Worm gear are used for transmitting power between two Shaft Inclined at e. At right angle to each other and axes can intersect f. At right angle to each other but axis cannot intersect each other g. At right angle to each other and in different planes h. None of the above

Worm gear are used for transmitting power between two   Shaft Inclined at
e. At right angle to each other and axes can intersect
f. At right angle to each other but axis cannot intersect each other g. At right angle to each other and in different planes  
h. None of the above
by

1 Answer

Answer :

f. At right angle to each other but axis cannot intersect each other
by

Related questions

Spiral gear are used for transmitting power between two shaft Inclined at a. Right angle to each other and axes can intersect b. Right angle to each other and axes cannot intersect c. At angle slightly lesser or greater than 90 of axles can meet d. None of the above

Description : Spiral gear are used for transmitting power between two shaft Inclined at a. Right angle to each other and axes can intersect b. Right angle to each other and axes cannot intersect c. At angle slightly lesser or greater than 90 of axles can meet d. None of the above

Last Answer : c. At angle slightly lesser or greater than 90 of axles can meet

Worm gears are used for transmitting power between two shafts a)at right angle to each other and cannot intersect each other b) at right angle to each other and can intersect each other c)at angle to each other d)shafts on different plane

Description : Worm gears are used for transmitting power between two shafts a)at right angle to each other and cannot intersect each other b) at right angle to each other and can intersect each other c)at angle to each other d)shafts on different plane

Last Answer : a)at right angle to each other and cannot intersect each other

Spiral gear Is used to transmit power between two shafts place at: a)An angle to each other b)In different planes c)Both(a)and(b) d)None of the above

Description : Spiral gear Is used to transmit power between two shafts place at: a)An angle to each other b)In different planes c)Both(a)and(b) d)None of the above

Last Answer : c)Both(a)and(b)

Operating pressure of power operated sprayer E. 1-7 kg/cm2 F. 10-20 kg/cm2+ G. 20-55 kg/cm2 H. >55 kg/cm2

Description : Operating pressure of power operated sprayer E. 1-7 kg/cm2 F. 10-20 kg/cm2+ G. 20-55 kg/cm2 H. >55 kg/cm2

Last Answer : G. 20-55 kg/cm2

Differential lock offers advantage of E. Threshing efficiency of thresher (power operated) F. Capacity of chaff cutters G. Cleaning capacity of straw walkers H. None of the above

Description : Differential lock offers advantage of E. Threshing efficiency of thresher (power operated) F. Capacity of chaff cutters G. Cleaning capacity of straw walkers H. None of the above

Last Answer : F. Capacity of chaff cutters

Speed of power operated machine chaff cutter is E. 35 rpm F. 50 rpm G. 600-1000 rpm H. None of the above

Description : Speed of power operated machine chaff cutter is E. 35 rpm F. 50 rpm G. 600-1000 rpm H. None of the above

Last Answer : G. 600-1000 rpm

The cutter bar of a tractor operated mower ordinarily makes: A. Near the front axis B. 40mm towards the real axis C. At the power take off shaft D. Between the two lower Links

Description : The cutter bar of a tractor operated mower ordinarily makes: A. Near the front axis B. 40mm towards the real axis C. At the power take off shaft D. Between the two lower Links

Last Answer : D. Between the two lower Links

Flooding nozzles are generally operated with (a) Axis vertical (b) Axis horizontal (c) Inclined (d) None of the above

Description : Flooding nozzles are generally operated with (a) Axis vertical (b) Axis horizontal (c) Inclined (d) None of the above

Last Answer : (a) Axis vertical

Hook type blades best suited for e. Minimum tillage of trashy land at shallow depths f. Dried hard soils g. Cutting and pulverisation especially in wet sticky clay soil h. Working under normal field conditions

Description : Hook type blades best suited for e. Minimum tillage of trashy land at shallow depths f. Dried hard soils g. Cutting and pulverisation especially in wet sticky clay soil h. Working under normal field conditions

Last Answer : f. Dried hard soils

The type of restrained three point linkage system in which the depth of implement is automatically adjusted to maintain a pre selected constant draft is called : E. Automatic draft control system F. Precision control system G. Depth control system H. None of the above

Description : The type of restrained three point linkage system in which the depth of implement is automatically adjusted to maintain a pre selected constant draft is called : E. Automatic draft control system F. Precision control system G. Depth control system H. None of the above

Last Answer : E. Automatic draft control system

Operating pressure of the hand operated sprayer is E. 20-55 kg/cm2 F. 1-7 kg/cm2 G. 10-20 kg/cm2 H. >55 kg/cm2

Description : Operating pressure of the hand operated sprayer is E. 20-55 kg/cm2 F. 1-7 kg/cm2 G. 10-20 kg/cm2 H. >55 kg/cm2

Last Answer : F. 1-7 kg/cm2

Juice extraction capacity of vertical three roller type bullock down sugercane crusher E. 50-70% F. 70-90% G. 90-100% H. 30-50%

Description : Juice extraction capacity of vertical three roller type bullock down sugercane crusher E. 50-70% F. 70-90% G. 90-100% H. 30-50%

Last Answer : E. 50-70%

Length of cut for silage ranges from E. 2-4 cm F. 5-10 cm G. 15-20 cm H. 20-25 cm

Description : Length of cut for silage ranges from E. 2-4 cm F. 5-10 cm G. 15-20 cm H. 20-25 cm

Last Answer : E. 2-4 cm

Speed of band operated machines chaff cutter having two knives F. 35 rpm G. 50 rpm H. 600 rpm I. 1000 rpm

Description : Speed of band operated machines chaff cutter having two knives F. 35 rpm G. 50 rpm H. 600 rpm I. 1000 rpm

Last Answer : F. 35 rpm

The locus of the moment of inertia about inclined axes to the principal axis, is (A) Straight line (B) Parabola (C) Circle (D) Ellipse

Description : The locus of the moment of inertia about inclined axes to the principal axis, is  (A) Straight line  (B) Parabola  (C) Circle  (D) Ellipse

Last Answer : (D) Ellipse

A flange coupling is used to connect two shafts A. Which are perfectly aligned B. Which are not in exact alignment C. Have lateral misalignment D. Whose axes intersect at a small angle

Description : A flange coupling is used to connect two shafts A. Which are perfectly aligned B. Which are not in exact alignment C. Have lateral misalignment D. Whose axes intersect at a small angle

Last Answer : A. Which are perfectly aligned

Oldham coupling is used to connect two shafts A. Which are perfectly aligned B. Which are not in exact alignment C. Which have lateral misalignment D. Whose axes intersect at a small angle

Description : Oldham coupling is used to connect two shafts A. Which are perfectly aligned B. Which are not in exact alignment C. Which have lateral misalignment D. Whose axes intersect at a small angle

Last Answer : C. Which have lateral misalignment

A universal coupling is used to connect two shafts A. Which are not in exact alignment B. Which are perfectly aligned C. Whose axes intersect at a small angle D. Have lateral misalignment

Description : A universal coupling is used to connect two shafts A. Which are not in exact alignment B. Which are perfectly aligned C. Whose axes intersect at a small angle D. Have lateral misalignment

Last Answer : C. Whose axes intersect at a small angle

ABCD is a parallelogram. The diagonals AC and BD intersect at the point O. If E, F, G and H are the mid-points of AO, DO, CO and BO respectively -Maths 9th

Description : ABCD is a parallelogram. The diagonals AC and BD intersect at the point O. If E, F, G and H are the mid-points of AO, DO, CO and BO respectively -Maths 9th

Last Answer : answer:

The virtual hitch point of a directional implement is located at: a) Near the front axle b) 40 mm towards the rear axle c) At the power take off shaft d) Between two lower links

Description : The virtual hitch point of a directional implement is located at: a) Near the front axle b) 40 mm towards the rear axle c) At the power take off shaft d) Between two lower links

Last Answer : d) Between two lower links

Cut-off device is not required with (a) Inclined plate metering (b) Horizontally plate metering (c) Vertically plate metering (d) All of the above

Description : Cut-off device is not required with (a) Inclined plate metering (b) Horizontally plate metering (c) Vertically plate metering (d) All of the above

Last Answer : (a) Inclined plate metering

Seed damage due to cut-off not a problem in (a) Horizontal plate metering mechanism (b) Vertical plate metering mechanism (c) Both (a) and (b) (d) Inclined plate metering mechanism

Description : Seed damage due to cut-off not a problem in (a) Horizontal plate metering mechanism (b) Vertical plate metering mechanism (c) Both (a) and (b) (d) Inclined plate metering mechanism

Last Answer : (d) Inclined plate metering mechanism

Improved uniformity is obtained if seed tube is inclined rear ward at _________ with vertical. a)5-15° b)15-30° c)30-40° d)40-50

Description : Improved uniformity is obtained if seed tube is inclined rear ward at _________ with vertical. a)5-15° b)15-30° c)30-40° d)40-50

Last Answer : b)15-30°

Engine power output is a function of A. Crank shaft torque B. Speed C. Both (A) and (B) D. None of the above

Description : Engine power output is a function of A. Crank shaft torque B. Speed C. Both (A) and (B) D. None of the above

Last Answer : Engine power output is a function of A. Crank shaft torque B. Speed C. Both (A) and (B) D. None of the above

In an epicycle gear reduction unit, the ratio of the number of teeth of the internal gears to the sun gear is: a) 3:1 b) 4:1 c) 2.5:1 d) 4.5:1

Description : In an epicycle gear reduction unit, the ratio of the number of teeth of the internal gears to the sun gear is: a) 3:1 b) 4:1 c) 2.5:1 d) 4.5:1

Last Answer : b) 4:1

Gears are generally used in the transmission box are ∙ spur gear only ∙ helical gear only ∙ helical and spur gear gears ∙ bevel gears

Description : Gears are generally used in the transmission box are ∙ spur gear only ∙ helical gear only ∙ helical and spur gear gears ∙ bevel gears

Last Answer : ∙ helical gear only

tractors are generally fitted with: A)sliding mesh gear box B)constant mesh gear box C)both (a) & (b) D)synchromesh gear box

Description : tractors are generally fitted with: A)sliding mesh gear box B)constant mesh gear box C)both (a) & (b) D)synchromesh gear box

Last Answer : A)sliding mesh gear box

Two shafts in torsion will have equal strength if a. Only diameter of the shafts is same b. Only angle of twist of the shaft is same c. Only material of the shaft is same d. Only torque transmitting capacity of the shaft is same

Description : Two shafts in torsion will have equal strength if a. Only diameter of the shafts is same b. Only angle of twist of the shaft is same c. Only material of the shaft is same d. Only torque transmitting capacity of the shaft is same

Last Answer : d. Only torque transmitting capacity of the shaft is same

If `hat(a), hat(b) and hat(c)` are unit vector inclined to each other at an angle of `pi/3` then the absolute value of `[hat(a)+hat(b) hat(b)+hat(c) h

Description : If `hat(a), hat(b) and hat(c)` are unit vector inclined to each other at an angle of `pi/3` then the absolute value of `[hat(a)+hat(b) hat(b)+hat(c) h

Last Answer : If `hat(a), hat(b) and hat(c)` are unit vector inclined to each other at an angle of `pi/3` then the ... A. `sqrt2` B. `sqrt3` C. `3sqrt2` D. `2sqrt3`

Which of the following relations is used to represent theorem of perpendicular axes? (H = Vertical axis, I = Moment of inertia and K = Radius of gyration) a. IPQ = Ixx + AH2 b. IPQ = Ixx + Ak2 c. Izz = Ixx + Iyy d. Izz + Ixx + Iyy = 0

Description : Which of the following relations is used to represent theorem of perpendicular axes? (H = Vertical axis, I = Moment of inertia and K = Radius of gyration) a. IPQ = Ixx + AH2 b. IPQ = Ixx + Ak2 c. Izz = Ixx + Iyy d. Izz + Ixx + Iyy = 0

Last Answer : c. Izz = Ixx + Iyy

A sphere rolls down on two inclined planes of different angles but same height, it does so – (1) in the same time (2) with the same speed (3) in the same time with the same speed (4) in the same time with the same kinetic energy

Description : A sphere rolls down on two inclined planes of different angles but same height, it does so – (1) in the same time (2) with the same speed (3) in the same time with the same speed (4) in the same time with the same kinetic energy

Last Answer : (2) with the same speed Explanation: The velocity of the sphere at the bottom depends only on height and acceleration due to gravity. Both these values are constants. Therefore, the velocity at the bottom ... . The kinetic energy will be the same. What will differ is time taken to reach the bottom.

A sphere rolls down on two inclined planes of different angles but same height, it does so (1) in the same time (2) with the same speed (3) in the same time with the same speed (4) in the same time with the same kinetic energy

Description : A sphere rolls down on two inclined planes of different angles but same height, it does so (1) in the same time (2) with the same speed (3) in the same time with the same speed (4) in the same time with the same kinetic energy

Last Answer : with the same speed

Knuckle Joint is used to connect the two rods whose axes are coincide or intersect and lies in the same plane. A. True B. False

Description : Knuckle Joint is used to connect the two rods whose axes are coincide or intersect and lies in the same plane. A. True B. False

Last Answer : A. True

The coordinates of the points where 2x + 5y – 10 =0 meets y axis is e) (0 , 2) f) (0 , -2) g) (2 , 2) h) (-2 , -2)

Description : The coordinates of the points where 2x + 5y – 10 =0 meets y axis is e) (0 , 2) f) (0 , -2) g) (2 , 2) h) (-2 , -2)

Last Answer : e) (0 , 2)

Curve `b^(2)x^(2) + a^(2)y^(2) = a^(2)b^(2) and m^(2)x^(2)- y^(2)l^(2) = l^(2)m^(2)` intersect each other at right-angle if:

Description : Curve `b^(2)x^(2) + a^(2)y^(2) = a^(2)b^(2) and m^(2)x^(2)- y^(2)l^(2) = l^(2)m^(2)` intersect each other at right-angle if:

Last Answer : Curve `b^(2)x^(2) + a^(2)y^(2) = a^(2)b^(2) and m^(2)x^(2)- y^(2)l^(2) = l^(2)m^(2)` intersect each ... ^(2)+m^(2)` D. `a^(2)+b^(2) = l^(2)-m^(2)`

A power transmitting ductile material shaft under P, T and M will be designed on the basis of (a) Rankine theory (b) Guest Theory (c) Haigh theory (d) None

Description : A power transmitting ductile material shaft under P, T and M will be designed on the basis of (a) Rankine theory (b) Guest Theory (c) Haigh theory (d) None

Last Answer : (b) Guest Theory

A power transmitting ductile material shaft under P, T and M will fail under (a) Tensile considerations only (b) Compressive considerations only (c) Shear considerations only (d) None

Description : A power transmitting ductile material shaft under P, T and M will fail under (a) Tensile considerations only (b) Compressive considerations only (c) Shear considerations only (d) None

Last Answer : (c) Shear considerations only

Air output of a duster is given by formula a) Q= 60×A×V b)Q= 60×A×(2GH/Y) c) Q= 240×A×h d) all of the above

Description : Air output of a duster is given by formula a) Q= 60×A×V b)Q= 60×A×(2GH/Y) c) Q= 240×A×h d) all of the above

Last Answer : d) all of the above

2m combine is operating at 4 kmph with an overall efficiency of 75%. The area covered by in(ha\h) will be: a. 0.4 b. 0.6 c. 0.8 d. 1.0

Description : 2m combine is operating at 4 kmph with an overall efficiency of 75%. The area covered by in(ha\h) will be: a. 0.4 b. 0.6 c. 0.8 d. 1.0

Last Answer : b. 0.6

a squar ABCD in which AC =BE when BC produced .A is joined to E prove that FG=GE when AE intersect BD at F and CD at G -Maths 9th

Description : a squar ABCD in which AC =BE when BC produced .A is joined to E prove that FG=GE when AE intersect BD at F and CD at G -Maths 9th

Last Answer : Please give the figure to get your answer, as it is necessary to have figure to answer the question related to geometry.

a squar ABCD in which AC =BE when BC produced .A is joined to E prove that FG=GE when AE intersect BD at F and CD at G -Maths 9th

Description : a squar ABCD in which AC =BE when BC produced .A is joined to E prove that FG=GE when AE intersect BD at F and CD at G -Maths 9th

Last Answer : Please give the figure to get your answer, as it is necessary to have figure to answer the question related to geometry.

A object moves with uniform positive acceleration. Its velocity-time graph will be (a) A straight line parallel to the time axis (b) A straight line inclined at an obtuse angle to the time axis (c) A straight line inclined at an acute angle to the time axis (d) None of these. -Science

Description : A object moves with uniform positive acceleration. Its velocity-time graph will be (a) A straight line parallel to the time axis (b) A straight line inclined at an obtuse angle to the time axis (c) A straight line inclined at an acute angle to the time axis (d) None of these. -Science

Last Answer : Answer is (c)

In an offset disc harrow the angle between two gang is a) less than 90 degree b) 90 degree c) greater than 90 degree d) 180degree

Description : In an offset disc harrow the angle between two gang is a) less than 90 degree b) 90 degree c) greater than 90 degree d) 180degree

Last Answer : a) less than 90 degre

Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above

Description : Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above

Last Answer : A)ldler pulley

Function of idler pully are a. to increase the angle of contact of belt on pully b. maintain belt tension as belt stretches c. canter to centre distance remain same d. all the above

Description : Function of idler pully are a. to increase the angle of contact of belt on pully b. maintain belt tension as belt stretches c. canter to centre distance remain same d. all the above

Last Answer : d. all the above

swirl plate in the cone nozzle is provided to. a. Impart rotational motion to the liquid passing through it. b. To increase the droplet size. c. To decrease the droplet size. d. To increase the spray angle.

Description : swirl plate in the cone nozzle is provided to. a. Impart rotational motion to the liquid passing through it. b. To increase the droplet size. c. To decrease the droplet size. d. To increase the spray angle.

Last Answer : a. Impart rotational motion to the liquid passing through it.

Flooding nozzle have spray angle a) 100-150 b) 90-100 c) 60-95 d) 30-45

Description : Flooding nozzle have spray angle a) 100-150 b) 90-100 c) 60-95 d) 30-45

Last Answer : a) 100-150

Spary angle for fan nozzle and hollow cone nozzle a) 40-50 b) 50-60 c) 60-95 d) 100-150

Description : Spary angle for fan nozzle and hollow cone nozzle a) 40-50 b) 50-60 c) 60-95 d) 100-150

Last Answer : c) 60-95

Hollow cone nozzles employed on boom type of sprayers have spray angle between : A .30-60° B.40-60° C.60-95° D.100-150°

Description : Hollow cone nozzles employed on boom type of sprayers have spray angle between : A .30-60° B.40-60° C.60-95° D.100-150°

Last Answer : C.60-95°

Durability of the fertilizer increases with a) Increase in the kinetic angle of repose b) Decrease in the kinetic angle of repose c) Decrease in the speed of the forward travel d) None of the above

Description : Durability of the fertilizer increases with a) Increase in the kinetic angle of repose b) Decrease in the kinetic angle of repose c) Decrease in the speed of the forward travel d) None of the above

Last Answer : b) Decrease in the kinetic angle of repose