are used to express the geometry or shape of theelement a.Mode shapes b.Shape functions c.Natural curves d.None of the above

are used to express the geometry or shape of theelement a.Mode shapes b.Shape functions c.Natural curves d.None of the above
by

1 Answer

Answer :

b.Shape functions
by

Related questions

is defined as the ratio of the largest dimension of theelement to the smallest dimension. a.Element depth ratio b.Mode shape ratio c.Aspect ratio d.None of the above

Description : is defined as the ratio of the largest dimension of theelement to the smallest dimension. a.Element depth ratio b.Mode shape ratio c.Aspect ratio d.None of the above

Last Answer : c.Aspect ratio

The ___________ is used to create a surface using curves that form closed boundaries a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution

Description : The ___________ is used to create a surface using curves that form closed boundaries a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution

Last Answer : c.coons patch

In synthetic curves, first-order continuity yields a.a position continuous curve b.a slope continuous curve c.a curvature continuous curve d.none of the above

Description : In synthetic curves, first-order continuity yields a.a position continuous curve b.a slope continuous curve c.a curvature continuous curve d.none of the above

Last Answer : b.a slope continuous curve

In synthetic curves, zero-order continuity yields a.a position continuous curve b.a slope continuous curve c.a curvature continuous curve d.none of the above

Description : In synthetic curves, zero-order continuity yields a.a position continuous curve b.a slope continuous curve c.a curvature continuous curve d.none of the above

Last Answer : a.a position continuous curve

The is used to create a surface using curves that form closed boundaries. a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution

Description : The is used to create a surface using curves that form closed boundaries. a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution

Last Answer : c.coons patch

In synthetic curves, second-order continuity yields a.a position continuous curve b.a slope continuous curve c.a curvature continuous curve d.none of the above

Description : In synthetic curves, second-order continuity yields a.a position continuous curve b.a slope continuous curve c.a curvature continuous curve d.none of the above

Last Answer : c.a curvature continuous curve

curves allow local control of the curve a.Analytical b.Hermite cubic spline c.Beizer d.B-Spline

Description : curves allow local control of the curve a.Analytical b.Hermite cubic spline c.Beizer d.B-Spline

Last Answer : d.B-Spline

The tensor product technique constraints surfaces by two curves. a.2 b.1 c.3 d.4

Description : The tensor product technique constraints surfaces by two curves. a.2 b.1 c.3 d.4

Last Answer : b.1

QFor generating Coons patch we require a.A set of grid points on surface b.A set of control points c.Four bounding curves defining surface d.Two bounding curves and a set of grid control points

Description : QFor generating Coons patch we require a.A set of grid points on surface b.A set of control points c.Four bounding curves defining surface d.Two bounding curves and a set of grid control points

Last Answer : c.Four bounding curves defining surface

In which type of projection, actual dimensions and angles of objects andtherefore shapes cannot be preserved? a.Orthographic b.Isometric c.Perspective d.None of the above

Description : In which type of projection, actual dimensions and angles of objects andtherefore shapes cannot be preserved? a.Orthographic b.Isometric c.Perspective d.None of the above

Last Answer : c.Perspective

The STL files translate the part geometry from a CAD system to________ a.CNC machine b.VMC machine c.RP machine d.CAPP machine

Description : The STL files translate the part geometry from a CAD system to________ a.CNC machine b.VMC machine c.RP machine d.CAPP machine

Last Answer : c.RP machine

Stiffness matrix depends on a.material b.geometry c.both material and geometry d.none of the above

Description : Stiffness matrix depends on a.material b.geometry c.both material and geometry d.none of the above

Last Answer : c.both material and geometry

For 3D modeling of automobile body styling, which of the following is a preferredtechnique a.Constructive Solid Geometry b.Pure Primitive Instancing c.Boundary Representation d.Spatial Occupancy Enumeration

Description : For 3D modeling of automobile body styling, which of the following is a preferredtechnique a.Constructive Solid Geometry b.Pure Primitive Instancing c.Boundary Representation d.Spatial Occupancy Enumeration

Last Answer : c.Boundary Representation

For 3D modeling of automobile body styling, which of the following is a preferredtechnique? a.Constructive Solid Geometry b.Pure Primitive Instancing c.Boundary Representation d.Spatial Occupancy Enumeration

Description : For 3D modeling of automobile body styling, which of the following is a preferredtechnique? a.Constructive Solid Geometry b.Pure Primitive Instancing c.Boundary Representation d.Spatial Occupancy Enumeration

Last Answer : c.Boundary Representation

From the following, which method is also called as the Building Block Approach? a.Cellular Decomposition b.Spatial Occupancy Enumeration c.Generalized Sweeps d.Constructive Solid Geometry

Description : From the following, which method is also called as the Building Block Approach? a.Cellular Decomposition b.Spatial Occupancy Enumeration c.Generalized Sweeps d.Constructive Solid Geometry

Last Answer : d.Constructive Solid Geometry

Which kind of model can store information about geometry a.Solid model b.Surface model c.Wireframe model d.none of the above

Description : Which kind of model can store information about geometry a.Solid model b.Surface model c.Wireframe model d.none of the above

Last Answer : a.Solid model

In CNC machining tool radius compensation turning the left mode ON programming contourdone by a.G40 b.G41 c.G42 d.G43

Description : In CNC machining tool radius compensation turning the left mode ON programming contourdone by a.G40 b.G41 c.G42 d.G43

Last Answer : b.G41

Digit 5 in Opitz system is for_________ a.Part class b.Main shape c.Additional holes, teeth and forming d.Plane surface machining

Description : Digit 5 in Opitz system is for_________ a.Part class b.Main shape c.Additional holes, teeth and forming d.Plane surface machining

Last Answer : c.Additional holes, teeth and forming

Digit 4 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Description : Digit 4 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : d.Plane surface machining

Digit 3 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Description : Digit 3 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : c.Rotational machining

Digit 2 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Description : Digit 2 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : b.Main shape

Digit 1 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Description : Digit 1 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : a.Part class

Which of the following technique of grouping does not consider the design and shape aspect? a.A simple and visual method of cell design b.Family formation by classification and codification c.Cell formation using Production Flow Analysis d.All of the above

Description : Which of the following technique of grouping does not consider the design and shape aspect? a.A simple and visual method of cell design b.Family formation by classification and codification c.Cell formation using Production Flow Analysis d.All of the above

Last Answer : c.Cell formation using Production Flow Analysis

In Opitz system, 2nd digit indicates a.Type and Shape b.External shape and external shape elements c.External plane surface finishing d.Auxiliary hole and gear teeth

Description : In Opitz system, 2nd digit indicates a.Type and Shape b.External shape and external shape elements c.External plane surface finishing d.Auxiliary hole and gear teeth

Last Answer : b.External shape and external shape elements

In a simple and visual method of Cell design, the priorities in classifying may be in the order a.Rotational or non rotational – Material – Size – Shape b.Material – Rotational or non rotational – Size – Shape c.Size – Rotational or non rotational – Material – Shape d.Shape – Rotational or non rotational – Material – Size

Description : In a simple and visual method of Cell design, the priorities in classifying may be in the order a.Rotational or non rotational †Material †Size †Shape b.Material †Rotational or non ... non rotational †Material †Shape d.Shape †Rotational or non rotational †Material †Size

Last Answer : a.Rotational or non rotational – Material – Size – Shape

__________ is one where mechanical forces or restricting forms are applied on a material so asto form it into the desired shape a.Subtractive process b.Additive process c.Formative process d.All of above

Description : __________ is one where mechanical forces or restricting forms are applied on a material so asto form it into the desired shape a.Subtractive process b.Additive process c.Formative process d.All of above

Last Answer : c.Formative process

In the ___________ process, one starts with a single block of solid material larger than the finalsize of the desired object and material is removed until the desired shape is reached. a.Subtractive process b.Additive process c.Formative process d.All of above

Description : In the ___________ process, one starts with a single block of solid material larger than the finalsize of the desired object and material is removed until the desired shape is reached. a.Subtractive process b.Additive process c.Formative process d.All of above

Last Answer : a.Subtractive process

The characteristic of the shape function is a.the shape function has a unit value at one nodal point and zero value at the other nodes b.the sum of the shape function is equal to one c.both a & b d.None of the above

Description : The characteristic of the shape function is a.the shape function has a unit value at one nodal point and zero value at the other nodes b.the sum of the shape function is equal to one c.both a & b d.None of the above

Last Answer : c.both a & b

To find the nodal displacements in all parts of the element, are used. a.shape function b.node function c.element function d.coordinate function

Description : To find the nodal displacements in all parts of the element, are used. a.shape function b.node function c.element function d.coordinate function

Last Answer : a.shape function

The sum of the shape function is equal to a.0 b.0.5 c.1 d.2

Description : The sum of the shape function is equal to a.0 b.0.5 c.1 d.2

Last Answer : c.1

A cylinder can be created by drawing a rectangular shape using the ________ tool. a.revolve b.sweep c.extrude d.all of the above

Description : A cylinder can be created by drawing a rectangular shape using the ________ tool. a.revolve b.sweep c.extrude d.all of the above

Last Answer : a.revolve

In Beizer Curve, the flexibility of the shape would increase with _______ of the polygon. a.decrease in the number of vertices b.increase in the number of vertices c.decrease in control points d.none of the above

Description : In Beizer Curve, the flexibility of the shape would increase with _______ of the polygon. a.decrease in the number of vertices b.increase in the number of vertices c.decrease in control points d.none of the above

Last Answer : b.increase in the number of vertices

In Beizer Curve, the curve follows __________ a.the control points b.the shape of the defining polygon c.the defining points d.none of the above

Description : In Beizer Curve, the curve follows __________ a.the control points b.the shape of the defining polygon c.the defining points d.none of the above

Last Answer : b.the shape of the defining polygon

In Beizer Curve, the flexibility of the shape would increase with a.decrease in the number of vertices b.increase in the number of vertices c.decrease in control points d.none of the above

Description : In Beizer Curve, the flexibility of the shape would increase with a.decrease in the number of vertices b.increase in the number of vertices c.decrease in control points d.none of the above

Last Answer : b.increase in the number of vertices

In Beizer Curve, the curve follows a.the control points b.the shape of the defining polygon c.the defining points d.none of the above

Description : In Beizer Curve, the curve follows a.the control points b.the shape of the defining polygon c.the defining points d.none of the above

Last Answer : b.the shape of the defining polygon

The shape of Bezier curve is controlled by a.Control points b.Knots c.End points d.All the above

Description : The shape of Bezier curve is controlled by a.Control points b.Knots c.End points d.All the above

Last Answer : a.Control points

Which transformation distorts the shape of an object such that the transformed shapeappears as if the object were composed of internal layers that had been caused to slide over each other? a.Rotation b.Scaling up c.Scaling down d.Shearing

Description : Which transformation distorts the shape of an object such that the transformed shapeappears as if the object were composed of internal layers that had been caused to slide over each other? a.Rotation b.Scaling up c.Scaling down d.Shearing

Last Answer : d.Shearing

If the scaling factors values Sx and Sy < 1 then a.It reduces the size of object b.It increases the size of object c.It stunts the shape of an object d.None

Description : If the scaling factors values Sx and Sy < 1 then a.It reduces the size of object b.It increases the size of object c.It stunts the shape of an object d.None

Last Answer : a.It reduces the size of object

Computer will perform the data processing functions in a.NC b.CNC c.DNC d.None of the mentioned

Description : Computer will perform the data processing functions in a.NC b.CNC c.DNC d.None of the mentioned

Last Answer : b.CNC

The software that is used to control the computer’s work flow, organize its data andperform housekeeping functions is known as a.operating software b.graphics software c.application software d.programming software

Description : The software that is used to control the computer’s work flow, organize its data andperform housekeeping functions is known as a.operating software b.graphics software c.application software d.programming software

Last Answer : a.operating software

Which of the following module of FEA is used to determine natural frequency? a.Static analysis b.Thermal analysis c.Modal analysis d.All of the above

Description : Which of the following module of FEA is used to determine natural frequency? a.Static analysis b.Thermal analysis c.Modal analysis d.All of the above

Last Answer : c.Modal analysis

The points in the entire structure are defined using the coordinates system is known as a.local coordinates system b.natural coordinates system c.global coordinate system d.none of the above

Description : The points in the entire structure are defined using the coordinates system is known as a.local coordinates system b.natural coordinates system c.global coordinate system d.none of the above

Last Answer : c.global coordinate system

I come in different shapes and sizes. Part of me are curves, others are straight. You can put me anywhere you like, but there is only one right place for me. What am I? -Riddles

Description : I come in different shapes and sizes. Part of me are curves, others are straight. You can put me anywhere you like, but there is only one right place for me. What am I? -Riddles

Last Answer : A Jigsaw Puzzle Piece.

I come in different shapes and sizes. Part of me are curves, others are straight. You can put me anywhere you like, but there is only one right place for me. What am I? -Riddles

Description : I come in different shapes and sizes. Part of me are curves, others are straight. You can put me anywhere you like, but there is only one right place for me. What am I? -Riddles

Last Answer : A Jigsaw Puzzle Piece.

FFT analyzer can be used to find the ___________. (A) natural frequencies (B) mode shapes(C) both natural frequencies and mode shapes (D) none of the above

Description : FFT analyzer can be used to find the ___________. (A) natural frequencies (B) mode shapes(C) both natural frequencies and mode shapes (D) none of the above

Last Answer : (C) both natural frequencies and mode shapes

During agitation of liquids, the (A) Froude number is independent for the curves between power number and Reynolds number in baffled system (B) Power number becomes independent of impellers Reynolds number at high Reynolds number, but is dependent on the geometry of the impeller (C) Froude number is used to account for the effect of surface (e.g., the centre vortex) on the power number (D) All (A), (B) and (C)

Description : During agitation of liquids, the (A) Froude number is independent for the curves between power number and Reynolds number in baffled system (B) Power number becomes independent of impellers Reynolds number at high Reynolds number, ... , the centre vortex) on the power number (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which one of the following statements is TRUE? a.Teach pendant is used for lead-through teaching. b.Teach pendant is used for manual teaching. c.Teach pendant is used for off-line teaching of robots. d.Teach pendant is not used in robot teaching.

Description : Which one of the following statements is TRUE? a.Teach pendant is used for lead-through teaching. b.Teach pendant is used for manual teaching. c.Teach pendant is used for off-line teaching of robots. d.Teach pendant is not used in robot teaching.

Last Answer : b.Teach pendant is used for manual teaching.

A company is producing 15000 mobiles annually. Determine production scale of company a.Low Production b.Medium Production c.High Production d.None

Description : A company is producing 15000 mobiles annually. Determine production scale of company a.Low Production b.Medium Production c.High Production d.None

Last Answer : c.High Production

--------is a manufacturing system in which sequence of operation is fixed by equipmentconfiguration a.Flexible b.Programmable c.Fixed d.All of above

Description : --------is a manufacturing system in which sequence of operation is fixed by equipmentconfiguration a.Flexible b.Programmable c.Fixed d.All of above

Last Answer : c.Fixed

Which manufacturing system is best suited for batch production a.Flexible b.Programmable c.Fixed d.All of above

Description : Which manufacturing system is best suited for batch production a.Flexible b.Programmable c.Fixed d.All of above

Last Answer : b.Programmable