Which of the following material is more elastic? (a) Rubber (b) Glass (c) Steel (d) Wood

Which of the following material is more elastic?
(a) Rubber
(b) Glass
(c) Steel
(d) Wood
by

1 Answer

Answer :

(c) Steel
by

Related questions

Which of the following is the most elastic material? (A) Plastic (B) Glass (C) Steel (D) Rubber

Description : Which of the following is the most elastic material? (A) Plastic (B) Glass (C) Steel (D) Rubber

Last Answer : (C) Steel

A highly elastic material is deformed least on loading and retains its original form on removal of the load. Which of the following is the most elastic material? (A) Steel (B) Glass (C) Rubber (D) Brass

Description : A highly elastic material is deformed least on loading and retains its original form on removal of the load. Which of the following is the most elastic material? (A) Steel (B) Glass (C) Rubber (D) Brass

Last Answer : Option A

The stress at which extension of a material takes place more quickly as compared to increase in load, is called (a) No elastic zone (b) Plastic point (c) Yield point (d) Breaking point

Description : The stress at which extension of a material takes place more quickly as compared to increase in load, is called (a) No elastic zone (b) Plastic point (c) Yield point (d) Breaking point

Last Answer : (c) Yield point

Which of the following is most elastic ? A. Steel (Answer) B. Rubber C. Glass D. Sponge E. None of these

Description : Which of the following is most elastic ? A. Steel (Answer) B. Rubber C. Glass D. Sponge E. None of these

Last Answer : A. Steel (Answer)

The most important property for the spring material is (a) High elastic limit (b) High deflection value (c) Resistance to fatigue and shock (d) All of these

Description : The most important property for the spring material is (a) High elastic limit (b) High deflection value (c) Resistance to fatigue and shock (d) All of these

Last Answer : (d) All of these

The most important property for the spring material is (a) High elastic limit (b) High deflection value (c) Resistance to fatigue and shock (d) All of these

Description : The most important property for the spring material is (a) High elastic limit (b) High deflection value (c) Resistance to fatigue and shock (d) All of these

Last Answer : (d) All of these

In a simple bending theory, one of the assumption is that the material of the beam is isotropic. This assumption means that the a. normal stress remains constant in all directions b. normal stress varies linearly in the material c. elastic constants are same in all the directions d. elastic constants varies linearly in the material

Description : In a simple bending theory, one of the assumption is that the material of the beam is isotropic. This assumption means that the a. normal stress remains constant in all directions b. ... c. elastic constants are same in all the directions d. elastic constants varies linearly in the material

Last Answer : c. elastic constants are same in all the directions

The limit beyond which the material does not behave elastically is known as (a) Proportional limit (b) Elastic limit (c) Plastic limit (d) Yield Point

Description : The limit beyond which the material does not behave elastically is known as (a) Proportional limit (b) Elastic limit (c) Plastic limit (d) Yield Point

Last Answer : (b) Elastic limit

Every material obeys the Hooke’s law within (a) Elastic limit (b) Plastic limit (c) Limit of proportionality (d) None of these

Description : Every material obeys the Hooke’s law within (a) Elastic limit (b) Plastic limit (c) Limit of proportionality (d) None of these

Last Answer : c) Limit of proportionality

A brittle material has (a) No elastic zone (b) No plastic zone (c) Large plastic zone (d) None of these

Description : A brittle material has (a) No elastic zone (b) No plastic zone (c) Large plastic zone (d) None of these

Last Answer : 2

Specify the material of construction suitable for handling concentrated HNO3 at 100°C. (A) High silicon iron, Kel-F and Teflon (B) Tin and wood (C) Silicone rubber (D) Stainless steel

Description : Specify the material of construction suitable for handling concentrated HNO3 at 100°C. (A) High silicon iron, Kel-F and Teflon (B) Tin and wood (C) Silicone rubber (D) Stainless steel

Last Answer : (A) High silicon iron, Kel-F and Teflon

The material used for making torsion bar is (a) Steel (b) Cast iron (c) High carbon steel (d) All of the above

Description : The material used for making torsion bar is (a) Steel (b) Cast iron (c) High carbon steel (d) All of the above

Last Answer : (a) Steel

Which material is suitable for shaft material? a. High speed steel b. Stainless steel or high carbon steel c. Grey cast iron d. Steel having approx. 0.4% carbon and 0.8% manganese

Description : Which material is suitable for shaft material? a. High speed steel b. Stainless steel or high carbon steel c. Grey cast iron d. Steel having approx. 0.4% carbon and 0.8% manganese

Last Answer : d. Steel having approx. 0.4% carbon and 0.8% manganese

Spring is an (a) Elastic device (b) Plastic device (c) Elastic as well as plastic device (d) None

Description : Spring is an (a) Elastic device (b) Plastic device (c) Elastic as well as plastic device (d) None

Last Answer : (a) Elastic device

Spring is an (a) Elastic device (b) Plastic device (c) Elastic as well as plastic device (d) None

Description : Spring is an (a) Elastic device (b) Plastic device (c) Elastic as well as plastic device (d) None

Last Answer : (a) Elastic device

Strength of a shaft a. Is equal to maximum shear stress in the shaft at the time of elastic failure b. Is equal to maximum shear stress in the shaft at the time of rupture c. Is equal to torsional rigidity d. Is ability to resist maximum twisting moment

Description : Strength of a shaft a. Is equal to maximum shear stress in the shaft at the time of elastic failure b. Is equal to maximum shear stress in the shaft at the time of rupture c. Is equal to torsional rigidity d. Is ability to resist maximum twisting moment

Last Answer : d. Is ability to resist maximum twisting moment

The statement : stress is proportional to strain, i.e. the Hooke’s law holds good upto (a) Elastic Limit (b) Proportional Limit (c) Plastic Limit (d) Yield point

Description : The statement : stress is proportional to strain, i.e. the Hooke’s law holds good upto (a) Elastic Limit (b) Proportional Limit (c) Plastic Limit (d) Yield point

Last Answer : (b) Proportional Limit

48. A perfectly elastic body (a) Can move freely (b) Has perfectly smooth surface (c) Is not deformed by any external surface (d) Recovers its original size and shape when the deforming force is removed.

Description : 48. A perfectly elastic body (a) Can move freely (b) Has perfectly smooth surface (c) Is not deformed by any external surface (d) Recovers its original size and shape when the deforming force is removed.

Last Answer : d) Recovers its original size and shape when the deforming force is removed.

Hooke’s law is applicable within (a)Elastic limit (b)Plastic limit (c)Fracture point (d) Ultimate strength

Description : Hooke’s law is applicable within (a)Elastic limit (b)Plastic limit (c)Fracture point (d) Ultimate strength

Last Answer : (a)Elastic limit

Which of the two-glass or rubber is more elastic and why?

Description : Which of the two-glass or rubber is more elastic and why?

Last Answer : Ans: Glass is more elastic than rubber because for a given applied force per unit area, the strain produced in glass is much more than that produced in rubber.

Steel is more elastic than rubber because it :

Description : Steel is more elastic than rubber because it :

Last Answer : requires larger deforming force

Metal Steel is more elastic than rubber because _____. A. Its density is high B. It is a metal C. Ratio of stress to strain is more D. Ratio of stress to strain is less

Description : Metal Steel is more elastic than rubber because _____. A. Its density is high B. It is a metal C. Ratio of stress to strain is more D. Ratio of stress to strain is less

Last Answer : ANSWER: C

Steel is more elastic than rubber because _____. A. Its density is high B. It is a metal C. Ratio of stress to strain is more D. Ratio of stress to strain is less

Description : Steel is more elastic than rubber because _____. A. Its density is high B. It is a metal C. Ratio of stress to strain is more D. Ratio of stress to strain is less

Last Answer : ANSWER: C

Steel is more elastic than rubber because it – (1) requires larger deforming force (2) Is never deformed (3) is deformed very easily (4) is harder than rubber

Description : Steel is more elastic than rubber because it – (1) requires larger deforming force (2) Is never deformed (3) is deformed very easily (4) is harder than rubber

Last Answer : (3) is deformed very easily Explanation: Elasticity is the capability of an object to return to its former shape once a load inducing strain is removed. Young Modulus or elastic modulus [tendency to be ... ., nonpermanently) when a force is applied to it] of steel is more than that of rubber.

Steel is more elastic than rubber because it : (1) requires larger deforming force (2) is never deformed (3) is deformed very easily (4) is harder than rubber

Description : Steel is more elastic than rubber because it : (1) requires larger deforming force (2) is never deformed (3) is deformed very easily (4) is harder than rubber

Last Answer : is deformed very easily

Which of the following is most elastic? (1) Rubber (2) Wet clay (3) Steel (4) Plastic

Description : Which of the following is most elastic? (1) Rubber (2) Wet clay (3) Steel (4) Plastic

Last Answer : (3) Steel Explanation: In physics, elasticity is a physical property of materials which return to their original shape after the stress that caused their deformation is no longer applied. ... are characterized by a linear relationship between stress and strain (the relative amount of deformation).

Which of the following is most elastic? (1) Rubber (2) Wet clay (3) Steel (4) Plastic

Description : Which of the following is most elastic? (1) Rubber (2) Wet clay (3) Steel (4) Plastic

Last Answer : Steel

Pick out the correct statement. (A) Materials exhibiting high elasticity obey Hooke's law (B) The elastic behaviour of rubber under compression is the same as its behaviour under tension (C) The damping capacity of a material is due to its plastic deformation (D) The stress required to cause plastic flow in polycrystalline material is

Description : Pick out the correct statement. (A) Materials exhibiting high elasticity obey Hooke's law (B) The elastic behaviour of rubber under compression is the same as its behaviour under tension (C) ... to its plastic deformation (D) The stress required to cause plastic flow in polycrystalline material is

Last Answer : Option B

Euler’s formula is not valid for mild steel column when slenderness ratio is (a) More than 100 (b) Less than 100 (c) Less than 80 (d)More than 80

Description : Euler’s formula is not valid for mild steel column when slenderness ratio is (a) More than 100 (b) Less than 100 (c) Less than 80 (d)More than 80

Last Answer : (c) Less than 80

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

Why Poisson Ratio Is Higher In, Rubber/steel/wood?

Description : Why Poisson Ratio Is Higher In, Rubber/steel/wood?

Last Answer : When a material is compressed in one direction, it usuallytends to expand in the other two directions perpendicular tothe direction of compression. This phenomenon is called the Poisson effect. Poisson's ratio is a ... For steel = 0.288 For wood < 0.2 Thus Poisson's ratio is higher in RUBBER.

Determine the maximum shearing stress and elongation in a helical steel spring composed of 20 turns of 20-mm-diameter wire on a mean radius of 90 mm when the spring is supporting a load of 1.5 kN. and G = 83 GPa. a. 200 mm b. 105.4 mm c. 150 mm d. 250 mm

Description : Determine the maximum shearing stress and elongation in a helical steel spring composed of 20 turns of 20-mm-diameter wire on a mean radius of 90 mm when the spring is supporting a load of 1.5 kN. and G = 83 GPa. a. 200 mm b. 105.4 mm c. 150 mm d. 250 mm

Last Answer : b. 105.4 mm

A steel column is a medium column when the slenderness ratio is (a) >120 (b) <30 (c) >30 (d) None

Description : A steel column is a medium column when the slenderness ratio is (a) >120 (b) 30 (d) None

Last Answer : (c) >30

A steel column is a long column when the slenderness ratio is (a) >120 (b) <30 (c) >30 (d) None

Description : A steel column is a long column when the slenderness ratio is (a) >120 (b) 30 (d) None

Last Answer : (a) >120

A steel column is a short column when the slenderness ratio is (a) >120 (b) <30 (c) >30 (d) None

Description : A steel column is a short column when the slenderness ratio is (a) >120 (b) 30 (d) None

Last Answer : (b)

The shaft are made of (a) Mild steel (b) alloy steel (c) Cooper alloys (d) Any of these

Description : The shaft are made of (a) Mild steel (b) alloy steel (c) Cooper alloys (d) Any of these

Last Answer : (d) Any of these

The following option is correct a. There is neither advantage nor disadvantage in transmitting power at high speed b. There is advantage in transmitting power at high speeds c. There is disadvantage in transmitting power at high speeds d. There is advantage in transmitting power at high speed provided shafts are made of high speed steel

Description : The following option is correct a. There is neither advantage nor disadvantage in transmitting power at high speed b. There is advantage in transmitting power at high speeds c. There is ... There is advantage in transmitting power at high speed provided shafts are made of high speed steel

Last Answer : b. There is advantage in transmitting power at high speeds

The shafts are made of a. mild steel b. alloy steel c. copper alloys d. cast iron.

Description : The shafts are made of a. mild steel b. alloy steel c. copper alloys d. cast iron.

Last Answer : d. cast iron.

With the increase of carbon content in steel, maximum stress (A) Increases (b) Decreases (C) Remains the same (d) none

Description : With the increase of carbon content in steel, maximum stress (A) Increases (b) Decreases (C) Remains the same (d) none

Last Answer : (A) Increases

When mild steel is subjected to a tensile load, its fracture will conform to (a) Star shape (b) Granular shape (c) Cup and cone shape (d) Fibrous shape

Description : When mild steel is subjected to a tensile load, its fracture will conform to (a) Star shape (b) Granular shape (c) Cup and cone shape (d) Fibrous shape

Last Answer : (c) Cup and cone shape

For the same material, length and given torque, a hollow shaft weighs……………… a solid shaft. (a) Less than (b) More than (c) Equal to (d) None of these

Description : For the same material, length and given torque, a hollow shaft weighs……………… a solid shaft. (a) Less than (b) More than (c) Equal to (d) None of these

Last Answer : (a) Less than

The strength of a hollow shaft is ……… for the same length, material and weight of a solid shaft. (a) More (b) Less (c) Equal (d) None of these

Description : The strength of a hollow shaft is ……… for the same length, material and weight of a solid shaft. (a) More (b) Less (c) Equal (d) None of these

Last Answer : (b) Less

For same length, same material, same length a. Weight of solid shaft is less than weight of hollow shaft b. Weight of solid shaft is more than weight of hollow shaft c. Weight of hollow and solid shafts will be same d. Sometime more sometime less

Description : For same length, same material, same length a. Weight of solid shaft is less than weight of hollow shaft b. Weight of solid shaft is more than weight of hollow shaft c. Weight of hollow and solid shafts will be same d. Sometime more sometime less

Last Answer : b. Weight of solid shaft is more than weight of hollow shaft

The strength of a hollow shaft for the same length, material and weight is ---------- a solid shaft. a. less than. b. more than. c. equal to. d. not equal to.

Description : The strength of a hollow shaft for the same length, material and weight is ---------- a solid shaft. a. less than. b. more than. c. equal to. d. not equal to.

Last Answer : b. more than.

For the same material, length and given torque a hoolow shaft weighs ---------- a solid shaft. a. less than b. more than. c. equal to d. not equal to.

Description : For the same material, length and given torque a hoolow shaft weighs ---------- a solid shaft. a. less than b. more than. c. equal to d. not equal to.

Last Answer : a. less than

A solid shaft of same cross sectional area and of same material as that of a hollow shaft can resist a. Less torque. b. More torque. c. Equal torque. d. Unequal torque.

Description : A solid shaft of same cross sectional area and of same material as that of a hollow shaft can resist a. Less torque. b. More torque. c. Equal torque. d. Unequal torque.

Last Answer : a. Less torque.

Which stress strain curve is more steep (a) For a ductile material (b) For a brittle material (c) For a pure metal (d) None

Description : Which stress strain curve is more steep (a) For a ductile material (b) For a brittle material (c) For a pure metal (d) None

Last Answer : b) For a brittle material

Fermenter used in the production of penicillin by deep fermentation process is a __________ lined steel vessel (A) Rubber (B) Monel (C) Glass (D) Nickel

Description : Fermenter used in the production of penicillin by deep fermentation process is a __________ lined steel vessel (A) Rubber (B) Monel (C) Glass (D) Nickel

Last Answer : (C) Glass

H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin

100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain

Description : 100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain

Last Answer : (C) Aluminium, tin and rubber