.308- Life expectancy of V-belt in farm machinery is about.... (a) 200-500 hrs (b) 1000-2000 hrs (c) 2000-5000hrs (d) 5000-10000hrs

.308- Life expectancy of V-belt in farm machinery is about....
(a) 200-500 hrs
(b) 1000-2000 hrs
(c) 2000-5000hrs
(d) 5000-10000hrs
by

1 Answer

Answer :

(b) 1000-2000 hrs
by

Related questions

A traction fitted with diesel engine will have good slogging ability as lugging ability if it has a reserve of a.500 rpm d.200 rpm c.300 rpm e.1000 rpm

Description : A traction fitted with diesel engine will have good slogging ability as lugging ability if it has a reserve of a.500 rpm d.200 rpm c.300 rpm e.1000 rpm

Last Answer : a.500 rpm

How many minimum tractor hours per year of 40 H.P. power should be used approximately for purely agricultural use and not for custom service unit to become viable unit ? (A) 500 hrs. (B) 600 hrs. (C) 1000 hrs. (D) 1500 hrs. (E) 2000 hrs.

Description : How many minimum tractor hours per year of 40 H.P. power should be used approximately for purely agricultural use and not for custom service unit to become viable unit ? (A) 500 hrs. (B) 600 hrs. (C) 1000 hrs. (D) 1500 hrs. (E) 2000 hrs.

Last Answer : (C) 1000 hrs.

How many minimum tractor hours per year of 40 H.P. power should be used approximately for purely agricultural use and not for custom service unit to become viable unit ? (A) 500 hrs. (B) 600 hrs. (C) 1000 hrs. (D) 1500 hrs. (E) 2000 hrs.

Description : How many minimum tractor hours per year of 40 H.P. power should be used approximately for purely agricultural use and not for custom service unit to become viable unit ? (A) 500 hrs. (B) 600 hrs. (C) 1000 hrs. (D) 1500 hrs. (E) 2000 hrs.

Last Answer : (E) 2000 hrs.

V -belt are most suitable for a. less space requirements b. use with adjustable pulley foe speed change c. both (a) and (b) d. none of the above

Description : V -belt are most suitable for a. less space requirements b. use with adjustable pulley foe speed change c. both (a) and (b) d. none of the above

Last Answer : c. both (a) and (b)

When V-belt drive is used a safety device, its performance is affected by a) Variation in belt tention b) Increase in coefficient of friction as belt slippage increase c) Both (a) and (b) d) None of the above

Description : When V-belt drive is used a safety device, its performance is affected by a) Variation in belt tention b) Increase in coefficient of friction as belt slippage increase c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

When frequency of occurrence of overload is less and magnitude of overload is also less than safety device used is a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Description : When frequency of occurrence of overload is less and magnitude of overload is also less than safety device used is a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Last Answer : a) Safety jump clutch

When frequency of occurrence of overload is less but the mangnitude of overload is large than safety device used is: a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Description : When frequency of occurrence of overload is less but the mangnitude of overload is large than safety device used is: a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Last Answer : b) Shear device

V-belt drive transmission system is used when it is designed to achieve a) High speed ratio b) Space requirements are limited c) Both (a) and (b) d) None of the above

Description : V-belt drive transmission system is used when it is designed to achieve a) High speed ratio b) Space requirements are limited c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

Diameter of pully should be such that it gives the best speed of ........meter/minute at full throtlle: A)500 b)950 C)1500 d)2000

Description : Diameter of pully should be such that it gives the best speed of ........meter/minute at full throtlle: A)500 b)950 C)1500 d)2000

Last Answer : b)950

Heating value of coal is approximately (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg

Description : Heating value of coal is approximately (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg

Last Answer : Ans: C

A minimum yearly deposit of ________ is required to open and maintain a PPF account, and a maximum deposit of _____. A. Rs. 500 and Rs 1.50 lakhs B. Rs. 1000 and Rs 2.50 lakhs C. Rs. 2000 and Rs 3.50 lakhs D. Rs. 5000 and Rs 4.50 lakhs

Description : A minimum yearly deposit of ________ is required to open and maintain a PPF account, and a maximum deposit of _____. A. Rs. 500 and Rs 1.50 lakhs B. Rs. 1000 and Rs 2.50 lakhs C. Rs. 2000 and Rs 3.50 lakhs D. Rs. 5000 and Rs 4.50 lakhs

Last Answer : A. Rs. 500 and Rs 1.50 lakhs Explanation: A minimum yearly deposit of Rs. 500 is required to open and maintain a PPF account, and a maximum deposit of Rs.1.5 lakhs (as on Financial year 2015- ... Income Tax Act. The amount can be deposited in lump sum or in a maximum of 12 instalments per year.

News paper which post large number of copies can post their paper without affixing post stamps which are published more than_____copies a) 1000 b) 2000 c) 500 d) 5000

Description : News paper which post large number of copies can post their paper without affixing post stamps which are published more than_____copies a) 1000 b) 2000 c) 500 d) 5000

Last Answer : c) 500

Heating value of coal is approximately in power plant (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg.

Description : Heating value of coal is approximately in power plant (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg.

Last Answer : 5000-6500 kcal / kg

Speed of the cutter bar in case of combine (grain) is (a)400-550 rpm (b) 500-800rpm (c)800-1000rpm (d) 1000-1200rpm

Description : Speed of the cutter bar in case of combine (grain) is (a)400-550 rpm (b) 500-800rpm (c)800-1000rpm (d) 1000-1200rpm

Last Answer : a)400-550 rpm

Working life of tractor drawn cultivator is — hrs. a. 1000 b. 2500 c. 3500 d. 5000

Description : Working life of tractor drawn cultivator is — hrs. a. 1000 b. 2500 c. 3500 d. 5000

Last Answer : b. 2500

Optimum operating cylinder speed for the power operated maize sheller is a) 200-400rpm b) 400-600rpm c) 600-800rpm d) 1000-1200rpm

Description : Optimum operating cylinder speed for the power operated maize sheller is a) 200-400rpm b) 400-600rpm c) 600-800rpm d) 1000-1200rpm

Last Answer : c) 600-800rpm

The amount of liquid required for spraying of plantation crops is : a.) 200-400L/ha b.) 400-600L/ha c.) 600-800L/ha d.) 1000-1200L/ha

Description : The amount of liquid required for spraying of plantation crops is : a.) 200-400L/ha b.) 400-600L/ha c.) 600-800L/ha d.) 1000-1200L/ha

Last Answer : d.) 1000-1200L/ha

he amount of liquid required for ground spraying of agricultural crops is : a.) 400-600L/ha b.) 200-400L/ha c.) 1000-2000L/ha d.) 600-800L/ha

Description : he amount of liquid required for ground spraying of agricultural crops is : a.) 400-600L/ha b.) 200-400L/ha c.) 1000-2000L/ha d.) 600-800L/ha

Last Answer : a.) 400-600L/ha

The formula for tension difference or effective pull, required to transmit the load at.... (a) (Tt-Ts)=1000(kw/V) (b) Tt/Ts=c^ke (c) (Tt-Ts)= 1000(Hp/V) (d) None of the above

Description : The formula for tension difference or effective pull, required to transmit the load at.... (a) (Tt-Ts)=1000(kw/V) (b) Tt/Ts=c^ke (c) (Tt-Ts)= 1000(Hp/V) (d) None of the above

Last Answer : (a) (Tt-Ts)=1000(kw/V)

Slip of belt is responsible for A. Reduction is speed B. Reduction in power C. Reduction in belt life D. All of the above

Description : Slip of belt is responsible for A. Reduction is speed B. Reduction in power C. Reduction in belt life D. All of the above

Last Answer : D. All of the above

Smaller tension ratio result in.... (a) Unnecessary high tension in belt (b) Reduction in belt life (c) Both (c) & (b) (d) Excessive belt slippage

Description : Smaller tension ratio result in.... (a) Unnecessary high tension in belt (b) Reduction in belt life (c) Both (c) & (b) (d) Excessive belt slippage

Last Answer : (c) Both (c) & (b)

310- Larger tension ratio result in... (a) Unnecessary high tension in belt (b) Reduction in belt life (c) Excessive belt slippage (d) Increase belt life

Description : 310- Larger tension ratio result in... (a) Unnecessary high tension in belt (b) Reduction in belt life (c) Excessive belt slippage (d) Increase belt life

Last Answer : (c) Excessive belt slippage

there has been a rising trend in production and sale of farm machinery. a) From 1986 to 2000 b) From 1920 to 2005 c) From 1935 to 2000 d) None of the above

Description : there has been a rising trend in production and sale of farm machinery. a) From 1986 to 2000 b) From 1920 to 2005 c) From 1935 to 2000 d) None of the above

Last Answer : From 1986 to 2000

Lewis formula is used in the design of a) gears b) clutch c) chain drive d) belt drives

Description : Lewis formula is used in the design of a) gears b) clutch c) chain drive d) belt drives

Last Answer : a) gears

Length of open belt is given by formula a. L=[2C+( 2) (DI+D2)] + [ /4C] b. L=[2C+( 2) (DI+D2)] + [ /4C] c. L=[2C+( 2) (DI+D2)] + [ ] d. L=[2C+( 2) (DI D2)] + [ ]

Description : Length of open belt is given by formula a. L=[2C+( 2) (DI+D2)] + [ /4C] b. L=[2C+( 2) (DI+D2)] + [ /4C] c. L=[2C+( 2) (DI+D2)] + [ ] d. L=[2C+( 2) (DI D2)] + [ ]

Last Answer : a. L=[2C+( 2) (DI+D2)] + [ /4C]

Function of idler pully are a. to increase the angle of contact of belt on pully b. maintain belt tension as belt stretches c. canter to centre distance remain same d. all the above

Description : Function of idler pully are a. to increase the angle of contact of belt on pully b. maintain belt tension as belt stretches c. canter to centre distance remain same d. all the above

Last Answer : d. all the above

Belt Tension can be adjusted by a. idler pulley b. slide rails c. tilting plate drive d. all the above

Description : Belt Tension can be adjusted by a. idler pulley b. slide rails c. tilting plate drive d. all the above

Last Answer : d. all the above

What is the value for centrifugal torque for maximum power transmission in belt drives a) ½ maximum torque b) 2/3 maximum torque c) ¾ maximum torque d) None of the above

Description : What is the value for centrifugal torque for maximum power transmission in belt drives a) ½ maximum torque b) 2/3 maximum torque c) ¾ maximum torque d) None of the above

Last Answer : d) None of the above

Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above

Description : Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above

Last Answer : A)ldler pulley

the time taken to plough one acre farm with 35 hp tractor is : A)60 minutes b)75 minutes C)90 minutes d)120 minutes

Description : the time taken to plough one acre farm with 35 hp tractor is : A)60 minutes b)75 minutes C)90 minutes d)120 minutes

Last Answer : b)75 minutes

A power tiller is relatively more suitable for : A. Puddling of low land paddy fields with a rotary tiller B. Primary tillage of upland paddy fields with a rotary tillers C. Primary tillage with a mould board plough D. Farm transportation work

Description : A power tiller is relatively more suitable for : A. Puddling of low land paddy fields with a rotary tiller B. Primary tillage of upland paddy fields with a rotary tillers C. Primary tillage with a mould board plough D. Farm transportation work

Last Answer : A. Puddling of low land paddy fields with a rotary tiller

How many mL of a 1:500 w/v stock solution should be used to make 5 liters of 1:2000 w/v solution? (A) 750 mL (B) 1000 mL (c) 1250 mL (D) 1500 mL

Description : How many mL of a 1:500 w/v stock solution should be used to make 5 liters of 1:2000 w/v solution? (A) 750 mL (B) 1000 mL (c) 1250 mL (D) 1500 mL

Last Answer : (c) 1250 mL

What does the 30 represent in this example in the government 5783400 308 158U A00508 04 409 667100 ESPZA 5000?

Description : What does the 30 represent in this example in the government 5783400 308 158U A00508 04 409 667100 ESPZA 5000?

Last Answer : Need answer

The cutter bar of a tractor operated mower ordinarily makes: A. 800-1200 strokes/min B. 1600-2000 strokes/min C. 2400-2800 strokes/min D. 3200-3600 strokes/min

Description : The cutter bar of a tractor operated mower ordinarily makes: A. 800-1200 strokes/min B. 1600-2000 strokes/min C. 2400-2800 strokes/min D. 3200-3600 strokes/min

Last Answer : A. 800-1200 strokes/min

Minimum excretory urinary volume for waste products elimination during 24 hrs is (A) 200–300 ml (B) 200–400 ml (C) 500–600 ml (D) 800 ml

Description : Minimum excretory urinary volume for waste products elimination during 24 hrs is (A) 200–300 ml (B) 200–400 ml (C) 500–600 ml (D) 800 ml

Last Answer : Answer : C

Low tension cables are generally used up to (a) 200 V (b) 500 V (c) 700 V (d) 1000 V

Description : Low tension cables are generally used up to (a) 200 V (b) 500 V (c) 700 V (d) 1000 V

Last Answer : (d) 1000 V

Maximum value of transaction for e-SBTR should be _________ A. Rs.1000 B. Rs.2000 C. Rs.3000 D. Rs.5000 E. No limit

Description : Maximum value of transaction for e-SBTR should be _________ A. Rs.1000 B. Rs.2000 C. Rs.3000 D. Rs.5000 E. No limit

Last Answer : E. No limit Explanation: There is no maximum limit.

Minimum value of transaction for e-SBTR should be _______ A. Rs.1000 B. Rs.2000 C. Rs.3000 D. Rs.5000 E. No limit

Description : Minimum value of transaction for e-SBTR should be _______ A. Rs.1000 B. Rs.2000 C. Rs.3000 D. Rs.5000 E. No limit

Last Answer : D. Rs.5000 Explanation: Minimum value of transaction for e-SBTR should be Rs.5,000.

International parcel box rate is a) 1000,1500 & 2500 b) 2000,3000 & 5000 c) 750,1500&2500 d) None of these

Description : International parcel box rate is a) 1000,1500 & 2500 b) 2000,3000 & 5000 c) 750,1500&2500 d) None of these

Last Answer : a) 1000,1500 & 2500

International parcel box rate is a) 1000,1500 & 2500 b) 2000,3000 & 5000 c) 750,1500&2500 d) None of these

Description : International parcel box rate is a) 1000,1500 & 2500 b) 2000,3000 & 5000 c) 750,1500&2500 d) None of these

Last Answer : a) 1000,1500 & 2500

Maximum allowable concentration of CO2 in air for safe working is __________ ppm (parts per million). (A) 50 (B) 1000 (C) 2000 (D) 5000

Description : Maximum allowable concentration of CO2 in air for safe working is __________ ppm (parts per million). (A) 50 (B) 1000 (C) 2000 (D) 5000

Last Answer : (D) 5000

A diffraction grating is optically equivalent to a multiple slit system in which the number of slit , N is typically A.2000/cm B.3000/cm C.5000/cm D.1000/cm

Description : A diffraction grating is optically equivalent to a multiple slit system in which the number of slit , N is typically A.2000/cm B.3000/cm C.5000/cm D.1000/cm

Last Answer : C.5000/cm

Agni 4-- the most potent and technologically advanced among India’s strategic arsenal, has a range of (a) 1000 KM (b) 2000 KM (c) 3000 KM (d) 5000 KM

Description : Agni 4-- the most potent and technologically advanced among India’s strategic arsenal, has a range of (a) 1000 KM (b) 2000 KM (c) 3000 KM (d) 5000 KM

Last Answer : (c) 3000 KM

The value of a single VPMO should not exceed Rs a) 500/- b) 2000/- c) 5000/- d) No limit

Description : The value of a single VPMO should not exceed Rs a) 500/- b) 2000/- c) 5000/- d) No limit

Last Answer : c) 5000/

Formula for established plants to the speed sown based on the dug seed is given by A. CI= [(E×10000) /(D×W) ]×1000 B. CI=[E/(N+E) ]×100 C.Both (A) and (B) D. None of (A) and (B)

Description : Formula for established plants to the speed sown based on the dug seed is given by A. CI= [(E×10000) /(D×W) ]×1000 B. CI=[E/(N+E) ]×100 C.Both (A) and (B) D. None of (A) and (B)

Last Answer : B. CI=[E/(N+E) ]×100

Speed of power operated machine chaff cutter is E. 35 rpm F. 50 rpm G. 600-1000 rpm H. None of the above

Description : Speed of power operated machine chaff cutter is E. 35 rpm F. 50 rpm G. 600-1000 rpm H. None of the above

Last Answer : G. 600-1000 rpm

Speed of band operated machines chaff cutter having two knives F. 35 rpm G. 50 rpm H. 600 rpm I. 1000 rpm

Description : Speed of band operated machines chaff cutter having two knives F. 35 rpm G. 50 rpm H. 600 rpm I. 1000 rpm

Last Answer : F. 35 rpm

peed of a high speed engine is (a) <350 rpm (b) 350-1000 rpm (c) >1000rpm (d) none of the above

Description : peed of a high speed engine is (a) 1000rpm (d) none of the above

Last Answer : (c) >1000rpm

peed of a medium speed engine is (a) <350 rpm (b) 350-1000 rpm (c) >1000rpm (d) none of the above

Description : peed of a medium speed engine is (a) 1000rpm (d) none of the above

Last Answer : (b) 350-1000 rpm

Speed of a low speed engine is (a) <350 rpm (b) 350-1000 rpm (c) >1000rpm (d) none of the above

Description : Speed of a low speed engine is (a) 1000rpm (d) none of the above

Last Answer : (a)