Description : Which of the following is the locus of a point that moves in such a manner that its distance from a fixed point is equal to its distance from a fixed line multiplied by a constant greater than one (A) Ellipse (B) Hyperbola (C) Parabola (D) Circle
Last Answer : (B) Hyperbola
Description : The graphical representation of Ohms law is a. hyperbola b. Ellipse c. parabola d. straight line
Last Answer : d. straight line
Description : Assuming constant gravity and no air resistance, the path of a cannonball fired from a cannon is: w) a semi-circle x) an ellipse y) a parabola z) a hyperbola
Last Answer : ANSWER: Y -- A PARABOLA
Description : Which of the following is not an analytical entity? a.Line b.Circle c.Spline d.Parabola
Last Answer : c.Spline
Description : The degree of the curve is independent of the number of control points in _____ a.Hermite cubic spline curve b.Bezier curve c.B-spline curve d.Hyperbola
Last Answer : c.B-spline curve
Description : The degree of the curve is independent of the number of control points in . a.Hermite cubic spline curve b.Bezier curve c.B-spline curve d.Hyperbola
Description : Which of the following is not a synthetic entity? a.Hyperbola b.Bezier curve c.B-spline curve d.Cubic spline curve
Last Answer : a.Hyperbola
Description : Mathematically, the ellipse is a curve generated by a point moving in space such that atany position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter
Last Answer : a.the major diameter
Description : Mathematically, the ellipse is a curve generated by a point moving in space such thatat any position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter
Description : An ellipse can also be rotated about its center coordinates by rotating a.End points b.Major and minor axes c.Only a d.None
Last Answer : b.Major and minor axes
Description : To change the position of a circle or ellipse we translate a.Center coordinates b.Center coordinates and redraw the figure in new location c.Outline coordinates d.All of the mentioned
Last Answer : b.Center coordinates and redraw the figure in new location
Description : The parabola is defined mathematically as a curve generated by a point that moves suchthat its distance from the focus is always__________the distance to the directrix a.larger than b.smaller than c.equal to d.none of the above
Last Answer : c.equal to
Description : Which of the following represents the plot of filtrate volume versus time for constant pressure filtration? (A) Parabola (B) Straight line (C) Hyperbola (D) Exponential curve
Last Answer : (A) Parabola
Description : Graph of p against 1⁄V is A. curve B. straight line C. parabola D. hyperbola
Last Answer : straight line
Description : Path followed by water jet issuing from the bottom of a water tank will be a (A) Parabola (vertex being at the opening) (B) Hyperbola (C) Horizontal straight line (D) Zig-zag path (which is geometrically undefined)
Last Answer : (A) Parabola (vertex being at the opening)
Description : The locus of reaction of a two hinged semi-circular arch, is (A) Straight line (B) Parabola (C) Circle (D) Hyperbola
Last Answer : (A) Straight line
Description : A cable with a uniformly distributed load per horizontal metre run will take the following shape (A) Straight line (B) Parabola (C) Hyperbola (D) Elliptical
Last Answer : (B) Parabola
Description : Isotherm on an enthalpy-concentration diagram, for an ideal solution will be a (A) Straight line (B) Sine curve (C) Parabola (D) Hyperbola
Description : To a person standing on shore, an object dropped from the mast of a passing sailboat will trace what path, assuming negligible air resistance. Is it: w) vertical straight line x) slanted straight line y) parabola z) hyperbola
Last Answer : ANSWER: Y -- PARABOLA
Description : A hot liquid is kept in a big room. The logarithm of the numerical valueof the temperature difference between the liquid and the room is plotted against time. The plot will be very nearly a/an (A) Ellipse (B) Straight line (C) Parabola (D) Circular arc
Last Answer : (B) Straight line
Description : The locus of the moment of inertia about inclined axes to the principal axis, is (A) Straight line (B) Parabola (C) Circle (D) Ellipse
Last Answer : (D) Ellipse
Description : The locus of the end point of the resultant of the normal and tangential components of the stress on an inclined plane, is (A) Circle (B) Parabola (C) Ellipse (D) Straight line
Last Answer : (C) Ellipse
Description : If there is no impervious boundary at the bottom of a hydraulic structure, stream lines tend to follow: (A) A straight line (B) A parabola (C) A semi-ellipse (D) A semi-circle
Last Answer : (C) A semi-ellipse
Description : An ellipse and a hyperbola have the same centre as origin, the same foci and the minor-axis of the one is the same as the conhugate axis of the other
Last Answer : An ellipse and a hyperbola have the same centre as origin, the same foci and the minor-axis of the one is the same ... 2)` equals A. 1 B. 2 C. 3 D. 4
Description : A heavy string attached at two ends at same horizontal level and when central dip is very small approaches the following curve (A) Catenary (B) Parabola (C) Hyperbola (D) Elliptical
Description : An ideal horizontal transition curve is a (a) Parabola (b) Circle (c) Clothoid spiral (d) Hyperbola
Last Answer : (c) Clothoid spiral
Description : The bending moment diagram for a cantilever with U.D.L. over the whole span will be (a) Triangle (b) Rectangle (c) Parabola (d) Ellipse
Last Answer : (c) Parabola
Description : Which of the following is not the method of part family formation a.Visual inspection method b.Automatic product sorting c.Parts classification & coding d.Production flow analysis
Last Answer : b.Automatic product sorting
Description : The following is basically a material flow simplification technique a.A simple and visual method of cell design b.Family formation by classification and codification c.Cell formation using Production Flow Analysis d.All of the above
Last Answer : c.Cell formation using Production Flow Analysis
Description : Which of the following technique of grouping does not consider the design and shape aspect? a.A simple and visual method of cell design b.Family formation by classification and codification c.Cell formation using Production Flow Analysis d.All of the above
Description : ____ is a collection of parts which have similar characteristics a.Part family b.Mono family c.GT family d.Poly family
Last Answer : a.Part family
Description : Which one of the following statements is TRUE? a.Teach pendant is used for lead-through teaching. b.Teach pendant is used for manual teaching. c.Teach pendant is used for off-line teaching of robots. d.Teach pendant is not used in robot teaching.
Last Answer : b.Teach pendant is used for manual teaching.
Description : Which layout is mostly used for the batch type of production? a.Product layout b.Process layout c.In line layout d.None of the above
Last Answer : b.Process layout
Description : From the following in which FMS layout workstations are arranged in a loop a.Ladder layout b.In line layout c.Loop layout d.None of the above
Last Answer : c.Loop layout
Description : From the following in which FMS layout machine tools are kept along a straight line. a.Loop layout b.In line layout c.Ladder layout d.Open field layout
Last Answer : b.In line layout
Description : From the following which is the type of FMS layout a.In line layout b.Ladder layout c.Both A &B d.None of the above
Last Answer : c.Both A &B
Description : Which layout is mostly used for batch type of production? a.Product layout b.Process layout c.In line layout d.None of the above
Description : Which one is NOT related to rapid prototyping definition? a.Layer by layer b.Physical model c.From 3D CAD data d.Production line
Last Answer : d.Production line
Description : In a CAD package, mirror image of a 2D point P (5, 10) is to be obtained about a line whichpasses through the origin and makes an angle of 45° counterclockwise with the X-axis. The coordinates of the transformed point will be a.(7.5, 5) b.(10, 5) c.(7.5, -5) d.(10, -5)
Last Answer : b.(10, 5)
Description : A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre
Last Answer : d.Line Joining Chuck centre & tail stock centre
Description : For Q 45, Tangent vector for line L2 a.i+4j-k b.2i+4j+k c.i-4j-2k d.i+4j+2k
Last Answer : d.i+4j+2k
Description : Two lines L1 and L2 having Parametric equations are P1=[3 4 7]+u[2 2 -6] and P2=[15 -2]+u[1 4 2]. Tangent vector for line L1 a.2i+2j-6k b.2i+2j+6k c.2i-2j-6k d.6-2j-2k
Last Answer : a.2i+2j-6k
Description : Find coordinates of points on line having end points P1(3,5,8) and P2 (6,4,3) at u=0.25 a.[3.75 4.25 6.25] b.[3.25 4.25 6.25] c.[3.75 4.75 6.75] d.[4.25 3.75 6.25]
Last Answer : c.[3.75 4.75 6.75]
Description : Find the tangent vector of line having end points P1(3,5,8) and P2 (6,4,3) a.3i+j-5k b.3i-j-5k c.3i-j+5k d.-3i-j-5k
Last Answer : b.3i-j-5k
Description : Write parametric equation of line having end points P1(3,5,8) and P2 (6,4,3). a.[3 5 8]+u[3 -1 -5] b.[3 5 8]+u[3 1 5] c.[3 8 5]+u[3 -1 -5] d.[3 5 8]+u[-3 1 5]
Last Answer : a.[3 5 8]+u[3 -1 -5]
Description : The unit vector in the direction of the line is defined as . a.tangent vector+length of the line b.tangent vector-length of the line c.tangent vector/length of the line d.length of the line/tangent vector
Last Answer : c.tangent vector/length of the line
Description : A line AB with end points A (2, 1) & B (7, 6) is to be moved by 3 units in x-direction & 4units in y-direction. Calculate new coordinates of points B. a.(10, 2) b.(2, 10) c.(10, 10) d.(10, 5)
Last Answer : c.(10, 10)
Description : Reflection about the line y=0, the axis, is accomplished with the transformationmatrix with how many elements as ‘0’? a.8 b.9 c.4 d.6
Last Answer : d.6
Description : If two pure reflections about a line passing through the origin are appliedsuccessively the result is a.Pure rotation b.Quarter rotation c.Half rotation d.True reflection
Last Answer : a.Pure rotation
Description : A line AB with end point A (2,3) & B (7,8) is to be rotated about origin by 300 inclockwise direction. Determine the coordinates of end points S of rotated line. a.(3.232, 2.598) b.(5.232, 3.598) c.(3.232, 1.298) d.(3.232, 1.598)
Last Answer : d.(3.232, 1.598)