Structuring and combining the primitives of the solid model in the graphics database,is achieved by the use of….. a.FEA b.transformations c.boolean operations d.none of the above

Structuring and combining the primitives of the solid model in the graphics database,is achieved by the use of….. a.FEA b.transformations c.boolean operations d.none of the above
by

1 Answer

Answer :

c.boolean operations
by

Related questions

In the following geometric primitives. which is not a solid entity of CSG modelling: a.Box b.Cone c.Cylinder d.Circle

Description : In the following geometric primitives. which is not a solid entity of CSG modelling: a.Box b.Cone c.Cylinder d.Circle

Last Answer : d.Circle

In FEA of a fluid mechanics problem, we need to find . a.stress distribution b.heat flux distribution c.pressure distribution d.all of the above

Description : In FEA of a fluid mechanics problem, we need to find . a.stress distribution b.heat flux distribution c.pressure distribution d.all of the above

Last Answer : c.pressure distribution

Which of the following module of FEA is used to determine natural frequency? a.Static analysis b.Thermal analysis c.Modal analysis d.All of the above

Description : Which of the following module of FEA is used to determine natural frequency? a.Static analysis b.Thermal analysis c.Modal analysis d.All of the above

Last Answer : c.Modal analysis

Which of the following is not an FEA package? a.ANSYS b.Nastran c.Abaqus d.AutoCAD

Description : Which of the following is not an FEA package? a.ANSYS b.Nastran c.Abaqus d.AutoCAD

Last Answer : d.AutoCAD

In FEA, the sub domains are called as . a.particles b.molecules c.elements d.none

Description : In FEA, the sub domains are called as . a.particles b.molecules c.elements d.none

Last Answer : c.elements

What is the full form of FEA a.Fracture Element Analysis b.Finite Element Analysis c.Future Electronic Analysis d.None of the above

Description : What is the full form of FEA a.Fracture Element Analysis b.Finite Element Analysis c.Future Electronic Analysis d.None of the above

Last Answer : b.Finite Element Analysis

What is the use of homogeneous coordinates and matrix representation? a.To treat all 3 transformations in a consistent way b.To scale c.To rotate d.To shear the object

Description : What is the use of homogeneous coordinates and matrix representation? a.To treat all 3 transformations in a consistent way b.To scale c.To rotate d.To shear the object

Last Answer : a.To treat all 3 transformations in a consistent way

Reversing the order in which a sequence of transformations is performed may affect thetransformed position of an object. a.TRUE b.FALSE c. d.

Description : Reversing the order in which a sequence of transformations is performed may affect thetransformed position of an object. a.TRUE b.FALSE c. d.

Last Answer : a.TRUE

The basic geometric transformations are a.Translation b.Rotation c.Scaling d.All of the mentioned

Description : The basic geometric transformations are a.Translation b.Rotation c.Scaling d.All of the mentioned

Last Answer : d.All of the mentioned

The data representation of CSG objects is represented by a.a binary tree b.a boolean operation c.a primitive d.none of the above

Description : The data representation of CSG objects is represented by a.a binary tree b.a boolean operation c.a primitive d.none of the above

Last Answer : a.a binary tree

A computer model of a part design on a CAD system is called which of the following? a.Computer Prototype b.Geometric Prototype c.Solid Prototype d.Virtual Prototype

Description : A computer model of a part design on a CAD system is called which of the following? a.Computer Prototype b.Geometric Prototype c.Solid Prototype d.Virtual Prototype

Last Answer : d.Virtual Prototype

Which of the following can not be the input of CAD solid model? a.Physical mockup b.2D surface data c.Tooling d.3D CAD data

Description : Which of the following can not be the input of CAD solid model? a.Physical mockup b.2D surface data c.Tooling d.3D CAD data

Last Answer : c.Tooling

Choose the correct sequence to generate prototype a.3D CAD data - CAD solid model - STL file - RP prototype b.CAD solid model - 3D CAD data - RP prototype - STL file c.STL file - 3D CAD data - CAD solid model - RP prototype d.3D CAD data - STL file - CAD solid model - RP prototype

Description : Choose the correct sequence to generate prototype a.3D CAD data - CAD solid model - STL file - RP prototype b.CAD solid model - 3D CAD data - RP prototype - STL file c.STL file - 3D CAD data - CAD solid model - RP prototype d.3D CAD data - STL file - CAD solid model - RP prototype

Last Answer : a.3D CAD data - CAD solid model - STL file - RP prototype

Which kind of model can store information about geometry a.Solid model b.Surface model c.Wireframe model d.none of the above

Description : Which kind of model can store information about geometry a.Solid model b.Surface model c.Wireframe model d.none of the above

Last Answer : a.Solid model

The software that is used to control the computer’s work flow, organize its data andperform housekeeping functions is known as a.operating software b.graphics software c.application software d.programming software

Description : The software that is used to control the computer’s work flow, organize its data andperform housekeeping functions is known as a.operating software b.graphics software c.application software d.programming software

Last Answer : a.operating software

A system that automates the drafting process with interactive computer graphics iscalled a.Computer Aided Engineering (CAE) b.Computer Aided Design (CAD) c.Computer Aided Manufacturing (CAM) d.Computer Aided Instruction (CAI)

Description : A system that automates the drafting process with interactive computer graphics iscalled a.Computer Aided Engineering (CAE) b.Computer Aided Design (CAD) c.Computer Aided Manufacturing (CAM) d.Computer Aided Instruction (CAI)

Last Answer : b.Computer Aided Design (CAD)

The window opened on the raster graphics screen in which the image will bedisplayed is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Description : The window opened on the raster graphics screen in which the image will bedisplayed is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Last Answer : d.Interface window

Which of the following graphic primitives are considered as the basic building blocks of computer graphics ? (a) Points (b) Lines (c) Polylines (d) Polygons Codes : (A) (a) only (B) (a) and (b) (C) (a), (b) and (c) (D) (a), (b), (c) and (d)

Description : Which of the following graphic primitives are considered as the basic building blocks of computer graphics ? (a) Points (b) Lines (c) Polylines (d) Polygons Codes : (A) (a) only (B) (a) and (b) (C) (a), (b) and (c) (D) (a), (b), (c) and (d)

Last Answer : Answer: B

Repetitive CNC machine operations conveniently performing and execute with onecommand instead of programming of series of individual move called ….. a.Common Cycle b.Incremental Programming c.Canned Cycle d.None of the above

Description : Repetitive CNC machine operations conveniently performing and execute with onecommand instead of programming of series of individual move called ….. a.Common Cycle b.Incremental Programming c.Canned Cycle d.None of the above

Last Answer : c.Canned Cycle

CNC machining centres do not include operations like a.milling b.boring c.welding d.tapping

Description : CNC machining centres do not include operations like a.milling b.boring c.welding d.tapping

Last Answer : c.welding

Which co-ordinates allow common vector operations such as translation, rotation,scaling and perspective projection to be represented as a matrix by which the vector is multiplied? a.vector co-ordinates b.3D co-ordinates c.affine co-ordinates d.homogenous co-ordinates

Description : Which co-ordinates allow common vector operations such as translation, rotation,scaling and perspective projection to be represented as a matrix by which the vector is multiplied? a.vector co-ordinates b.3D co-ordinates c.affine co-ordinates d.homogenous co-ordinates

Last Answer : d.homogenous co-ordinates

Which two disciplines are tied by a common database? a.documentation and geometric modeling b.CAD and CAM c.drafting and documentation d.none of the mentioned

Description : Which two disciplines are tied by a common database? a.documentation and geometric modeling b.CAD and CAM c.drafting and documentation d.none of the mentioned

Last Answer : b.CAD and CAM

____ is defined as the set of technologies that can construct physical solid models from CAD data a.Rapid Production b.Rapid prototyping c.Lean Manufacturing d.Artificial intelligence

Description : ____ is defined as the set of technologies that can construct physical solid models from CAD data a.Rapid Production b.Rapid prototyping c.Lean Manufacturing d.Artificial intelligence

Last Answer : b.Rapid prototyping

Of all of the current material addition rapid prototyping technologies, which one is the mostwidely used? a.Ballistic particle manufacturing b.Selective laser sintering c.Solid ground curing d.Stereolithography

Description : Of all of the current material addition rapid prototyping technologies, which one is the mostwidely used? a.Ballistic particle manufacturing b.Selective laser sintering c.Solid ground curing d.Stereolithography

Last Answer : d.Stereolithography

Which of the following are problems with the current rapid prototyping and additivemanufacturing technologies? a.Limited material variety b.Inability to convert a solid part into layers c.Poor machinability of the starting material d.The inability of the designer to design the part

Description : Which of the following are problems with the current rapid prototyping and additivemanufacturing technologies? a.Limited material variety b.Inability to convert a solid part into layers c.Poor machinability of the starting material d.The inability of the designer to design the part

Last Answer : a.Limited material variety

Which one of the following RP technologies uses solid sheet stock as the starting material? a.Droplet deposition manufacturing b.Fused-deposition modeling c.Laminated-Object Manufacturing d.Selective Laser Sintering

Description : Which one of the following RP technologies uses solid sheet stock as the starting material? a.Droplet deposition manufacturing b.Fused-deposition modeling c.Laminated-Object Manufacturing d.Selective Laser Sintering

Last Answer : c.Laminated-Object Manufacturing

From the following, in which process, the input material is in solid form? a.SLA b.SLS c.FDM d.MJM

Description : From the following, in which process, the input material is in solid form? a.SLA b.SLS c.FDM d.MJM

Last Answer : c.FDM

Which of the following is not Powder-Based RP system? a.Selective Laser Sintering (SLS) b.Solid Object Ultraviolet-Laser Printer (SOUP) c.Electron Beam Melting (EBM) d.Direct Metal Deposition (DMD)

Description : Which of the following is not Powder-Based RP system? a.Selective Laser Sintering (SLS) b.Solid Object Ultraviolet-Laser Printer (SOUP) c.Electron Beam Melting (EBM) d.Direct Metal Deposition (DMD)

Last Answer : b.Solid Object Ultraviolet-Laser Printer (SOUP)

Which of the following is not Solid-based RP system? a.Laminated Object Manufacturing (LOM) b.Paper Lamination Technology (PLT) c.Electron Beam Melting (EBM) d.Fused Deposition Modeling (FDM)

Description : Which of the following is not Solid-based RP system? a.Laminated Object Manufacturing (LOM) b.Paper Lamination Technology (PLT) c.Electron Beam Melting (EBM) d.Fused Deposition Modeling (FDM)

Last Answer : c.Electron Beam Melting (EBM)

Which of the following is not Liquid-based RP system? a.Stereolithography Apparatus (SLA) b.Laminated Object Manufacturing (LOM) c.Solid Ground Curing (SGC) d.Solid Object Ultraviolet-Laser Printer (SOUP

Description : Which of the following is not Liquid-based RP system? a.Stereolithography Apparatus (SLA) b.Laminated Object Manufacturing (LOM) c.Solid Ground Curing (SGC) d.Solid Object Ultraviolet-Laser Printer (SOUP

Last Answer : b.Laminated Object Manufacturing (LOM)

In the ___________ process, one starts with a single block of solid material larger than the finalsize of the desired object and material is removed until the desired shape is reached. a.Subtractive process b.Additive process c.Formative process d.All of above

Description : In the ___________ process, one starts with a single block of solid material larger than the finalsize of the desired object and material is removed until the desired shape is reached. a.Subtractive process b.Additive process c.Formative process d.All of above

Last Answer : a.Subtractive process

The term that is used for geometric modelling like solid modelling, wire frame modellingand drafting is known as a.software package b.operating system c.application software d.none of the mentioned

Description : The term that is used for geometric modelling like solid modelling, wire frame modellingand drafting is known as a.software package b.operating system c.application software d.none of the mentioned

Last Answer : a.software package

For 3D modeling of automobile body styling, which of the following is a preferredtechnique a.Constructive Solid Geometry b.Pure Primitive Instancing c.Boundary Representation d.Spatial Occupancy Enumeration

Description : For 3D modeling of automobile body styling, which of the following is a preferredtechnique a.Constructive Solid Geometry b.Pure Primitive Instancing c.Boundary Representation d.Spatial Occupancy Enumeration

Last Answer : c.Boundary Representation

For 3D modeling of automobile body styling, which of the following is a preferredtechnique? a.Constructive Solid Geometry b.Pure Primitive Instancing c.Boundary Representation d.Spatial Occupancy Enumeration

Description : For 3D modeling of automobile body styling, which of the following is a preferredtechnique? a.Constructive Solid Geometry b.Pure Primitive Instancing c.Boundary Representation d.Spatial Occupancy Enumeration

Last Answer : c.Boundary Representation

From the following, which method is also called as the Building Block Approach? a.Cellular Decomposition b.Spatial Occupancy Enumeration c.Generalized Sweeps d.Constructive Solid Geometry

Description : From the following, which method is also called as the Building Block Approach? a.Cellular Decomposition b.Spatial Occupancy Enumeration c.Generalized Sweeps d.Constructive Solid Geometry

Last Answer : d.Constructive Solid Geometry

B-rep and C-Rep are the methods of a.solid modeling b.surface modeling c.wireframe modeling d.2D modeling

Description : B-rep and C-Rep are the methods of a.solid modeling b.surface modeling c.wireframe modeling d.2D modeling

Last Answer : a.solid modeling

In the following geometric modelling techniques. which cannot be used for finiteelement analysis: a.Wireframe modelling b.Surface modelling c.Solid modeling d.none of the above

Description : In the following geometric modelling techniques. which cannot be used for finiteelement analysis: a.Wireframe modelling b.Surface modelling c.Solid modeling d.none of the above

Last Answer : d.none of the above

In the following three-dimensional modelling techniques. Which do not requiremuch computer time and memory? a.Surface modelling b.Solid modelling c.Wireframe modelling d.All of the above

Description : In the following three-dimensional modelling techniques. Which do not requiremuch computer time and memory? a.Surface modelling b.Solid modelling c.Wireframe modelling d.All of the above

Last Answer : c.Wireframe modelling

In the following geometric modelling techniques which are not three-dimensionalmodelling? a.Wireframe modelling b.Drafting c.Surface modelling d.solid modelling

Description : In the following geometric modelling techniques which are not three-dimensionalmodelling? a.Wireframe modelling b.Drafting c.Surface modelling d.solid modelling

Last Answer : b.Drafting

In the context of rapid prototyping and additive manufacturing, tessellation refers to theprocess of slicing the CAD model of the part into layers. a.Droplet Deposition Manufacturing b.Used-Deposition Modeling c.Laminated-Object Manufacturing d.Stereolithography

Description : In the context of rapid prototyping and additive manufacturing, tessellation refers to theprocess of slicing the CAD model of the part into layers. a.Droplet Deposition Manufacturing b.Used-Deposition Modeling c.Laminated-Object Manufacturing d.Stereolithography

Last Answer : d.Stereolithography

Which one is NOT related to rapid prototyping definition? a.Layer by layer b.Physical model c.From 3D CAD data d.Production line

Description : Which one is NOT related to rapid prototyping definition? a.Layer by layer b.Physical model c.From 3D CAD data d.Production line

Last Answer : d.Production line

What type of inner structure can be used to reduce the printing time of the model in RP? a.Higher resolution b.Smaller polygons c.Lower resolution d.None of the above

Description : What type of inner structure can be used to reduce the printing time of the model in RP? a.Higher resolution b.Smaller polygons c.Lower resolution d.None of the above

Last Answer : c.Lower resolution

What type of inner structure makes the smoothest model in RP? a.Higher resolution b.Larger polygons c.Lower resolution d.None of the above

Description : What type of inner structure makes the smoothest model in RP? a.Higher resolution b.Larger polygons c.Lower resolution d.None of the above

Last Answer : a.Higher resolution

Among the following, which one is the earliest step in Data Processing for RapidPrototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Description : Among the following, which one is the earliest step in Data Processing for RapidPrototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Last Answer : b.Part orientation

Among the following, which one is the last step in Data Processing for Rapid Prototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Description : Among the following, which one is the last step in Data Processing for Rapid Prototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Last Answer : c.Tool path generation

A tessellated model is said to be valid if there are ________ a.no missing facets b.no degenerate facets c.no overlapping facets d.all of the above

Description : A tessellated model is said to be valid if there are ________ a.no missing facets b.no degenerate facets c.no overlapping facets d.all of the above

Last Answer : d.all of the above

STL files contains ______ a.mass properties of the model b.geometrical data c.drawing data d.all of the above

Description : STL files contains ______ a.mass properties of the model b.geometrical data c.drawing data d.all of the above

Last Answer : b.geometrical data

Process of converting STL file model in to layers is called________in RP a.chopping b.slicing c.cutting d.trimming

Description : Process of converting STL file model in to layers is called________in RP a.chopping b.slicing c.cutting d.trimming

Last Answer : b.slicing

For rapid prototyping 3D CAD model should be converted into______file a.SGC b.SLA c.STL d.SLS

Description : For rapid prototyping 3D CAD model should be converted into______file a.SGC b.SLA c.STL d.SLS

Last Answer : c.STL

If the structure is more complex in order to simplify the model, we need to subdividethe structure into substructures. These substructures are termed as . a.elements b.modules c.links d.models

Description : If the structure is more complex in order to simplify the model, we need to subdividethe structure into substructures. These substructures are termed as . a.elements b.modules c.links d.models

Last Answer : b.modules