Description : Every material obeys the Hooke's law within its (A) Elastic limit (B) Plastic point (C) Limit of proportionality (D) None of these
Last Answer : (C) Limit of proportionality
Description : Hooke’s law is applicable within (a)Elastic limit (b)Plastic limit (c)Fracture point (d) Ultimate strength
Last Answer : (a)Elastic limit
Description : The statement : stress is proportional to strain, i.e. the Hooke’s law holds good upto (a) Elastic Limit (b) Proportional Limit (c) Plastic Limit (d) Yield point
Last Answer : (b) Proportional Limit
Description : At yield point of a test piece, the material (A) Obeys Hooke's law (B) Behaves in an elastic manner (C) Regains its original shape on removal of the load (D) Undergoes plastic deformation
Last Answer : (D) Undergoes plastic deformation
Description : Hooke's law (A) Applies to elastic deformation (B) Applies beyond limit of proportionality in stress-strain curve (C) States that stress is inversely proportional to strain upto elastic limit (D) None of these
Last Answer : (A) Applies to elastic deformation
Description : At yield point' of a copper wire A. the load hasn't exceeded the elastic limit yet; so, Hooke's law applies B. the load has already exceeded the elastic limit and the material has become ... stage has passed and the wire has snapped already D. Like Brass and Bronze, Copper has no yield poin
Last Answer : the load has already exceeded the elastic limit and the material has become plastic
Description : The limit beyond which the material does not behave elastically is known as (a) Proportional limit (b) Elastic limit (c) Plastic limit (d) Yield Point
Last Answer : (b) Elastic limit
Description : All materials obey Hooke's law within elastic limit. When elastic limit is reached, the tensile strain (A) Increases very quickly (B) Decreases very quickly (C) Increases in proportion to stress (D) Decreases in proportion to stress
Last Answer : (A) Increases very quickly
Description : If extension in spring is proportional to load applied, then material obeys A. Newton's law B. gravitational law C. Charles's law D. Hooke's law
Last Answer : Hooke's law
Description : Principle of superposition is applicable when (A) Deflections are linear functions of applied forces (B) Material obeys Hooke's law (C) The action of applied forces will be affected by small deformations of the structure (D) None of the above
Last Answer : (A) Deflections are linear functions of applied forces
Description : Pick out the correct statement. (A) Materials exhibiting high elasticity obey Hooke's law (B) The elastic behaviour of rubber under compression is the same as its behaviour under tension (C) ... to its plastic deformation (D) The stress required to cause plastic flow in polycrystalline material is
Last Answer : Option B
Description : Stresses encountered in the metal forming processes are less than the __________ of the material. (A) Fracture strength (B) Yield strength (C) Elastic limit (D) Limit of proportionality
Last Answer : Option A
Description : Hooke's law states that A. the extension is proportional to the load when the elastic limit is not exceeded B. the extension is inversely proportional to the load when the elastic limit is not ... is independent of the load when the elastic limit is not exceeded D. load is dependent on extension
Last Answer : the extension is proportional to the load when the elastic limit is not exceeded
Description : State Hooke’s Law of elasticity. Define Elastic limit.
Last Answer : Hooke’s Law:- Within elastic limit, stress is directly proportional to strain. Elastic limit: -It is the maximum value of the stress upto which the body shows elasticity.
Description : The most important property for the spring material is (a) High elastic limit (b) High deflection value (c) Resistance to fatigue and shock (d) All of these
Last Answer : (d) All of these
Description : A brittle material has (a) No elastic zone (b) No plastic zone (c) Large plastic zone (d) None of these
Last Answer : 2
Description : The stress at which extension of a material takes place more quickly as compared to increase in load, is called (a) No elastic zone (b) Plastic point (c) Yield point (d) Breaking point
Last Answer : (c) Yield point
Description : The law which states, "Within elastic limits strain produced is proportional to the stress producing it", is known as (A) Bernoulli's law (B) Stress law (C) Hooke's law (D) Poisson's law
Last Answer : (C) Hooke's law
Description : Muller Breslau's principle for obtaining influence lines is applicable to (i) Trusses (ii) Statically determinate beams and frames (iii) Statically indeterminate structures, the material of which is elastic and follows Hooke's law (iv ... B) (i), (ii) and (iv) (C) (i) and (ii) (D) Only (i)
Last Answer : (A) (i), (ii) and (iii)
Description : Spring is an (a) Elastic device (b) Plastic device (c) Elastic as well as plastic device (d) None
Last Answer : (a) Elastic device
Description : The spring operates (A) Within plastic limit (B) Within elastic limit (C) Within elasto-plastic limit (D) Within visco-elastic limit
Last Answer : (B) Within elastic limit
Description : In a simple bending theory, one of the assumption is that the material of the beam is isotropic. This assumption means that the a. normal stress remains constant in all directions b. ... c. elastic constants are same in all the directions d. elastic constants varies linearly in the material
Last Answer : c. elastic constants are same in all the directions
Description : Which of the following material is more elastic? (a) Rubber (b) Glass (c) Steel (d) Wood
Last Answer : (c) Steel
Description : Pick out the wrong statement. (A) An ideal liquid or solid solution is defined as one in which each component obeys Raoult's law (B) If Raoult's law is applied to one component of a binary mixture; ... also (C) Henry's law is rigorously correct in the limit of infinite dilution (D) None of these
Last Answer : (D) None of these
Description : A material no longer behaves elastically beyond (A) Plastic limit (B) Limiting load (C) Elastic limit (D) Breaking load
Last Answer : (C) Elastic limit
Description : The ratio of lateral strain to axial strain of a homogeneous material, is known (A) Yield ratio (B) Hooke's ratio (C) Poisson's ratio (D) Plastic ratio
Last Answer : (C) Poisson's ratio
Description : Strength of a shaft a. Is equal to maximum shear stress in the shaft at the time of elastic failure b. Is equal to maximum shear stress in the shaft at the time of rupture c. Is equal to torsional rigidity d. Is ability to resist maximum twisting moment
Last Answer : d. Is ability to resist maximum twisting moment
Description : 48. A perfectly elastic body (a) Can move freely (b) Has perfectly smooth surface (c) Is not deformed by any external surface (d) Recovers its original size and shape when the deforming force is removed.
Last Answer : d) Recovers its original size and shape when the deforming force is removed.
Description : Consider the following salient points in a stress-strain curve of a mild steel bar: 1. Yield point 2. Braking point 3. Yield plateau 4 . Proportionality limit 5. Ultimate point The correct sequence in which they occur while testing the mild ... , 5 and 2 (c) 4, 1, 3, 5 and 2 (d) 1, 4, 2, 3 and 5
Last Answer : (c) 4, 1, 3, 5 and 2
Description : The property of soil which allows it to be deformed rapidly, without rupture, without elastic rebound and without volume change is known as a) Porosity b) Plasticity* c) Stiffness d) Plastic limit
Last Answer : b) Plasticity*
Description : According to this lesson, what term is the way for commanders to adhere to LoW by weighing risk of collateral damage against military necessity and proportionality within the framework of the military decision-making process?
Last Answer : Collateral Damage Estimation Methodology (CDM)
Description : What will happen if stresses induced due to surge in the spring exceeds the endurance limit stress of the spring. (a) Fatigue Failure (b) Fracture (c) None of the listed (d) Nipping
Last Answer : (a) Fatigue Failure
Description : At fully plastic twisting moment (a) only fibres at surface are stressed to yield point in shear (b) fibres at centre are stressed to yield point in shear (c) all fibres are stressed to yield point in shear (d) none of these
Last Answer : (c) all fibres are stressed to yield point in shear
Description : Proportional to the distortion of the stress within the elastic limit. Whose formula is this?
Last Answer : Proportion of stress distortion within the elastic limit. This is Robert Hooke's formula.
Description : cylindrical rod subjected to a tensile strain within the elastic limit undergoes a volume change. If the volume strain is equal to half the tensile strain, then the Poisson's ratio of the rod is (A) 0 (B) 0.33 (C) 0.44 (D) 0.25
Last Answer : Option C
Description : The type of spring used to achieve greater load carrying capacity within given space is (a)spiral spring (b) springs in series (c)multi-leaf spring (d) concentric spring
Last Answer : (d) concentric spring
Description : A spring with 25 active coils cannot be accommodated within a given space. Hence 5 coils of the spring are cut. The stiffness of the new spring will be a. the same b. 1.25 times the original spring c. 0.8 times the original spring d. 20 times the original spring
Last Answer : b. 1.25 times the original spring
Description : The range within which a load can be applied on a rectangular column, to avoid any tensile stress,is (a) One-half of the base (b) One-fifth of the base (c) One-fourth of the base (d) One-fifth of the base
Last Answer : (b) One-fifth of the base
Description : In Fourier's law, the proportionality constant is called the (A) Heat transfer co-efficient (B) Thermal diffusivity (C) Thermal conductivity (D) Stefan-Boltzmann constant
Last Answer : (C) Thermal conductivity
Description : Which among the following is not a principle of International Humanitarian Law ? (a) Principle of Distinction between – civilians and combatants (b) Principle of Distinction between – citizens and aliens (c) Principle of Proportionality (d) Principle of Humane Treatment
Last Answer : (b) Principle of Distinction between – citizens and aliens
Description : When the liquid phase and vapour phase of a binary system obeys Raoult's and Dalton's law respectively, the relative volatility is the ratio of (A) Vapour pressure of component A to that of ... to the partial pressure of A (D) Partial pressure of component A to the total pressure
Last Answer : (A) Vapour pressure of component A to that of component B
Description : Relative volatility varies with the concentration of component for an ideal solution. The relative volatility of a binary mixture may be defined as the ratio of vapor pressure of component 'A' to that of ... law (D) Vapor phase obeys Dalton's law and liquid phase obeys Raoult's law
Last Answer : (D) Vapor phase obeys Dalton's law and liquid phase obeys Raoult's law
Description : Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent ... of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid
Last Answer : (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity
Description : Pick out the correct statement. (A) Human blood is a Newtonian fluid (B) A Newtonian fluid obeys Newton's law of cooling (C) For a non-Newtonian fluid, a straight line passes through the origin in a plot between shear stress and shear gradien
Last Answer : (B) A Newtonian fluid obeys Newton's law of cooling
Description : An ideal fluid is (A) Frictionless & incompressible (B) One, which obeys Newton's law of viscosity (C) Highly viscous (D) None of these
Last Answer : (A) Frictionless & incompressible
Description : Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of ... is negligible compared with that in the vapour state (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : A fluid which obeys the Newton's law of viscosity is termed as (A) Real fluid (B) Ideal fluid (C) Newtonian fluid (D) Non-Newtonian fluid
Last Answer : Answer: Option C
Description : An ideal transformer always obeys the law of conservation of........: a. energy b. momentum c. charge d. Flux
Last Answer : b. momentum