Chandigarh is a city which has roads generally parallel or perpendicular to each other. The ideal water supply system in such a city should be a. Dead and system b. Grid Iron system* c. Ring system d. Any of them

Chandigarh is a city which has roads generally parallel or perpendicular to each other. The  ideal water supply system in such a city should be
a. Dead and system
b. Grid Iron system*
c. Ring system  
d. Any of them
by

1 Answer

Answer :

b. Grid Iron system*
by

Related questions

The four major water supply distribution systems, are (A) Dead end, tree, grid iron and reticulation (B) Dead end, tree, grid iron and circular (C) Tree, grid iron, ring and radial (D) Tree, reticulation, circular and ring

Description : The four major water supply distribution systems, are (A) Dead end, tree, grid iron and reticulation (B) Dead end, tree, grid iron and circular (C) Tree, grid iron, ring and radial (D) Tree, reticulation, circular and ring

Last Answer : (C) Tree, grid iron, ring and radial

For a city developed haphazardly, the layout of distribution pipes preferred to, is (A) Ring system (B) Radial system (C) Grid iron system (D) Dead end system

Description : For a city developed haphazardly, the layout of distribution pipes preferred to, is (A) Ring system (B) Radial system (C) Grid iron system (D) Dead end system

Last Answer : (D) Dead end system

In which of the following directions, the strength of timber is maximum a) Parallel to grains* b) 45 degree to grains c) Perpendicular to grains d) same in all directions

Description : In which of the following directions, the strength of timber is maximum a) Parallel to grains* b) 45 degree to grains c) Perpendicular to grains d) same in all directions

Last Answer : a) Parallel to grains*

In a well planned city, the layout of distribution pipes generally adopted, is (A) Grid-iron system (B) Interlaced system (C) Reticulation system (D) All the above

Description : In a well planned city, the layout of distribution pipes generally adopted, is  (A) Grid-iron system  (B) Interlaced system  (C) Reticulation system  (D) All the above 

Last Answer : (D) All the above 

Network of a series of vertical and horizontal lines constructed perpendicular to each other is known as: (1) Grid system (2) Latitudes (3) Geographic coordinates (4) Longitude

Description : Network of a series of vertical and horizontal lines constructed perpendicular to each other is known as: (1) Grid system (2) Latitudes (3) Geographic coordinates (4) Longitude

Last Answer : Grid system

Cotter joints is connected two ......... roads. A. Co - axial B. Parallel C. Perpendicular D. Inclined

Description : Cotter joints is connected two ......... roads. A. Co - axial B. Parallel C. Perpendicular D. Inclined

Last Answer : A. Co - axial

Cotter joints is connected two ......... roads. A. Co - axial B. Parallel C. Perpendicular D. Inclined

Description : Cotter joints is connected two ......... roads. A. Co - axial B. Parallel C. Perpendicular D. Inclined

Last Answer : A. Co - axial

Angle of crossing of a bridge is the angle between a) C.L. of water course/road to C.L. of track* b) C.L. of water course to C.L. of pier c) C.L. of water course to normal (perpendicular) of C.L. of track d) C.L. of abutment to C.L. of pier

Description : Angle of crossing of a bridge is the angle between a) C.L. of water course/road to C.L. of track* b) C.L. of water course to C.L. of pier c) C.L. of water course to normal (perpendicular) of C.L. of track d) C.L. of abutment to C.L. of pier

Last Answer : a) C.L. of water course/road to C.L. of track*

Skew of a bridge is the angle between a) C.L. of water course to C.L. of track b) C.L. of water course to C.L. of pier c) C.L. of water course/road to normal (perpendicular) of C.L. of track* d) C.L. of abutment to C.L. of pier

Description : Skew of a bridge is the angle between a) C.L. of water course to C.L. of track b) C.L. of water course to C.L. of pier c) C.L. of water course/road to normal (perpendicular) of C.L. of track* d) C.L. of abutment to C.L. of pier

Last Answer : c) C.L. of water course/road to normal (perpendicular) of C.L. of track*

Which of the following in theodolite work is imperfect adjustment of the instrument (a) Error due to line of collimation being perpendicular to the horizontal axis (b) Error due to axis not to perpendicular of the vertical axis (c) Error due to imperfect graduation (d) Error due to eccentricity of vernires (e) All of the above*

Description : Which of the following in theodolite work is imperfect adjustment of the instrument (a) Error due to line of collimation being perpendicular to the horizontal axis (b) Error due to axis not to perpendicular ... to imperfect graduation (d) Error due to eccentricity of vernires (e) All of the above*

Last Answer : (e) All of the above*

Clear perpendicular distance between inner faces of two rails is a. Gauge of track* b. Inner gauge c. Wheel base d. Wheel gauge

Description : Clear perpendicular distance between inner faces of two rails is a. Gauge of track* b. Inner gauge c. Wheel base d. Wheel gauge

Last Answer : a. Gauge of track*

The figure shows the front view of a convex lens, which originally had only one edge. Five holes of different shapes, namely triangle, square, pentagon, hexagon and circle, were drilled through it at points P, Q, R, S and T in such a way that the holes were parallel to each other, perpendicular to the edge and all the holes were still within the lens edge. What is the total number of edges in the lens after the holes were drilled?

Description : The figure shows the front view of a convex lens, which originally had only one edge. Five holes of different shapes, namely triangle, square, pentagon, hexagon and circle, were drilled through it at points P ... . What is the total number of edges in the lens after the holes were drilled? 

Last Answer : 57

Why are most of the roads in America in a grid?

Description : Why are most of the roads in America in a grid?

Last Answer : answer:Medieval European cities were arranged in a circular fashion around a smaller original settlement, which was itself built in a rough circle around a defensible central position such as a castle ... and new settlements built from scratch over top of the corpses and graveyards of its victims.

Pick up the correct statement from the following: Method of sawing timber (A) Tangentially to annual rings, is known as tangential method (B) In four quarters such that each board cuts annual rings at angles not less than 45°, is known as quarter sawing method (C) Cut out of quarter logs, parallel to the medullary rays and perpendicular to annual rings, is known as radial sawing (D) All the above

Description : Pick up the correct statement from the following: Method of sawing timber (A) Tangentially to annual rings, is known as tangential method (B) In four quarters such that each board cuts annual rings ... medullary rays and perpendicular to annual rings, is known as radial sawing (D) All the above

Last Answer : Answer: Option D

At locations where access to the new bridge construction is available by rail, the launching of girders upto 18.3 m which method is ideal. a) slew in slew out method b) gantry method c) Launching of girders with the help of a BFR*: d) Pantoon method

Description : At locations where access to the new bridge construction is available by rail, the launching of girders upto 18.3 m which method is ideal. a) slew in slew out method b) gantry method c) Launching of girders with the help of a BFR*: d) Pantoon method

Last Answer : c) Launching of girders with the help of a

An artificial stone made from pieces of white marble, white cement and other coloring agents, generally used for floor and facing walls is known as a) Topaz b) Marble c) Terrazzo* d) Gneiss

Description : An artificial stone made from pieces of white marble, white cement and other coloring agents, generally used for floor and facing walls is known as a) Topaz b) Marble c) Terrazzo* d) Gneiss

Last Answer : c) Terrazzo*

A rural water supply serves a population of 10, 000 at the rate of 50 litres per capita per day . For the chlorine dose of 2 PPM the required amount of bleaching powder with 20% available chlorine will be a. 0.5 kg b. 5 kg * c. 10 kg d. 15 kg

Description : A rural water supply serves a population of 10, 000 at the rate of 50 litres per capita per day . For the chlorine dose of 2 PPM the required amount of bleaching powder with 20% available chlorine will be a. 0.5 kg b. 5 kg * c. 10 kg d. 15 kg

Last Answer : b. 5 kg

what- A map is drawn on a coordinate grid, as shown. The line represents an incoming flight path. A plane is about to leave on a perpendicular flight path that runs through the point (0, 4).Which line represents the outgoing flight path?

Description : what- A map is drawn on a coordinate grid, as shown. The line represents an incoming flight path. A plane is about to leave on a perpendicular flight path that runs through the point (0, 4).Which line represents the outgoing flight path?

Last Answer : y= -5x +4

Camber in steel triangulated girder is provided to compensate for deflection a) Under live load and dead load* b) Under live load c) Under dead load d) None of the above

Description : Camber in steel triangulated girder is provided to compensate for deflection a) Under live load and dead load* b) Under live load c) Under dead load d) None of the above

Last Answer : a) Under live load and dead load*

Minimum speed restriction to be imposed for Track renewal is:- (a) Stop dead & 10 Kmph (b) 10 Kmph (c) 15 Kmph (d) 20 Kmph*

Description : Minimum speed restriction to be imposed for Track renewal is:- (a) Stop dead & 10 Kmph (b) 10 Kmph (c) 15 Kmph (d) 20 Kmph*

Last Answer : (d) 20 Kmph*

Quicksand is a) Moist sand containing a small percentage of clay b) Is a condition which generally occurs in coarse sands c) Is a condition in which cohesive properties of soil increase rapidly d) Is a condition in which a cohesion less soil loses its strength because of upward flow of water

Description : Quicksand is a) Moist sand containing a small percentage of clay b) Is a condition which generally occurs in coarse sands c) Is a condition in which cohesive properties of soil increase rapidly d) Is a condition in which a cohesion less soil loses its strength because of upward flow of water

Last Answer : d) Is a condition in which a cohesion less soil loses its strength because of upward flow of water

Before discharging the foul sewage into rivers, it is generally treated by (a) screening (b) sedimentation (c) Oxidation (d) sludge digestion and disinfection (e) all the above*

Description : Before discharging the foul sewage into rivers, it is generally treated by (a) screening (b) sedimentation (c) Oxidation (d) sludge digestion and disinfection (e) all the above*

Last Answer : e) all the above*

The capacity of high level flushing cistern is generally (a) 7.5 ltrs. (b) 10 ltrs.* (c) 12.5 ltrs. (d) None of these

Description : The capacity of high level flushing cistern is generally (a) 7.5 ltrs. (b) 10 ltrs.* (c) 12.5 ltrs. (d) None of these

Last Answer : b) 10 ltrs.*

In case of septic tank, the length (L) to width (B) ratio is generally (a ) L = 3 B* (b) L = 5 B (c) L = 1.5 B (d) L = B

Description : In case of septic tank, the length (L) to width (B) ratio is generally (a ) L = 3 B* (b) L = 5 B (c) L = 1.5 B (d) L = B

Last Answer : (a ) L = 3 B*

Stone generally preferred for railway ballast is a) Sandstone b) Dolomite c) Marble d) Basalt or trap granite*

Description : Stone generally preferred for railway ballast is a) Sandstone b) Dolomite c) Marble d) Basalt or trap granite*

Last Answer : d) Basalt or trap granite*

For railway bridges with spans in excess of 30.5m, generally provided with a) deck type girders b) open web through girders* c) semi through girders d) shallow type girders

Description : For railway bridges with spans in excess of 30.5m, generally provided with a) deck type girders b) open web through girders* c) semi through girders d) shallow type girders

Last Answer : b) open web through girders*

A bridge is generally specified as “Br. No. 180 (5x9.10m G) at km 345/5-6”. a) Effective Span b) Width of bridge c) Clear Span* d) Overall length of bridge

Description : A bridge is generally specified as “Br. No. 180 (5x9.10m G) at km 345/5-6”. a) Effective Span b) Width of bridge c) Clear Span* d) Overall length of bridge

Last Answer : c) Clear Span*

The spacing of tube wells should generally be more than ----------from the circle of influence a)10 metre b)50 metre c)100 metre* d) 500 metre

Description : The spacing of tube wells should generally be more than ----------from the circle of influence a)10 metre b)50 metre c)100 metre* d) 500 metre

Last Answer : c)100 metre*

The gradient of a platform is generally (a) 1 in 1000 (b) 1 in 750 (c) 1 in 500* (d) 1 in 250

Description : The gradient of a platform is generally (a) 1 in 1000 (b) 1 in 750 (c) 1 in 500* (d) 1 in 250

Last Answer : (c) 1 in 500*

While designing a forging, the profile is selected such that the fibrous lines are parallel to the tensile forces and perpendicular to shear forces. a) True b) False

Description : While designing a forging, the profile is selected such that the fibrous lines are parallel to the tensile forces and perpendicular to shear forces. a) True b) False

Last Answer : a) True

When a uniform magnetic field B is applied to a current carrying coil, the coil will rotate in such a manner that its plane a) becomes parallel to B b) becomes anti-parallel to B c) makes an angle of 600 with B d) becomes perpendicular to B

Description : When a uniform magnetic field B is applied to a current carrying coil, the coil will rotate in such a manner that its plane a) becomes parallel to B b) becomes anti-parallel to B c) makes an angle of 600 with B d) becomes perpendicular to B

Last Answer : d) becomes perpendicular to B

______ is a planned city in India. (a) Varanasi (b) Srinagar (c) Pune (d) Chandigarh

Description : ______ is a planned city in India. (a) Varanasi (b) Srinagar (c) Pune (d) Chandigarh

Last Answer : Ans: (d)

Which is the best planned city in India? (1) Salem (2) Chandigarh (3) Coimbatore (4) New Delhi

Description : Which is the best planned city in India? (1) Salem (2) Chandigarh (3) Coimbatore (4) New Delhi

Last Answer : (2) Chandigarh Explanation: The city of Chandigarh, was the first planned city in India post-independence in 1947 and is known internationally for its architecture and urban design. It is neatly ... . Adding to that, every sector has a park and a shopping street with plantations surrounding them

Which architect designed the city of Chandigarh ?

Description : Which architect designed the city of Chandigarh ?

Last Answer : Le Corbusier.

Piping in a soil mass is a) Erosion of subsoil by the high velocities of flow of water through it when such velocities exceed a certain limit* b) Caused due to very low exit gradient c) Due to continuous passage of water through a series of well connected pores d) Due to loss of the strength of cohesion less soil because of upward flow of of water

Description : Piping in a soil mass is a) Erosion of subsoil by the high velocities of flow of water through it when such velocities exceed a certain limit* b) Caused due to very low exit gradient c) ... connected pores d) Due to loss of the strength of cohesion less soil because of upward flow of of water

Last Answer : a) Erosion of subsoil by the high velocities of flow of water through it when such velocities exceed a certain limit*

Two lines are respectively perpendicular to two parallel lines. Show that they are parallel to each other. -Maths 9th

Description : Two lines are respectively perpendicular to two parallel lines. Show that they are parallel to each other. -Maths 9th

Last Answer : Given Two lines m and n are parallel and another two lines p and q are respectively perpendicular to m and n. i.e., p ⊥ m, p ⊥ n, q ⊥ m, q ⊥ n To prove p||g Proof Since, ... of interior angles on the same side of the transversal is supplementary, then the two lines are parallel. Hence, p||g.

Two lines are respectively perpendicular to two parallel lines. Show that they are parallel to each other. -Maths 9th

Description : Two lines are respectively perpendicular to two parallel lines. Show that they are parallel to each other. -Maths 9th

Last Answer : Given Two lines m and n are parallel and another two lines p and q are respectively perpendicular to m and n. i.e., p ⊥ m, p ⊥ n, q ⊥ m, q ⊥ n To prove p||g Proof Since, ... of interior angles on the same side of the transversal is supplementary, then the two lines are parallel. Hence, p||g.

is this statement true or falseIf two lines are perpendicular to the same line, then they are parallel to each other.?

Description : is this statement true or falseIf two lines are perpendicular to the same line, then they are parallel to each other.?

Last Answer : 1

If the resultant vector forms an angle of 45°, then the two components are A. parallel to each otheB. perpendicular to each other C. anti parallel to each other D. anti perpendicular to each otherr

Description : If the resultant vector forms an angle of 45°, then the two components are A. parallel to each other B. perpendicular to each other C. anti parallel to each other D. anti perpendicular to each other

Last Answer : perpendicular to each other

Two perpendicular components are A. independent of each other B. dependent on each other C. anti parallel to each other D. parallel to each other

Description : Two perpendicular components are A. independent of each other B. dependent on each other C. anti parallel to each other D. parallel to each other

Last Answer : independent of each other

F = BIL can only be used if the magnetic field and electric current are A. at right angles to each other B. in same direction C. anti-parallel to each other D. anti-perpendicular to each other

Description : F = BIL can only be used if the magnetic field and electric current are A. at right angles to each other B. in same direction C. anti-parallel to each other D. anti-perpendicular to each other

Last Answer : at right angles to each other

When making hand-tied bouquets, the stems should be positioned: a. Parallel to each other b. Perpendicular to each other c. Any way that looks nice and holds together d. In a spiraling manner

Description : When making hand-tied bouquets, the stems should be positioned: a. Parallel to each other b. Perpendicular to each other c. Any way that looks nice and holds together d. In a spiraling manner

Last Answer : In a spiraling manner

Pick up the incorrect statement from the following: (A) The bottom and top ends of slump mould are parallel to each other (B) The axis of the mould is perpendicular to the end faces (C) The internal surface of the mould is kept clean and free from set cement (D) The mould is in the form of a frustum of hexagonal pyramid

Description : Pick up the incorrect statement from the following: (A) The bottom and top ends of slump mould are parallel to each other (B) The axis of the mould is perpendicular to the end faces (C) The ... clean and free from set cement (D) The mould is in the form of a frustum of hexagonal pyramid

Last Answer : Answer: Option D

Soundness test of cement is done to determine its a) Durability in seawater b) Free lime content* c) Iron oxide content d) Alumina content

Description : Soundness test of cement is done to determine its a) Durability in seawater b) Free lime content* c) Iron oxide content d) Alumina content

Last Answer : b) Free lime content*

Which of the following ingredients of Brick earth enables the brick to retain its shape a) Alumina b) Silica* c) Iron d) Magnesia

Description : Which of the following ingredients of Brick earth enables the brick to retain its shape a) Alumina b) Silica* c) Iron d) Magnesia

Last Answer : b) Silica*

Which one of the following impurity is not desirable in the soil used for brick formation a) Alkali b) Kankar c) Iron oxide d) Alkali & Kankar*

Description : Which one of the following impurity is not desirable in the soil used for brick formation a) Alkali b) Kankar c) Iron oxide d) Alkali & Kankar*

Last Answer : d) Alkali & Kankar*

Surface preparation for Metallising the abrasives used for final cleaning is a) Chilled iron grit G.24, as defined in BS : 2451 b) Washed salt free angular silica sand of mesh size 12 to 30 with a minimum of 40% retained on a 20 mesh c) either (a) or (b) * d) d) neither (a) or (b)

Description : Surface preparation for Metallising the abrasives used for final cleaning is a) Chilled iron grit G.24, as defined in BS : 2451 b) Washed salt free angular silica sand of mesh size 12 to 30 with a minimum of 40% retained on a 20 mesh c) either (a) or (b) * d) d) neither (a) or (b)

Last Answer : c) either (a) or (b) *

The purpose of reconnaissance survey (a) To determine technical fenibility of the line* (b) To assess whether such a line is required or not (c) To decide the final alignment of the railway line (d) None of the above

Description : The purpose of reconnaissance survey (a) To determine technical fenibility of the line* (b) To assess whether such a line is required or not (c) To decide the final alignment of the railway line (d) None of the above

Last Answer : (a) To determine technical fenibility of the line*

Two contour lines, having the same elevation (a) Cannot cross each other (b) Can cross each other (c) Cannot unite together (d) Can unite together*

Description : Two contour lines, having the same elevation (a) Cannot cross each other (b) Can cross each other (c) Cannot unite together (d) Can unite together*

Last Answer : (d) Can unite together*

The ideal angle of banking provided on roads a.Depends on (velocity)2 of vehicle b.Depends on the nature of road surface c.Depend on coefficient of friction between the road and the vehicle cantact point d.Depends on weight of the vehicle e.All above

Description : The ideal angle of banking provided on roads a.Depends on (velocity)2 of vehicle b.Depends on the nature of road surface c.Depend on coefficient of friction between the road and the vehicle cantact point d.Depends on weight of the vehicle e.All above

Last Answer : a. Depends on (velocity)2 of vehicle