What is the full form of ATC? a.Automatic tool changer b.Arranged tool changer c.Automatic tool controller d.Arranged tool controller

What is the full form of ATC? a.Automatic tool changer b.Arranged tool changer c.Automatic tool controller d.Arranged tool controller
by

1 Answer

Answer :

a.Automatic tool changer
by

Related questions

In the CNC machine which device used to hold the workpiece? a.Automatic pallet changer b.Automatic work part positioner c.A & B both d.None of the above

Description : In the CNC machine which device used to hold the workpiece? a.Automatic pallet changer b.Automatic work part positioner c.A & B both d.None of the above

Last Answer : c.A & B both

Automatic tool change in CNC Machine code a.M05 b.M06 c.M07 d.M09

Description : Automatic tool change in CNC Machine code a.M05 b.M06 c.M07 d.M09

Last Answer : b.M06

How many maximum tools can ATC hold? a.60 b.80 c.90 d.100

Description : How many maximum tools can ATC hold? a.60 b.80 c.90 d.100

Last Answer : b.80

What is the full form of AS/RS in FMS? a.Automated storage and recovery system b.Automatic storage and rotary system c.Automated storage and retrieval system d.Automated storage and regenerative system

Description : What is the full form of AS/RS in FMS? a.Automated storage and recovery system b.Automatic storage and rotary system c.Automated storage and retrieval system d.Automated storage and regenerative system

Last Answer : c.Automated storage and retrieval system

From the following what is the full form of AGV? a.Automatic Guided Vehicle b.Automated Gas Vehicle c.Automated Guided Vehicle d.None of the above

Description : From the following what is the full form of AGV? a.Automatic Guided Vehicle b.Automated Gas Vehicle c.Automated Guided Vehicle d.None of the above

Last Answer : c.Automated Guided Vehicle

If all the processing equipment and machines are arranged according to the sequence ofoperations of a product the layout is known as a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Description : If all the processing equipment and machines are arranged according to the sequence ofoperations of a product the layout is known as a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : a.Product layout

From the following in which FMS layout workstations are arranged in a loop with rungs a.Ladder layout b.Open field layout c.Loop layout d.None of the above

Description : From the following in which FMS layout workstations are arranged in a loop with rungs a.Ladder layout b.Open field layout c.Loop layout d.None of the above

Last Answer : a.Ladder layout

From the following in which FMS layout workstations are arranged in a loop a.Ladder layout b.In line layout c.Loop layout d.None of the above

Description : From the following in which FMS layout workstations are arranged in a loop a.Ladder layout b.In line layout c.Loop layout d.None of the above

Last Answer : c.Loop layout

Which of the following is not the method of part family formation a.Visual inspection method b.Automatic product sorting c.Parts classification & coding d.Production flow analysis

Description : Which of the following is not the method of part family formation a.Visual inspection method b.Automatic product sorting c.Parts classification & coding d.Production flow analysis

Last Answer : b.Automatic product sorting

From which of the following is not the main element of Flexible manufacturing system a.Work handling system b.Material handling system c.Tool handling system d.Main frame computer

Description : From which of the following is not the main element of Flexible manufacturing system a.Work handling system b.Material handling system c.Tool handling system d.Main frame computer

Last Answer : a.Work handling system

From the following which is not the application of AGV. a.Truck loading and unloading b.To change the tool c.Material transfer d.Paper roll transfer

Description : From the following which is not the application of AGV. a.Truck loading and unloading b.To change the tool c.Material transfer d.Paper roll transfer

Last Answer : b.To change the tool

Among the following, which one is the earliest step in Data Processing for RapidPrototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Description : Among the following, which one is the earliest step in Data Processing for RapidPrototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Last Answer : b.Part orientation

Among the following, which one is the last step in Data Processing for Rapid Prototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Description : Among the following, which one is the last step in Data Processing for Rapid Prototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Last Answer : c.Tool path generation

In laminated object manufacturing (LOM), which of the following cutting strategy ispreferable? a.Directional scanning b.Zigzag tool paths c.Contouring and spiral paths d.Boundary cutting tool paths

Description : In laminated object manufacturing (LOM), which of the following cutting strategy ispreferable? a.Directional scanning b.Zigzag tool paths c.Contouring and spiral paths d.Boundary cutting tool paths

Last Answer : d.Boundary cutting tool paths

The lost motion in CNC machine tool is on account of a.Backlash in gearing b.Wind-up of drive shafts c.Deflection of machine tool members d.All the above

Description : The lost motion in CNC machine tool is on account of a.Backlash in gearing b.Wind-up of drive shafts c.Deflection of machine tool members d.All the above

Last Answer : a.Backlash in gearing

The machine tool, in which calculation and setting of the operating conditions like depth ofcut, feed, speed are done during the machining by the control system itself, is called a.Computer Numerical Control System b.Direct Numerical Control System c.Machining Center System d.Adaptive Control System

Description : The machine tool, in which calculation and setting of the operating conditions like depth ofcut, feed, speed are done during the machining by the control system itself, is called a.Computer Numerical Control System b.Direct Numerical Control System c.Machining Center System d.Adaptive Control System

Last Answer : d.Adaptive Control System

In CNC machining tool radius compensation turning the left mode ON programming contourdone by a.G40 b.G41 c.G42 d.G43

Description : In CNC machining tool radius compensation turning the left mode ON programming contourdone by a.G40 b.G41 c.G42 d.G43

Last Answer : b.G41

The distance of a given tool tip from the surface of workpiece is known as….. a.Tool length b.Tool length offset H c.Cutter radius d.Compensation

Description : The distance of a given tool tip from the surface of workpiece is known as….. a.Tool length b.Tool length offset H c.Cutter radius d.Compensation

Last Answer : b.Tool length offset H

In the lathe it is the peripheral speed of the work piece cutting speed of tool is expressed inm/min, V is a.= 𝜋𝐷𝑁/1000 b.= 𝜋𝐷/1000 c.= 𝐷𝑁/1000 d.=𝜋𝐷𝑁/10

Description : In the lathe it is the peripheral speed of the work piece cutting speed of tool is expressed inm/min, V is a.= 𝜋𝐷𝑁/1000 b.= 𝜋𝐷/1000 c.= 𝐷𝑁/1000 d.=𝜋𝐷𝑁/10

Last Answer : a.= 𝜋𝐷𝑁/1000

A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre

Description : A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre

Last Answer : d.Line Joining Chuck centre & tail stock centre

In how many ways CNC machine tool systems can be classified? a.2 b.3 c.4 d.5

Description : In how many ways CNC machine tool systems can be classified? a.2 b.3 c.4 d.5

Last Answer : b.3

he depth that the tool is plunged into the surface is called as a.feed b.depth of cut c.depth of tool d.working depth

Description : he depth that the tool is plunged into the surface is called as a.feed b.depth of cut c.depth of tool d.working depth

Last Answer : b.depth of cut

The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the above mentioned operation? a.N010 GO2 X10 Y10 X5 Y5 R5 b.N010 GO3 X10 Y10 X5 Y5 R5 c.N010 GO1 X5 Y5 X10 Y10 R5 d.N010 GO2 X5 Y5 X10 Y10 R5

Description : The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the ... b.N010 GO3 X10 Y10 X5 Y5 R5 c.N010 GO1 X5 Y5 X10 Y10 R5 d.N010 GO2 X5 Y5 X10 Y10 R5

Last Answer : a.N010 GO2 X10 Y10 X5 Y5 R5

n an NC machining operation, the tool has to be moved from point (5, 4) to point (7, 2) alonga circular path with centre at (5, 2). Before starting the operation, the tool is at (5, 4). The G and N codes for this motion are a.N010 GO3 X7.0 Y2.0 I5.0 J2.0 b.N010 GO2 X7.0 Y2.0 I5.0 J2.0 c.N010 GO1 X7.0 Y2.0 I5.0 J2.0 d.N010 GOO X7.0 Y2.0 I5.0 J2.0

Description : n an NC machining operation, the tool has to be moved from point (5, 4) to point (7, 2) alonga circular path with centre at (5, 2). Before starting the operation, the tool is at (5, 4). The G and N codes for this motion ... 0 I5.0 J2.0 c.N010 GO1 X7.0 Y2.0 I5.0 J2.0 d.N010 GOO X7.0 Y2.0 I5.0 J2.0

Last Answer : b.N010 GO2 X7.0 Y2.0 I5.0 J2.0

During the execution of a CNC part program block NO20 GO2 X45.0 Y25.0 R5.0the type of tool motion will be a.circular Interpolation – clockwise b.circular Interpolation – counter clockwise c.linear Interpolation d.rapid feed

Description : During the execution of a CNC part program block NO20 GO2 X45.0 Y25.0 R5.0the type of tool motion will be a.circular Interpolation – clockwise b.circular Interpolation – counter clockwise c.linear Interpolation d.rapid feed

Last Answer : a.circular Interpolation – clockwise

A cylinder can be created by drawing a rectangular shape using the ________ tool. a.revolve b.sweep c.extrude d.all of the above

Description : A cylinder can be created by drawing a rectangular shape using the ________ tool. a.revolve b.sweep c.extrude d.all of the above

Last Answer : a.revolve

Full form of MJM is______ a.Multi Joint Modelling b.Multi Jet Modelling c.Muted Jet Modelling d.Mitred Jet Modelling

Description : Full form of MJM is______ a.Multi Joint Modelling b.Multi Jet Modelling c.Muted Jet Modelling d.Mitred Jet Modelling

Last Answer : b.Multi Jet Modelling

Full form of FDM is_______ a.Fixed Development Modelling b.Fusion Development Modelling c.Fused Deposition Modelling d.Focused Deposition Modelling

Description : Full form of FDM is_______ a.Fixed Development Modelling b.Fusion Development Modelling c.Fused Deposition Modelling d.Focused Deposition Modelling

Last Answer : c.Fused Deposition Modelling

Full form of STL is _____ a.Straight-lithography b.Streto-lithography c.Stereo-lithography d.Straight-lipsography

Description : Full form of STL is _____ a.Straight-lithography b.Streto-lithography c.Stereo-lithography d.Straight-lipsography

Last Answer : c.Stereo-lithography

Full form of MCU is………… a.Machine computer unit b.Machine control universal c.Machine control unit d.None of the above

Description : Full form of MCU is………… a.Machine computer unit b.Machine control universal c.Machine control unit d.None of the above

Last Answer : c.Machine control unit

What is the full form of FEA a.Fracture Element Analysis b.Finite Element Analysis c.Future Electronic Analysis d.None of the above

Description : What is the full form of FEA a.Fracture Element Analysis b.Finite Element Analysis c.Future Electronic Analysis d.None of the above

Last Answer : b.Finite Element Analysis

Increase the output of work per unit time c) Automatic tool. c) manual tool d) Implement tool. d) matching tool

Description : Increase the output of work per unit time c) Automatic tool. c) manual tool d) Implement tool. d) matching tool

Last Answer : manual tool

The person having overall responsibility of an aircraft during flight is the: a. Pilot in command b. Operator c. ATC controller if the aircraft is in controlled airspace d. Owner of the aircraft

Description : The person having overall responsibility of an aircraft during flight is the: a. Pilot in command b. Operator c. ATC controller if the aircraft is in controlled airspace d. Owner of the aircraft

Last Answer : a. Pilot in command

The person having overall responsibility of an aircraft during flight is the: a. Pilot in command b. Operator c. ATC controller if the aircraft is in controlled airspace d. Owner of the aircraft

Description : The person having overall responsibility of an aircraft during flight is the: a. Pilot in command b. Operator c. ATC controller if the aircraft is in controlled airspace d. Owner of the aircraft

Last Answer : a. Pilot in command

Form code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow

Description : Form code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow

Last Answer : a.Design attributes

The last four digits of the Opitz classification system are ______ a.Form code b.Secondary code c.Supplementary code d.Stationary code

Description : The last four digits of the Opitz classification system are ______ a.Form code b.Secondary code c.Supplementary code d.Stationary code

Last Answer : b.Secondary code

The middle four digits of the Opitz classification system are ______ a.Form code b.Secondary code c.Supplementary code d.Stationary code

Description : The middle four digits of the Opitz classification system are ______ a.Form code b.Secondary code c.Supplementary code d.Stationary code

Last Answer : c.Supplementary code

The first five digits of the Opitz classification system are ______ a.Form code b.Secondary code c.Supplementary code d.Stationary code

Description : The first five digits of the Opitz classification system are ______ a.Form code b.Secondary code c.Supplementary code d.Stationary code

Last Answer : a.Form code

Form which of the following is the objective of cellular manufacturing. a.Reduced manufacturing lead time b.Increased in quality c.Reduced setup time d.All of the above

Description : Form which of the following is the objective of cellular manufacturing. a.Reduced manufacturing lead time b.Increased in quality c.Reduced setup time d.All of the above

Last Answer : d.All of the above

From the following in which coding method supplementary code and form code are used? a.KK3 system b.The MICLASS system c.OPITZ coding system d.The DICLASS system

Description : From the following in which coding method supplementary code and form code are used? a.KK3 system b.The MICLASS system c.OPITZ coding system d.The DICLASS system

Last Answer : c.OPITZ coding system

In the process of Selective Laser Sintering, raw material used is in the form of ______ a.machining wax b.foam core c.powder d.rubber

Description : In the process of Selective Laser Sintering, raw material used is in the form of ______ a.machining wax b.foam core c.powder d.rubber

Last Answer : c.powder

Which of the process, the input material is in powder form? a.LOM b.SLS c.FDM d.MJM

Description : Which of the process, the input material is in powder form? a.LOM b.SLS c.FDM d.MJM

Last Answer : b.SLS

Which of the process, the input material is in liquid form? a.LOM b.SLS c.FDM d.MJM

Description : Which of the process, the input material is in liquid form? a.LOM b.SLS c.FDM d.MJM

Last Answer : d.MJM

From the following, in which process, the input material is in solid form? a.SLA b.SLS c.FDM d.MJM

Description : From the following, in which process, the input material is in solid form? a.SLA b.SLS c.FDM d.MJM

Last Answer : c.FDM

__________ is one where mechanical forces or restricting forms are applied on a material so asto form it into the desired shape a.Subtractive process b.Additive process c.Formative process d.All of above

Description : __________ is one where mechanical forces or restricting forms are applied on a material so asto form it into the desired shape a.Subtractive process b.Additive process c.Formative process d.All of above

Last Answer : c.Formative process

The ___________ is used to create a surface using curves that form closed boundaries a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution

Description : The ___________ is used to create a surface using curves that form closed boundaries a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution

Last Answer : c.coons patch

Which of the following is not a method to describe a curve mathematically? a.Explicit form b.Laplace form c.Implicit form d.Parametric form

Description : Which of the following is not a method to describe a curve mathematically? a.Explicit form b.Laplace form c.Implicit form d.Parametric form

Last Answer : b.Laplace form

The is used to create a surface using curves that form closed boundaries. a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution

Description : The is used to create a surface using curves that form closed boundaries. a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution

Last Answer : c.coons patch

The two-dimensional translation equation in the matrix form is a.P’=P+T b.P’=P-T c.P’=P*T d.P’=P

Description : The two-dimensional translation equation in the matrix form is a.P’=P+T b.P’=P-T c.P’=P*T d.P’=P

Last Answer : a.P’=P+T

The two-dimensional rotation equation in the matrix form is a.P’=T+P b.P’=S*P c.P’=R*P d.P’=dx+dy

Description : The two-dimensional rotation equation in the matrix form is a.P’=T+P b.P’=S*P c.P’=R*P d.P’=dx+dy

Last Answer : c.P’=R*P