The sum of the shape function is equal to a.0 b.0.5 c.1 d.2

The sum of the shape function is equal to a.0 b.0.5 c.1 d.2
by

1 Answer

Answer :

c.1
by

Related questions

The characteristic of the shape function is a.the shape function has a unit value at one nodal point and zero value at the other nodes b.the sum of the shape function is equal to one c.both a & b d.None of the above

Description : The characteristic of the shape function is a.the shape function has a unit value at one nodal point and zero value at the other nodes b.the sum of the shape function is equal to one c.both a & b d.None of the above

Last Answer : c.both a & b

Mathematically, the ellipse is a curve generated by a point moving in space such that atany position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Description : Mathematically, the ellipse is a curve generated by a point moving in space such that atany position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Last Answer : a.the major diameter

Mathematically, the ellipse is a curve generated by a point moving in space such thatat any position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Description : Mathematically, the ellipse is a curve generated by a point moving in space such thatat any position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Last Answer : a.the major diameter

To find the nodal displacements in all parts of the element, are used. a.shape function b.node function c.element function d.coordinate function

Description : To find the nodal displacements in all parts of the element, are used. a.shape function b.node function c.element function d.coordinate function

Last Answer : a.shape function

Digit 5 in Opitz system is for_________ a.Part class b.Main shape c.Additional holes, teeth and forming d.Plane surface machining

Description : Digit 5 in Opitz system is for_________ a.Part class b.Main shape c.Additional holes, teeth and forming d.Plane surface machining

Last Answer : c.Additional holes, teeth and forming

Digit 4 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Description : Digit 4 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : d.Plane surface machining

Digit 3 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Description : Digit 3 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : c.Rotational machining

Digit 2 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Description : Digit 2 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : b.Main shape

Digit 1 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Description : Digit 1 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : a.Part class

Which of the following technique of grouping does not consider the design and shape aspect? a.A simple and visual method of cell design b.Family formation by classification and codification c.Cell formation using Production Flow Analysis d.All of the above

Description : Which of the following technique of grouping does not consider the design and shape aspect? a.A simple and visual method of cell design b.Family formation by classification and codification c.Cell formation using Production Flow Analysis d.All of the above

Last Answer : c.Cell formation using Production Flow Analysis

In Opitz system, 2nd digit indicates a.Type and Shape b.External shape and external shape elements c.External plane surface finishing d.Auxiliary hole and gear teeth

Description : In Opitz system, 2nd digit indicates a.Type and Shape b.External shape and external shape elements c.External plane surface finishing d.Auxiliary hole and gear teeth

Last Answer : b.External shape and external shape elements

In a simple and visual method of Cell design, the priorities in classifying may be in the order a.Rotational or non rotational – Material – Size – Shape b.Material – Rotational or non rotational – Size – Shape c.Size – Rotational or non rotational – Material – Shape d.Shape – Rotational or non rotational – Material – Size

Description : In a simple and visual method of Cell design, the priorities in classifying may be in the order a.Rotational or non rotational †Material †Size †Shape b.Material †Rotational or non ... non rotational †Material †Shape d.Shape †Rotational or non rotational †Material †Size

Last Answer : a.Rotational or non rotational – Material – Size – Shape

__________ is one where mechanical forces or restricting forms are applied on a material so asto form it into the desired shape a.Subtractive process b.Additive process c.Formative process d.All of above

Description : __________ is one where mechanical forces or restricting forms are applied on a material so asto form it into the desired shape a.Subtractive process b.Additive process c.Formative process d.All of above

Last Answer : c.Formative process

In the ___________ process, one starts with a single block of solid material larger than the finalsize of the desired object and material is removed until the desired shape is reached. a.Subtractive process b.Additive process c.Formative process d.All of above

Description : In the ___________ process, one starts with a single block of solid material larger than the finalsize of the desired object and material is removed until the desired shape is reached. a.Subtractive process b.Additive process c.Formative process d.All of above

Last Answer : a.Subtractive process

are used to express the geometry or shape of theelement a.Mode shapes b.Shape functions c.Natural curves d.None of the above

Description : are used to express the geometry or shape of theelement a.Mode shapes b.Shape functions c.Natural curves d.None of the above

Last Answer : b.Shape functions

is defined as the ratio of the largest dimension of theelement to the smallest dimension. a.Element depth ratio b.Mode shape ratio c.Aspect ratio d.None of the above

Description : is defined as the ratio of the largest dimension of theelement to the smallest dimension. a.Element depth ratio b.Mode shape ratio c.Aspect ratio d.None of the above

Last Answer : c.Aspect ratio

A cylinder can be created by drawing a rectangular shape using the ________ tool. a.revolve b.sweep c.extrude d.all of the above

Description : A cylinder can be created by drawing a rectangular shape using the ________ tool. a.revolve b.sweep c.extrude d.all of the above

Last Answer : a.revolve

In Beizer Curve, the flexibility of the shape would increase with _______ of the polygon. a.decrease in the number of vertices b.increase in the number of vertices c.decrease in control points d.none of the above

Description : In Beizer Curve, the flexibility of the shape would increase with _______ of the polygon. a.decrease in the number of vertices b.increase in the number of vertices c.decrease in control points d.none of the above

Last Answer : b.increase in the number of vertices

In Beizer Curve, the curve follows __________ a.the control points b.the shape of the defining polygon c.the defining points d.none of the above

Description : In Beizer Curve, the curve follows __________ a.the control points b.the shape of the defining polygon c.the defining points d.none of the above

Last Answer : b.the shape of the defining polygon

In Beizer Curve, the flexibility of the shape would increase with a.decrease in the number of vertices b.increase in the number of vertices c.decrease in control points d.none of the above

Description : In Beizer Curve, the flexibility of the shape would increase with a.decrease in the number of vertices b.increase in the number of vertices c.decrease in control points d.none of the above

Last Answer : b.increase in the number of vertices

In Beizer Curve, the curve follows a.the control points b.the shape of the defining polygon c.the defining points d.none of the above

Description : In Beizer Curve, the curve follows a.the control points b.the shape of the defining polygon c.the defining points d.none of the above

Last Answer : b.the shape of the defining polygon

The shape of Bezier curve is controlled by a.Control points b.Knots c.End points d.All the above

Description : The shape of Bezier curve is controlled by a.Control points b.Knots c.End points d.All the above

Last Answer : a.Control points

Which transformation distorts the shape of an object such that the transformed shapeappears as if the object were composed of internal layers that had been caused to slide over each other? a.Rotation b.Scaling up c.Scaling down d.Shearing

Description : Which transformation distorts the shape of an object such that the transformed shapeappears as if the object were composed of internal layers that had been caused to slide over each other? a.Rotation b.Scaling up c.Scaling down d.Shearing

Last Answer : d.Shearing

If the scaling factors values Sx and Sy < 1 then a.It reduces the size of object b.It increases the size of object c.It stunts the shape of an object d.None

Description : If the scaling factors values Sx and Sy < 1 then a.It reduces the size of object b.It increases the size of object c.It stunts the shape of an object d.None

Last Answer : a.It reduces the size of object

The parabola is defined mathematically as a curve generated by a point that moves suchthat its distance from the focus is always__________the distance to the directrix a.larger than b.smaller than c.equal to d.none of the above

Description : The parabola is defined mathematically as a curve generated by a point that moves suchthat its distance from the focus is always__________the distance to the directrix a.larger than b.smaller than c.equal to d.none of the above

Last Answer : c.equal to

From the following which is the function of material handling system used in FMS a.Handling of parts with different variety b.Independent movement of part between stations c.Both A & B d.None of the above

Description : From the following which is the function of material handling system used in FMS a.Handling of parts with different variety b.Independent movement of part between stations c.Both A & B d.None of the above

Last Answer : b.Independent movement of part between stations

In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right compensation, the trajectory of the cutter will be a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5) b.(0,-5), (55,-5), (55, 35), (-5, 35), (-5,-5) c.(5, 5), (5, 25), (45, 25), (45, 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)

n an NC machining operation, the tool has to be moved from point (5, 4) to point (7, 2) alonga circular path with centre at (5, 2). Before starting the operation, the tool is at (5, 4). The G and N codes for this motion are a.N010 GO3 X7.0 Y2.0 I5.0 J2.0 b.N010 GO2 X7.0 Y2.0 I5.0 J2.0 c.N010 GO1 X7.0 Y2.0 I5.0 J2.0 d.N010 GOO X7.0 Y2.0 I5.0 J2.0

Description : n an NC machining operation, the tool has to be moved from point (5, 4) to point (7, 2) alonga circular path with centre at (5, 2). Before starting the operation, the tool is at (5, 4). The G and N codes for this motion ... 0 I5.0 J2.0 c.N010 GO1 X7.0 Y2.0 I5.0 J2.0 d.N010 GOO X7.0 Y2.0 I5.0 J2.0

Last Answer : b.N010 GO2 X7.0 Y2.0 I5.0 J2.0

For Q 51, find coordinates of point on circle at u=0 a.11.6, 7 b.7, 11 c.11, 7 d.11.5, 7.5

Description : For Q 51, find coordinates of point on circle at u=0 a.11.6, 7 b.7, 11 c.11, 7 d.11.5, 7.5

Last Answer : a.11.6, 7

Find coordinates of points on line having end points P1(3,5,8) and P2 (6,4,3) at u=0.25 a.[3.75 4.25 6.25] b.[3.25 4.25 6.25] c.[3.75 4.75 6.75] d.[4.25 3.75 6.25]

Description : Find coordinates of points on line having end points P1(3,5,8) and P2 (6,4,3) at u=0.25 a.[3.75 4.25 6.25] b.[3.25 4.25 6.25] c.[3.75 4.75 6.75] d.[4.25 3.75 6.25]

Last Answer : c.[3.75 4.75 6.75]

During the execution of a CNC part program block NO20 GO2 X45.0 Y25.0 R5.0the type of tool motion will be a.circular Interpolation – clockwise b.circular Interpolation – counter clockwise c.linear Interpolation d.rapid feed

Description : During the execution of a CNC part program block NO20 GO2 X45.0 Y25.0 R5.0the type of tool motion will be a.circular Interpolation – clockwise b.circular Interpolation – counter clockwise c.linear Interpolation d.rapid feed

Last Answer : a.circular Interpolation – clockwise

Two lines are parallel when a.P1 X P2=0 b.P1 . P2=0 c.P1 = P2 d.P1+ P2=0

Description : Two lines are parallel when a.P1 X P2=0 b.P1 . P2=0 c.P1 = P2 d.P1+ P2=0

Last Answer : a.P1 X P2=0

The curve is defined as the locus of a point moving with _ degree of freedom a.0 b.1 c.2 d.3

Description : The curve is defined as the locus of a point moving with _ degree of freedom a.0 b.1 c.2 d.3

Last Answer : b.1

Reflection about the line y=0, the axis, is accomplished with the transformationmatrix with how many elements as ‘0’? a.8 b.9 c.4 d.6

Description : Reflection about the line y=0, the axis, is accomplished with the transformationmatrix with how many elements as ‘0’? a.8 b.9 c.4 d.6

Last Answer : d.6

What is the determinant of the pure reflection matrix? a.1 b.0 c.-1 d.2

Description : What is the determinant of the pure reflection matrix? a.1 b.0 c.-1 d.2

Last Answer : c.-1

For 2D transformation the value of third coordinate i.e. w (or h) =? a.1 b.0 c.-1 d.Any value

Description : For 2D transformation the value of third coordinate i.e. w (or h) =? a.1 b.0 c.-1 d.Any value

Last Answer : a.1

Which one of the process is subtractive prototyping? a.5 axis CNC Milling b.Fused Deposition Modeling c.Multi-Jet Modeling d.Stereolithography Apparatus

Description : Which one of the process is subtractive prototyping? a.5 axis CNC Milling b.Fused Deposition Modeling c.Multi-Jet Modeling d.Stereolithography Apparatus

Last Answer : a.5 axis CNC Milling

In a CAD package, mirror image of a 2D point P (5, 10) is to be obtained about a line whichpasses through the origin and makes an angle of 45° counterclockwise with the X-axis. The coordinates of the transformed point will be a.(7.5, 5) b.(10, 5) c.(7.5, -5) d.(10, -5)

Description : In a CAD package, mirror image of a 2D point P (5, 10) is to be obtained about a line whichpasses through the origin and makes an angle of 45° counterclockwise with the X-axis. The coordinates of the transformed point will be a.(7.5, 5) b.(10, 5) c.(7.5, -5) d.(10, -5)

Last Answer : b.(10, 5)

In how many ways CNC machine tool systems can be classified? a.2 b.3 c.4 d.5

Description : In how many ways CNC machine tool systems can be classified? a.2 b.3 c.4 d.5

Last Answer : b.3

The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the above mentioned operation? a.N010 GO2 X10 Y10 X5 Y5 R5 b.N010 GO3 X10 Y10 X5 Y5 R5 c.N010 GO1 X5 Y5 X10 Y10 R5 d.N010 GO2 X5 Y5 X10 Y10 R5

Description : The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the ... b.N010 GO3 X10 Y10 X5 Y5 R5 c.N010 GO1 X5 Y5 X10 Y10 R5 d.N010 GO2 X5 Y5 X10 Y10 R5

Last Answer : a.N010 GO2 X10 Y10 X5 Y5 R5

How many nodes are there in a tetrahedron element? a.3 b.4 c.5 d.6

Description : How many nodes are there in a tetrahedron element? a.3 b.4 c.5 d.6

Last Answer : b.4

A triangular plane stress element has how many degrees of freedom? a.3 b.4 c.5 d.6

Description : A triangular plane stress element has how many degrees of freedom? a.3 b.4 c.5 d.6

Last Answer : d.6

Find parametric equation for Y-coordinates of Hermite cubic spline curve having endpoints P0[4,4]; P1[8,5] a.2u3-3u2+2u+4 b.3u3-2u2-2u-4 c.2u3-3u2-2u-4 d.2u3+3u2+2u+4

Description : Find parametric equation for Y-coordinates of Hermite cubic spline curve having endpoints P0[4,4]; P1[8,5] a.2u3-3u2+2u+4 b.3u3-2u2-2u-4 c.2u3-3u2-2u-4 d.2u3+3u2+2u+4

Last Answer : a.2u3-3u2+2u+4

Find parametric equation for X-coordinates of hermite cubic spline curve having endpoints P0[4,4]; P1[8,5] a.-5u3+8u2+u+1 b.5u3+8u2+u+1 c.8u3-5u2-u+1 d.8u3+5u2+u+1

Description : Find parametric equation for X-coordinates of hermite cubic spline curve having endpoints P0[4,4]; P1[8,5] a.-5u3+8u2+u+1 b.5u3+8u2+u+1 c.8u3-5u2-u+1 d.8u3+5u2+u+1

Last Answer : a.-5u3+8u2+u+1

For Q 51, find radius of circle a.3 b.3.6 c.4 d.3.5

Description : For Q 51, find radius of circle a.3 b.3.6 c.4 d.3.5

Last Answer : b.3.6

A circle is represented by center point [5,5] and radius 6 units. Find the parametricequation of circle and determine the various points on circle in first quadrant if increment in angle by 45o a.9.24,9.24 b.9.42,9.42 c.9,9 d.11,5

Description : A circle is represented by center point [5,5] and radius 6 units. Find the parametricequation of circle and determine the various points on circle in first quadrant if increment in angle by 45o a.9.24,9.24 b.9.42,9.42 c.9,9 d.11,5

Last Answer : a.9.24,9.24

Find the tangent vector of line having end points P1(3,5,8) and P2 (6,4,3) a.3i+j-5k b.3i-j-5k c.3i-j+5k d.-3i-j-5k

Description : Find the tangent vector of line having end points P1(3,5,8) and P2 (6,4,3) a.3i+j-5k b.3i-j-5k c.3i-j+5k d.-3i-j-5k

Last Answer : b.3i-j-5k

Write parametric equation of line having end points P1(3,5,8) and P2 (6,4,3). a.[3 5 8]+u[3 -1 -5] b.[3 5 8]+u[3 1 5] c.[3 8 5]+u[3 -1 -5] d.[3 5 8]+u[-3 1 5]

Description : Write parametric equation of line having end points P1(3,5,8) and P2 (6,4,3). a.[3 5 8]+u[3 -1 -5] b.[3 5 8]+u[3 1 5] c.[3 8 5]+u[3 -1 -5] d.[3 5 8]+u[-3 1 5]

Last Answer : a.[3 5 8]+u[3 -1 -5]

The number of non-coincidental points required to define the simplest surface are a.4 b.3 c.2 d.5

Description : The number of non-coincidental points required to define the simplest surface are a.4 b.3 c.2 d.5

Last Answer : b.3

In a 2-D CAD package, clockwise circular arc of radius, 5, specified from P1 (15,10)to P2 (10,15)will have its center at a.(10, 10) b.(15, 10) c.(15, 15) d.(10, 15)

Description : In a 2-D CAD package, clockwise circular arc of radius, 5, specified from P1 (15,10)to P2 (10,15)will have its center at a.(10, 10) b.(15, 10) c.(15, 15) d.(10, 15)

Last Answer : a.(10, 10)