Description : When a smooth curve is approximated through the data points, then the curve is knownas a.approximation curve b.pitch curve c.data curve d.interpolant curve
Last Answer : a.approximation curve
Description : To solve the FEM problem, it subdivides a large problem into smaller, simpler parts that arecalled a.static elements b.dynamic elements c.infinite elements d.finite elements
Last Answer : d.finite elements
Description : The nature of loading at various locations and other surfaces conditions called a.friction b.traction c.boundary condition d.surfacing
Last Answer : c.boundary condition
Description : What type of inner structure can be used to reduce the printing time of the model in RP? a.Higher resolution b.Smaller polygons c.Lower resolution d.None of the above
Last Answer : c.Lower resolution
Description : Any convenient co-ordinate system or Cartesian co-ordinates which can be usedto define the picture is called a.spherical co-ordinates b.vector co-ordinates c.viewport co-ordinates d.world co-ordinates
Last Answer : d.world co-ordinates
Description : If the structure is more complex in order to simplify the model, we need to subdividethe structure into substructures. These substructures are termed as . a.elements b.modules c.links d.models
Last Answer : b.modules
Description : For 1-D bar elements if the structure is having 3 nodes then the stiffness matrix formed ishaving an order of a.2*2 b.3*3 c.4*4 d.6*6
Last Answer : b.3*3
Description : The parabola is defined mathematically as a curve generated by a point that moves suchthat its distance from the focus is always__________the distance to the directrix a.larger than b.smaller than c.equal to d.none of the above
Last Answer : c.equal to
Description : In Opitz system, 2nd digit indicates a.Type and Shape b.External shape and external shape elements c.External plane surface finishing d.Auxiliary hole and gear teeth
Last Answer : b.External shape and external shape elements
Description : If the size of the elements is small, the final solution is expected to be accurate. a.more b.less c.depends on other factors d.can't say
Last Answer : a.more
Description : In FEA, the sub domains are called as . a.particles b.molecules c.elements d.none
Last Answer : c.elements
Description : For truss analysis, which type of elements is used? a.Triangle b.Parallelogram c.Rectangle d.Bar
Last Answer : d.Bar
Description : Reflection about the line y=0, the axis, is accomplished with the transformationmatrix with how many elements as ‘0’? a.8 b.9 c.4 d.6
Last Answer : d.6
Description : If a ‘3 x 3’ matrix shears in Y direction, how many elements of it are ‘0’? a.2 b.3 c.6 d.5
Last Answer : d.5
Description : If a ‘3 x 3’ matrix shears in X direction, how many elements of it are ‘1’? a.2 b.3 c.6 d.5
Last Answer : b.3
Description : Chain type coding structure is also known as________ a.Poly code b.Mono code c.Hybrid code d.Miscellaneous code
Last Answer : a.Poly code
Description : From the following in which type of GT code tree-type structure is used? a.Poly code b.Hybrid code c.Mono code d.None of the above
Last Answer : c.Mono code
Description : From the following in which type of GT code chain-type structure is used? a.Poly code b.Hybrid code c.Mono code d.None of the above
Description : _____ is area of engineering and science which understand the different principles, structure andprogramming of robot a.Mechatronics b.Robotics c.Aeronautics d.None of the above
Last Answer : b.Robotics
Description : What type of inner structure makes the smoothest model in RP? a.Higher resolution b.Larger polygons c.Lower resolution d.None of the above
Last Answer : a.Higher resolution
Description : The points in the entire structure are defined using the coordinates system is known as a.local coordinates system b.natural coordinates system c.global coordinate system d.none of the above
Last Answer : c.global coordinate system
Description : From the following which is the step of machine cell design? a.Divide parts into part families b.Select type of machine cell c.Prepare a composite part d.All of the above
Last Answer : d.All of the above
Description : Which of the following are problems with the current rapid prototyping and additivemanufacturing technologies? a.Limited material variety b.Inability to convert a solid part into layers c.Poor machinability of the starting material d.The inability of the designer to design the part
Last Answer : a.Limited material variety
Description : In the context of rapid prototyping and additive manufacturing, tessellation refers to theprocess of slicing the CAD model of the part into layers. a.Droplet Deposition Manufacturing b.Used-Deposition Modeling c.Laminated-Object Manufacturing d.Stereolithography
Last Answer : d.Stereolithography
Description : Which file format cannot be converted into STL file format? a..prt b..sld c..dwg d..stp
Last Answer : c..dwg
Description : __________ is one where mechanical forces or restricting forms are applied on a material so asto form it into the desired shape a.Subtractive process b.Additive process c.Formative process d.All of above
Last Answer : c.Formative process
Description : he depth that the tool is plunged into the surface is called as a.feed b.depth of cut c.depth of tool d.working depth
Last Answer : b.depth of cut
Description : The process of putting data into a storage location is called a.reading b.writing c.controlling d.hand shaking
Last Answer : b.writing
Description : We can combine the multiplicative and translational terms for 2D into a singlematrix representation by expanding a.2 x 2 matrix into 4x4 matrix b.2 x 2 matrix into 3 x 3 c.3 x 3 matrix into 2 x 2 d.Only c
Last Answer : b.2 x 2 matrix into 3 x 3
Description : Numerical control a.applies only to milling machines b.is a method for producing exact number of parts per hour c.is a method for controlling by means of set of instructions d.None of the mentioned
Last Answer : c.is a method for controlling by means of set of instructions
Description : The minimum number of dimensions are required to define the position of a point in spaceis . a.3 b.4 c.1 d.2
Last Answer : a.3
Description : Number of displacement polynomials used for an element depends on . a.nature of element b.type of an element c.degrees of freedom d.nodes
Last Answer : c.degrees of freedom
Description : The degree of the curve is independent of the number of control points in _____ a.Hermite cubic spline curve b.Bezier curve c.B-spline curve d.Hyperbola
Last Answer : c.B-spline curve
Description : In Beizer Curve, the flexibility of the shape would increase with _______ of the polygon. a.decrease in the number of vertices b.increase in the number of vertices c.decrease in control points d.none of the above
Last Answer : b.increase in the number of vertices
Description : Which of the following uses a number of two-dimensional profiles for generating athree-dimensional object? a.Tweaking b.Lofting c.Filleting d.none of the above
Last Answer : b.Lofting
Description : The degree of the curve is independent of the number of control points in . a.Hermite cubic spline curve b.Bezier curve c.B-spline curve d.Hyperbola
Description : The number of control points can be added orsubtracted in . a.Bezier curve b.B-spline curve c.Cubic spline curve d.all of the above
Last Answer : b.B-spline curve
Description : In Beizer Curve, the flexibility of the shape would increase with a.decrease in the number of vertices b.increase in the number of vertices c.decrease in control points d.none of the above
Description : The number of non-coincidental points required to define the simplest surface are a.4 b.3 c.2 d.5
Description : The number of tangents required to describe cubic splines is a.2 b.1 c.3 d.4
Last Answer : b.1
Description : By changing the dimensions of the viewport, the and ofthe objects being displayed can be manipulated. a.Number of pixels and image quality b.X co-ordinate and Y co-ordinate c.Size and proportions d.All of these
Last Answer : c.Size and proportions
Description : Drawing of number of copies of the same image in rows and columns acrossthe interface window so that they cover the entire window is called a.Roaming b.Panning c.Zooming d.Tiling
Last Answer : d.Tiling
Description : Which one of the following statements is TRUE? a.Teach pendant is used for lead-through teaching. b.Teach pendant is used for manual teaching. c.Teach pendant is used for off-line teaching of robots. d.Teach pendant is not used in robot teaching.
Last Answer : b.Teach pendant is used for manual teaching.
Description : A company is producing 15000 mobiles annually. Determine production scale of company a.Low Production b.Medium Production c.High Production d.None
Last Answer : c.High Production
Description : --------is a manufacturing system in which sequence of operation is fixed by equipmentconfiguration a.Flexible b.Programmable c.Fixed d.All of above
Last Answer : c.Fixed
Description : Which manufacturing system is best suited for batch production a.Flexible b.Programmable c.Fixed d.All of above
Last Answer : b.Programmable
Description : Which automation is suited for high production quantities a.Flexible b.Programmable c.Fixed d.All of above
Description : A use computer to automatically generate process plans is? a.Lower-level strategies b.Intermediate strategies c.Higher-level strategies d.Morden-level strategies
Last Answer : c.Higher-level strategies
Description : Use computers for storage and retrieval of the data for the process plans are? a.Lower-level strategies b.Intermediate strategies c.Higher-level strategies d.Morden-level strategies
Last Answer : a.Lower-level strategies
Description : Digit 5 in Opitz system is for_________ a.Part class b.Main shape c.Additional holes, teeth and forming d.Plane surface machining
Last Answer : c.Additional holes, teeth and forming