Description : Function of idler pully are a. to increase the angle of contact of belt on pully b. maintain belt tension as belt stretches c. canter to centre distance remain same d. all the above
Last Answer : d. all the above
Description : .308- Life expectancy of V-belt in farm machinery is about.... (a) 200-500 hrs (b) 1000-2000 hrs (c) 2000-5000hrs (d) 5000-10000hrs
Last Answer : (b) 1000-2000 hrs
Description : Piston speed for high speed engine is (a) 300-500 m/min (b) 100-300 m/min (c) 500-700 m/min (d) >700m/min
Last Answer : (a) 300-500 m/min
Description : Speed of the cutter bar in case of combine (grain) is (a)400-550 rpm (b) 500-800rpm (c)800-1000rpm (d) 1000-1200rpm
Last Answer : a)400-550 rpm
Description : Needle bearing a roller bearing having a number of smaller diameter roller is well suited to a) Application involving oscillating motion b) Exceptionally high load capacity application at low peripheral speed c) Both (a) and (b) d) None of the above
Last Answer : c) Both (a) and (b)
Description : hen displacement volume is divided by piston displacement, what will we obtained (a) number of cylinders (b) number of power stroke per minute for all cylinders (c) number of revolution of the crankshaft (engine) (d) number of revolution of crankshaft × number of cylinder
Last Answer : (b) number of power stroke per minute for all cylinders
Description : An alloy contains 36 % of bronze. What quantity of alloy is required to get 340 g of bronze? a) 1500 b) 944.4 c) 950 d) 1000 e) 980.5
Last Answer : Answer: B Let the quantity of alloy required = x g Then 36 % of x =340 g ⇒ 36/100 × x = 340 g x = (340 × 100)/36 g x = 34000/36 g x = 944.4 g
Description : The cutter bar of a tractor operated mower ordinarily makes: A. 800-1200 strokes/min B. 1600-2000 strokes/min C. 2400-2800 strokes/min D. 3200-3600 strokes/min
Last Answer : A. 800-1200 strokes/min
Description : A hammer gains 50 Ns momentum in 0.05 sec. The average force on the hammer will be a.500 N b.2000 N c.1500 N d.107 dynes e.1000 N
Last Answer : e. 1000 N
Description : Match the following : [IAS 1999] A. Cotton 1. Rainfall 1000-1500 mm; Temperature 40°-60°C B. Flax 2. Rainfall 1500-2000 mm; Temperature 25°-35°C C. Sugarbeet 3. Rainfall 600-S00 mm; Temperature 5°-18°C D. Jute 4. Rainfall 500-1000 mm; ... 1 3 4 2 (b) 2 3 5 4 (c) 4 5 2 1 (d) 4 3 5 2 shop.ssbcrack.com
Last Answer : Ans: (d)
Description : Average resistance of human body is: a) 500 ohms b) 1000 ohms c) 1500 ohms d) 2000 ohms
Last Answer : Ans: B
Description : The maximum temperature in the I.C engine cylinder is of the order of a. 500 – 1000 C b. 1000 – 1500 C c. 1500 – 2000 C d. 2000 – 2500 C
Last Answer : ANSWER d. 2000 – 2500 C
Description : If 25 toys cost 500, what would be the cost of 75 toys? A. 2000 B. 1500 101 C. 1200 D. 1700
Last Answer : ANSWER: B
Description : If 25 toys cost 500, what would be the cost of 75 toys? A. 2000 B. 1500 C. 1200 D. 1700
Description : In sewage, the solids in mg per litre is A. 100 to 500 B. 500 to 1000 C. 1000 to 1500 D. 1500 to 2000
Last Answer : ANS: B
Description : For design purposes, the normal rate of infiltration of ground water into the sewer, is A. 500 litres/km/cm B. 1000 litres/km/cm C. 1500 litres/km/cm D. 2000 litres/km/cm
Last Answer : ANS: D
Description : At what distance is VHF propagation normally limited? A. Around 500 miles B. Around 1500 miles C. Around 2000 miles D. Around 1000 miles
Last Answer : A. Around 500 miles
Description : How many minimum tractor hours per year of 40 H.P. power should be used approximately for purely agricultural use and not for custom service unit to become viable unit ? (A) 500 hrs. (B) 600 hrs. (C) 1000 hrs. (D) 1500 hrs. (E) 2000 hrs.
Last Answer : (C) 1000 hrs.
Last Answer : (E) 2000 hrs.
Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500
Last Answer : a. 2500
Description : The total pressure on the surface of a vertical sluice gate 2 m x 1 m with its top 2 m surface being 0.5 m below the water level will be (A) 500 kg (B) 1000 kg (C) 1500 kg (D) 2000 kg
Last Answer : Answer: Option D
Description : Maximum daily traffic capacity of bituminous pavements is (A) 500 tonnes per day (B) 1000 tonnes per day (C) 1500 tonnes per day (D) 2000 tonnes per day
Last Answer : Answer: Option C
Description : A cement concrete road is 1000 m long, 8 m wide and 15 cm thick over the sub-base of 10 cm thick gravel. The box cutting in road crust is (A) 500 m3 (B) 1000 m3 (C) 1500 m3 (D) 2000 m3
Last Answer : (C) 1500 m3
Description : If the excavation of earth is done manually then it costs Rs. 10 per cum. A machine can excavate at a fixed cost of Rs. 4000 plus a variable cost of Rs. 2 per cum. The quantity of earth for which the cost ... the cost of manual excavation is (A) 500 cum (B) 1000 cum (C) 1500 cum (D) 2000 cum
Last Answer : (A) 500 cum
Description : How many mL of a 1:500 w/v stock solution should be used to make 5 liters of 1:2000 w/v solution? (A) 750 mL (B) 1000 mL (c) 1250 mL (D) 1500 mL
Last Answer : (c) 1250 mL
Description : A sum of money is to be distributed among A, B, C, D in the proportion of 5:2:4:3. If C gets Rs. 1000 more than D, what is B's share? A) Rs. 500 B) Rs. 1500 C) Rs. 2000 D) Rs.2500 E) NONE
Last Answer : Answer: C Let the shares of A, B, C, D be Rs. 5x, Rs. 2x, Rs. 4x and Rs. 3x respectively. Then, 4x−3x=1000 ⇒x=1000. B's share =Rs.2x=Rs.(2×1000)= Rs. 2000
Description : Pick out the wrong statement pertaining to the turbine agitator. (A) Recommended peripheral speed for the turbine agitator is 200-250 metres/minute (B) Pitched blade turbine agitator gives only radial flow with ... l/4th of agitator diameter (with central disc, it is l/8th of the agitator diameter)
Last Answer : (B) Pitched blade turbine agitator gives only radial flow with complete absence of the axial flow
Description : A traction fitted with diesel engine will have good slogging ability as lugging ability if it has a reserve of a.500 rpm d.200 rpm c.300 rpm e.1000 rpm
Last Answer : a.500 rpm
Description : A 3.2 m diameter balloon is filled with Helium. The total weight of balloon, gas and pay load is 10 kg kg. In an isothermal atmosphere having conditions identical to N.T.P. the balloon will rise to a height of about a.6000 m b.1500 m c.3000 m d.2000 m e.1000 m
Last Answer : a. 6000 m
Description : power of absorbing type hydraulic dynamometer varies as a) cube of rpm b) fifth power of the diameter c) none of the above d) both (a) and (b)
Last Answer : d) both (a) and (b)
Description : Variation in the drop size of seed can be minimised by (a) Using a short, smooth, small diameter tube with the discharge end close to bottom of furrow. (b) Discharging the seed directly from ... (c) Mechanically transferring the seeds from the metering unit in the furrow. (d) All of the above.
Last Answer : d) All of the above.
Description : pecific energy requirement of rotary tillers can be reduce by a) Increasing the bite length b) Decreasing depth to diameter ratio c) Both (a) and (b) d) Excessive reduction in total power requirement
Description : Detonation is favoured by a. Low crankshaft speed at full throttle b. .Higher loads c. Both (a) and (b) d. None of the above
Last Answer : c. Both (a) and (b)
Description : Coal is heated in presence of air to a temperature of about __________ °C, while determining its ash content for proximate analysis. (A) 500 (B) 750 (C) 950 (D) 1100
Last Answer : (B) 750
Description : In Dry farming, what is the annual rainfall (in mm) available? a. A Less than 550 mm b. B Less than 500 mm c. C Less than 950 mm d. D Less than 750 mm
Last Answer : d. D Less than 750 mm
Description : Fusion zone in the electric furnace used for reduction of phosphate rock to elemental phosphorous is maintained at __________ °C. (A) 250-300 (B) 500-750 (C) 950-1050 (D) 1400-1450
Last Answer : (D) 1400-1450
Description : 2/3 part of the sum is lent out at 3%, 1/6 part is lent out at 6% and remaining part at 12%. All the three parts are lent out at simple interest. If the annual income is Rs. 35, what is the sum? (a) Rs.500 (b) Rs.600 (c) Rs.700 (d) Rs.850 (e) Rs.950
Last Answer : (c) Rs.700
Description : The peripheral velocity at inlet of a centrifugal pump having inlet diameter of 25 cms and rotating at 950 rpm is __________ m/sec. (A) 1.8 (B) 12.4 (C) 186.2 (D) 736.4
Last Answer : (B) 12.4
Description : Force ( including rolling resistance friction ) that acts upon the stabilising surfaces such landslide and sole of bottom are called a) Useful soil resistance b) Parasitic force d) Draft of implement. d) Pull of implement
Last Answer : b) Parasitic force
Description : A father runs after his son, who is 1000 meters ahead. The father runs at a speed of 1 kilometre every 8 minutes, and the son runs at a speed of 1 kilometer every 12 minutes. How much distance has ... father overtakes him? a) 2500 meters b) 2000 meters c) 1500 meters d) 1000 meters e) 1200 meters
Last Answer : Time taken is same for both father and son Let x be the distance son travelled before being overtaken by his father Time taken by son = x/5 km/hour Time taken by father = (1000 + x) / 7.5 km/hr Since, time taken is same x/5 = (1000 + x) / 7.5 or x = 2000m Answer: b)
Description : Two Pelton turbines A and B have the same specific speed and are working under the same head. Turbine A produces 400 kW at 1000 rpm. If turbine B produces 100kW, then its rpm is (a) 4000 (b) 2000 (c) 1500 (d) 3000
Last Answer : (b) 2000
Description : Commercial available medium size machines have a speed range of ______ . (a) 200 to 400 r.p.m. (b) 600 to 1000 r.p.m. (c) 1000 to 1500 r.p.m. (d) 2000 to 2500 r.p.m.
Last Answer : (d) 2000 to 2500 r.p.m.
Description : The average working speed of a hand operated chaff fitted with two knives is _________ rev/min.
Last Answer : 35
Description : In a combine harvester the peripheral speed of the cylinder ranges between ________ m/min.
Last Answer : 1200 to 1500
Description : Optimum speed for grains like gram,pea,etc.,thresher using power is a) 300-400rpm b) 400-600rpm c) 600-800rpm d) 1100-1200rpm
Last Answer : a) 300-400rpm
Description : Optimum operating cylinder speed for wheat threshing using power operated thresher is a) 300-400rpm b) 400-600rpm c) 600-800rpm d) 1100-1200rpm
Last Answer : d) 1100-1200rpm
Description : Optimum operating cylinder speed for the power operated maize sheller is a) 200-400rpm b) 400-600rpm c) 600-800rpm d) 1000-1200rpm
Last Answer : c) 600-800rpm
Description : main function of the current regulator is A. To prevent the reversal flow of current from the battery when dynamo speed is drops. B. To safeguard against flow of high currents to battery when armature develops ... . C. To prevent building up of high voltage in a circuit. D. None of the above
Last Answer : B. To safeguard against flow of high currents to battery when armature develops more current.
Description : Main function of cutout relay in electrical circuit is A. To prevent the reversal of current flow from the battery when dynamo speed (engine speed) reduces. B. To restrict the maximum output at ... deliver current to the battery or to the lightening and ignition circuit. D. None of the above
Last Answer : A. To prevent the reversal of current flow from the battery when dynamo speed (engine speed) reduces.