Description : Maximum deflection in a cantilever beam with W at the free end will be a.WL3/6EI. b.WL3/2EI c.WL3/3EI d.None.
Last Answer : c.WL3/3EI
Description : A beam 3m long simply supported at its ends ,is carrying a point load W at the centre.If the slope at the ends of the beam should not exceed 10,find the deflection at the centre of beam? a.18.41 mm b.13.45 mm c.17.45 mm d.21.67 mm.
Last Answer : c.17.45 mm
Description : Maximum deflection in a S.S beam with UDL w over the entire span will be a. at the left hand support. b.at the right support. c. at the centre. d.none.
Last Answer : c. at the centre.
Description : Maximum deflection in a S.S. beam with W at centre will be a.at the left hand support. b.at the right support. c.at the centre d. None.
Last Answer : c.at the centre
Description : Maximum slope in a cantilever beam with UDL w over the entire length will be a. wl3/9EI b. wl3/6EI c. wl3/3EI d. None.
Last Answer : b. wl3/6EI
Description : The shear force at the centre of a simply supported beam of span l carrying a uniformly distributed load of w per unit length over the whole span is (a) wl (b) wl/2 (c) wl/4 (d) Zero
Last Answer : (d) Zero
Description : For a simply supported beam of span L, with point load W at the centre, the maximum B.M. will be (a) WL (b) WL/2 (c) WL/4 (d) WL/8
Last Answer : (c) WL/4
Description : Maximum deflection of a (A) Cantilever beam carrying a concentrated load W at its free end is WL3 /3EI (B) Simply supported beam carrying a concentrated load W at mid-span is WL3 /48EI (C) Cantilever beam, carrying a uniformly distributed load over span is WL3 /8EI (D) All the above
Last Answer : (D) All the above
Description : For a fixed beam with midpoint load point, maximum deflection at the centre is a.PL3/ 192EI b.PL2/ 48EI c.PL4/ 192EI d.PL3/ 48EI
Last Answer : a.PL3/ 192EI
Description : A simply supported beam carries a uniformly distributed load over the whole span.The deflection at the centre is y.If the distributed load per unit length is doubled and also depth of beam is doubled ,then the deflection at the centre would be a.2y b.4y c.y/2 d.y/4.
Last Answer : d.y/4.
Description : A simply supported beam is of rectangular section.It carries a uniformly distributed load over the whole span.The deflection at the centre is y.If the depth of beam is doubled ,the deflection at the centre would be a.2y b.4y c.y/2 d.y/8.
Last Answer : d.y/8.
Description : For a fixed beam with midpoint load point deflection for x
Last Answer : c. (Px2/48EI)(3L-4x)
Description : Maximum deflection in a cantilever beam with UDL w over the entire length will be a. At the free end. b. At the fixed end. c. At the centre d. None.
Last Answer : a. At the free end.
Description : Maximum deflection in a cantilever beam with W at the free end will be a. at the free end. b.at the fixed end. c.at the centre d.None.
Last Answer : a. at the free end.
Description : The maximum deflection due to a load W at the free end of a cantilever of length L and having flexural rigidity EI, is (A) WL²/2EI (B) WL²/3EI (C) WL3 /2EI (D) WL3 /3EI
Last Answer : (D) WL3 /3EI
Description : The maximum deflection due to a uniformly distributed load w/unit length over entire span of a cantilever of length l and of flexural rigidly EI, is (A) wl3 /3EI (B) wl4 /3EI (C) wl4 /8EI (D) wl4 /12E
Last Answer : (C) wl4 /8EI
Description : Deflection of an off centre loaded fixed beam is a.Wa3 b3/ 3L3EI b.Wa3b3/ 8L3EI c.Wa3b3/ 192L3EI d.Wa3b3/ 384L3EI
Last Answer : a.Wa3 b3/ 3L3EI
Description : Maximum deflection in a S.S beam with UDL w over the entire span will be a. 3wl4 /584EI. b. 5wl4/384EI. C. 7wl4/384EI. d. None.
Last Answer : b. 5wl4/384EI.
Description : In a simply supported beam subjected to uniformly distributed load (w) over the entire length (l), total load=W, maximum Bending moment is (a) Wl/8 or wl2/8 at the mid-point (b) Wl/8 or wl2/8 at the end (c) Wl/4 or wl2/4 (d) Wl/2
Last Answer : (a) Wl/8 or wl2/8 at the mid-point
Description : A beam of uniform rectangular section 200 mm wide and 300mm deep is simply supported at its ends.It carries a uniformly distributed load of 9KN/m run over the entire span of 5m.If E=1×104 N/mm2, what is the maximum deflection? a.14.26 mm b.17.28 mm c.18.53 mm d.16.27 mm.
Last Answer : d.16.27 mm.
Description : Deflection of a simply supported beam when subjected to central point load is given as ________ a. (Wl /16 EI) b. (Wl2/16 EI) c. (Wl3/48 EI) d. (5Wl4/ 384EI)
Last Answer : c. (Wl3/48 EI)
Description : A simply supported beam carries uniformly distributed load of 20 kN/m over the length of 5 m. If flexural rigidity is 30000 kN.m2, what is the maximum deflection in the beam? a. 5.4 mm b. 1.08 mm c. 6.2 mm d. 8.6 mm
Last Answer : a. 5.4 mm
Description : Maximum bending moment in a S.S. beam having a concentrated load at the centre will be (a) WL (b) WL/2 (c) WL/4 (d) None
Description : Maximum deflection in a cantilever beam with UDL w over the entire length will be a.wL4/4EI b.wL4/12EI C.wl4/ 8EI d.None.
Last Answer : C.wl4/ 8EI
Description : Maximum slope in a S.S. beam with W at centre will be a.Wl2/ 16EI. b.Wl2/32EI. c.Wl2/48EI. d.None.
Last Answer : a.Wl2/ 16EI.
Description : Maximum slope in a S.S. beam with W at centre will be a.at the supports. b.at the centre c. In between the support and centre. d.None.
Last Answer : a.at the supports.
Description : In a off centre point loaded fixed beam total moment is a. Wab / L b.Wab / 2L c. Wab / 3L
Last Answer : a. Wab / L
Description : The maximum deflection of a simply supported beam of span L, carrying an isolated load at the centre of the span; flexural rigidity being EI, is (A) WL3 /3EL (B) WL3 /8EL (C) WL3 /24EL (D) WL3 /48EL
Last Answer : (D) WL3 /48EL
Description : When a simply supported beam is loaded with a point load at the centre, the maximum tensile stress is developed on the (a) Top fibre (b) Bottom fibre (c) Neutral axis (d) None of these
Last Answer : (b) Bottom fibre
Description : For a fixed beam with midpoint load point moment for x
Last Answer : b. P/8(4x-L)
Description : .For a fixed beam with midpoint load point of contraflexure occurs at a. L/4 b. L/2 c. L/6 d. L/8
Last Answer : a. L/4
Description : A concentrated load P acts on a simply supported beam of span L at a distance L/3 from the left support. The bending moment at the point of application of the load is given by (a) PL/3 (b) 2PL/3 (c) PL/9 (d) 2PL/9
Last Answer : (d) 2PL/9
Description : Maximum slope in a cantilever beam with UDL w over the entire length will be a. At the free end. b. At the fixed end. c. At the centre d. None.
Description : Maximum slope in a cantilever beam with W at the free end will be a.at the free end. b. at the centre c.at the fixed end. d.None.
Last Answer : a.at the free end.
Description : Differences in deflections between two points A and B by the moment area method is given by a.(Area of BMD diagram between A and B ).XB/2EI. b.(Area of BMD diagram between A and B).XB/3EI c.(Area of BMD diagram between A and B) .XB/EI d.None.
Last Answer : c.(Area of BMD diagram between A and B) .XB/EI
Description : .Differences in slopes between two points A and B by the moment area method is given by a.Area of BMD diagram between A and B /2EI. b.Area of BMD diagram between A and B /3EI. C.Area of BMD diagram between A and B /EI d.None.
Last Answer : C.Area of BMD diagram between A and B /EI
Description : For a simply supported beam of span L, loaded with U.D.L. w/m over the whole span, the maximum B.M will be (a) wL/4 (b) wL2 /8 (c) wL2 /4 (d) WwL2 /2
Last Answer : (b) wL2
Description : In continuous beam, the intermediate beams are subjected to a. some bending moment b. no bending moment c. no slope d.no deflection
Last Answer : a. some bending moment
Description : In continuous beam between intermediate supports the deflection is a. convex down b. convex up c. concave up d. concave down
Last Answer : b. convex up
Description : For the same span and loads fixed beam in comparison with simply supported beams has a. lesser value of maximum deflection b. more value of maximum deflecction c.twice the value of maximum deflecction d.same value of maximum deflecction
Last Answer : a. lesser value of maximum deflection
Description : For a fixed beam with UDL, maximum deflection is a.wL4/48EI b.wL4/192EI c. wL4/384EI d.wL3/192EI
Last Answer : c. wL4/384EI
Description : A beam is designed on the basis of a. Maximum deflection. b.Minimum deflection c.Maximum slope d.None.
Last Answer : a. Maximum deflection.
Description : The vertical distance between the axis of the beam before and after loading at a point is called as _______ a. Deformation b. Deflection c. Slope d. None of above.
Last Answer : b. Deflection
Description : The design of a beam is based on strength criteria, if the beam is sufficiently strong to resist ----------------. a.Shear force b.deflection c. both a and b. d. none of the above.
Last Answer : a.Shear force
Description : Which of the following statements is/are true for a simply supported beam? a. Deflection at supports in a simply supported beam is maximum. b.Deflection is maximum at a point where slope is zero . c. Slope is minimum at supports in a simply supported beam. d. All of the above
Last Answer : b.Deflection is maximum at a point where slope is zero .
Description : In cantilever beam the slope and deflection at the free end is ---------. a.zero b.maximum c.minimum d.none of above.
Last Answer : b.maximum
Description : δ = (W a 2 b 2 ) / (3 EIL) is the value of deflection for ______ A. simply supported beam which has central point load B. simply supported beam which has eccentric point load C. simply supported beam which has U.D.L. point load per unit length D. fixed beam which has central point load
Last Answer : B. simply supported beam which has eccentric point load
Description : δ = (W a 2 b 2 ) / (3 EIl) is the value of deflection for ______ a. simply supported beam which has central point load b. simply supported beam which has eccentric point load c. simply supported beam which has U.D.L. point load per unit length d. fixed beam which has central point load
Last Answer : b. simply supported beam which has eccentric point load
Description : The maximum deflection of a simply supported beam of length L with a central load W, is (A) WL²/48EI (B) W²L/24EI (C) WL3 /48EI (D) WL²/8EI
Last Answer : (C) WL3 /48EI
Description : The stiffness factor for a prismatic beam of length L and moment of inertia I, is (A) IE/L (B) 2EI/L (C) 3EI/L (D) 4EI/L
Last Answer : (A) IE/L