Increase the output of work per unit time c) Automatic tool. c) manual tool d) Implement tool. d) matching tool

Increase the output of work per unit time c) Automatic tool. c) manual tool d) Implement tool. d) matching tool
by

1 Answer

Answer :

manual tool

by

Related questions

Should the rev matching feature on the Nissan 370Z's manual gearbox have been put on the automatic instead? Why?

Description : Should the rev matching feature on the Nissan 370Z's manual gearbox have been put on the automatic instead? Why?

Last Answer : What do you mean? Syncro-mesh? That’s not exactly an exotic feature, and why would an automatic need it?

is pulled and guided from single hitch point but its weight is not supported by the tractor. A. Trailed type implement C. Semi mounted type implemented B. Mounted type implemented D. Automatic implemented

Description : is pulled and guided from single hitch point but its weight is not supported by the tractor. A. Trailed type implement C. Semi mounted type implemented B. Mounted type implemented D. Automatic implemented

Last Answer : Trailed type implement

is a combination of rigid or resistant Bodies having definite motion and capable of performing useful work a) Tool. c) Implement b) Machine. d) None of the above

Description : is a combination of rigid or resistant Bodies having definite motion and capable of performing useful work a) Tool. c) Implement b) Machine. d) None of the above

Last Answer : Machine.

Objectives of Tillage a. To destroy the prevent weeds. c) both A & B b. To reduce soil and erosion d) increase the output of work per unit time

Description : Objectives of Tillage a. To destroy the prevent weeds. c) both A & B b. To reduce soil and erosion d) increase the output of work per unit time

Last Answer : both A & B

What is the full form of ATC? a.Automatic tool changer b.Arranged tool changer c.Automatic tool controller d.Arranged tool controller

Description : What is the full form of ATC? a.Automatic tool changer b.Arranged tool changer c.Automatic tool controller d.Arranged tool controller

Last Answer : a.Automatic tool changer

Automatic tool change in CNC Machine code a.M05 b.M06 c.M07 d.M09

Description : Automatic tool change in CNC Machine code a.M05 b.M06 c.M07 d.M09

Last Answer : b.M06

The primary objective of energy audit is to determine ways to ______ energy consumption per unit of product output. A. Increase. C) Slightly increase. B. Reduce. D) Change.

Description : The primary objective of energy audit is to determine ways to ______ energy consumption per unit of product output. A. Increase. C) Slightly increase. B. Reduce. D) Change.

Last Answer : reduce

Some organizations have escalator clause in their labour agreements. What does this clause provide for ? (A) Automatic increase in wage/salary depending on seniority (B) Wage increase depending on output per day by the worker (C) Automatic increase in wage/salary depending upon increase in price index (D) Automatic increase in wage/salary depending on increase in profits of the firm

Description : Some organizations have escalator clause in their labour agreements. What does this clause provide for ? (A) Automatic increase in wage/salary depending on seniority (B) Wage increase depending on output ... index (D) Automatic increase in wage/salary depending on increase in profits of the firm

Last Answer : Answer: Automatic increase in wage/salary depending on increase in profits of the firm

The type of restrained three point linkage system in which the depth of implement is automatically adjusted to maintain a pre selected constant draft is called : E. Automatic draft control system F. Precision control system G. Depth control system H. None of the above

Description : The type of restrained three point linkage system in which the depth of implement is automatically adjusted to maintain a pre selected constant draft is called : E. Automatic draft control system F. Precision control system G. Depth control system H. None of the above

Last Answer : E. Automatic draft control system

What is the difference between manual and automatic feed during turning

Description : Is not asked

Last Answer : In manual feed turning, the operator manually controls the feed rate of the cutting tool by turning a handwheel or other manual feed mechanism. This allows the operator to adjust the feed rate ... hand, is generally faster and more consistent, but it requires more complex equipment and programming.

How to check that the watch is automatic or manual?

Description : How to check that the watch is automatic or manual?

Last Answer : To check the clock is automatic or manual. checking for text imprinted on its dial of case back. but there are also visual cues. If you observe the actual movements of watch, automatic movements are jumpier and move once every second while manual have a smooth sweeping motion.

Does the STI WRX come in both manual and automatic transmission?

Description : Does the STI WRX come in both manual and automatic transmission?

Last Answer : The STI, which is a version of the Subaru Impreza WRX, only comes with manual transmission. The normal Impreza WRX does come in both versions, just not the STI model

Does the manual Express Machine have the ability to make as much Express as the Super-Automatic?

Description : Does the manual Express Machine have the ability to make as much Express as the Super-Automatic?

Last Answer : Manual Express espresso machines tend to have 3 to 6 cup capacities, while Super-Automatic machines can typically brew 7 to 8 cups.

What does it mean when a freezer says Manual Defrost and Automatic Defrost?

Description : What does it mean when a freezer says Manual Defrost and Automatic Defrost?

Last Answer : Manual defrost is the instructions for you to manually defrost your freezer and automatic defrost is saying the freezer defrost on it's own.

The device labeled 'REG SW' in the illustration is used to ___________. EL-0003 A. shift from the automatic voltage regulator to the manual voltage regulator B. shift the governor control from manual to automatic/zero droop C. enable the operator to read the field voltage on device 'REG ADJ' or device 'MAN ADJ' D. supply regulated control power to the switchboard

Description : The device labeled 'REG SW' in the illustration is used to ___________. EL-0003 A. shift from the automatic voltage regulator to the manual voltage regulator B. shift the governor control from manual to ... device 'REG ADJ' or device 'MAN ADJ' D. supply regulated control power to the switchboard

Last Answer : Answer: A

What is an advantage of using bid rules? A. Full automation of your bidding B. Automation of your manual bid process C. Automatic application of phone call data to your bidding D. Receive bid assistance based upon the likelihood of a conversi

Description : What is an advantage of using bid rules? A. Full automation of your bidding B. Automation of your manual bid process C. Automatic application of phone call data to your bidding D. Receive bid assistance based upon the likelihood of a conversi

Last Answer : B. Automation of your manual bid process

Which of the following statement is true about virtualization technology? A. Allows manual provisioning of environments. B. Administrationsoftware constantly monitors the software. C. Save energy by powering off the servers. D. Allows automatic deployment of applications.

Description : Which of the following statement is true about virtualization technology? A. Allows manual provisioning of environments. B. Administrationsoftware constantly monitors the software. C. Save energy by powering off the servers. D. Allows automatic deployment of applications.

Last Answer : Allows automatic deployment of applications.

The deliberate action of the government to stabilize the economy, as opposed to the inherent automatic stabilizing properties of the fiscal system, is known as a) Forced fiscal policy b) Manual fiscal policy c) Discretionary fiscal policy d) Automatic fiscal policy

Description : The deliberate action of the government to stabilize the economy, as opposed to the inherent automatic stabilizing properties of the fiscal system, is known as a) Forced fiscal policy b) Manual fiscal policy c) Discretionary fiscal policy d) Automatic fiscal policy

Last Answer : c) Discretionary fiscal policy

What is the difference between a manual and an automatic switch?

Description : What is the difference between a manual and an automatic switch?

Last Answer : A manual switch must be turned on or off by a person. An automatic switch turns a circuit on or off without the action of a person

Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : B) Static allocation

Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : B) Static allocation

Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : A) Automatic allocation

Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : B) Static allocation

A tool for locating information on the Internet by matching search terms with indexed pages is called

Description : A tool for locating information on the Internet by matching search terms with indexed pages is called  (1) URL (2) Search Engine (3) Web Browser (4) Data base  

Last Answer : URL

The strategy of adjusting and optimising energy using systems and procedures so as to reduce energy requirements per unit of output while holding constant or reducing total cost of producing the output from the systems is…………. a) Energy Management b) Energy audit c) Energy utilisation d) Energy wastage

Description : The strategy of adjusting and optimising energy using systems and procedures so as to reduce energy requirements per unit of output while holding constant or reducing total cost of producing the output from the ... is . a) Energy Management b) Energy audit c) Energy utilisation d) Energy wastage

Last Answer : Energy Management

Forces which a tool must overcome in cutting, breaking and moving the soil is called a) Useful soil resistance b) Parasitic force c) Draft of implement d) Pull of implement

Description : Forces which a tool must overcome in cutting, breaking and moving the soil is called a) Useful soil resistance b) Parasitic force c) Draft of implement d) Pull of implement

Last Answer : a) Useful soil resistance

The waste heat recovery unit (WHRU) is a tool involved in _______. a) Regeneration b) Cogeneration c) Both ‘a’ and ‘b’ d) None of the above

Description : The waste heat recovery unit (WHRU) is a tool involved in _______. a) Regeneration b) Cogeneration c) Both ‘a’ and ‘b’ d) None of the above

Last Answer : Cogeneration

31. Replacement of steam based hot water generation by solar system is an example of a) Matching energy usage to the requirement b) Maximising system efficiency c) Energy substitution d) Performance improvement

Description : Replacement of steam based hot water generation by solar system is an example of a) Matching energy usage to the requirement b) Maximising system efficiency c) Energy substitution d) Performance improvement

Last Answer : Energy substitution

Identify type of BJT configuration having following features : (i) BJT configuration having the least current gain. (ii) KIT configuration called as voltage follower. (iii) BJT configuration having current gain less than one. (iv) BJT configuration suitable for impedance matching. (v) BIT configuration suitable for voltage amplification. (vi) BJT configuration having the least output impedance.

Description : Identify type of BJT configuration having following features : (i) BJT configuration having the least current gain. (ii) KIT configuration called as voltage follower. (iii) BJT ... configuration suitable for voltage amplification. (vi) BJT configuration having the least output impedance.  

Last Answer : (i) BJT configuration having the least current gain : Common Base Configuration  (ii) KIT configuration called as voltage follower: Common Collector Configuration  (iii) BJT ... Emitter Configuration  (vi) BJT configuration having the least output impedance: Common Collector Configuration

ART (Automatic Reasoning Tool) is designed to be used on __________ a) LISP machines b) Personal computers c) Microcomputers d) All of the mentioned

Description : ART (Automatic Reasoning Tool) is designed to be used on __________ a) LISP machines b) Personal computers c) Microcomputers d) All of the mentioned

Last Answer : a) LISP machines

The third type of comment is used by a tool called .................. for automatic generation of documentation. A) Java commenting B) Java generator C) Java doc D) Java loc

Description : The third type of comment is used by a tool called .................. for automatic generation of documentation. A) Java commenting B) Java generator C) Java doc D) Java loc

Last Answer : C) Java doc

Which rule implement for axes Nomenclature? a.Left-hand rule b.Right-Hand Rule c.Thumb Rule d.None of the above

Description : Which rule implement for axes Nomenclature? a.Left-hand rule b.Right-Hand Rule c.Thumb Rule d.None of the above

Last Answer : b.Right-Hand Rule

The draft of a trailed type implement can be measured using a) Brake dynamometer b) Torque meter c) Tension dynamometer d) Dial gauge

Description : The draft of a trailed type implement can be measured using a) Brake dynamometer b) Torque meter c) Tension dynamometer d) Dial gauge Ans. c

Last Answer : Ans. c

Shortening of top link of tractor three-point hitch system a) Increases weight transfer on rear wheels b) Decreases weight transfer on rear wheels c) Increases penetration of implement d) Decreases penetration of implement Ans. d

Description : Shortening of top link of tractor three-point hitch system a) Increases weight transfer on rear wheels b) Decreases weight transfer on rear wheels c) Increases penetration of implement d) Decreases penetration of implement Ans. d

Last Answer :  Ans. d

Weight transfer in a tractor in a tractor implement system is caused by 1. Application of pull 2. Tractor force 3. Tractor slip 4. Weight of operator

Description : Weight transfer in a tractor in a tractor implement system is caused by 1. Application of pull 2. Tractor force 3. Tractor slip 4. Weight of operator

Last Answer : ans 1

It is intercultural implement used for removing shallow rooted weeds in between crop rows. a. Cono weeder b. Junior hoe d. None of above

Description : It is intercultural implement used for removing shallow rooted weeds in between crop rows. a. Cono weeder b. Junior hoe d. None of above

Last Answer : Ans- c. Sweep

is implement for churning the soil with water. a. Mixer b. Cultivator d. None of the above

Description : is implement for churning the soil with water. a. Mixer b. Cultivator d. None of the above

Last Answer : Ans - c. Puddler

Harrow is a tillage implement that cuts the soil to shallow depth for smoothening and pulverizing the soil as well as to cut weeds and to mix the materials with the soil. a. Primary. c. Tertiary b. Secondary. d. None

Description : Harrow is a tillage implement that cuts the soil to shallow depth for smoothening and pulverizing the soil as well as to cut weeds and to mix the materials with the soil. a. Primary. c. Tertiary b. Secondary. d. None

Last Answer : Secondary

Weight transfer in a tractor in a tractor implement system is caused by A. Application of Pull. B. Tractor force C. Tractor slip. D. Weight of operator

Description : Weight transfer in a tractor in a tractor implement system is caused by A. Application of Pull. B. Tractor force C. Tractor slip. D. Weight of operator

Last Answer : Application of Pull

Harrow is secondary tillage implement used to cut soil to shallow depth for _ and A) smoothening. C) none of the above B) pulverizing. D) both

Description : Harrow is secondary tillage implement used to cut soil to shallow depth for _ and A) smoothening. C) none of the above B) pulverizing. D) both

Last Answer : both 

An implement that pulled and guided by single hitch point of a tractor is: a) Trailed implement c) Mounted implement b) Semi mounted implements d) All are correct

Description : An implement that pulled and guided by single hitch point of a tractor is: a) Trailed implement c) Mounted implement b) Semi mounted implements d) All are correct

Last Answer : Trailed implement

In the CNC machine which device used to hold the workpiece? a.Automatic pallet changer b.Automatic work part positioner c.A & B both d.None of the above

Description : In the CNC machine which device used to hold the workpiece? a.Automatic pallet changer b.Automatic work part positioner c.A & B both d.None of the above

Last Answer : c.A & B both

Which one of the following statements is TRUE? a.Teach pendant is used for lead-through teaching. b.Teach pendant is used for manual teaching. c.Teach pendant is used for off-line teaching of robots. d.Teach pendant is not used in robot teaching.

Description : Which one of the following statements is TRUE? a.Teach pendant is used for lead-through teaching. b.Teach pendant is used for manual teaching. c.Teach pendant is used for off-line teaching of robots. d.Teach pendant is not used in robot teaching.

Last Answer : b.Teach pendant is used for manual teaching.

From which of the following is robot programming method a.Manual method b.Lead through method c.Walk through method d.All of the above

Description : From which of the following is robot programming method a.Manual method b.Lead through method c.Walk through method d.All of the above

Last Answer : d.All of the above

The _______ is aimed at appliances which have a constant usage andconsume more electricity. a. Electricity bill c. BEE Star Rating b. User manual d. Water bill

Description : The _______ is aimed at appliances which have a constant usage andconsume more electricity. a. Electricity bill c. BEE Star Rating b. User manual d. Water bill

Last Answer : BEE Star Rating

For consumers, _______ is helpful as it allows you to calculate the actual money you would spend in electricity bills for that particular product. a. Electricity bill c. BEE Star Rating b. User manual d. Water bill

Description : For consumers, _______ is helpful as it allows you to calculate the actual money you would spend in electricity bills for that particular product. a. Electricity bill c. BEE Star Rating b. User manual d. Water bill

Last Answer : BEE Star Rating

What are the advantages of using logical spool servers? Note: there are 2 correct answered to this question A. You can create more output devices B. You can balance the load across multiple physical spool servers C. You can minimize the load on physical devices D. You can minimize the manual adjustment of output device definitions after the transport

Description : What are the advantages of using logical spool servers? Note: there are 2 correct answered to this question A. You can create more output devices B. You can balance the load across ... on physical devices D. You can minimize the manual adjustment of output device definitions after the transport

Last Answer : B. You can balance the load across multiple physical spool servers C. You can minimize the load on physical devices

A contractor wishes to determine a suitable combination of manual labour and machine work for the excavation of a multistory construction. For every cum of excavation, 3 man-hours are needed; or 0.2 machine-hour. Costs involved are Rs. 20 per man-hour and Rs. 500 per machine-hour. The total quantity of excavation is estimated to be 4,000 cum. The optimal quantity of excavation to be done manually for minimum total cost will be (a) 1500 cum (b) 1800 cum (c) 2250 cum (d) 2500 cum

Description : A contractor wishes to determine a suitable combination of manual labour and machine work for the excavation of a multistory construction. For every cum of excavation, 3 man-hours are needed; or 0.2 machine-hour. Costs ... total cost will be (a) 1500 cum (b) 1800 cum (c) 2250 cum (d) 2500 cum

Last Answer : (d) 2500 cum

Expenses need to be recorded in the period in which the associated revenues are recognised. This is to be ensured as per which one of the following accounting principles ? (A) Revenue recognition (B) Cost benefit (C) Matching (D) Periodicity

Description : Expenses need to be recorded in the period in which the associated revenues are recognised. This is to be ensured as per which one of the following accounting principles ? (A) Revenue recognition (B) Cost benefit (C) Matching (D) Periodicity

Last Answer : Answer: Revenue recognition

As per the Matching concept, Revenue –? = Profit a) Expenses b) Liabilities c) Losses d) Assets

Description : As per the Matching concept, Revenue –? = Profit a) Expenses b) Liabilities c) Losses d) Assets

Last Answer : a) Expenses