D a.Repositioning it along with straight line path b.Repositioning it along with circular path c.Only b d.All of the mentioned

Last Answer : a.Repositioning it along with straight line path

In a CAD package, mirror image of a 2D point P (5, 10) is to be obtained about a line whichpasses through the origin and makes an angle of 45° counterclockwise with the X-axis. The coordinates of the transformed point will be a.(7.5, 5) b.(10, 5) c.(7.5, -5) d.(10, -5)

Description : In a CAD package, mirror image of a 2D point P (5, 10) is to be obtained about a line whichpasses through the origin and makes an angle of 45° counterclockwise with the X-axis. The coordinates of the transformed point will be a.(7.5, 5) b.(10, 5) c.(7.5, -5) d.(10, -5)

Last Answer : b.(10, 5)

A circle is represented by center point [5,5] and radius 6 units. Find the parametricequation of circle and determine the various points on circle in first quadrant if increment in angle by 45o a.9.24,9.24 b.9.42,9.42 c.9,9 d.11,5

Description : A circle is represented by center point [5,5] and radius 6 units. Find the parametricequation of circle and determine the various points on circle in first quadrant if increment in angle by 45o a.9.24,9.24 b.9.42,9.42 c.9,9 d.11,5

Last Answer : a.9.24,9.24

The distance of a given tool tip from the surface of workpiece is known as….. a.Tool length b.Tool length offset H c.Cutter radius d.Compensation

Description : The distance of a given tool tip from the surface of workpiece is known as….. a.Tool length b.Tool length offset H c.Cutter radius d.Compensation

Last Answer : b.Tool length offset H

The parabola is defined mathematically as a curve generated by a point that moves suchthat its distance from the focus is always__________the distance to the directrix a.larger than b.smaller than c.equal to d.none of the above

Description : The parabola is defined mathematically as a curve generated by a point that moves suchthat its distance from the focus is always__________the distance to the directrix a.larger than b.smaller than c.equal to d.none of the above

Last Answer : c.equal to

Which of the following is NOT true?Image formed by reflection through a plane mirror is a.of same size b.same orientation c.is at same distance from the mirror d.virtual

Description : Which of the following is NOT true?Image formed by reflection through a plane mirror is a.of same size b.same orientation c.is at same distance from the mirror d.virtual

Last Answer : b.same orientation

How do you solve (x-y-1)dx + (4y+x-1)dy = 0?

Description : How do you solve (x-y-1)dx + (4y+x-1)dy = 0?

Last Answer : https://www.geteasysolution.com/ entered that equation and it states that it maust be entered in another way? Link above.

Find dy/dx by implicit differentiation. y cos x = 5x2 + 2y2

Description : Find dy/dx by implicit differentiation. y cos x = 5x2 + 2y2

Last Answer : Need Answer

Find dy/dx by implicit differentiation. 7x2 + 5xy − y2 = 8

Description : Find dy/dx by implicit differentiation. 7x2 + 5xy − y2 = 8

Last Answer : Need Answer

If a curve is represented parametrically by the equations `x=4t^(3)+3` and `y=4+3t^(4)` and `(d^(2)x)/(dy^(2))/((dx)/(dy))^(n)` is constant then the v

Description : If a curve is represented parametrically by the equations `x=4t^(3)+3` and `y=4+3t^(4)` and `(d^(2)x)/(dy^(2))/((dx)/(dy))^(n)` is constant then the v

Last Answer : If a curve is represented parametrically by the equations `x=4t^(3)+3` and `y=4+3t^(4)` and `(d^(2) ... (dy))^(n)` is constant then the value of n, is