Description : Which of the following module of FEA is used to determine natural frequency? a.Static analysis b.Thermal analysis c.Modal analysis d.All of the above
Last Answer : c.Modal analysis
Description : Finite element analysis deals with . a.approximate numerical solution b.non-boundary value problems c.Laplace equations d.All of the above
Last Answer : a.approximate numerical solution
Description : In FEA of a fluid mechanics problem, we need to find . a.stress distribution b.heat flux distribution c.pressure distribution d.all of the above
Last Answer : c.pressure distribution
Description : Which of the following is not an FEA package? a.ANSYS b.Nastran c.Abaqus d.AutoCAD
Last Answer : d.AutoCAD
Description : In FEA, the sub domains are called as . a.particles b.molecules c.elements d.none
Last Answer : c.elements
Description : Structuring and combining the primitives of the solid model in the graphics database,is achieved by the use of….. a.FEA b.transformations c.boolean operations d.none of the above
Last Answer : c.boolean operations
Description : The applications of the Finite Element Method in two-dimensional analyses are . a.stretching of plates b.gravity of dams c.axisymmetric shells d.all of the above
Last Answer : c.axisymmetric shells
Description : The finite element methods can be applied in ---------areas. a.thermal b.soil and rock mechanics c.vibration d.all of the above
Last Answer : d.all of the above
Description : is/are the phase/s of finite element method a.Pre-processing b.Solution c.Post Processing d.None
Last Answer : c.Post Processing
Description : The finite element method is mostly used in the field of a.structural mechanics b.classical mechanics c.applied mechanics d.engineering mechanics
Last Answer : d.engineering mechanics
Description : To solve the FEM problem, it subdivides a large problem into smaller, simpler parts that arecalled a.static elements b.dynamic elements c.infinite elements d.finite elements
Last Answer : d.finite elements
Description : Choose the right sequence for Production Flow Analysis a.PFA Chart - Data Collection - Sortation of process plans b.Data collection - PFA chart - Sortation of process plans c.Sortation of process plans - Data collection - PFA chart d.Data collection - Sortation of process plans - PFA chart
Last Answer : d.Data collection - Sortation of process plans - PFA chart
Description : Which of the following is not the method of part family formation a.Visual inspection method b.Automatic product sorting c.Parts classification & coding d.Production flow analysis
Last Answer : b.Automatic product sorting
Description : The following is basically a material flow simplification technique a.A simple and visual method of cell design b.Family formation by classification and codification c.Cell formation using Production Flow Analysis d.All of the above
Last Answer : c.Cell formation using Production Flow Analysis
Description : Which of the following technique of grouping does not consider the design and shape aspect? a.A simple and visual method of cell design b.Family formation by classification and codification c.Cell formation using Production Flow Analysis d.All of the above
Description : In cell formation using production flow analysis, the following process will be left out of theanalysis a.Grinding b.Milling c.Drilling d.Gear cutting
Last Answer : d.Gear cutting
Description : In truss analysis, the reactions can be found by using the equation . a.R=KQ+F b.R=KQ-F c.R=K+QF d.R=K-QF
Last Answer : b.R=KQ-F
Description : For thermal analysis, the field variable is a.stress b.strain c.displacement d.Temperature
Last Answer : d.Temperature
Description : For truss analysis, which type of elements is used? a.Triangle b.Parallelogram c.Rectangle d.Bar
Last Answer : d.Bar
Description : In the following geometric modelling techniques. which cannot be used for finiteelement analysis: a.Wireframe modelling b.Surface modelling c.Solid modeling d.none of the above
Last Answer : d.none of the above
Description : From which of the following is not the main element of Flexible manufacturing system a.Work handling system b.Material handling system c.Tool handling system d.Main frame computer
Last Answer : a.Work handling system
Description : How many nodes are there in a tetrahedron with curved sides element? a.6 b.8 c.10 d.12
Last Answer : c.10
Description : How many nodes are there in a hexahedron element? a.4 b.6 c.8 d.10
Last Answer : c.8
Description : How many nodes are there in a tetrahedron element? a.3 b.4 c.5 d.6
Last Answer : b.4
Description : The actual thickness of plane strain element is . a.very large b.very small c.assumed by software d.any of the above
Last Answer : a.very large
Description : is defined as the ratio of the largest dimension of theelement to the smallest dimension. a.Element depth ratio b.Mode shape ratio c.Aspect ratio d.None of the above
Last Answer : c.Aspect ratio
Description : Axis-Symmetric element is Element a.1D b.2D c.3D d.4D
Last Answer : b.2D
Description : From below, choose the condition for the axisymmetric element. a.Symmetric about axis b.Boundary conditions are symmetric about an axis c.Loading conditions are symmetric about an axis d.All the above
Last Answer : d.All the above
Description : How many nodes are there in a 3-D brick element? a.3 b.6 c.8 d.9
Description : The determinant of an element stiffness matrix is always a.3 b.2 c.1 d.
Last Answer : d.0
Description : Example for one – Dimensional element is . a.triangular element b.brick element c.truss element d.axisymmetric element
Last Answer : c.truss element
Description : The truss element can deform only in the a.vertical direction b.horizontal direction c.inclined direction d.axial direction
Last Answer : d.axial direction
Description : The truss element can resist only a.surface force b.axial force c.point load d.none of the above
Last Answer : b.axial force
Description : To find the nodal displacements in all parts of the element, are used. a.shape function b.node function c.element function d.coordinate function
Last Answer : a.shape function
Description : Example of 2-D Element is . a.bar b.triangle c.hexahedron d.tetrahedron
Last Answer : b.triangle
Description : The numbers of node for 1 D element are a.1 b.2 c.3 d.
Last Answer : b.2
Description : Number of displacement polynomials used for an element depends on . a.nature of element b.type of an element c.degrees of freedom d.nodes
Last Answer : c.degrees of freedom
Description : A triangular plane stress element has how many degrees of freedom? a.3 b.4 c.5 d.6
Last Answer : d.6
Description : From the following, which type of element is not two dimensional? a.Tetrahedron b.Quadrilateral c.Parallelogram d.Rectangle
Last Answer : a.Tetrahedron
Description : Rotation is simply---------object w.r.t origin or centre point. a.Turn b.Shift c.Compression d.Drag element
Last Answer : a.Turn
Description : What is the full form of AS/RS in FMS? a.Automated storage and recovery system b.Automatic storage and rotary system c.Automated storage and retrieval system d.Automated storage and regenerative system
Last Answer : c.Automated storage and retrieval system
Description : From the following what is the full form of AGV? a.Automatic Guided Vehicle b.Automated Gas Vehicle c.Automated Guided Vehicle d.None of the above
Last Answer : c.Automated Guided Vehicle
Description : Full form of MJM is______ a.Multi Joint Modelling b.Multi Jet Modelling c.Muted Jet Modelling d.Mitred Jet Modelling
Last Answer : b.Multi Jet Modelling
Description : Full form of FDM is_______ a.Fixed Development Modelling b.Fusion Development Modelling c.Fused Deposition Modelling d.Focused Deposition Modelling
Last Answer : c.Fused Deposition Modelling
Description : Full form of STL is _____ a.Straight-lithography b.Streto-lithography c.Stereo-lithography d.Straight-lipsography
Last Answer : c.Stereo-lithography
Description : What is the full form of ATC? a.Automatic tool changer b.Arranged tool changer c.Automatic tool controller d.Arranged tool controller
Last Answer : a.Automatic tool changer
Description : Full form of MCU is………… a.Machine computer unit b.Machine control universal c.Machine control unit d.None of the above
Last Answer : c.Machine control unit
Description : Form code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow
Last Answer : a.Design attributes
Description : The last four digits of the Opitz classification system are ______ a.Form code b.Secondary code c.Supplementary code d.Stationary code
Last Answer : b.Secondary code
Description : The middle four digits of the Opitz classification system are ______ a.Form code b.Secondary code c.Supplementary code d.Stationary code
Last Answer : c.Supplementary code