The current in the circuit shown in figure - What will be the current in the circuit? a. 1/45A b. 1/10A c. 1/5A d. 5A

The current in the circuit shown in figure - What will be the current in the circuit?
a. 1/45A b. 1/10A
c. 1/5A d. 5A
by

1 Answer

Answer :

b. 1/10A
by

Related questions

Resistance between points A and B in the circuit shown in figure is a. 4 ohm b. 6ohm c. 10 ohm d. 8 ohm

Description : Resistance between points A and B in the circuit shown in figure is a. 4 ohm b. 6ohm c. 10 ohm d. 8 ohm

Last Answer : c. 10 ohm

Six resistance are connected as shown in figure. If total current flowing is `0.5A`, then the potrential difference `V_(A)-V_(B)` is

Description : Six resistance are connected as shown in figure. If total current flowing is `0.5A`, then the potrential difference `V_(A)-V_(B)` is

Last Answer : Six resistance are connected as shown in figure. If total current flowing is `0.5A`, then the potrential difference `V_(A) ... V B. 6 V C. 2 V D. 4 V

In the circuit shown the cell is ideal. The codil has an inductance of 2H and will blow when the current through it reaches 5a. The switch is closed a

Description : In the circuit shown the cell is ideal. The codil has an inductance of 2H and will blow when the current through it reaches 5a. The switch is closed a

Last Answer : In the circuit shown the cell is ideal. The codil has an inductance of 2H and will blow when the ... Find the time (in second)n when fuse will blow.

If a battery sends a current of 10A through a circuit for one hour how many coulombs will flow through the circuit?

Description : If a battery sends a current of 10A through a circuit for one hour how many coulombs will flow through the circuit?

Last Answer : 36,000 coulombs

Forward current through a semi-conductor diode circuit is due to ________ (a) Minority carriers (b) majority carriers (c) holes (d) electrons

Description : Forward current through a semi-conductor diode circuit is due to ________ (a) Minority carriers (b) majority carriers (c) holes (d) electrons

Last Answer : (b) majority carriers

Why should a resistance be introduced in a circuit in series deliberately? a. to increase current b. to decrease current c. to control current d. just to give a good look to circuit

Description : Why should a resistance be introduced in a circuit in series deliberately? a. to increase current b. to decrease current c. to control current d. just to give a good look to circuit

Last Answer : b. to decrease current

DC12V 0.45A mini blower?

Description : DC12V 0.45A mini blower?

Last Answer : answer:Use could use either one. For the 6800 MA converts to 6.8 Amps. The fan only requires 0.45 Amps, more is okay less may burnout or short the power source. Welcome to ask-public !

The diameter of Z-DNA is: (a) 34 A (b) 20A (c) 18A (d) 45A

Description : The diameter of Z-DNA is: (a) 34 A (b) 20A (c) 18A (d) 45A

Last Answer : Ans. ((c))

In the following figure, the terminal potential is a. zero b. 2V c. 12V d. 36V

Description : In the following figure, the terminal potential is a. zero b. 2V c. 12V d. 36V

Last Answer : a. zero

As the switch `S` is closed in the circuit shown in figure, current passed through it is.

Description : As the switch `S` is closed in the circuit shown in figure, current passed through it is.

Last Answer : As the switch `S` is closed in the circuit shown in figure, current passed through it is. A. `4.5A` B. `6.0A` C. `3.0A` D. zero

In the circuit shown in figure, the resistance R has a value that depends on the current. Specifically R is 20 `Omega` when `i` is zero and the amount

Description : In the circuit shown in figure, the resistance R has a value that depends on the current. Specifically R is 20 `Omega` when `i` is zero and the amount

Last Answer : In the circuit shown in figure, the resistance R has a value that depends on the current. Specifically R is 20 `Omega` ... A B. `10A` C. 20 A D. `5A`

In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt(3))/(2) mF`. Current in `L - R_(1)` circuit is

Description : In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt(3))/(2) mF`. Current in `L - R_(1)` circuit is

Last Answer : In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt(3)) ... ` B. `90^(@)` C. `180^(@)` D. `60^(@)`

In the circuit shown in figure switch S is closed at time t=0 Takin left to right current through the indcutor as apositive current, current through i

Description : In the circuit shown in figure switch S is closed at time t=0 Takin left to right current through the indcutor as apositive current, current through i

Last Answer : In the circuit shown in figure switch S is closed at time t=0 Takin left to right current through the ... inductor varies with time as A. B. C. D.

In the circuit shown in figure switch S is closed at time t=0 At what time current through `3Omega` resistance and 1H inductor are equal?

Description : In the circuit shown in figure switch S is closed at time t=0 At what time current through `3Omega` resistance and 1H inductor are equal?

Last Answer : In the circuit shown in figure switch S is closed at time t=0 At what time current through `3Omega` resistance and ... 5)/(3))` D. `Insqrt((8)/(3))`

In the circuit shown in figure switch S is closed at time t=0 Current I from the battery at time t is given by

Description : In the circuit shown in figure switch S is closed at time t=0 Current I from the battery at time t is given by

Last Answer : In the circuit shown in figure switch S is closed at time t=0 Current I from the battery at time t is given by A. ` ... 3(1-e^(-t//9)) D. `3-e^(-2t)`

In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt(3))/(2) mF`. Current in `L - R_(1)` circuit is

Description : In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt(3))/(2) mF`. Current in `L - R_(1)` circuit is

Last Answer : In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt( ... 10 sqrt(2) A` C. `20 sqrt(2) A` D. `25 A`

In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt(3))/(2) mF`. Current in `L - R_(1)` circuit is

Description : In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt(3))/(2) mF`. Current in `L - R_(1)` circuit is

Last Answer : In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt(3) ... 2) A` C. `5 sqrt(6) A` D. `5 sqrt(3) A`

The purpose of the bias winding in figure 'B' shown in the illustration is for ____________. EL-0091 A. changing the direction of current in the control winding B. setting the operating point of the device C. allowing the use of either AC or DC in the load circuit D. changing the direction of current through the load

Description : The purpose of the bias winding in figure 'B' shown in the illustration is for ____________. EL-0091 A. changing the direction of current in the control winding B. setting the operating point of the ... use of either AC or DC in the load circuit D. changing the direction of current through the load

Last Answer : Answer: B

A hydrogen atom in the normal state is located at a distance `r = 2.5 cm` from a long straight conductor carrying a current `I = 10A`. Find the maximu

Description : A hydrogen atom in the normal state is located at a distance `r = 2.5 cm` from a long straight conductor carrying a current `I = 10A`. Find the maximu

Last Answer : A hydrogen atom in the normal state is located at a distance `r = 2.5 cm` from a long straight ... = 10A`. Find the maximum force acting on the atom.

Two coils have a mutual inductance 0.005H. The current changes in the first coil according to the equation `I=I_(0) sin omegat "where" I_(0)=10A and o

Description : Two coils have a mutual inductance 0.005H. The current changes in the first coil according to the equation `I=I_(0) sin omegat "where" I_(0)=10A and o

Last Answer : Two coils have a mutual inductance 0.005H. The current changes in the first coil according to the equation `I ... (pi//x)` volts. Find the value of x.

In the illustrated motor controller, the motor fails to start. A voltmeter reading between 1 and 6 reads line voltage, while the voltmeter reading between 2 and 6 reads 0 VAC. The problem is __________. EL-0007 A. the control fuse is the wrong amperage not allowing full current to pass through B. the stop switch is open C. an open in the 'M' coil, 'Ma' contact/start switch or overload contacts D. fuse '10a' is blown

Description : In the illustrated motor controller, the motor fails to start. A voltmeter reading between 1 and 6 reads line voltage, while the voltmeter reading between 2 and 6 reads 0 VAC. The problem is __________. EL- ... in the 'M' coil, 'Ma' contact/start switch or overload contacts D. fuse '10a' is blown

Last Answer : Answer: B

Find the magnetic field intensity at the centre O of a square of the sides equal to 5m and carrying 10A of current. a) 1.2 b) 1 c) 1.6 d) 1.8

Description : Find the magnetic field intensity at the centre O of a square of the sides equal to 5m and carrying 10A of current. a) 1.2 b) 1 c) 1.6 d) 1.8

Last Answer : d) 1.8

Find the current in a conductor with resistance 2 ohm, electric field 2 units and distance 100cm. a) 1A b) 10mA c) 10A d) 100mA

Description : Find the current in a conductor with resistance 2 ohm, electric field 2 units and distance 100cm. a) 1A b) 10mA c) 10A d) 100mA

Last Answer : a) 1A

A 1000W heater is rated to operate at a direct current (DC) of 10A. If the heater is supplied alternating

Description : A 1000W heater is rated to operate at a direct current (DC) of 10A. If the heater is supplied alternating current (AC) for producing the same quantity of heat the value of current should be  a. Iav=10A b. Irms=10A c. Ipeak=10A 

Last Answer : A 1000W heater is rated to operate at a direct current (DC) of 10A. If the heater is supplied alternating current (AC) for producing the same quantity of heat the value of current should be Irms=10A

A single-phase full-bridge diode rectifier delivers a load current of 10A, which is ripple free.

Description : A single-phase full-bridge diode rectifier delivers a load current of 10A, which is ripple free. Average and rms values of diode currents are respectively   (a) 10A, 7.07A (b) 5A, 10A (c) 5A, 7.07A (d) 7.07A, 5A

Last Answer : A single-phase full-bridge diode rectifier delivers a load current of 10A, which is ripple free. Average and rms values of diode currents are respectively 5A, 7.07A

In a d.c. series motor, the torque developed is 20 Nm at 10A. If the load current is doubled, the new torque will be : -

Description : In a d.c. series motor, the torque developed is 20 Nm at 10A. If the load current is doubled, the new torque will be : -  a) 60 Nm b) 45 Nm c) 80 Nm d) 100 Nm

Last Answer : In a d.c. series motor, the torque developed is 20 Nm at 10A. If the load current is doubled, the new torque will be : - 80 Nm

circuit I mean What ?

Last Answer : electricity Source , conductor , control Instruments , Usage Machines , Protection Machines In combination Such A Path Whose The middle With Current Flowing To be Can Him Circuit Or Circuit Says.

A 0-10 mA PMMC ammeter reads 5mA in a circuit; its bottom control spring snaps out suddenly the meter will now read. a) 5mA b) 10mA c) 2.5mA d) 0

Description : A 0-10 mA PMMC ammeter reads 5mA in a circuit; its bottom control spring snaps out suddenly the meter will now read. a) 5mA b) 10mA c) 2.5mA d) 0

Last Answer : Ans: 0

indicate the false statement.TheSWRon a transmissionline isinfinity;the line isterminated in a. a short circuit b. acompleximpedance c. an open circuit d. a pure reactance

Description : indicate the false statement.TheSWRon a transmissionline isinfinity;the line isterminated in a. a short circuit b. acompleximpedance c. an open circuit d. a pure reactance

Last Answer : b. acompleximpedance

After a black out the emergency generator comes on; On restoring the main supply we are closing the circuit breaker of the main generator without bothering about synchronizing. How is this possible?

Description : After a black out the emergency generator comes on; On restoring the main supply we are closing the circuit breaker of the main generator without bothering about synchronizing. How is this possible?

Last Answer : There is a power link connection breaker between the main generator and the emergency generator. During black out, this breaker trips. The emergency generator starts and its breaker closes and feeds only ... , there is no paralleling between main and emergency generator. Ask E/O for more details.

What is a self-monitoring alarm circuit?

Description : What is a self-monitoring alarm circuit?

Last Answer : It self monitors the health of the alarm circuit. That is, it senses whether the power supply to the alarm circuit is healthy and all the relays and contacts are functioning normally. Check with E/O for more details.

What is meaning of short circuit?

Description : What is meaning of short circuit?

Last Answer : A short circuit occurs when conductors are connected (shorted) together by a fault. This is normally phase to phase fault due to failure of insulation by something cutting the wires, fires, etc.

Can you draw a DOL starter circuit?

Description : Can you draw a DOL starter circuit?

Last Answer : Refer to DOL diagram in Dennis T Hall

The circuit which changes input signal at output with phase shift of 1800 is called (a) Amplifier (b) operational amplifier (c) switch (d) inverter

Description : The circuit which changes input signal at output with phase shift of 1800 is called (a) Amplifier (b) operational amplifier (c) switch (d) inverter

Last Answer : (d) inverter

The number of diodes used in bridge rectifier circuit is (a) 4 (b) 3 (c) 2 (d)

Description : The number of diodes used in bridge rectifier circuit is (a) 4 (b) 3 (c) 2 (d)

Last Answer : (a) 4

The induced emf is produced in a circuit due to: a. Initial magnetic flux b. final magnetic flux c. Change of magnetic flux d. constant magnetic flux

Description : The induced emf is produced in a circuit due to: a. Initial magnetic flux b. final magnetic flux c. Change of magnetic flux d. constant magnetic flux

Last Answer : d. constant magnetic flux

A circuit which develops voltage across the horizontal deflection plates is known as a) Time base generator b) Electron gun c) Thermionic diode d) Zener diode

Description : A circuit which develops voltage across the horizontal deflection plates is known as a) Time base generator b) Electron gun c) Thermionic diode d) Zener diode

Last Answer : a) Time base generator

Circuit which gives continuously varying potential is called a. complex network b. wheat stone bridge c. potential divider d. all of above

Description : Circuit which gives continuously varying potential is called a. complex network b. wheat stone bridge c. potential divider d. all of above

Last Answer : c. potential divider

Refer to the circuit below . The power consumed by the element E is equal

Description : الرجوع إلى الدائرة أدناه. الطاقة التي يستهلكها العنصر E متساوية.

Last Answer : The power consumed the element E is equal to the  : P = V x I = 6V x 1 A = 6 W

Refer to the circuit below. The voltage V2, is equal to:

Description : Refer to the circuit below. The voltage V2, is equal to:

Last Answer : The answer to this question is -3V. Because 3V is in parallel with v2 and voltages in parallel are equal. But it is in opposite direction so the answer is -3V.

Briefly explain how the power factor of an inductive circuit can be improved.

Description : Briefly explain how the power factor of an inductive circuit can be improved.

Last Answer : As we know that power factor should be corrected to ensure that the current supplied is cost friendly. Meaning the power factor should be around one but not greater than one(0.8-0.9) in a ... an inductive circuit due to the inductive reactance which oppose the change of current in the ac circuit. 

What is electrical circuit ?

Description : What is electrical circuit ?

Last Answer : An electric circuit is the interconnection of electrical elements. Electrical elements like battery, lamp, wire etc.

A circuit breaker is designed to protect an electrical circuit from damage caused by :

Description : A circuit breaker is designed to protect an electrical circuit from damage caused by :  (A) Over load (B) Short circuit (C) Over current (D) All of the above

Last Answer : A circuit breaker is designed to protect an electrical circuit from damage caused by :  (A) Over load (B) Short circuit (C) Over current (D) All of the above

An electrical circuit with 10 branches and 7 junctions will have

Description : An electrical circuit with 10 branches and 7 junctions will have

Last Answer : An electrical circuit with 10 branches and 7 junctions will have  4 loop equations.

The resistance of a few meters of wire conductor in closed electrical circuit is?

Description : The resistance of a few meters of wire conductor in closed electrical circuit is?

Last Answer : The resistance of a few meters of wire conductor in closed electrical circuit is practically zero.

Power factor of an electrical circuit is equal to?

Description : Power factor of an electrical circuit is equal to?

Last Answer : Power factor of an electrical circuit is equal to R/Z, cosine of phase angle difference between current and voltage, kW/kVA.

What is a node in an electrical circuit?

Description : What is a node in an electrical circuit?

Last Answer : a positively charged electrons

A circular coil of `20turns` and radius `10cm` carries a current of `5A`. It is placed in a uniform magnetic field of `0*10T`. Find the torque acting

Description : A circular coil of `20turns` and radius `10cm` carries a current of `5A`. It is placed in a uniform magnetic field of `0*10T`. Find the torque acting

Last Answer : A circular coil of `20turns` and radius `10cm` carries a current of `5A`. It is placed in a uniform magnetic ... Nm B. 3.14 Nm C. 0.314 Nm D. zero

Why earth fault current of generator should not be reduced below 5A?

Description : Why earth fault current of generator should not be reduced below 5A? 

Last Answer : To limit over voltage due to neutral shift.  

Calculate the flux density due to a circular conductor of radius 100nm and current 5A in air. a) 10 b) 100 c) 0.1 d) 1

Description : Calculate the flux density due to a circular conductor of radius 100nm and current 5A in air. a) 10 b) 100 c) 0.1 d) 1

Last Answer : a) 10