Drawing of number of copies of the same image in rows and columns acrossthe interface window so that they cover the entire window is called a.Roaming b.Panning c.Zooming d.Tiling

Drawing of number of copies of the same image in rows and columns acrossthe interface window so that they cover the entire window is called a.Roaming b.Panning c.Zooming d.Tiling
by

1 Answer

Answer :

d.Tiling
by

Related questions

The window opened on the raster graphics screen in which the image will bedisplayed is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Description : The window opened on the raster graphics screen in which the image will bedisplayed is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Last Answer : d.Interface window

What is the name of the space in which the image is displayed? a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Description : What is the name of the space in which the image is displayed? a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Last Answer : b.Screen co-ordinate system

Panning is a technique in which users can change the size of the area to beviewed in order to see more detail or less detail. a.TRUE b.FALSE c. d.

Description : Panning is a technique in which users can change the size of the area to beviewed in order to see more detail or less detail. a.TRUE b.FALSE c. d.

Last Answer : b.FALSE

A segment is any object described by GKS commands and data that start with CREATE SEGMENT and Terminates with CLOSE SEGMENT command. What functions can be performed on these segments? (1) Translation and Rotation (2) Panning and Zooming (3) Scaling and Shearing (4) Translation, Rotation, Panning and Zooming

Description : A segment is any object described by GKS commands and data that start with CREATE SEGMENT and Terminates with CLOSE SEGMENT command. What functions can be performed on these segments? (1) Translation ... 2) Panning and Zooming (3) Scaling and Shearing (4) Translation, Rotation, Panning and Zooming

Last Answer : Translation, Rotation, Panning and Zooming

The object space or the space in which the application model is defined is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Description : The object space or the space in which the application model is defined is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Last Answer : a.World co-ordinate system

What is the rectangle in the world defining the region that is to be displayed? a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Description : What is the rectangle in the world defining the region that is to be displayed? a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Last Answer : c.World window

STL files contains ______ a.mass properties of the model b.geometrical data c.drawing data d.all of the above

Description : STL files contains ______ a.mass properties of the model b.geometrical data c.drawing data d.all of the above

Last Answer : b.geometrical data

A cylinder can be created by drawing a rectangular shape using the ________ tool. a.revolve b.sweep c.extrude d.all of the above

Description : A cylinder can be created by drawing a rectangular shape using the ________ tool. a.revolve b.sweep c.extrude d.all of the above

Last Answer : a.revolve

Which of the following is NOT true?Image formed by reflection through a plane mirror is a.of same size b.same orientation c.is at same distance from the mirror d.virtual

Description : Which of the following is NOT true?Image formed by reflection through a plane mirror is a.of same size b.same orientation c.is at same distance from the mirror d.virtual

Last Answer : b.same orientation

The points in the entire structure are defined using the coordinates system is known as a.local coordinates system b.natural coordinates system c.global coordinate system d.none of the above

Description : The points in the entire structure are defined using the coordinates system is known as a.local coordinates system b.natural coordinates system c.global coordinate system d.none of the above

Last Answer : c.global coordinate system

In a relational database, this is a data structure that organizes the information about a single topic into rows and columns. 1) Block 2) Record 3) Tuple 4) Table 5) Command line interface

Description : In a relational database, this is a data structure that organizes the information about a single topic into rows and columns. 1) Block 2) Record 3) Tuple 4) Table 5) Command line interface

Last Answer : Answer :4

An area on a display device to which a window is mapped is called a…………. a.Window b.Viewpoint c.Pixel d.None of the above

Description : An area on a display device to which a window is mapped is called a…………. a.Window b.Viewpoint c.Pixel d.None of the above

Last Answer : b.Viewpoint

The process of mapping a world window in World Coordinates to the Viewportis called Viewing transformation. a.TRUE b.FALSE c. d.

Description : The process of mapping a world window in World Coordinates to the Viewportis called Viewing transformation. a.TRUE b.FALSE c. d.

Last Answer : a.TRUE

By changing the dimensions of the viewport, the and ofthe objects being displayed can be manipulated. a.Number of pixels and image quality b.X co-ordinate and Y co-ordinate c.Size and proportions d.All of these

Description : By changing the dimensions of the viewport, the and ofthe objects being displayed can be manipulated. a.Number of pixels and image quality b.X co-ordinate and Y co-ordinate c.Size and proportions d.All of these

Last Answer : c.Size and proportions

In a CAD package, mirror image of a 2D point P (5, 10) is to be obtained about a line whichpasses through the origin and makes an angle of 45° counterclockwise with the X-axis. The coordinates of the transformed point will be a.(7.5, 5) b.(10, 5) c.(7.5, -5) d.(10, -5)

Description : In a CAD package, mirror image of a 2D point P (5, 10) is to be obtained about a line whichpasses through the origin and makes an angle of 45° counterclockwise with the X-axis. The coordinates of the transformed point will be a.(7.5, 5) b.(10, 5) c.(7.5, -5) d.(10, -5)

Last Answer : b.(10, 5)

If the scaling factors values sx and sy are assigned to the same value then……… a.Uniform rotation is produced b.Uniform scaling is produced c.Scaling cannot be done d.Scaling can be done or cannot be done

Description : If the scaling factors values sx and sy are assigned to the same value then……… a.Uniform rotation is produced b.Uniform scaling is produced c.Scaling cannot be done d.Scaling can be done or cannot be done

Last Answer : b.Uniform scaling is produced

The “PROJECT” operator of a relational algebra creates a new table that has always (A) More columns than columns in original table (B) More rows than original table (C) Same number of rows as the original table (D) Same number of columns as the original table

Description : The “PROJECT” operator of a relational algebra creates a new table that has always (A) More columns than columns in original table (B) More rows than original table (C) Same number of rows as the original table (D) Same number of columns as the original table

Last Answer : (C) Same number of rows as the original table

__________ is one where mechanical forces or restricting forms are applied on a material so asto form it into the desired shape a.Subtractive process b.Additive process c.Formative process d.All of above

Description : __________ is one where mechanical forces or restricting forms are applied on a material so asto form it into the desired shape a.Subtractive process b.Additive process c.Formative process d.All of above

Last Answer : c.Formative process

Numerical control a.applies only to milling machines b.is a method for producing exact number of parts per hour c.is a method for controlling by means of set of instructions d.None of the mentioned

Description : Numerical control a.applies only to milling machines b.is a method for producing exact number of parts per hour c.is a method for controlling by means of set of instructions d.None of the mentioned

Last Answer : c.is a method for controlling by means of set of instructions

The minimum number of dimensions are required to define the position of a point in spaceis . a.3 b.4 c.1 d.2

Description : The minimum number of dimensions are required to define the position of a point in spaceis . a.3 b.4 c.1 d.2

Last Answer : a.3

Number of displacement polynomials used for an element depends on . a.nature of element b.type of an element c.degrees of freedom d.nodes

Description : Number of displacement polynomials used for an element depends on . a.nature of element b.type of an element c.degrees of freedom d.nodes

Last Answer : c.degrees of freedom

The art of subdividing the structure into a convenient number of smaller elements is knownas a.discretization b.assemblage c.continuum d.traction

Description : The art of subdividing the structure into a convenient number of smaller elements is knownas a.discretization b.assemblage c.continuum d.traction

Last Answer : a.discretization

The degree of the curve is independent of the number of control points in _____ a.Hermite cubic spline curve b.Bezier curve c.B-spline curve d.Hyperbola

Description : The degree of the curve is independent of the number of control points in _____ a.Hermite cubic spline curve b.Bezier curve c.B-spline curve d.Hyperbola

Last Answer : c.B-spline curve

In Beizer Curve, the flexibility of the shape would increase with _______ of the polygon. a.decrease in the number of vertices b.increase in the number of vertices c.decrease in control points d.none of the above

Description : In Beizer Curve, the flexibility of the shape would increase with _______ of the polygon. a.decrease in the number of vertices b.increase in the number of vertices c.decrease in control points d.none of the above

Last Answer : b.increase in the number of vertices

Which of the following uses a number of two-dimensional profiles for generating athree-dimensional object? a.Tweaking b.Lofting c.Filleting d.none of the above

Description : Which of the following uses a number of two-dimensional profiles for generating athree-dimensional object? a.Tweaking b.Lofting c.Filleting d.none of the above

Last Answer : b.Lofting

The degree of the curve is independent of the number of control points in . a.Hermite cubic spline curve b.Bezier curve c.B-spline curve d.Hyperbola

Description : The degree of the curve is independent of the number of control points in . a.Hermite cubic spline curve b.Bezier curve c.B-spline curve d.Hyperbola

Last Answer : c.B-spline curve

The number of control points can be added orsubtracted in . a.Bezier curve b.B-spline curve c.Cubic spline curve d.all of the above

Description : The number of control points can be added orsubtracted in . a.Bezier curve b.B-spline curve c.Cubic spline curve d.all of the above

Last Answer : b.B-spline curve

In Beizer Curve, the flexibility of the shape would increase with a.decrease in the number of vertices b.increase in the number of vertices c.decrease in control points d.none of the above

Description : In Beizer Curve, the flexibility of the shape would increase with a.decrease in the number of vertices b.increase in the number of vertices c.decrease in control points d.none of the above

Last Answer : b.increase in the number of vertices

The number of non-coincidental points required to define the simplest surface are a.4 b.3 c.2 d.5

Description : The number of non-coincidental points required to define the simplest surface are a.4 b.3 c.2 d.5

Last Answer : b.3

The number of tangents required to describe cubic splines is a.2 b.1 c.3 d.4

Description : The number of tangents required to describe cubic splines is a.2 b.1 c.3 d.4

Last Answer : b.1

STL files plague several problems as they contain no _______ data a.geographical b.analytical c.topological d.all of the above

Description : STL files plague several problems as they contain no _______ data a.geographical b.analytical c.topological d.all of the above

Last Answer : c.topological

……… is the origin of the coordinate system which is defined by manufacturer they cannotbe changed a.Blocking Point b.machine Zero Point c.Start Point d.Program Zero point

Description : ……… is the origin of the coordinate system which is defined by manufacturer they cannotbe changed a.Blocking Point b.machine Zero Point c.Start Point d.Program Zero point

Last Answer : b.machine Zero Point

If the production is done according to change in various product design easily then suchmanufacturing system is called as flexible system. a.TRUE b.FALSE c.D d.

Description : If the production is done according to change in various product design easily then suchmanufacturing system is called as flexible system. a.TRUE b.FALSE c.D d.

Last Answer : b.FALSE

A computer model of a part design on a CAD system is called which of the following? a.Computer Prototype b.Geometric Prototype c.Solid Prototype d.Virtual Prototype

Description : A computer model of a part design on a CAD system is called which of the following? a.Computer Prototype b.Geometric Prototype c.Solid Prototype d.Virtual Prototype

Last Answer : d.Virtual Prototype

The machine tool, in which calculation and setting of the operating conditions like depth ofcut, feed, speed are done during the machining by the control system itself, is called a.Computer Numerical Control System b.Direct Numerical Control System c.Machining Center System d.Adaptive Control System

Description : The machine tool, in which calculation and setting of the operating conditions like depth ofcut, feed, speed are done during the machining by the control system itself, is called a.Computer Numerical Control System b.Direct Numerical Control System c.Machining Center System d.Adaptive Control System

Last Answer : d.Adaptive Control System

Repetitive CNC machine operations conveniently performing and execute with onecommand instead of programming of series of individual move called ….. a.Common Cycle b.Incremental Programming c.Canned Cycle d.None of the above

Description : Repetitive CNC machine operations conveniently performing and execute with onecommand instead of programming of series of individual move called ….. a.Common Cycle b.Incremental Programming c.Canned Cycle d.None of the above

Last Answer : c.Canned Cycle

……… are also called as parametric subroutines a.Micro b.Macro c.Sub Macro d.Sub Micro

Description : ……… are also called as parametric subroutines a.Micro b.Macro c.Sub Macro d.Sub Micro

Last Answer : b.Macro

Each coded instruction in a set of instructions is called as…… a.Words b.Alphabet c.Numbers d.Format

Description : Each coded instruction in a set of instructions is called as…… a.Words b.Alphabet c.Numbers d.Format

Last Answer : a.Words

An absolute NC system is one in which all position coordinates are referred to one fixedorigin called the zero point. a.TRUE b.FALSE c. d.

Description : An absolute NC system is one in which all position coordinates are referred to one fixedorigin called the zero point. a.TRUE b.FALSE c. d.

Last Answer : a.TRUE

he depth that the tool is plunged into the surface is called as a.feed b.depth of cut c.depth of tool d.working depth

Description : he depth that the tool is plunged into the surface is called as a.feed b.depth of cut c.depth of tool d.working depth

Last Answer : b.depth of cut

The process of copying data from a memory location is called a.reading b.writing c.controlling d.hand shaking

Description : The process of copying data from a memory location is called a.reading b.writing c.controlling d.hand shaking

Last Answer : a.reading

The process of putting data into a storage location is called a.reading b.writing c.controlling d.hand shaking

Description : The process of putting data into a storage location is called a.reading b.writing c.controlling d.hand shaking

Last Answer : b.writing

When a thin plate is subjected to loading in its own plane only, the condition is called _ a.plane stress b.plane strain c.zero stress d.zero strain

Description : When a thin plate is subjected to loading in its own plane only, the condition is called _ a.plane stress b.plane strain c.zero stress d.zero strain

Last Answer : a.plane stress

The nature of loading at various locations and other surfaces conditions called a.friction b.traction c.boundary condition d.surfacing

Description : The nature of loading at various locations and other surfaces conditions called a.friction b.traction c.boundary condition d.surfacing

Last Answer : c.boundary condition

In FEA, the sub domains are called as . a.particles b.molecules c.elements d.none

Description : In FEA, the sub domains are called as . a.particles b.molecules c.elements d.none

Last Answer : c.elements

From the following, which method is also called as the Building Block Approach? a.Cellular Decomposition b.Spatial Occupancy Enumeration c.Generalized Sweeps d.Constructive Solid Geometry

Description : From the following, which method is also called as the Building Block Approach? a.Cellular Decomposition b.Spatial Occupancy Enumeration c.Generalized Sweeps d.Constructive Solid Geometry

Last Answer : d.Constructive Solid Geometry

Any convenient co-ordinate system or Cartesian co-ordinates which can be usedto define the picture is called a.spherical co-ordinates b.vector co-ordinates c.viewport co-ordinates d.world co-ordinates

Description : Any convenient co-ordinate system or Cartesian co-ordinates which can be usedto define the picture is called a.spherical co-ordinates b.vector co-ordinates c.viewport co-ordinates d.world co-ordinates

Last Answer : d.world co-ordinates

The translation distances (dx, dy) is called as a.Translation vector b.Shift vector c.Both a and b d.Neither a nor b

Description : The translation distances (dx, dy) is called as a.Translation vector b.Shift vector c.Both a and b d.Neither a nor b

Last Answer : c.Both a and b

When every entity of a geometric model remains parallel to its initial position, thetransformation is called as a.User Coordinate System b.World Coordinate System c.Screen Coordinate System d.None of the above

Description : When every entity of a geometric model remains parallel to its initial position, thetransformation is called as a.User Coordinate System b.World Coordinate System c.Screen Coordinate System d.None of the above

Last Answer : b.World Coordinate System

The number of tuples in a relation is called its …………. While the number of attributes in a relation is called it’s ……………….. A) Degree, Cardinality B) Cardinality, Degree C) Rows, Columns

Description : The number of tuples in a relation is called its …………. While the number of attributes in a relation is called it’s ……………….. A) Degree, Cardinality B) Cardinality, Degree C) Rows, Columns

Last Answer : B) Cardinality, Degree