Land plane is ideally suited for a) Land levelling b) Earth moving c) Final grading d) Top finishing

Land plane is ideally suited for
a) Land levelling
b) Earth moving
c) Final grading
d) Top finishing
by

1 Answer

Answer :

d) Top finishing
by

Related questions

Land plane is ideally suited for: a. Land leveling b. Earth moving c. Final grading d. Top finishing

Description : Land plane is ideally suited for: a. Land leveling b. Earth moving c. Final grading d. Top finishing

Last Answer : d. Top finishing

Curved twisted blades are specially suited for m. Minimum tillage of trashy land at shallow depths n. Dried hard soils o. Cutting and pulverisation in wet sticky clay soil p. For operating on the sides of plant bed

Description : Curved twisted blades are specially suited for m. Minimum tillage of trashy land at shallow depths n. Dried hard soils o. Cutting and pulverisation in wet sticky clay soil p. For operating on the sides of plant bed

Last Answer : p. For operating on the sides of plant bed

shaped blades are best suited for i. Minimum tillage of trashy land at shallow depths j. Dried hard soils k. Cutting and pulverisation in wet sticky clay soil l. Working under normal field conditions

Description : shaped blades are best suited for i. Minimum tillage of trashy land at shallow depths j. Dried hard soils k. Cutting and pulverisation in wet sticky clay soil l. Working under normal field conditions

Last Answer : i. Minimum tillage of trashy land at shallow depths

Hook type blades best suited for e. Minimum tillage of trashy land at shallow depths f. Dried hard soils g. Cutting and pulverisation especially in wet sticky clay soil h. Working under normal field conditions

Description : Hook type blades best suited for e. Minimum tillage of trashy land at shallow depths f. Dried hard soils g. Cutting and pulverisation especially in wet sticky clay soil h. Working under normal field conditions

Last Answer : f. Dried hard soils

0ff-set disc harrows are best suitable to work for a) primary implement b) breaking clods c) orchard cultivation d) surface finishing

Description : 0ff-set disc harrows are best suitable to work for a) primary implement b) breaking clods c) orchard cultivation d) surface finishing

Last Answer : c) orchard cultivation

Subsoiler plough is best suited for a. breaking hard pan b. deep ploughing c. making ditches d. inter cultivation

Description : Subsoiler plough is best suited for a. breaking hard pan b. deep ploughing c. making ditches d. inter cultivation

Last Answer : a. breaking hard pan

A power tiller is most suited for : A. Draft operation with rigid tools B. Rotary cultivation C. Stationary operation D. Transport work

Description : A power tiller is most suited for : A. Draft operation with rigid tools B. Rotary cultivation C. Stationary operation D. Transport work

Last Answer : B. Rotary cultivation

A power tiller is most suited for rotary cultivation because: A. It generates negative draft B. Its traction requirements are low C. It provides high degree of soil pulverization D. All of the above

Description : A power tiller is most suited for rotary cultivation because: A. It generates negative draft B. Its traction requirements are low C. It provides high degree of soil pulverization D. All of the above

Last Answer : D. All of the above

How type furrow (or shovel) opener are especially suited to a. Stoney and root infested fields b. Poorly prepared beds in trashy soil c. Hard field with considerable debris and mulch d. None of the above

Description : How type furrow (or shovel) opener are especially suited to a. Stoney and root infested fields b. Poorly prepared beds in trashy soil c. Hard field with considerable debris and mulch d. None of the above

Last Answer : a. Stoney and root infested fields

Disc type furrow openers are especially suited to A. Stoney and root infested soils B. Poorly prepared bed in trashy soil C. Hard and sticky soil with considerable amount of debris and mulch D. All of the above

Description : Disc type furrow openers are especially suited to A. Stoney and root infested soils B. Poorly prepared bed in trashy soil C. Hard and sticky soil with considerable amount of debris and mulch D. All of the above

Last Answer : C. Hard and sticky soil with considerable amount of debris and mulch

Shoe type furrow openers especially suited to A. Stoney and root infested fields B. Poorly prepared bed in trashy soils C. Hard and sricky soil with considerable amount of mulch and debris D. All of the above

Description : Shoe type furrow openers especially suited to A. Stoney and root infested fields B. Poorly prepared bed in trashy soils C. Hard and sricky soil with considerable amount of mulch and debris D. All of the above

Last Answer : B. Poorly prepared bed in trashy soils

Wood is well suited to use as bearing on straw walker cranks in combine due to fact a) Wood corrosion resistance b) Split bearing are needed for practical purpose c) It can take radial as well as thrust loads d) No lubrication is required

Description : Wood is well suited to use as bearing on straw walker cranks in combine due to fact a) Wood corrosion resistance b) Split bearing are needed for practical purpose c) It can take radial as well as thrust loads d) No lubrication is required

Last Answer : b) Split bearing are needed for practical purpose

Needle bearing a roller bearing having a number of smaller diameter roller is well suited to a) Application involving oscillating motion b) Exceptionally high load capacity application at low peripheral speed c) Both (a) and (b) d) None of the above

Description : Needle bearing a roller bearing having a number of smaller diameter roller is well suited to a) Application involving oscillating motion b) Exceptionally high load capacity application at low peripheral speed c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

V-shaped sweeps are best suited for a ) Primary tillage b) Stubble mulch tillage c) Rotary tillage d) Minimum tillage

Description : V-shaped sweeps are best suited for a ) Primary tillage b) Stubble mulch tillage c) Rotary tillage d) Minimum tillage

Last Answer : b) Stubble mulch tillage

The sugar industry is ideally suited for the cooperative sector. Why? -Geography

Description : The sugar industry is ideally suited for the cooperative sector. Why? -Geography

Last Answer : Sugarcane cultivation is seasonal hence the production too is seasonal. The farmers are engaged in the cultivation of the sugarcane, and when it is reaped, a cluster of farmers set up a ... together. Hence it is a cooperative sector. The cooperative formation has been successful in Maharashtra.

Which industry, due to its seasonal nature, is ideally suited to the cooperative sector? -SST 10th

Description : Which industry, due to its seasonal nature, is ideally suited to the cooperative sector? -SST 10th

Last Answer : This answer was deleted by our moderators...

Why is sugar industry ideally suited to the cooperative sector? -SST 10th

Description : Why is sugar industry ideally suited to the cooperative sector? -SST 10th

Last Answer : (i) The sugar industry is seasonal in nature and so is ideally suited to the cooperative sector. (ii) For entire year the farmers are engaged in producing sugarcane as it is an annual ... nature of the sugar industry is combated by setting up cooperative where farmers share the profits and losses.

Pick out the wrong statement. (A) A soft magnetic material should have high permeability and small area of hysteresis loop (B) Poisson's ratio of high melting point metals is more than unity (C) Solders generally melt at less than 185°C (D) Steel produced by B.O.F process is ideally suited for manufacturing flat product

Description : Pick out the wrong statement. (A) A soft magnetic material should have high permeability and small area of hysteresis loop (B) Poisson's ratio of high melting point metals is more than unity (C) ... less than 185°C (D) Steel produced by B.O.F process is ideally suited for manufacturing flat product

Last Answer : Option B

Project management is ideally suited for a business environment requiring all of the following except _________. A. Flexibility B. Innovation C. speed D. Repetability

Description : Project management is ideally suited for a business environment requiring all of the following except _________. A. Flexibility B. Innovation C. speed D. Repetability

Last Answer : A. Flexibility

Division operation is ideally suited to handle queries of the type : (A) customers who have no account in any of the branches in Delhi. (B) customers who have an account at all branches in Delhi. (C) customers who have an account in atleast one branch in Delhi. (D) customers who have only joint account in any one branch in Delhi

Description : Division operation is ideally suited to handle queries of the type : (A) customers who have no account in any of the branches in Delhi. (B) customers who have an account at all branches in Delhi. ( ... atleast one branch in Delhi. (D) customers who have only joint account in any one branch in Delhi

Last Answer : (B) customers who have an account at all branches in Delhi. 

Worm gears are used for transmitting power between two shafts a)at right angle to each other and cannot intersect each other b) at right angle to each other and can intersect each other c)at angle to each other d)shafts on different plane

Description : Worm gears are used for transmitting power between two shafts a)at right angle to each other and cannot intersect each other b) at right angle to each other and can intersect each other c)at angle to each other d)shafts on different plane

Last Answer : a)at right angle to each other and cannot intersect each other

illage tool moving with uniform velocity is subjected to A)force of gravity. B)pull of power source C)soil reaction. D)all of the above

Description : illage tool moving with uniform velocity is subjected to A)force of gravity. B)pull of power source C)soil reaction. D)all of the above

Last Answer : D)all of the above

Forces which a tool must overcome in cutting, breaking and moving the soil is called a) Useful soil resistance b) Parasitic force c) Draft of implement d) Pull of implement

Description : Forces which a tool must overcome in cutting, breaking and moving the soil is called a) Useful soil resistance b) Parasitic force c) Draft of implement d) Pull of implement

Last Answer : a) Useful soil resistance

A Tillage implement moving at a constant velocity is subjected to a) Force of gravity b) Soil force (resistance) c) Pull of mower d) All of the above

Description : A Tillage implement moving at a constant velocity is subjected to a) Force of gravity b) Soil force (resistance) c) Pull of mower d) All of the above

Last Answer : d) All of the above

.The land side of a mould board plough is made of: A. Malleable iron B. Forged steel C. C45 steel D. Soft Centre steel

Description : .The land side of a mould board plough is made of: A. Malleable iron B. Forged steel C. C45 steel D. Soft Centre steel

Last Answer : D. Soft Centre steel

Land shaping becomes essential where often the following implement is used a) M.B. Plough b) Disc plough c) Cultivator d) All of the above

Description : Land shaping becomes essential where often the following implement is used a) M.B. Plough b) Disc plough c) Cultivator d) All of the above

Last Answer : a) M.B. Plough

Lister plows especially suitable for a.) Dry land agriculture. b.) Breaking hard pan. c.) Earthing plants. d.) Mulching.

Description : Lister plows especially suitable for a.) Dry land agriculture. b.) Breaking hard pan. c.) Earthing plants. d.) Mulching.

Last Answer : a.) Dry land agriculture.

.Increase length of a land slide of a one bottom right hand mould board plough will a) Increase the amount of offset on tractor b) Decrease the amount of offset c) No affect d) Affect Completely

Description : .Increase length of a land slide of a one bottom right hand mould board plough will a) Increase the amount of offset on tractor b) Decrease the amount of offset c) No affect d) Affect Completely

Last Answer : c) No affect

.Land shipping become necessary often the following implments is used: a. MB plough b. Disc harrow c. Cultivator d. All of these

Description : .Land shipping become necessary often the following implments is used: a. MB plough b. Disc harrow c. Cultivator d. All of these

Last Answer : a. MB plough

A dry land weeder covers an area (in hactare) per day (8 hour): A)0.1 b)0.2 C)0.3 c)0.4

Description : A dry land weeder covers an area (in hactare) per day (8 hour): A)0.1 b)0.2 C)0.3 c)0.4

Last Answer : b)0.2

Land shaping becomes essential where often the following implement is used a) M.B. Plough b) Disc Harrow c) Cultivator d) All of the above

Description : Land shaping becomes essential where often the following implement is used a) M.B. Plough b) Disc Harrow c) Cultivator d) All of the above

Last Answer : a) M.B. Plough

A power tiller is relatively more suitable for : A. Puddling of low land paddy fields with a rotary tiller B. Primary tillage of upland paddy fields with a rotary tillers C. Primary tillage with a mould board plough D. Farm transportation work

Description : A power tiller is relatively more suitable for : A. Puddling of low land paddy fields with a rotary tiller B. Primary tillage of upland paddy fields with a rotary tillers C. Primary tillage with a mould board plough D. Farm transportation work

Last Answer : A. Puddling of low land paddy fields with a rotary tiller

A relative short and broad mould board is curved rather abruptly near the top resulting in a greater degree of pulverization is called a. Sod bottom b. Stubble bottom b. General bottom d. Slat bottom

Description : A relative short and broad mould board is curved rather abruptly near the top resulting in a greater degree of pulverization is called a. Sod bottom b. Stubble bottom b. General bottom d. Slat bottom

Last Answer : b. General bottom

GOOD EARTH is one of the important make of (A) tractor (B) electric motor (C) diesel engine (D)power tiller

Description : GOOD EARTH is one of the important make of (A) tractor (B) electric motor (C) diesel engine (D)power tiller

Last Answer : A) tractor

Seating the brushes on a D.C. motor is first accomplished using ________________. A. a file for cutting the approximate curvature followed by sandpaper for the final fit B. sandpaper with the motor not operating and then a seating stone while running the machine C. emery paper for the initial cut and crocus cloth for the finishing cut D. course lapping compound, followed by a medium and then a fine grade

Description : Seating the brushes on a D.C. motor is first accomplished using ________________. A. a file for cutting the approximate curvature followed by sandpaper for the final fit B. sandpaper with the motor not ... for the finishing cut D. course lapping compound, followed by a medium and then a fine grade

Last Answer : Answer: B

The final operation of finishing floors, is known as (A) Screeding (B) Floating (C) Trowelling (D) Finishing

Description : The final operation of finishing floors, is known as (A) Screeding (B) Floating (C) Trowelling (D) Finishing

Last Answer : (C) Trowelling

In setting up a plane table at any station (A) Levelling is done first (B) Centering is done first (C) Both levelling and centering are done simultaneously (D) Orientation is done first

Description : In setting up a plane table at any station (A) Levelling is done first (B) Centering is done first (C) Both levelling and centering are done simultaneously (D) Orientation is done first

Last Answer : (C) Both levelling and centering are done simultaneously

The type of surveying which requires least office work is (A) Tachometry (B) Trigonometrical levelling (C) Plane table surveying (D) Theodolite surveying

Description : The type of surveying which requires least office work is (A) Tachometry (B) Trigonometrical levelling (C) Plane table surveying (D) Theodolite surveying

Last Answer : (C) Plane table surveying

The operation of revolving a plane table about its vertical axis so that all lines on the sheet become parallel to corresponding lines on the ground, is known (A) Levelling (B) Centering (C) Orientation (D) Setting

Description : The operation of revolving a plane table about its vertical axis so that all lines on the sheet become parallel to corresponding lines on the ground, is known (A) Levelling (B) Centering (C) Orientation (D) Setting

Last Answer : (C) Orientation

Subtense bar is an instrument used for (A) Levelling (B) Measurement of horizontal distances in plane areas (C) Measurement of horizontal distances in undulated areas (D) Measurement of angles

Description : Subtense bar is an instrument used for (A) Levelling (B) Measurement of horizontal distances in plane areas (C) Measurement of horizontal distances in undulated areas (D) Measurement of angles

Last Answer : (C) Measurement of horizontal distances in undulated areas

After fixing the plane table to the tripod, the main operations which are needed at each plane table station are (i) Levelling (ii) Orientation (iii) Centering The correct sequence of these operations is (A) (i), (ii), (iii) (B) (i), (iii), (ii) (C) (iii), (i), (ii) (D) (ii), (iii), (i)

Description : After fixing the plane table to the tripod, the main operations which are needed at each plane table station are (i) Levelling (ii) Orientation (iii) Centering The correct sequence of these operations is (A) (i), (ii), (iii) (B) (i), (iii), (ii) (C) (iii), (i), (ii) (D) (ii), (iii), (i)

Last Answer : (B) (i), (iii), (ii)

In Opitz system, 2nd digit indicates a.Type and Shape b.External shape and external shape elements c.External plane surface finishing d.Auxiliary hole and gear teeth

Description : In Opitz system, 2nd digit indicates a.Type and Shape b.External shape and external shape elements c.External plane surface finishing d.Auxiliary hole and gear teeth

Last Answer : b.External shape and external shape elements

While viewing through a level telescope and moving the eye slightly, a relative movement occurs between the image of the levelling staff and the cross hairs. The instrument is (A) Correctly focussed (B) Not correctly focussed (C) Said to have parallax (D) Free from parallax

Description : While viewing through a level telescope and moving the eye slightly, a relative movement occurs between the image of the levelling staff and the cross hairs. The instrument is (A) Correctly focussed (B) Not correctly focussed (C) Said to have parallax (D) Free from parallax

Last Answer : (C) Said to have parallax

Communication in an organization should ideally flow (a) From top to bottom (b) from bottom to top (c) Both ways (d) None of these

Description : Communication in an organization should ideally flow (a) From top to bottom (b) from bottom to top (c) Both ways (d) None of these

Last Answer : (c) Both ways

Better classroom management means (a) per group work and better interaction among pupils (b) prior preparation of teacher in the making of suitable aids (c) Punctuality of the teachers in coming in the class and finishing the course in time (d) Getting the attention and cooperation of all the students before starting the class/ task (e) Moving around the room to identify pupils having or creating problems (f) Avoid teaching when pupils are not in proper mood (g) All of these

Description : Better classroom management means (a) per group work and better interaction among pupils (b) prior preparation of teacher in the making of suitable aids (c) Punctuality of the teachers in coming in the ... creating problems (f) Avoid teaching when pupils are not in proper mood (g) All of these

Last Answer : (g) All of these

Which of the following equipment is not used under Land Levelling? [a] Scoop [b] Buck Scraper [c] U-Leveler [d] Float Leveler [e] Khurp

Description : Which of the following equipment is not used under Land Levelling? [a] Scoop [b] Buck Scraper [c] U-Leveler [d] Float Leveler [e] Khurp

Last Answer : [e] Khurpi

verticalsuctioninmouldboardploughis______whereashorizontalsuctionis______

Description : verticalsuctioninmouldboardploughis______whereashorizontalsuctionis______

Last Answer : .0.3to0.5cm,0.5cm

Byincreasingdiskangle,depthpenetration_____beoverwithofcut_______

Description : Byincreasingdiskangle,depthpenetration_____beoverwithofcut_______

Last Answer : .decreases,increases

A paddy transplanter uses either root wash type seedlings or __________ seedlings.

Description : A paddy transplanter uses either root wash type seedlings or __________ seedlings.

Last Answer : soil bearing