Description : Worm gear are used for transmitting power between two Shaft Inclined at e. At right angle to each other and axes can intersect f. At right angle to each other but axis cannot intersect each other g. At right angle to each other and in different planes h. None of the above
Last Answer : f. At right angle to each other but axis cannot intersect each other
Description : Spiral gear are used for transmitting power between two shaft Inclined at a. Right angle to each other and axes can intersect b. Right angle to each other and axes cannot intersect c. At angle slightly lesser or greater than 90 of axles can meet d. None of the above
Last Answer : c. At angle slightly lesser or greater than 90 of axles can meet
Description : Worm gears are used for transmitting power between two shafts a)at right angle to each other and cannot intersect each other b) at right angle to each other and can intersect each other c)at angle to each other d)shafts on different plane
Last Answer : a)at right angle to each other and cannot intersect each other
Description : Chain drives are stable for a) Constant speed ratio between parallel shafts b) Distance between centre to centre is moderate c) Dirty and dusty environment d) All of the above
Last Answer : d) All of the above
Description : ears commonly used on fuel injection pumps are a. Spur gears b. helical gears c. rack and pinion d. spiral gears
Last Answer : c. rack and pinion
Description : A long jow mould board with a gradual twist (spiral) that completely inverts the furrow slice with a minimum of break up thus covering vegetative matter thoroughly is called a. Sod bottom b. Stubble bottom c. General bottom d. Slat bottom
Last Answer : a. Sod bottom
Description : tractors are generally fitted with: A)sliding mesh gear box B)constant mesh gear box C)both (a) & (b) D)synchromesh gear box
Last Answer : A)sliding mesh gear box
Description : The formula for tension difference or effective pull, required to transmit the load at.... (a) (Tt-Ts)=1000(kw/V) (b) Tt/Ts=c^ke (c) (Tt-Ts)= 1000(Hp/V) (d) None of the above
Last Answer : (a) (Tt-Ts)=1000(kw/V)
Description : In an epicycle gear reduction unit, the ratio of the number of teeth of the internal gears to the sun gear is: a) 3:1 b) 4:1 c) 2.5:1 d) 4.5:1
Last Answer : b) 4:1
Description : Gears are generally used in the transmission box are ∙ spur gear only ∙ helical gear only ∙ helical and spur gear gears ∙ bevel gears
Last Answer : ∙ helical gear only
Description : Penetration of disc plough can be improved by a) Increase disc angle b) Decreasing tilt angle c) Both (a) and (b) d) None of the above
Last Answer : b) Decreasing tilt angle
Description : A knuckle joint is unsuitable for two rotating shafts, which transmit torque a) True b) False
Last Answer : a) True
Description : What would you do if the pilots of the plane are dead and the plane's locked in a death spiral down to the middle of the pacific with it's engines detached?
Last Answer : I suppose that I would die, horribly.
Description : In an offset disc harrow the angle between two gang is a) less than 90 degree b) 90 degree c) greater than 90 degree d) 180degree
Last Answer : a) less than 90 degre
Description : Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above
Last Answer : A)ldler pulley
Description : Function of idler pully are a. to increase the angle of contact of belt on pully b. maintain belt tension as belt stretches c. canter to centre distance remain same d. all the above
Last Answer : d. all the above
Description : swirl plate in the cone nozzle is provided to. a. Impart rotational motion to the liquid passing through it. b. To increase the droplet size. c. To decrease the droplet size. d. To increase the spray angle.
Last Answer : a. Impart rotational motion to the liquid passing through it.
Description : Flooding nozzle have spray angle a) 100-150 b) 90-100 c) 60-95 d) 30-45
Last Answer : a) 100-150
Description : Spary angle for fan nozzle and hollow cone nozzle a) 40-50 b) 50-60 c) 60-95 d) 100-150
Last Answer : c) 60-95
Description : Hollow cone nozzles employed on boom type of sprayers have spray angle between : A .30-60° B.40-60° C.60-95° D.100-150°
Last Answer : C.60-95°
Description : Durability of the fertilizer increases with a) Increase in the kinetic angle of repose b) Decrease in the kinetic angle of repose c) Decrease in the speed of the forward travel d) None of the above
Last Answer : b) Decrease in the kinetic angle of repose
Description : In a disc plough with the increase in the disk angle, the transverse component of reaction will a)Increase b) Decrease c) Unaffected d) None of the above
Last Answer : a)Increase
Description : Width of cut of disc plow is increased by a)Increasing disc angle b)Increasing tilt angle c)addition of more weight d)Decreasing disc angle
Last Answer : a)Increasing disc angle
Description : The depth of penetration of a disc harrow is increased by: a) Tilt angle b) Gang angle c) Disc angle d) All of above
Last Answer : b) Gang angle
Description : Disc angle adjustment influences: a. Depth of cut b. width of cut c. Soil break up d. Direction of travel
Last Answer : b. width of cut
Description : Spray Angle for fan nozzles and hollow cone nozzle a) 40-50 b) 50-60 c) 60-95 d) 100-150
Description : .Large tilt angle best for a) Hard soil b) Sticky and non-scouring soil c) Dry and cemented soil d None of the above
Last Answer : b) Sticky and non-scouring soil
Description : Scouring will occur as long as a) Frictional resistance at soil tool interface is less than the resistance at parallel soil-soil inter face b) Frictional resistance at soil tool interface is more than ... c) Soil-metal friction is more than angle of soil shearing resistance d) None of the above
Last Answer : a) Frictional resistance at soil tool interface is less than the resistance at parallel soil-soil inter face
Description : Connecting rod generally have A)t-shape b)angle shape C)i-shape d)flst-shape
Last Answer : C)i-shape
Description : Do they make toy RC planes that will transmit a video signal back?
Last Answer : Yes the Vortex Extreme 3 Channel RC Airplane With Eyecam Video Camera.
Description : ed planting is practiced for row crops in (a) Semi-arid conditions to place seed deep in moist soil (b) High rainfall areas to improve surface drainage (c) Irrigated areas leaving more space for operation of equipments (d) Both (b) and (c)
Last Answer : d) Both (b) and (c)
Description : Engine power output is a function of A. Crank shaft torque B. Speed C. Both (A) and (B) D. None of the above
Last Answer : Engine power output is a function of A. Crank shaft torque B. Speed C. Both (A) and (B) D. None of the above
Description : power of absorbing type hydraulic dynamometer varies as a) cube of rpm b) fifth power of the diameter c) none of the above d) both (a) and (b)
Last Answer : d) both (a) and (b)
Description : pecific energy requirement of rotary tillers can be reduce by a) Increasing the bite length b) Decreasing depth to diameter ratio c) Both (a) and (b) d) Excessive reduction in total power requirement
Last Answer : c) Both (a) and (b)
Description : For two shafts joined in parallel, the --------------- in each shaft is same. a. shear stress. b. Angle of twist c. torque d. torsional stress.
Last Answer : b. Angle of twist
Description : For two shafts joined in series, the --------------- in each shaft is same. a. shear stress. b. Angle of twist c. torque d. torsional stress.
Last Answer : c. torque
Description : Lister planting or furrow planting is practiced for (a) High rainfall areas to improve surface drainage (b) Semi-arid conditions to place seed deep in moist soil (c) Areas where natural moisture conditions are favourable (d) Irrigated areas leaving more space for operation of equipments
Last Answer : (b) Semi-arid conditions to place seed deep in moist soil
Description : .When the valves are carried in engine bioel at one side of each cylinder is called A. Valves in head arrangements B. L-head C. I-head D. None of the above
Last Answer : B. L-head
Description : The force that holds two particles of the different kind together is called as a) Adhesion c) Shear force b) Cohesion d) Compressive
Last Answer : a) Adhesion
Description : The mechanical cleaning of sugar cane is done due to A. The different in the peripheral velocity of rollers B. Rough surface provided Or the outer surface of rollers C. Blow of air which forces the extraneous material out of the machine D. All of the above
Last Answer : D. All of the above
Description : Differential lock offers advantage of A. Better drawbar pull when drive wheel are under different conditions B. Easier to plant in straight rows C. Reduces stearing effort and side draft when operating with certain implements D. All of the above
Description : The cutter bar of a tractor operated mower ordinarily makes: A. Near the front axis B. 40mm towards the real axis C. At the power take off shaft D. Between the two lower Links
Last Answer : D. Between the two lower Links
Description : The two types of cylinder used on power wheat threshers are: a) Serrated disc and rasp bar b) Spike tooth and wire loop type c) Spike tooth and hammer mill d) Hammer mill and flails
Last Answer : c) Spike tooth and hammer mill
Description : The virtual hitch point of a directional implement is located at: a) Near the front axle b) 40 mm towards the rear axle c) At the power take off shaft d) Between two lower links
Last Answer : d) Between two lower links
Description : Firing order of a six cylinder engine in which no two adjacent cylinder have power stroke is (a) 1 5 3 6 2 4 (b) 1 2 3 4 5 6 (c) 1 5 4 6 3 2 (d) 1 4 2 5 6 3
Last Answer : (a) 1 5 3 6 2 4
Description : Two shafts will have equal strength, if (a) diameter of both the shafts is same (b) angle of twist of both the shafts is same (c) material of both the shafts is same (d) twisting moment of both the shafts is same
Last Answer : d) twisting moment of both the shafts is same
Description : Optimum speed for grains like gram,pea,etc.,thresher using power is a) 300-400rpm b) 400-600rpm c) 600-800rpm d) 1100-1200rpm
Last Answer : a) 300-400rpm
Description : Optimum operating cylinder speed for wheat threshing using power operated thresher is a) 300-400rpm b) 400-600rpm c) 600-800rpm d) 1100-1200rpm
Last Answer : d) 1100-1200rpm
Description : Optimum operating cylinder speed for the power operated maize sheller is a) 200-400rpm b) 400-600rpm c) 600-800rpm d) 1000-1200rpm
Last Answer : c) 600-800rpm
Description : Superchargers are driven by A. Electric current from the battery B. Exhaust gases from engine C. Direct connection with the engine power D. None of the above
Last Answer : C. Direct connection with the engine power