The nature of loading at various locations and other surfaces conditions called a.friction b.traction c.boundary condition d.surfacing

The nature of loading at various locations and other surfaces conditions called a.friction b.traction c.boundary condition d.surfacing
by

1 Answer

Answer :

c.boundary condition
by

Related questions

From below, choose the condition for the axisymmetric element. a.Symmetric about axis b.Boundary conditions are symmetric about an axis c.Loading conditions are symmetric about an axis d.All the above

Description : From below, choose the condition for the axisymmetric element. a.Symmetric about axis b.Boundary conditions are symmetric about an axis c.Loading conditions are symmetric about an axis d.All the above

Last Answer : d.All the above

When a thin plate is subjected to loading in its own plane only, the condition is called _ a.plane stress b.plane strain c.zero stress d.zero strain

Description : When a thin plate is subjected to loading in its own plane only, the condition is called _ a.plane stress b.plane strain c.zero stress d.zero strain

Last Answer : a.plane stress

The art of subdividing the structure into a convenient number of smaller elements is knownas a.discretization b.assemblage c.continuum d.traction

Description : The art of subdividing the structure into a convenient number of smaller elements is knownas a.discretization b.assemblage c.continuum d.traction

Last Answer : a.discretization

STL file converts curved surfaces into_______ a.Polygons b.Lines c.Surfaces d.None of the above

Description : STL file converts curved surfaces into_______ a.Polygons b.Lines c.Surfaces d.None of the above

Last Answer : a.Polygons

The tensor product technique constraints surfaces by two curves. a.2 b.1 c.3 d.4

Description : The tensor product technique constraints surfaces by two curves. a.2 b.1 c.3 d.4

Last Answer : b.1

From the following which is not the application of AGV. a.Truck loading and unloading b.To change the tool c.Material transfer d.Paper roll transfer

Description : From the following which is not the application of AGV. a.Truck loading and unloading b.To change the tool c.Material transfer d.Paper roll transfer

Last Answer : b.To change the tool

In laminated object manufacturing (LOM), which of the following cutting strategy ispreferable? a.Directional scanning b.Zigzag tool paths c.Contouring and spiral paths d.Boundary cutting tool paths

Description : In laminated object manufacturing (LOM), which of the following cutting strategy ispreferable? a.Directional scanning b.Zigzag tool paths c.Contouring and spiral paths d.Boundary cutting tool paths

Last Answer : d.Boundary cutting tool paths

Finite element analysis deals with . a.approximate numerical solution b.non-boundary value problems c.Laplace equations d.All of the above

Description : Finite element analysis deals with . a.approximate numerical solution b.non-boundary value problems c.Laplace equations d.All of the above

Last Answer : a.approximate numerical solution

For 3D modeling of automobile body styling, which of the following is a preferredtechnique a.Constructive Solid Geometry b.Pure Primitive Instancing c.Boundary Representation d.Spatial Occupancy Enumeration

Description : For 3D modeling of automobile body styling, which of the following is a preferredtechnique a.Constructive Solid Geometry b.Pure Primitive Instancing c.Boundary Representation d.Spatial Occupancy Enumeration

Last Answer : c.Boundary Representation

For 3D modeling of automobile body styling, which of the following is a preferredtechnique? a.Constructive Solid Geometry b.Pure Primitive Instancing c.Boundary Representation d.Spatial Occupancy Enumeration

Description : For 3D modeling of automobile body styling, which of the following is a preferredtechnique? a.Constructive Solid Geometry b.Pure Primitive Instancing c.Boundary Representation d.Spatial Occupancy Enumeration

Last Answer : c.Boundary Representation

If the production is done according to change in various product design easily then suchmanufacturing system is called as flexible system. a.TRUE b.FALSE c.D d.

Description : If the production is done according to change in various product design easily then suchmanufacturing system is called as flexible system. a.TRUE b.FALSE c.D d.

Last Answer : b.FALSE

Which of the following is used as base material in Selective laser sintering (SLS)? a.Photopolymer b.Thermoplastics, Metal powders c.Titanium alloys d.Various materials

Description : Which of the following is used as base material in Selective laser sintering (SLS)? a.Photopolymer b.Thermoplastics, Metal powders c.Titanium alloys d.Various materials

Last Answer : b.Thermoplastics, Metal powders

Which of the following is used as base material in Electron Beam Melting (EBM) process? a.Titanium alloys b.Photopolymer c.Various materials d.Paper

Description : Which of the following is used as base material in Electron Beam Melting (EBM) process? a.Titanium alloys b.Photopolymer c.Various materials d.Paper

Last Answer : a.Titanium alloys

A circle is represented by center point [5,5] and radius 6 units. Find the parametricequation of circle and determine the various points on circle in first quadrant if increment in angle by 45o a.9.24,9.24 b.9.42,9.42 c.9,9 d.11,5

Description : A circle is represented by center point [5,5] and radius 6 units. Find the parametricequation of circle and determine the various points on circle in first quadrant if increment in angle by 45o a.9.24,9.24 b.9.42,9.42 c.9,9 d.11,5

Last Answer : a.9.24,9.24

Number of displacement polynomials used for an element depends on . a.nature of element b.type of an element c.degrees of freedom d.nodes

Description : Number of displacement polynomials used for an element depends on . a.nature of element b.type of an element c.degrees of freedom d.nodes

Last Answer : c.degrees of freedom

The machine tool, in which calculation and setting of the operating conditions like depth ofcut, feed, speed are done during the machining by the control system itself, is called a.Computer Numerical Control System b.Direct Numerical Control System c.Machining Center System d.Adaptive Control System

Description : The machine tool, in which calculation and setting of the operating conditions like depth ofcut, feed, speed are done during the machining by the control system itself, is called a.Computer Numerical Control System b.Direct Numerical Control System c.Machining Center System d.Adaptive Control System

Last Answer : d.Adaptive Control System

Dynamic friction as compared to static friction is (A) Same (B) More (C) Less (D) May be less of more depending on nature of surfaces and velocity

Description : Dynamic friction as compared to static friction is  (A) Same  (B) More  (C) Less  (D) May be less of more depending on nature of surfaces and velocity 

Last Answer : (C) Less 

The coefficient of friction depends upon (A) Nature of surfaces (B) Area of contact (C) Shape of the surfaces (D) All of the above

Description : The coefficient of friction depends upon (A) Nature of surfaces (B) Area of contact (C) Shape of the surfaces (D) All of the above

Last Answer : (A) Nature of surfaces

The coefficient of friction depends on (A) Area of contact (B) Shape of surfaces (C) Strength of surfaces (D) Nature of surface

Description : The coefficient of friction depends on (A) Area of contact (B) Shape of surfaces (C) Strength of surfaces (D) Nature of surface

Last Answer : (D) Nature of surface

Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of the free body c.If static friction is acting, the value of the friction force may vary from zero to its maximum value d.The force of friction is always normal to the surface e.All of the above

Description : Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of ... its maximum value d.The force of friction is always normal to the surface e.All of the above

Last Answer : d. The force of friction is always normal to the surface

Coulomb friction is a.Friction between solids and liquids b.Friction between electrically charged bodies c.Friction between lubricated surface d.Friction between dry surfaces e.Friction between bodies having relative motion

Description : Coulomb friction is a.Friction between solids and liquids b.Friction between electrically charged bodies c.Friction between lubricated surface d.Friction between dry surfaces e.Friction between bodies having relative motion

Last Answer : d. Friction between dry surfaces

Incorrect statement for co-efficient of friction could be that A. The coefficient of friction is denoted by the Greek letter µ. B. The coefficient of friction is directly proportional to the force of friction C. The coefficient of friction is constant even in the conditions of fast slipping and high contact pressure D. The coefficient of friction is inversely proportional to the force pressing the surfaces together

Description : Incorrect statement for co-efficient of friction could be that A. The coefficient of friction is denoted by the Greek letter µ. B. The coefficient of friction is directly proportional to ... D. The coefficient of friction is inversely proportional to the force pressing the surfaces together

Last Answer : The coefficient of friction is constant even in the conditions of fast slipping and high contact pressure

Which one of the following surfaces will give highest coefficient of traction while using crawler track tractors? (A) Ice (B) Concrete (C) Loose sand (D) Earth

Description : Which one of the following surfaces will give highest coefficient of traction while using crawler track tractors? (A) Ice (B) Concrete (C) Loose sand (D) Earth

Last Answer : (D) Earth

Electronic Stability Program is use to a) Assist in braking b) Reducing loss of traction c) Use in ECU d) for proper loading and unloading of weight in vehicle

Description : Electronic Stability Program is use to a) Assist in braking b) Reducing loss of traction c) Use in ECU d) for proper loading and unloading of weight in vehicle

Last Answer : b) Reducing loss of traction

In “Product Life Cycle” a stage in which buyers move on to other products and salesdrop is known as_____. a.Growth stage b.Introduction stage c.Mature stage d.Decline stage

Description : In “Product Life Cycle” a stage in which buyers move on to other products and salesdrop is known as_____. a.Growth stage b.Introduction stage c.Mature stage d.Decline stage

Last Answer : d.Decline stage

In CNC systems multiple microprocessors and programmable logic controllers work a.in parallel b.in series c.one after the other d.for 80% of the total machining time

Description : In CNC systems multiple microprocessors and programmable logic controllers work a.in parallel b.in series c.one after the other d.for 80% of the total machining time

Last Answer : a.in parallel

If the size of the elements is small, the final solution is expected to be accurate. a.more b.less c.depends on other factors d.can't say

Description : If the size of the elements is small, the final solution is expected to be accurate. a.more b.less c.depends on other factors d.can't say

Last Answer : a.more

The characteristic of the shape function is a.the shape function has a unit value at one nodal point and zero value at the other nodes b.the sum of the shape function is equal to one c.both a & b d.None of the above

Description : The characteristic of the shape function is a.the shape function has a unit value at one nodal point and zero value at the other nodes b.the sum of the shape function is equal to one c.both a & b d.None of the above

Last Answer : c.both a & b

Which transformation distorts the shape of an object such that the transformed shapeappears as if the object were composed of internal layers that had been caused to slide over each other? a.Rotation b.Scaling up c.Scaling down d.Shearing

Description : Which transformation distorts the shape of an object such that the transformed shapeappears as if the object were composed of internal layers that had been caused to slide over each other? a.Rotation b.Scaling up c.Scaling down d.Shearing

Last Answer : d.Shearing

A computer model of a part design on a CAD system is called which of the following? a.Computer Prototype b.Geometric Prototype c.Solid Prototype d.Virtual Prototype

Description : A computer model of a part design on a CAD system is called which of the following? a.Computer Prototype b.Geometric Prototype c.Solid Prototype d.Virtual Prototype

Last Answer : d.Virtual Prototype

Repetitive CNC machine operations conveniently performing and execute with onecommand instead of programming of series of individual move called ….. a.Common Cycle b.Incremental Programming c.Canned Cycle d.None of the above

Description : Repetitive CNC machine operations conveniently performing and execute with onecommand instead of programming of series of individual move called ….. a.Common Cycle b.Incremental Programming c.Canned Cycle d.None of the above

Last Answer : c.Canned Cycle

……… are also called as parametric subroutines a.Micro b.Macro c.Sub Macro d.Sub Micro

Description : ……… are also called as parametric subroutines a.Micro b.Macro c.Sub Macro d.Sub Micro

Last Answer : b.Macro

Each coded instruction in a set of instructions is called as…… a.Words b.Alphabet c.Numbers d.Format

Description : Each coded instruction in a set of instructions is called as…… a.Words b.Alphabet c.Numbers d.Format

Last Answer : a.Words

An absolute NC system is one in which all position coordinates are referred to one fixedorigin called the zero point. a.TRUE b.FALSE c. d.

Description : An absolute NC system is one in which all position coordinates are referred to one fixedorigin called the zero point. a.TRUE b.FALSE c. d.

Last Answer : a.TRUE

he depth that the tool is plunged into the surface is called as a.feed b.depth of cut c.depth of tool d.working depth

Description : he depth that the tool is plunged into the surface is called as a.feed b.depth of cut c.depth of tool d.working depth

Last Answer : b.depth of cut

The process of copying data from a memory location is called a.reading b.writing c.controlling d.hand shaking

Description : The process of copying data from a memory location is called a.reading b.writing c.controlling d.hand shaking

Last Answer : a.reading

The process of putting data into a storage location is called a.reading b.writing c.controlling d.hand shaking

Description : The process of putting data into a storage location is called a.reading b.writing c.controlling d.hand shaking

Last Answer : b.writing

In FEA, the sub domains are called as . a.particles b.molecules c.elements d.none

Description : In FEA, the sub domains are called as . a.particles b.molecules c.elements d.none

Last Answer : c.elements

From the following, which method is also called as the Building Block Approach? a.Cellular Decomposition b.Spatial Occupancy Enumeration c.Generalized Sweeps d.Constructive Solid Geometry

Description : From the following, which method is also called as the Building Block Approach? a.Cellular Decomposition b.Spatial Occupancy Enumeration c.Generalized Sweeps d.Constructive Solid Geometry

Last Answer : d.Constructive Solid Geometry

An area on a display device to which a window is mapped is called a…………. a.Window b.Viewpoint c.Pixel d.None of the above

Description : An area on a display device to which a window is mapped is called a…………. a.Window b.Viewpoint c.Pixel d.None of the above

Last Answer : b.Viewpoint

Any convenient co-ordinate system or Cartesian co-ordinates which can be usedto define the picture is called a.spherical co-ordinates b.vector co-ordinates c.viewport co-ordinates d.world co-ordinates

Description : Any convenient co-ordinate system or Cartesian co-ordinates which can be usedto define the picture is called a.spherical co-ordinates b.vector co-ordinates c.viewport co-ordinates d.world co-ordinates

Last Answer : d.world co-ordinates

Drawing of number of copies of the same image in rows and columns acrossthe interface window so that they cover the entire window is called a.Roaming b.Panning c.Zooming d.Tiling

Description : Drawing of number of copies of the same image in rows and columns acrossthe interface window so that they cover the entire window is called a.Roaming b.Panning c.Zooming d.Tiling

Last Answer : d.Tiling

The process of mapping a world window in World Coordinates to the Viewportis called Viewing transformation. a.TRUE b.FALSE c. d.

Description : The process of mapping a world window in World Coordinates to the Viewportis called Viewing transformation. a.TRUE b.FALSE c. d.

Last Answer : a.TRUE

The window opened on the raster graphics screen in which the image will bedisplayed is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Description : The window opened on the raster graphics screen in which the image will bedisplayed is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Last Answer : d.Interface window

The object space or the space in which the application model is defined is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Description : The object space or the space in which the application model is defined is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Last Answer : a.World co-ordinate system

The translation distances (dx, dy) is called as a.Translation vector b.Shift vector c.Both a and b d.Neither a nor b

Description : The translation distances (dx, dy) is called as a.Translation vector b.Shift vector c.Both a and b d.Neither a nor b

Last Answer : c.Both a and b

When every entity of a geometric model remains parallel to its initial position, thetransformation is called as a.User Coordinate System b.World Coordinate System c.Screen Coordinate System d.None of the above

Description : When every entity of a geometric model remains parallel to its initial position, thetransformation is called as a.User Coordinate System b.World Coordinate System c.Screen Coordinate System d.None of the above

Last Answer : b.World Coordinate System

Which one of the following statements is TRUE? a.Teach pendant is used for lead-through teaching. b.Teach pendant is used for manual teaching. c.Teach pendant is used for off-line teaching of robots. d.Teach pendant is not used in robot teaching.

Description : Which one of the following statements is TRUE? a.Teach pendant is used for lead-through teaching. b.Teach pendant is used for manual teaching. c.Teach pendant is used for off-line teaching of robots. d.Teach pendant is not used in robot teaching.

Last Answer : b.Teach pendant is used for manual teaching.

A company is producing 15000 mobiles annually. Determine production scale of company a.Low Production b.Medium Production c.High Production d.None

Description : A company is producing 15000 mobiles annually. Determine production scale of company a.Low Production b.Medium Production c.High Production d.None

Last Answer : c.High Production

--------is a manufacturing system in which sequence of operation is fixed by equipmentconfiguration a.Flexible b.Programmable c.Fixed d.All of above

Description : --------is a manufacturing system in which sequence of operation is fixed by equipmentconfiguration a.Flexible b.Programmable c.Fixed d.All of above

Last Answer : c.Fixed