Two contour lines, having the same elevation (a) Cannot cross each other (b) Can cross each other (c) Cannot unite together (d) Can unite together*

Two contour lines, having the same elevation
(a) Cannot cross each other
(b) Can cross each other
(c) Cannot unite together
(d) Can unite together*
by

1 Answer

Answer :

(d) Can unite together*
by

Related questions

Two contour lines, having the same elevation (A) Cannot cross each other (B) Can cross each other (C) Cannot unite together (D) Can unite togethe

Description : Two contour lines, having the same elevation (A) Cannot cross each other (B) Can cross each other (C) Cannot unite together (D) Can unite togethe

Last Answer : (D) Can unite togethe

Pick up the correct statement from the following (A) The contour lines having the same elevation cannot unite and continue as one line (B) A contour can not end abruptly, but must ultimately close itself not necessarily within the limits of map (C) The direction of steepest slope at a point on a contour is at right angles to the contour (D) All the above

Description : Pick up the correct statement from the following (A) The contour lines having the same elevation cannot unite and continue as one line (B) A contour can not end abruptly, but must ultimately close itself not ... slope at a point on a contour is at right angles to the contour (D) All the above

Last Answer : (D) All the above

Contour lines of different elevations can unite to form one line, only in the case of (A) A vertical cliff (B) A saddle (C) A water shed line (D) A hill top

Description : Contour lines of different elevations can unite to form one line, only in the case of  (A) A vertical cliff  (B) A saddle  (C) A water shed line  (D) A hill top 

Last Answer : (A) A vertical cliff 

Contour interval on a map sheet denotes (a) Vertical distance of contour lines above the datum plane (b) Vertical distance between two successive contour lines (c) Slope distance between two successive contour lines (d) Horizontal distance between two successive contour lines

Description : Contour interval on a map sheet denotes (a) Vertical distance of contour lines above the datum plane (b) Vertical distance between two successive contour lines (c) Slope distance between two successive contour lines (d) Horizontal distance between two successive contour lines

Last Answer : (b) Vertical distance between two successive contour lines

A series of closely spaced contour lines represent a (a) Steep slope* (b) Gentle slope (c) Uniform slope (d) Plane surface

Description : A series of closely spaced contour lines represent a (a) Steep slope* (b) Gentle slope (c) Uniform slope (d) Plane surface

Last Answer : (a) Steep slope*

On a topographic map, lines that connect points of the same elevation are termed: w) benchmarks x) bathymetric lines y) contour lines z) isobars

Description : On a topographic map, lines that connect points of the same elevation are termed: w) benchmarks x) bathymetric lines y) contour lines z) isobars

Last Answer : ANSWER: Y -- CONTOUR LINES

The height of formation depends upon the a) Ground contours and the gradient adopted* b) Ground contour only c) Gradient adopted only d) Rainfall intensity over the year

Description : The height of formation depends upon the a) Ground contours and the gradient adopted* b) Ground contour only c) Gradient adopted only d) Rainfall intensity over the year

Last Answer : a) Ground contours and the gradient adopted*

Why is it impossible that two contour lines will cross on the maps you have drawn?

Description : Why is it impossible that two contour lines will cross on the maps you have drawn?

Last Answer : As two contour line are of different heights, it would be impossible for two contour lines to cross. But, the problem is when it comes to printing map details.If two contour lines cross (touch) it means ... of the map. The symbol for cliffs should be shown on the map's legend printed on most maps.

A bridge having super structure with “Single or duplicate girders with cross sleepers on top flanges” is classified as a) RSJ girder bridge b) Cross Girder c) Deck plate girder* d) Open web girder

Description : A bridge having super structure with “Single or duplicate girders with cross sleepers on top flanges” is classified as a) RSJ girder bridge b) Cross Girder c) Deck plate girder* d) Open web girder

Last Answer : c) Deck plate girder*

Contour line is the imaginary line joining places of equal : (1) Rainfall (2) Humidity (3) Elevation (4) Temperature

Description : Contour line is the imaginary line joining places of equal : (1) Rainfall (2) Humidity (3) Elevation (4) Temperature

Last Answer : (3) Elevation Explanation: Contour line is a line on a map or chart joining points of equal height (elevation) or depth. Closely spaced contour lines indicate a steeper grade than the more loosely spaced lines.

Accuracy of elevation of various points obtained from contour map is limited to (A) ½ of the contour interval (B) ¼ th of the contour interval (C) rd of the contour interval (D) th of the contour interval

Description : Accuracy of elevation of various points obtained from contour map is limited to (A) ½ of the contour interval (B) ¼ th of the contour interval (C) rd of the contour interval (D) th of the contour interval

Last Answer : (A) ½ of the contour interval

An imaginary line joining the points of equal elevation on the surface of the earth, represents (A) Contour surface (B) Contour gradient (C) Contour line (D) Level line

Description : An imaginary line joining the points of equal elevation on the surface of the earth, represents (A) Contour surface (B) Contour gradient (C) Contour line (D) Level line

Last Answer : (C) Contour line

A point of known or assumed elevation on a topographic map is termed: w) benchmark x) contour line y) bathymetric point z) none of these

Description : A point of known or assumed elevation on a topographic map is termed: w) benchmark x) contour line y) bathymetric point z) none of these

Last Answer : ANSWER: W -- BENCHMARK

Contour line is the imaginary line joining places of equal : (1) Rainfall (2) Humidity (3) Elevation (4) Temperature

Description : Contour line is the imaginary line joining places of equal : (1) Rainfall (2) Humidity (3) Elevation (4) Temperature

Last Answer : Elevation

Select the correct statement. (A) A contour is not necessarily a closed curve. B) A contour represents a ridge line if the concave side of lower value contour lies towards the higher value contour (C) Two contours of different elevations do not cross each other except in case of an overhanging cliff (D) All of the above statements are correct

Description : Select the correct statement. (A) A contour is not necessarily a closed curve. B) A contour represents a ridge line if the concave side of lower value contour lies towards the higher value contour ... each other except in case of an overhanging cliff (D) All of the above statements are correct

Last Answer : (C) Two contours of different elevations do not cross each other except in case of an overhanging clif

“B” class station is provided only on (a) Single lines (b) Double line (c) On both single as well as double line* (d) None of them

Description : “B” class station is provided only on (a) Single lines (b) Double line (c) On both single as well as double line* (d) None of them

Last Answer : c) On both single as well as double line*

For new lines, width of formation in bank for N.G single line is (a) 3.35 m (b) 3.70 m* (c ) 5.25 m (e) 5.85 m

Description : For new lines, width of formation in bank for N.G single line is (a) 3.35 m (b) 3.70 m* (c ) 5.25 m (e) 5.85 m

Last Answer : b) 3.70 m*

For new lines, width of formation in cutting for N.G. single line is (a) 3.35 m* (b) 3.70 m (c) 5.25 m (d) 5.85 m

Description : For new lines, width of formation in cutting for N.G. single line is (a) 3.35 m* (b) 3.70 m (c) 5.25 m (d) 5.85 m

Last Answer : a) 3.35 m*

For new lines, width of formation in bank for M.G. single line is (a) 5.25 m (b) 5.85 m* (c ) 6.25 m (e) 6.85 m

Description : For new lines, width of formation in bank for M.G. single line is (a) 5.25 m (b) 5.85 m* (c ) 6.25 m (e) 6.85 m

Last Answer : (b) 5.85 m*

For new lines, width of formation in cutting for M.G. single line is (a) 5.25 m* (b) 5.85 m (c) 6.25 m (d) 6.85 m

Description : For new lines, width of formation in cutting for M.G. single line is (a) 5.25 m* (b) 5.85 m (c) 6.25 m (d) 6.85 m

Last Answer : (a) 5.25 m*

The increased gain of 10 dbs for single line & ‘D’ marks rails on double/multiple lines shall be employed for classification of defects. (i) defect in weld (ii) defects in rail. * (iii) for both defects on weld & rail. (iv) None of above.

Description : The increased gain of 10 dbs for single line & ‘D’ marks rails on double/multiple lines shall be employed for classification of defects. (i) defect in weld (ii) defects in rail. * (iii) for both defects on weld & rail. (iv) None of above.

Last Answer : ii) defects in rail. *

Addition gain of 10 db is used for testing. (i) ‘D’ marked rails on single lines. (ii) ‘D’ marked rails on double lines. (iii) Testing on single line and ‘D’ marked rails on double/multiple lines section.* (iv) None of above.

Description : Addition gain of 10 db is used for testing. (i) ‘D’ marked rails on single lines. (ii) ‘D’ marked rails on double lines. (iii) Testing on single line and ‘D’ marked rails on double/multiple lines section.* (iv) None of above.

Last Answer : (iii) Testing on single line and ‘D’ marked rails on double/multiple lines section.*

How rejected portion are to be disposed-off? (i) By Igniting 5 Portions at a time in pit away from store?* (ii) By throwing them away (iii) By dispose off in a pit (iv) By using it in Branch/Yard lines for welding

Description : How rejected portion are to be disposed-off? (i) By Igniting 5 Portions at a time in pit away from store?* (ii) By throwing them away (iii) By dispose off in a pit (iv) By using it in Branch/Yard lines for welding

Last Answer : (i) By Igniting 5 Portions at a time in pit away from store?*

What is the standard distance between lines in Broad Gauge a. 1670 mm b. 1676 mm* c. 1665 mm d. 1680 mm

Description : What is the standard distance between lines in Broad Gauge a. 1670 mm b. 1676 mm* c. 1665 mm d. 1680 mm

Last Answer : b. 1676 mm*

Traveler's site to unite and travel together?

Description : Traveler's site to unite and travel together?

Last Answer : That’s a great question. Hope we get some answers. I’m sure you meant couchsurfing, not coachsurfing.

Which of the countries is an example of 'coming together' federation? (a) Unite States of America (b) India (c) Spain

Description : Which of the countries is an example of 'coming together' federation? (a) Unite States of America (b) India (c) Spain

Last Answer : Which of the countries is an example of 'coming together' federation? (a) Unite States of America (b) India (c) Spain (d) Belgium

Marking of DFWO weld is. (i) Two red point circle on both faces of weld.* (ii) Two red point cross on both faces of weld. (iii) One red point circle on both faces of weld. (iv) None of the above.

Description : Marking of DFWO weld is. (i) Two red point circle on both faces of weld.* (ii) Two red point cross on both faces of weld. (iii) One red point circle on both faces of weld. (iv) None of the above.

Last Answer : i) Two red point circle on both faces of weld.*

The following instrument is used to set out a right angle (a) Cross staff (b) Optical staff (c) Prism square (d) None of the above (e) All the above*

Description : The following instrument is used to set out a right angle (a) Cross staff (b) Optical staff (c) Prism square (d) None of the above (e) All the above*

Last Answer : e) All the above*

Cross sectional area of catch water drain should not be more than a) 0 .75 square meter* b) 0. 90 square meter c) 0. 80 square meter d). 50 square meter

Description : Cross sectional area of catch water drain should not be more than a) 0 .75 square meter* b) 0. 90 square meter c) 0. 80 square meter d). 50 square meter

Last Answer : a) 0 .75 square meter*

Cross slope of the formation to have good drainage of Ballast section is a) 1 in 40* b) 1 in 50 c) 1 in 30 d) 1 in 20

Description : Cross slope of the formation to have good drainage of Ballast section is a) 1 in 40* b) 1 in 50 c) 1 in 30 d) 1 in 20

Last Answer : a) 1 in 40*

Elcometer is used to measure the ……….. a) cross level b) Gauge c) Thickness of paint* d) All the above

Description : Elcometer is used to measure the ……….. a) cross level b) Gauge c) Thickness of paint* d) All the above

Last Answer : c) Thickness of paint*

Length of guard rails to be bent so as to be brought together at the middle of the track.(L2) a) 3200 mm b) 4875 mm* c) 3655 mm d) None of the above

Description : Length of guard rails to be bent so as to be brought together at the middle of the track.(L2) a) 3200 mm b) 4875 mm* c) 3655 mm d) None of the above

Last Answer : b) 4875 mm*

Granite is not suitable for ordinary building purpose because a) It cannot be polished b) It is not fireproof c) It is costly*

Description : Granite is not suitable for ordinary building purpose because a) It cannot be polished b) It is not fireproof c) It is costly*

Last Answer : c) It is costly*

In case of a curved track on electrified, double line, BG section a) Duty hut cannot be provided for a level crossing. b) Duty hut should be on the inside of the curve. c) Duty hut should be on the outside of the curve.* d) Duty hut can be provided on any side of the curve.

Description : In case of a curved track on electrified, double line, BG section a) Duty hut cannot be provided for a level crossing. b) Duty hut should be on the inside of the curve. c) Duty hut should be on the outside of the curve.* d) Duty hut can be provided on any side of the curve.

Last Answer : c) Duty hut should be on the outside of the curve.*

In LWR track on BG a) Level crossing should be separated by providing SEJs b) Level crossing cannot be provided in LWR. c) Level crossing should not fall within the breathing length of LWR* d) Level crossing should be laid with rail free fastenings.

Description : In LWR track on BG a) Level crossing should be separated by providing SEJs b) Level crossing cannot be provided in LWR. c) Level crossing should not fall within the breathing length of LWR* d) Level crossing should be laid with rail free fastenings.

Last Answer : c) Level crossing should not fall within the breathing length of LWR*

bridge foundation having less then 2M depth below bed level in case of arch bridges and 1.2M depth below bed level in case of other bridges is termed as

Description : bridge foundation having less then 2M depth below bed level in case of arch bridges and 1.2M depth below bed level in case of other bridges is termed as

Last Answer : …Shallow foundation..

Chandigarh is a city which has roads generally parallel or perpendicular to each other. The ideal water supply system in such a city should be a. Dead and system b. Grid Iron system* c. Ring system d. Any of them

Description : Chandigarh is a city which has roads generally parallel or perpendicular to each other. The ideal water supply system in such a city should be a. Dead and system b. Grid Iron system* c. Ring system d. Any of them

Last Answer : b. Grid Iron system*

How do you interpret contour lines?

Description : How do you interpret contour lines?

Last Answer : Need answer

What do contour lines mean?

Description : What do contour lines mean?

Last Answer : A line on a map joining points of equal height above or belowsea level.

What does lines on a contour map indicate?

Description : What does lines on a contour map indicate?

Last Answer : They indicate positions of the same high above sea level

In contour drawings crossing lines is called what?

Description : In contour drawings crossing lines is called what?

Last Answer : depth

How do contour lines show a steep slope?

Description : How do contour lines show a steep slope?

Last Answer : The closer together the lines are - the steeper the slope.

How do contour lines show a steep slope?

Description : How do contour lines show a steep slope?

Last Answer : The closer together the lines are - the steeper the slope.

In contour drawings crossing lines is called what?

Description : In contour drawings crossing lines is called what?

Last Answer : depth

How do contour lines help you visualize a feature of Earth's solid surface?

Description : How do contour lines help you visualize a feature of Earth's solid surface?

Last Answer : A contour line represents a certain vertical height above thethe contour line shown drawn below. Contour lines are a means ofrepresenting 3D hills and mountains on a 2D flat paper. Maps shouldshow the height between contour lines: 50 metres between contourlines is common.

What is the alternate name for contour lines? (1) Isopotential (2) Istherm (3) Isohypse (4) Isohyet

Description : What is the alternate name for contour lines? (1) Isopotential (2) Istherm (3) Isohypse (4) Isohyet

Last Answer : (3) Isohypse Explanation: Isohypse is a line on a map that joins points of equal elevation. It is also known as contour line.

A series of closely spaced contour lines represents a (A) Steep slope (B) Gentle slope (C) Uniform slope (D) Plane surface

Description : A series of closely spaced contour lines represents a (A) Steep slope (B) Gentle slope (C) Uniform slope (D) Plane surface

Last Answer : (A) Steep slope

Pick up the correct statement from the following: (A) For nautical purposes, low water level is generally referred to by the navigators (B) The depth of the bed of the sea from the surface of water is called sounding (C) The contour lines on the bed of a water body are called fathoms (D) All the abov

Description : Pick up the correct statement from the following: (A) For nautical purposes, low water level is generally referred to by the navigators (B) The depth of the bed of the sea from the surface of water is ... (C) The contour lines on the bed of a water body are called fathoms (D) All the above

Last Answer : (D) All the above

Function of matrix band: A. Substitute for the missing wall so adequate condensation forces can be applied B. Permit re-establishment of proper contact lines C. Restrict extrusion of amalgam and prevent formation of an “overhang” D. Provide adequate physiological contour for the proximal surface E. Provide an acceptable surface texture to the proximal surface F. All of the above

Description : Function of matrix band: A. Substitute for the missing wall so adequate condensation forces can be applied B. Permit re-establishment of proper contact lines C. Restrict extrusion of amalgam and prevent ... E. Provide an acceptable surface texture to the proximal surface F. All of the above

Last Answer : F. All of the above

What is the alternate name for contour lines ? (1) Isopotential (2) Istherm (3) Isohypse (4) Isohyet

Description : What is the alternate name for contour lines ? (1) Isopotential (2) Istherm (3) Isohypse (4) Isohyet

Last Answer : Isohypse