Station A uses 32 byte packets to transmit messages to Station B using a sliding window protocol. The round trip delay between A and B is 80 milliseconds and the bottleneck bandwidth on the path between A and B is 128 kbps. What is the optimal window size that A should use? a. 20 b. 40 c. 160 d. 320

Station A uses 32 byte packets to transmit
messages to Station B using a sliding
window protocol. The round trip delay
between A and B is 80 milliseconds and the
bottleneck bandwidth on the path between A
and B is 128 kbps. What is the optimal
window size that A should use?
a. 20
b. 40
c. 160
d. 320
by

1 Answer

Answer :

b. 40
by

Related questions

Station A uses 32 byte packets to transmit messages to station B using sliding window protocol. The round trip delay between A and B is 40 milli seconds and the bottleneck bandwidth on the path between A and B is 64 kbps. The optimal window size of A is (1) 20 (2) 10 (3) 30 (4) 40

Description : Station A uses 32 byte packets to transmit messages to station B using sliding window protocol. The round trip delay between A and B is 40 milli seconds and the bottleneck bandwidth on the path between A and B is 64 kbps. The optimal window size of A is (1) 20 (2) 10 (3) 30 (4) 40

Last Answer : (2) 10

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channelcapacity. Assuming that processing delay is negligible, the minimum number of bits for the sequence number field in a frame for maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Description : The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channel capacity. Assuming that processing ... maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Last Answer : c. C

Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it is assumed that each sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Description : Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it ... sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Last Answer : (C) 128 kbps

Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec

Description : Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec

Last Answer : a. 2 sec

The maximum size of the window in a Sliding Window Protocol is _______ A. 2m – 1 B. 2m + 1 C. 2m D. 2m-1

Description : The maximum size of the window in a Sliding Window Protocol is _______ A. 2m – 1 B. 2m + 1 C. 2m D. 2m-1

Last Answer : A. 2m – 1

A pure ALOHA Network transmit 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is .............. (A) 0.384 (B) 0.184 (C) 0.286 (D) 0.586

Description : A pure ALOHA Network transmit 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is .............. (A) 0.384 (B) 0.184 (C) 0.286 (D) 0.586

Last Answer : (B) 0.184

In a packet switching network, if the message size is 48 bytes and each packet contains a header of 3 bytes. If 24 packets are required to transmit the message, the packet size is ................ (1) 2 bytes (2) 1 byte (3) 4 bytes (4) 5 bytes

Description : In a packet switching network, if the message size is 48 bytes and each packet contains a header of 3 bytes. If 24 packets are required to transmit the message, the packet size is ................ (1) 2 bytes (2) 1 byte (3) 4 bytes (4) 5 bytes

Last Answer : (4) 5 bytes 

------------------- is a set of rules governing the format and meaning of the packets, or messages that are exchanged by the peer entities within a layer. a. Interface b. Reference model c. Protocol d. None of these

Description : ------------------- is a set of rules governing the format and meaning of the packets, or messages that are exchanged by the peer entities within a layer. a. Interface b. Reference model c. Protocol d. None of these

Last Answer : c. Protocol

Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Description : Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Last Answer : c. 464

What bandwidth is needed to support a capacity of 128 kbps when the signal power to noise power ratio in decibels is 100? A. 19224 Hz B. 3853 Hz C. 19244 Hz D. 3583 Hz

Description : What bandwidth is needed to support a capacity of 128 kbps when the signal power to noise power ratio in decibels is 100? A. 19224 Hz B. 3853 Hz C. 19244 Hz D. 3583 Hz

Last Answer : B. 3853 Hz

What is the minimum bandwidth required for broadband connection: a) 128 kbps b) 256 kbps c) 512 kbps d) None of These

Description : What is the minimum bandwidth required for broadband connection: a) 128 kbps b) 256 kbps c) 512 kbps d) None of These

Last Answer : b) 256 kbps

Following an experiment, Jamie estimates that his probability of making a three-pointer with a basketball is 0.8. If he shoots 160 attempts from the three-point line, how many times can he expect to make a three-point basket A. 32 B. 80 C. 128 D. 160?

Description : Following an experiment, Jamie estimates that his probability of making a three-pointer with a basketball is 0.8. If he shoots 160 attempts from the three-point line, how many times can he expect to make a three-point basket A. 32 B. 80 C. 128 D. 160?

Last Answer : 128

The world population growth rate at a certain reference year was 3.5%. Assuming exponential growth of population, after how many years, the population of the world would have increased by a factor 16 ? (A) ~ 80 years (B) ~ 40 years (C) ~ 160 years (D) ~ 320 years

Description : The world population growth rate at a certain reference year was 3.5%. Assuming exponential growth of population, after how many years, the population of the world would have increased by a factor 16 ? (A) ~ 80 years (B) ~ 40 years (C) ~ 160 years (D) ~ 320 years

Last Answer : Answer: A

A pure ALOHA Network transmits 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is ______. a. 0.384 b. 0.184 c. 0.286 d. 0.58

Description : A pure ALOHA Network transmits 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is ______. a. 0.384 b. 0.184 c. 0.286 d. 0.58

Last Answer : b. 0.184

______ eliminates the varying delay times associated withdifferent-size packets. A) X.25 B) Frame Relay C) ATM D) all of theabove

Description : ______ eliminates the varying delay times associated withdifferent-size packets. A) X.25 B) Frame Relay C) ATM D) all of theabove

Last Answer : ATM

The minimum frame length for 10-Mbps Ethernet is _______bytes. A) 32 B) 80 C) 128 D) none of the above

Description : The minimum frame length for 10-Mbps Ethernet is _______bytes. A) 32 B) 80 C) 128 D) none of the above

Last Answer : none of the above

The program used to determine the round trip delay between a workstation and a destination address is a. Tracert b. Traceroute c. Ping d. Pop

Description : The program used to determine the round trip delay between a workstation and a destination address is a. Tracert b. Traceroute c. Ping d. Pop

Last Answer : b. Traceroute

Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Description : Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Last Answer : 48-b

Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Description : Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Last Answer : d. 256

A radio station is broadcasting at 3750 khz (kilohertz). This station would be found in which radio band? w) 20 meter x) 40 meter y) 80 meter z) 160 meter

Description : A radio station is broadcasting at 3750 khz (kilohertz). This station would be found in which radio band? w) 20 meter x) 40 meter y) 80 meter z) 160 meter 

Last Answer : ANSWER: Y -- 80 METER 

There are 10 users plugged into a hub running 10Mbps half-duplex.and a serverconnected to the switch running 10Mbps half- duplex as well. Find the bandwidth does each host have to the server? a. 100 kbps b. 1 Mbps c. 2 Mbps d. 10 Mbps

Description : There are 10 users plugged into a hub running 10Mbps half-duplex.and a server connected to the switch running 10Mbps half- duplex as well. Find the bandwidth does each host have to the server? a. 100 kbps b. 1 Mbps c. 2 Mbps d. 10 Mbps

Last Answer : d. 10 Mbps

Which of the following condition is usedto transmit two packets overa medium at the same time? A. Contention B. Collision C. Synchronous D. Asynchronous E. None of the above

Description : Which of the following condition is usedto transmit two packets overa medium at the same time? A. Contention B. Collision C. Synchronous D. Asynchronous E. None of the above

Last Answer : Collision

Four bits are used for packed sequence numbering in a sliding window protocol used in a computer network. What is the maximum window size ? (A) 4 (B) 8 (C) 15 (D) 16

Description : Four bits are used for packed sequence numbering in a sliding window protocol used in a computer network. What is the maximum window size ?  (A) 4 (B) 8 (C) 15 (D) 16

Last Answer : (C) 15 

The subnet gets increasingly loaded with packets causing increase in delay in the delivery of packets, which can lead to more retransmission, and ultimately increasing more and more traffic. This is a concept called as _________ A. blockage B. Traffic jam. C. Congestion D. both a and b

Description : The subnet gets increasingly loaded with packets causing increase in delay in the delivery of packets, which can lead to more retransmission, and ultimately increasing more and more traffic. This is a concept called as _________ A. blockage B. Traffic jam. C. Congestion D. both a and b

Last Answer : C. Congestion

What is the size of an IP address? A. 64 bit B. 128 bit C. 16 bit D. 32 bit

Description : What is the size of an IP address? A. 64 bit B. 128 bit C. 16 bit D. 32 bit

Last Answer : D. 32 bit

How much area could be covered for giving one irrigation of 3" depth by a pumpset of one cusec output in the operation of 600 hours, if the water conveyance efficiency is 80 per cent ? (A) 180 acres (B) 320 acres (C) 240 acres (D) 160 acres (E) None of these

Description : How much area could be covered for giving one irrigation of 3" depth by a pumpset of one cusec output in the operation of 600 hours, if the water conveyance efficiency is 80 per cent ? (A) 180 acres (B) 320 acres (C) 240 acres (D) 160 acres (E) None of these

Last Answer : (C) 240 acres

A man on tour travels first 160 km at 64 km/hr and the next 160 km at 80 km/hr. The average speed for the first 320 km of the tour is: a) 35.55 km/hr b) 36 km/hr c) 71.11 km/hr d) 71 km/hr e) 69.69km/hr

Description : A man on tour travels first 160 km at 64 km/hr and the next 160 km at 80 km/hr. The average speed for the first 320 km of the tour is: a) 35.55 km/hr b) 36 km/hr c) 71.11 km/hr d) 71 km/hr e) 69.69km/hr

Last Answer : Total time taken = (160/64) + (160/80) = 9/2 hrs. Avg Speed – 320 × (2/9) km/hr = 71.11km/hr Answer: c)

An ICMP message has _____ headerand a variable-size data section. A) a 16-byte B) a 32-byte C) an 8-byteD) noneof the above

Description : An ICMP message has _____ headerand a variable-size data section. A) a 16-byte B) a 32-byte C) an 8-byte D) noneof the above

Last Answer : an 8-byte

If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS

Description : If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS

Last Answer : c. 32 Kbps

the maximum window size for data transmission using the selective reject protocol with n-bit frame sequence numbers is: a. 2^n b. 2^(n-1) c. 2^n – 1 d. 2^(n-2)

Description : the maximum window size for data transmission using the selective reject protocol with n-bit frame sequence numbers is: a. 2^n b. 2^(n-1) c. 2^n – 1 d. 2^(n-2)

Last Answer : b. 2^(n-1)

In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose of the jamming signal is to pad the frames that are smaller than the minimum frame size. c. A station continues to transmit the packet even after the collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Description : In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose ... collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Last Answer : The exponential backoff mechanism reduces the probability of collision on retransmissions

What is the propagation delay when a signal is transmitter by an earth station to a geosynchronous satellite about 38,500 km above earth’s equator and then received by the same earth station? A. 256 msec B. 128 msec C. 300 msec D. 400 msec

Description : What is the propagation delay when a signal is transmitter by an earth station to a geosynchronous satellite about 38,500 km above earth’s equator and then received by the same earth station? A. 256 msec B. 128 msec C. 300 msec D. 400 msec

Last Answer : A. 256 msec

The Multicast Open Shortest Path First (MOSPF)protocol is an extension of the OSPF protocol that uses multicast routing to create source-based trees. The protocol is basedon _______ routing. A) distancevector B) link state C) path vector D) none of the above

Description : The Multicast Open Shortest Path First (MOSPF)protocol is an extension of the OSPF protocol that uses multicast routing to create source-based trees. The protocol is basedon _______ routing. A) distancevector B) link state C) path vector D) none of the above

Last Answer : link state

The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Description : The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Last Answer : they contain clock recovery circuits

What is the term used todescribethe amount of space you have to transmit to and from the Internet? A) Internet speed B) Network speed C) Router D) Bandwidth

Description : What is the term used todescribethe amount of space you have to transmit to and from the Internet? A) Internet speed B) Network speed C) Router D) Bandwidth

Last Answer : Bandwidth

The _________ product defines the number ofbits that can fill the link. A) bandwidth-period B) frequency-amplitude C) bandwidth-delay D) delay-amplitude

Description : The _________ product defines the number ofbits that can fill the link. A) bandwidth-period B) frequency-amplitude C) bandwidth-delay D) delay-amplitude

Last Answer : bandwidth-delay

Which one of the following statements is FALSE? a. Packet switching leads to better utilization of bandwidth resources than circuit switching. b. Packet switching results in less variation in delay than circuit switching. c. Packet switching requires more per packet processing than circuit switching d. Packet switching can lead to reordering unlike in circuit switching

Description : Which one of the following statements is FALSE? a. Packet switching leads to better utilization of bandwidth resources than circuit switching. b. Packet switching results in less variation ... than circuit switching d. Packet switching can lead to reordering unlike in circuit switching

Last Answer : Packet switching results in less variation in delay than circuit switching.

In computer networks _________ is a characteristic that a flow needs where Lack of it means losing a packet or acknowledgment, which entails retransmission. A. Reliability B. Delay C. Jitter D. Bandwidth

Description : In computer networks _________ is a characteristic that a flow needs where Lack of it means losing a packet or acknowledgment, which entails retransmission. A. Reliability B. Delay C. Jitter D. Bandwidth

Last Answer : A. Reliability

For which one of the following reasons does Internet Protocol (IP) use the time-to- live (TTL) field in the IP datagram header? a. Ensure packets reach destination within that time b. Discard packets that reach later than that time c. Prevent packets from looping indefinitely d. Limit the time for which a packet gets queued in intermediate routers.

Description : For which one of the following reasons does Internet Protocol (IP) use the time-to- live (TTL) field in the IP datagram header? a. Ensure packets reach destination within that time b. ... packets from looping indefinitely d. Limit the time for which a packet gets queued in intermediate routers.

Last Answer : c. Prevent packets from looping indefinitely

The size of small stable RNA ranges from (A) 0–40 nucleotides (B) 40–80 nucleotides (C) 90–300 nucleotides (D) More than 320 nucleotides

Description : The size of small stable RNA ranges from (A) 0–40 nucleotides (B) 40–80 nucleotides (C) 90–300 nucleotides (D) More than 320 nucleotides

Last Answer : Answer : C

User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly

Description : User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly

Last Answer : a. all UDP packets are treated independently by transport layer

User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly Answer: Option(a) 4. Transmission control protocol ____

Description : User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received ... order d. it sends data very quickly Answer: Option(a) 4. Transmission control protocol ____

Last Answer : a. all UDP packets are treated independently by transport layer

Which of the following assertions is FALSE about the Internet Protocol (IP)? a. It is possible for a computer to have multiple IP addresses b. IP packets from the same source to the same destination can take different routes in the network c. IP ensures that a packet is discarded if it is unable to reach its destination within a given number of hops d. The packet source cannot set the route of an outgoing packets; the route is determined only by the routing tables in the routers on the way

Description : Which of the following assertions is FALSE about the Internet Protocol (IP)? a. It is possible for a computer to have multiple IP addresses b. IP packets from the same source to the same ... outgoing packets; the route is determined only by the routing tables in the routers on the way

Last Answer : d. The packet source cannot set the route of an outgoing packets; the route is determined only by the routing tables in the routers on the way

Network layer protocol exits in _________ a. Host b. Switches c. Packets d. Bridges

Description : Network layer protocol exits in _________ a. Host b. Switches c. Packets d. Bridges

Last Answer : a. Host

Consider a link with packet loss probability of 0.2. What is the expected number of transmissions it would take to transfer 200 packets given that the stop and wait protocol is used? a. 125 b. 250 c. 225

Description : Consider a link with packet loss probability of 0.2. What is the expected number of transmissions it would take to transfer 200 packets given that the stop and wait protocol is used? a. 125 b. 250 c. 225

Last Answer : b. 250

State weather the following statement is true or false for IPV6 Addressing 1). IPV6 is a routable protocol that addresses, routes, fragments, and reassembles packets 2).IPV6 is a connectionless, unreliable datagram protocol. 3). An IPV6 packet consists of an IPV6 header and an IPV6 payload. A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Description : State weather the following statement is true or false for IPV6 Addressing 1). IPV6 is a routable protocol that addresses, routes, fragments, and reassembles packets 2).IPV6 is a connectionless, unreliable datagram protocol. 3). ... C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Last Answer : A. 1. True, 2. true, 3. true

User datagram protocol is called connectionless because _____________ A. all UDP packets are treated independently by transport layer B. it sends data as a stream of related packets C. it is received in the same order as sent order D. it sends data very quickly

Description : User datagram protocol is called connectionless because _____________ A. all UDP packets are treated independently by transport layer B. it sends data as a stream of related packets C. it is received in the same order as sent order D. it sends data very quickly

Last Answer : A. all UDP packets are treated independently by transport layer