Description : Coordinate of â- ABCD is WCS are: lowermost corner A(2,2) & diagonal corner are C(8,6). W.r.t MCS. The coordinates of origin of WCS system are (5,4). If the axes of WCS are at 600 in CCW w.r.t. the axes of MCS. Find new ... in MCS. a.(4.268, 6.732) b.(5.268, 6.732) c.(4.268, 4.732) d.(6.268, 4.732)
Last Answer : a.(4.268, 6.732)
Description : General pivot point rotation can be expressed as a.T(zr,yr).R(θ).T(-zr,-yr) = R(xr,yr,θ) b.T(xr,yr).R(θ).T(-xr,-yr) = R(xr,yr,θ) c.T(xr,yr).R(θ).T(-xr,-yr) = R(zr,yr,θ) d.T(xr,yr).R(θ).T(-xr,-yr) = R(zr,yr,θ)
Last Answer : b.T(xr,yr).R(θ).T(-xr,-yr) = R(xr,yr,θ)
Description : From the following, which one will require 4 matrices to multiply to get the final position? a.Rotation about the origin b.Rotation about an arbitrary Point c.Rotation about an arbitrary line d.Scaling about the origin
Last Answer : b.Rotation about an arbitrary Point
Description : The two-dimensional rotation equation in the matrix form is a.P’=T+P b.P’=S*P c.P’=R*P d.P’=dx+dy
Last Answer : c.P’=R*P
Description : If two pure reflections about a line passing through the origin are appliedsuccessively the result is a.Pure rotation b.Quarter rotation c.Half rotation d.True reflection
Last Answer : a.Pure rotation
Description : A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre
Last Answer : d.Line Joining Chuck centre & tail stock centre
Description : Which transformation distorts the shape of an object such that the transformed shapeappears as if the object were composed of internal layers that had been caused to slide over each other? a.Rotation b.Scaling up c.Scaling down d.Shearing
Last Answer : d.Shearing
Description : The transformation that is used to alter the size of an object is a.Scaling b.Rotation c.Translation d.Reflection
Last Answer : a.Scaling
Description : A two dimensional rotation is applied to an object by a.Repositioning it along with straight line path b.Repositioning it along with circular path c.Only b d.Any of the mentioned
Last Answer : c.Only b
Description : Positive values for the rotation angle θ defines a.Counter clockwise rotations about the end points b.Counter clockwise translation about the pivot point c.Counter clockwise rotations about the pivot point d.Negative direction
Last Answer : c.Counter clockwise rotations about the pivot point
Description : In a CAD package, mirror image of a 2D point P (5, 10) is to be obtained about a line whichpasses through the origin and makes an angle of 45° counterclockwise with the X-axis. The coordinates of the transformed point will be a.(7.5, 5) b.(10, 5) c.(7.5, -5) d.(10, -5)
Last Answer : b.(10, 5)
Description : ……… is the origin of the coordinate system which is defined by manufacturer they cannotbe changed a.Blocking Point b.machine Zero Point c.Start Point d.Program Zero point
Last Answer : b.machine Zero Point
Description : A line AB with end point A (2,3) & B (7,8) is to be rotated about origin by 300 inclockwise direction. Determine the coordinates of end points S of rotated line. a.(3.232, 2.598) b.(5.232, 3.598) c.(3.232, 1.298) d.(3.232, 1.598)
Last Answer : d.(3.232, 1.598)
Description : n an NC machining operation, the tool has to be moved from point (5, 4) to point (7, 2) alonga circular path with centre at (5, 2). Before starting the operation, the tool is at (5, 4). The G and N codes for this motion ... 0 I5.0 J2.0 c.N010 GO1 X7.0 Y2.0 I5.0 J2.0 d.N010 GOO X7.0 Y2.0 I5.0 J2.0
Last Answer : b.N010 GO2 X7.0 Y2.0 I5.0 J2.0
Description : The translation distances (dx, dy) is called as a.Translation vector b.Shift vector c.Both a and b d.Neither a nor b
Last Answer : c.Both a and b
Description : B rotational axis is rotation about Axis. a.X b.Y c.Z d.C
Last Answer : a.X
Description : In CNC Program M03 is refer to…… a.Spindle ON in Clockwise rotation b.Spindle ON in Counter Clockwise rotation c.Spindle OFF in Clockwise rotation d.Spindle OFF in Counter Clockwise rotation
Last Answer : a.Spindle ON in Clockwise rotation
Description : Rotation of spindle is designated by one of the following axis: a.a-axis b.b-axis c.c-axis d.none of the mentioned
Last Answer : d.none of the mentioned
Description : Rotation about Z-axis is called…………. a.a-axis b.b-axis c.c-axis d.none of the mentioned
Last Answer : c.c-axis
Description : Reflection is a special case of rotation. a.TRUE b.FALSE c. d.
Last Answer : b.FALSE
Description : If the scaling factors values Sx and Sy are assigned to unequal values then a.Uniform rotation is produced b.Uniform scaling is produced c.Differential scaling is produced d.Scaling cannot be done
Last Answer : c.Differential scaling is produced
Description : If the scaling factors values sx and sy are assigned to the same value then……… a.Uniform rotation is produced b.Uniform scaling is produced c.Scaling cannot be done d.Scaling can be done or cannot be done
Last Answer : b.Uniform scaling is produced
Description : The rotation axis that is perpendicular to the xy plane and passes through the pivot pointis known as a.Rotation b.Translation c.Scaling d.Shearing
Last Answer : a.Rotation
Description : To generate a rotation , we must specify a.Rotation angle θ b.Distances dx and dy c.Rotation distance d.All of the mentioned
Last Answer : a.Rotation angle θ
Description : The basic geometric transformations are a.Translation b.Rotation c.Scaling d.All of the mentioned
Last Answer : d.All of the mentioned
Description : -------is a rigid body transformation that moves objects without deformation. a.Rotation b.Scaling c.Translation d.All of the mentioned
Last Answer : c.Translation
Description : Which co-ordinates allow common vector operations such as translation, rotation,scaling and perspective projection to be represented as a matrix by which the vector is multiplied? a.vector co-ordinates b.3D co-ordinates c.affine co-ordinates d.homogenous co-ordinates
Last Answer : d.homogenous co-ordinates
Description : We control the location of a scaled object by choosing the position is knownas……………………………. a.Pivot point b.Fixed point c.Differential scaling d.Uniform scaling
Last Answer : b.Fixed point
Description : Which of this is compulsory for 2D reflection? a.Reflection plane. b.Origin c.Reflection axis d.Co-ordinate axis.
Last Answer : c.Reflection axis
Description : The truss element can resist only a.surface force b.axial force c.point load d.none of the above
Last Answer : b.axial force
Description : The original coordinates of the point in polar coordinates are a.X’=r cos (Ф +ϴ) and Y’=r cos (Ф +ϴ) b.X’=r cos (Ф +ϴ) and Y’=r sin (Ф +ϴ) c.X’=r cos (Ф -ϴ) and Y’=r cos (Ф -ϴ) d.X’=r cos (Ф +ϴ) and Y’=r sin (Ф -ϴ)
Last Answer : b.X’=r cos (Ф +ϴ) and Y’=r sin (Ф +ϴ)
Description : The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the ... b.N010 GO3 X10 Y10 X5 Y5 R5 c.N010 GO1 X5 Y5 X10 Y10 R5 d.N010 GO2 X5 Y5 X10 Y10 R5
Last Answer : a.N010 GO2 X10 Y10 X5 Y5 R5
Description : If point are expressed in homogeneous coordinates then the pair of (x, y) isrepresented as a.(x’, y’, z’) b.(x, y, z) c.(x’, y’, w’) d.(x’, y’, w)
Last Answer : d.(x’, y’, w)
Description : Which one of the following is not Extrusion-Based RP Systems? a.Fused Deposition Modelling (FDM) b.3D Printing c.Sheet Lamination (Laminated Object Manufacturing (LOM)) d.Electron Beam melting (EBM)
Last Answer : d.Electron Beam melting (EBM)
Description : Which one of the following RP technologies uses solid sheet stock as the starting material? a.Droplet deposition manufacturing b.Fused-deposition modeling c.Laminated-Object Manufacturing d.Selective Laser Sintering
Last Answer : c.Laminated-Object Manufacturing
Description : In the context of rapid prototyping and additive manufacturing, tessellation refers to theprocess of slicing the CAD model of the part into layers. a.Droplet Deposition Manufacturing b.Used-Deposition Modeling c.Laminated-Object Manufacturing d.Stereolithography
Last Answer : d.Stereolithography
Description : In laminated object manufacturing (LOM), which of the following cutting strategy ispreferable? a.Directional scanning b.Zigzag tool paths c.Contouring and spiral paths d.Boundary cutting tool paths
Last Answer : d.Boundary cutting tool paths
Description : STL consists of an unordered list of _______ facets representing the outside skin of an object. a.linear b.triangular c.square d.hexagonal
Last Answer : b.triangular
Description : Which of the following is not Powder-Based RP system? a.Selective Laser Sintering (SLS) b.Solid Object Ultraviolet-Laser Printer (SOUP) c.Electron Beam Melting (EBM) d.Direct Metal Deposition (DMD)
Last Answer : b.Solid Object Ultraviolet-Laser Printer (SOUP)
Description : Laminated Object Manufacturing (LOM) is developed by_______ a.Stratasys b.CAM-LEM c.Kira Corporation d.Cubic Technologies
Last Answer : d.Cubic Technologies
Description : Which of the following is not Solid-based RP system? a.Laminated Object Manufacturing (LOM) b.Paper Lamination Technology (PLT) c.Electron Beam Melting (EBM) d.Fused Deposition Modeling (FDM)
Last Answer : c.Electron Beam Melting (EBM)
Description : Which of the following is not Liquid-based RP system? a.Stereolithography Apparatus (SLA) b.Laminated Object Manufacturing (LOM) c.Solid Ground Curing (SGC) d.Solid Object Ultraviolet-Laser Printer (SOUP
Last Answer : b.Laminated Object Manufacturing (LOM)
Description : In the ___________ process, one starts with a single block of solid material larger than the finalsize of the desired object and material is removed until the desired shape is reached. a.Subtractive process b.Additive process c.Formative process d.All of above
Last Answer : a.Subtractive process
Description : ________ command gives an array of object in 3D modeling a.Extrude b.Revolve c.Pattern d.All of the above
Last Answer : c.Pattern
Description : Which of the following uses a number of two-dimensional profiles for generating athree-dimensional object? a.Tweaking b.Lofting c.Filleting d.none of the above
Last Answer : b.Lofting
Description : The object space or the space in which the application model is defined is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window
Last Answer : a.World co-ordinate system
Description : Reversing the order in which a sequence of transformations is performed may affect thetransformed position of an object. a.TRUE b.FALSE c. d.
Last Answer : a.TRUE
Description : If the value of Sx=1 and Sy=1 then a.Reduce the size of object b.Distort the picture c.Produce an enlargement d.No change in the size of an object
Last Answer : d.No change in the size of an object
Description : If the scaling factors values Sx and Sy < 1 then a.It reduces the size of object b.It increases the size of object c.It stunts the shape of an object d.None
Last Answer : a.It reduces the size of object
Description : A translation is applied to an object by D a.Repositioning it along with straight line path b.Repositioning it along with circular path c.Only b d.All of the mentioned
Last Answer : a.Repositioning it along with straight line path