Weight of steel crib 75x75x10mm angles a) 200kg b) 187.2kg* c) 210kg d) 185kg

Weight of steel crib 75x75x10mm angles
a) 200kg
b) 187.2kg*
c) 210kg
d) 185kg
by

1 Answer

Answer :

b) 187.2kg*
by

Related questions

CC Crib stands for a) Cement concrete b) Criss crossing c) Christ church* d) None of the above

Description : CC Crib stands for a) Cement concrete b) Criss crossing c) Christ church* d) None of the above

Last Answer : c) Christ church*

Theodolite is an instrument used for (a) Tightening the capstan-headed nuts of level tube (b) Measurement of horizontal angles only (c) Measurement of vertical angles only (d) Measurement of both horizontal and vertical angles*

Description : Theodolite is an instrument used for (a) Tightening the capstan-headed nuts of level tube (b) Measurement of horizontal angles only (c) Measurement of vertical angles only (d) Measurement of both horizontal and vertical angles*

Last Answer : (d) Measurement of both horizontal and vertical angles*

The average weight of a group of 22students is 34kg. When the weight of the staff is also included, the average weight increases by 2kg. What is the weight of the staff? A. 80 kgs B. 54 kgs C. 47 kgs D. 33kgs

Description : The average weight of a group of 22students is 34kg. When the weight of the staff is also included, the average weight increases by 2kg. What is the weight of the staff? A. 80 kgs B. 54 kgs C. 47 kgs D. 33kgs 

Last Answer : A) The average weight of a group of 22students = 34 kgs. Therefore, the total weight of the group = 22*34 = 748 kg When the weight of the staff is included, there are 23 individuals. The average ... , the total weight of the 22 students plus the staff = 23* 36= 828 828-748=80 kg.

A metallic tape is made of (a) Steel (b) Invar (c) Linen (d) Cloth & wires*

Description : A metallic tape is made of (a) Steel (b) Invar (c) Linen (d) Cloth & wires*

Last Answer : (d) Cloth & wires

Name the material which is separated from molten steel during chemical reaction of A.T welding? (i) Aluminium oxide (slag). * (ii) Ferrous Oxide (iii) Aluminium (iv) Ferrous

Description : Name the material which is separated from molten steel during chemical reaction of A.T welding? (i) Aluminium oxide (slag). * (ii) Ferrous Oxide (iii) Aluminium (iv) Ferrous

Last Answer : (i) Aluminium oxide (slag). *

How much rail ends are cleaned with Kerosene Oil and steel wire brush? (i) Minimum 100 mm both side (ii) Minimum 50 mm both side.* (iii) No need (iv) As decided by site supervisor

Description : How much rail ends are cleaned with Kerosene Oil and steel wire brush? (i) Minimum 100 mm both side (ii) Minimum 50 mm both side.* (iii) No need (iv) As decided by site supervisor

Last Answer : (ii) Minimum 50 mm both side.*

Greasing of bearings of Steel girder bridges is done once in years.

Description : Greasing of bearings of Steel girder bridges is done once in years.

Last Answer : Three

What is the clear distance between two consecutive steel channel sleepers on Girder bridges? (a) 450 mm* (b) 510 mm (c) 500 mm (d) 460 mm

Description : What is the clear distance between two consecutive steel channel sleepers on Girder bridges? (a) 450 mm* (b) 510 mm (c) 500 mm (d) 460 mm

Last Answer : (a) 450 mm*

Ultrasonic Pulse Velocity test is meant for a) Identifying the integrity of concrete* b) Finding the strength of concrete c) To know the crack in steel structure d) To know the flaw in rail

Description : Ultrasonic Pulse Velocity test is meant for a) Identifying the integrity of concrete* b) Finding the strength of concrete c) To know the crack in steel structure d) To know the flaw in rail

Last Answer : a) Identifying the integrity of concrete*

Minimum length of steel channel sleeper in BG a) 2500mm b) 2440mm* c) 2400mm d) 2600mm

Description : Minimum length of steel channel sleeper in BG a) 2500mm b) 2440mm* c) 2400mm d) 2600mm

Last Answer : b) 2440mm*

Corrosion in Steel girder bridges may be prevented by : a) Protective coatings by painting b) Metallising c) Use of epoxy based paints d) All the above*

Description : Corrosion in Steel girder bridges may be prevented by : a) Protective coatings by painting b) Metallising c) Use of epoxy based paints d) All the above*

Last Answer : d) All the above*

Renewal of slack rivets should be taken up in steel girder bridges: a) All rivets which are hand loose or which have lost 50% of their head by corrosion. b) All hammer loose rivets where corrosion has set in between the head and the plate. c) In end stiffeners when the percentage of hammer loose rivets is >30% d) All the above*

Description : Renewal of slack rivets should be taken up in steel girder bridges: a) All rivets which are hand loose or which have lost 50% of their head by corrosion. b) All hammer loose rivets where corrosion has set ... . c) In end stiffeners when the percentage of hammer loose rivets is >30% d) All the above*

Last Answer : d) All the above*

Entire steel work of girder bridge should be painted at regular interval; known as a) patch painting b) periodical through painting* c) Any of the above d) None of the above

Description : Entire steel work of girder bridge should be painted at regular interval; known as a) patch painting b) periodical through painting* c) Any of the above d) None of the above

Last Answer : b) periodical through painting*

tructural steel for railway loading above 0oC temperature conforms to -- a) IS 2062 grade A b) IS 2062 grade B* c) IS 2062 grade C d) None of the above

Description : tructural steel for railway loading above 0oC temperature conforms to -- a) IS 2062 grade A b) IS 2062 grade B* c) IS 2062 grade C d) None of the above

Last Answer : b) IS 2062 grade B*

The minimum pitch of rivets of diameter ‘d’ in steel plates shall be a) 2 x d b) 3 x d c) 1.75 x d d) 2.5 x d*

Description : The minimum pitch of rivets of diameter ‘d’ in steel plates shall be a) 2 x d b) 3 x d c) 1.75 x d d) 2.5 x d*

Last Answer : d) 2.5 x d*

The minimum edge distance for rivets of diameter ‘d’ in steel plates shall be a) 2 x d b) 3 x d c) 1.5 x d* d) 2.5 x d

Description : The minimum edge distance for rivets of diameter ‘d’ in steel plates shall be a) 2 x d b) 3 x d c) 1.5 x d* d) 2.5 x d

Last Answer : c) 1.5 x d*

S code for Steel structures is a) IS 236 b) IS 226 c) IS 456 d) IS 800*

Description : S code for Steel structures is a) IS 236 b) IS 226 c) IS 456 d) IS 800*

Last Answer : d) IS 800*

Steel channel sleepers are provided in bridges with superstructure of a) PSC slab b) PSC girder c) Steel girder* d) RCC Box

Description : Steel channel sleepers are provided in bridges with superstructure of a) PSC slab b) PSC girder c) Steel girder* d) RCC Box

Last Answer : c) Steel girder*

Camber in steel triangulated girder is provided to compensate for deflection a) Under live load and dead load* b) Under live load c) Under dead load d) None of the above

Description : Camber in steel triangulated girder is provided to compensate for deflection a) Under live load and dead load* b) Under live load c) Under dead load d) None of the above

Last Answer : a) Under live load and dead load*

The date of painting of steel work should be painted in white on the out side of the left girder a) of the 1st span only b) first span only but on all spans for Imp. Bridges* c) of the all spans d) None of the above

Description : The date of painting of steel work should be painted in white on the out side of the left girder a) of the 1st span only b) first span only but on all spans for Imp. Bridges* c) of the all spans d) None of the above

Last Answer : b) first span only but on all spans for Imp. Bridges*

Calculate damping ratio if mass = 200Kg, ω = 20rad/s and damping coefficient = 800 N/m/s A. 0.03 B. 0.04 C. 0.05 D. 0.06

Description : Calculate damping ratio if mass = 200Kg, ω = 20rad/s and damping coefficient = 800 N/m/s A. 0.03 B. 0.04 C. 0.05 D. 0.06

Last Answer : A. 0.03

Calculate damping ratio from the following data: mass = 200Kg ω = 20rad/s damping coefficient = 1000 N/m/s a) 0.03 b) 0.04 c) 0.05 d) 0.06

Description : Calculate damping ratio from the following data: mass = 200Kg ω = 20rad/s damping coefficient = 1000 N/m/s a) 0.03 b) 0.04 c) 0.05 d) 0.06

Last Answer : b) 0.04

Calculate damping ratio from the following data: mass = 200Kg ω = 20rad/s damping coefficient = 800 N/m/s a) 0.03 b) 0.04 c) 0.05 d) 0.06

Description : Calculate damping ratio from the following data: mass = 200Kg ω = 20rad/s damping coefficient = 800 N/m/s a) 0.03 b) 0.04 c) 0.05 d) 0.06

Last Answer : a) 0.03

Calculate critical damping coefficient in Ns/m from the following data. mass = 200Kg ω = 20rad/sa) 25,132 b) 26,132 c) 27,132 d) Not possible

Description : Calculate critical damping coefficient in Ns/m from the following data. mass = 200Kg ω = 20rad/sa) 25,132 b) 26,132 c) 27,132 d) Not possible

Last Answer : d) Not possible

The maximum quantity of aggregate per 50kg of cement should not axceed. (a) 100kg (b) 200kg (c) 350kg (d) 450kg

Description : The maximum quantity of aggregate per 50kg of cement should not axceed. (a) 100kg (b) 200kg (c) 350kg (d) 450kg

Last Answer : (d) 450kg

Standard quantity of material per unit 5KG. Standard Price Rs 5 per KG. actual number of units 400 units. Actual quantity 2,200KG and price of material Rs 4.80 per kg. Calculate material price. a) 100(F) b) 500(A) c) 440(F) d) 600(F)

Description : Standard quantity of material per unit 5KG. Standard Price Rs 5 per KG. actual number of units 400 units. Actual quantity 2,200KG and price of material Rs 4.80 per kg. Calculate material price. a) 100(F) b) 500(A) c) 440(F) d) 600(F)

Last Answer : The standard quantity of material per unit is 5KG, so the standard quantity for 400 units would be: Standard quantity = 5KG/unit x 400 units = 2000KG The standard price per KG is Rs 5, so the ... material cost was lower than the standard material cost. Option (c) is the correct answer: 440(F).

The immunoglobulin having highest molecular weight is (A) Ig G (B) Ig M (C) Ig E (D) Ig A MINERAL METABOLISM 187

Description : The immunoglobulin having highest molecular weight is (A) Ig G (B) Ig M (C) Ig E (D) Ig A MINERAL METABOLISM 187

Last Answer : Answer : B

What do you do with almost 2kg of matzot left from pessach?

Description : What do you do with almost 2kg of matzot left from pessach?

Last Answer : feed it to the birds.

Endurance 2kg PB bottle

Description : When I release a 2 kg propane bottle but fully in How long will it be emptied? Have you tried it on someone

Last Answer : Need Answer

What would you need to do to calculate the molarity of 0.2kg of nail in3kg of water?

Description : What would you need to do to calculate the molarity of 0.2kg of nail in3kg of water?

Last Answer : Feel Free to Answer

How many 50g cans have a total mass of 2kg?

Description : How many 50g cans have a total mass of 2kg?

Last Answer : Help plz

What is the ratio of 5kg to 2kg?

Description : What is the ratio of 5kg to 2kg?

Last Answer : 44683

What is 6kg nearest to 1/2kg?

Description : What is 6kg nearest to 1/2kg?

Last Answer : 6 kg 650 g is nearest to 6,500 g.

AT Co makes a single product and is preparing its material usage budget for next year. Each unit of product requires 2kg of material, and 5,000 units of product are to be produced next year. Opening inventory of material is budgeted to be 800 kg and AT co budgets to increase material inventory at the end of next year by 20% The material usage budget for next year is (a) 8,000 Kg((b) 9,840 kg ((c) 10,000 Kg (d) 10,160 Kg no

Description : AT Co makes a single product and is preparing its material usage budget for next year. Each unit of  product requires 2kg of material, and 5,000 units of product are to be produced next year. Opening inventory of material is budgeted ... (a) 8,000 Kg((b) 9,840 kg ((c) 10,000 Kg (d) 10,160 Kg

Last Answer : ((c) 10,000 Kg

In 1 kg mixture of iron and carbon, 40% is carbon. How much iron should be added so that the proportion of carbon becomes 20% a)1.5kg b)2kg c)3kg d)5kg

Description :  In 1 kg mixture of iron and carbon, 40% is carbon. How much iron should be added so that the proportion of carbon becomes 20% a)1.5kg b)2kg c)3kg d)5kg e)1kg

Last Answer : E Quantity of the mixture : Quantity of iron = 20 : 20 = 1 : 1 Given that quantity of the mixture = 1 kg Hence quantity of iron to be added = 1 kg

What is the app weight of 60 kg portion ? (i) 11 kg (ii) 12 kg (iii) 13 kg* (iv) None of the above

Description : What is the app weight of 60 kg portion ? (i) 11 kg (ii) 12 kg (iii) 13 kg* (iv) None of the above

Last Answer : (iii) 13 kg*

What is the app. Weight of 52 kg portion? (i) 10 kg (ii) 11 kg* (iii) 12 kg (iv) None of the above

Description : What is the app. Weight of 52 kg portion? (i) 10 kg (ii) 11 kg* (iii) 12 kg (iv) None of the above

Last Answer : (ii) 11 kg*

Defect of short of metal is mainly due to? (i) Less gap (ii) Excessive gap* (iii) Less weight of position (iv) None of above

Description : Defect of short of metal is mainly due to? (i) Less gap (ii) Excessive gap* (iii) Less weight of position (iv) None of above

Last Answer : (ii) Excessive gap*

If first class Brick is immersed in water for 24 hours it should not absorb water by weight more than a) 10% b) 15% c) 20% * d) 25%

Description : If first class Brick is immersed in water for 24 hours it should not absorb water by weight more than a) 10% b) 15% c) 20% * d) 25%

Last Answer : c) 20% *

The dry density of soil is a) Always greater than the saturated density b) Weight of soil solids per unit of total volume prior to drying* c) Total weight of soil solids per unit of its total volume d) Total weight of soil mass per unit of its total volume

Description : The dry density of soil is a) Always greater than the saturated density b) Weight of soil solids per unit of total volume prior to drying* c) Total weight of soil solids per unit of its total volume d) Total weight of soil mass per unit of its total volume

Last Answer : b) Weight of soil solids per unit of total volume prior to drying*

The weight of rivet testing hammer is

Description : The weight of rivet testing hammer is

Last Answer : 110 gm

Conventional method of camber recording a) Piano wire with counter weight* b) By using leveling instrument c) Offset method d) None of the above

Description : Conventional method of camber recording a) Piano wire with counter weight* b) By using leveling instrument c) Offset method d) None of the above

Last Answer : a) Piano wire with counter weight*

.What do you mean by 60 kg rail a. Weight of rail in 1 meter* b. Area of rail of 1 meter c. Weight of rail in 1 feet d. Volume of rail in 1 meter

Description : .What do you mean by 60 kg rail a. Weight of rail in 1 meter* b. Area of rail of 1 meter c. Weight of rail in 1 feet d. Volume of rail in 1 meter

Last Answer : a. Weight of rail in 1 meter*

32 kmph 11.What is the weight per meter length of 52 kg Rail? a. 54.14 kg b. 50.25 kg c. 51.89 kg* d. 53.85 kg

Description : 32 kmph 11.What is the weight per meter length of 52 kg Rail? a. 54.14 kg b. 50.25 kg c. 51.89 kg* d. 53.85 kg

Last Answer : c. 51.89 kg*

The train runs faster on BG than on MG rail because its speed is directly proportional to a) Weight of the train* b) Gauge width c)Policy of Railway Board d) Length of the train

Description : The train runs faster on BG than on MG rail because its speed is directly proportional to a) Weight of the train* b) Gauge width c)Policy of Railway Board d) Length of the train

Last Answer : a) Weight of the train*

How to stop my toddler from head-banging in her crib?

Description : How to stop my toddler from head-banging in her crib?

Last Answer : I would pad the crib parts she’s banging on. I more worried about her hurting herself. I’ve never seen this before. Edit, Is she related to Angus Young?

How did you transition from bed to crib with your toddler?

Description : How did you transition from bed to crib with your toddler?

Last Answer : answer:Once my kids could climb, it became dangerous for them to be in a crib. (They can fall climbing over). So it is time now to start putting her to sleep in a bed. Does she have a lovie or ... bed so they could sleep on the floor, but once they are in your bed they will do it every night.

Can you recommend a reliable, safe crib mattress? (firsthand knowledge only please)

Description : Can you recommend a reliable, safe crib mattress? (firsthand knowledge only please)

Last Answer : Baby mattresses don't sag. Most are firm in the first place and a baby is never in it long enough to do any damage. Unless you are going to have an extremely heavy 30 lb kid, it won't ... can sleep anywhere. Just make sure its firm and not made of hazzardous matterials. Congrats on your little one.

Crib advice?

Description : Crib advice?

Last Answer : answer:I seem to remember cribs having a way to lower the side rail, it would slide down about a foot. Also, you could use a bassinet for the first few moths. Or, get a very stable low step to use, for you to stand on.

What is safe to put in a newborn's crib?

Description : What is safe to put in a newborn's crib?

Last Answer : answer:They stay warm and cozy by being properly dressed (either a onesie, sleeper, or both depending on the temperature) and swaddled (while little enough to stay swaddled). At least, that's what the newest ... warm because he won't stay swaddled and he sweats if I have him in a sleeper at night.