Which one of the following bulbs has the least resistance? a. 100 watt b. 200 watt c. 300 watt d. 60 watt

Which one of the following bulbs has the least resistance?
a. 100 watt b. 200 watt
c. 300 watt d. 60 watt
by

1 Answer

Answer :

c. 300 wat
by

Related questions

Three bulbs are rating 40W 60W and 100W designed to work on 220V mains. Which bulb will burn most brightly if they are connected in series across 220 V mains? a. 40 W bulb b. 60 W blub c. 100 W blub d. all will burn equally brightly

Description : Three bulbs are rating 40W 60W and 100W designed to work on 220V mains. Which bulb will burn most brightly if they are connected in series across 220 V mains? a. 40 W bulb b. 60 W blub c. 100 W blub d. all will burn equally brightly

Last Answer : a. 40 W bulb

Two 100 watt light bulbs are connected in parallel across a 100 volt power supply. The total power developed in the circuit is _______________. A. 200 watts B. 100 watts C. 50 watts D. equal to the product of the amperes times the voltage in each branch

Description : Two 100 watt light bulbs are connected in parallel across a 100 volt power supply. The total power developed in the circuit is _______________. A. 200 watts B. 100 watts C. 50 watts D. equal to the product of the amperes times the voltage in each branch

Last Answer : Answer: A

Two bulbs marked 200 watt-250 volts and 100 watt-250 volts are joined...

Description : Two bulbs marked 200 watt-250 volts and 100 watt-250 volts are joined in series to 250 volts supply. Power consumed in circuit is 

Last Answer : Two bulbs marked 200 watt-250 volts and 100 watt-250 volts are joined in series to 250 volts supply. Power consumed in circuit is 67 watt.

Is the filament resistance lower or higher in a 500 watt light bulb than in a 100 watt light? Assume that both bulbs have been designed to operate at 110 volts.

Description : Is the filament resistance lower or higher in a 500 watt light bulb than in a 100 watt light? Assume that both bulbs have been designed to operate at 110 volts. 

Last Answer : ANSWER: LOWER

0.001 Kg mass will be equivalent to a) 2.50 Giga watt hour b) 25.00 giga watt hour c) 0.26 giga watt hour d) None of the above

Description : 0.001 Kg mass will be equivalent to a) 2.50 Giga watt hour b) 25.00 giga watt hour c) 0.26 giga watt hour d) None of the above

Last Answer : b) 25.00 giga watt hour

What is the equivalent of 100 watt incandescent light bulbs in LED light bulbs?

Description : What is the equivalent of 100 watt incandescent light bulbs in LED light bulbs?

Last Answer : That is a very good question, so I ended up doing a little research on the internet to find the information. It appears in order to match the intensity of a 100watt light bulb, you'll need 15watts of LED light bulbs.

There are three bulbs of 60W 100W and 200W which bulb has thickest filament. a. 100W b. 200W c. 60W d. All

Description : There are three bulbs of 60W 100W and 200W which bulb has thickest filament. a. 100W b. 200W c. 60W d. All

Last Answer : b. 200W

Two bulbs consume same energy when operated at `200 V and 300 V` , respectively . When these bulbs are connected in series across a dc source of `500

Description : Two bulbs consume same energy when operated at `200 V and 300 V` , respectively . When these bulbs are connected in series across a dc source of `500

Last Answer : Two bulbs consume same energy when operated at `200 V and 300 V` , respectively . When these bulbs ... ratio of powers consumed across them is `2//3`

The size of a single plant cell is usually within the range of A.10-20μm in diameter and 25-100μm long B.20-40μm in diameter and 100-200μm long C.40-60μm in diameter and 200-300μm long D.60-80μm in diameter and 300-400μm long

Description : The size of a single plant cell is usually within the range of A.10-20μm in diameter and 25-100μm long B.20-40μm in diameter and 100-200μm long C.40-60μm in diameter and 200-300μm long D.60-80μm in diameter and 300-400μm long

Last Answer : B.20-40μm in diameter and 100-200μm long

The size of a single plant cell is usually within the range of A.10-20μm in diameter and 25-100μm long B.20-40μm in diameter and 100-200μm long C.40-60μm in diameter and 200-300μm long D.60-80μm in diameter and 300-400μm long

Description : The size of a single plant cell is usually within the range of A.10-20μm in diameter and 25-100μm long B.20-40μm in diameter and 100-200μm long C.40-60μm in diameter and 200-300μm long D.60-80μm in diameter and 300-400μm long

Last Answer : B.20-40μm in diameter and 100-200μm long

Recommended capacity of the seed box or hopper for tractor mounted (large size) seed drill is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Description : Recommended capacity of the seed box or hopper for tractor mounted (large size) seed drill is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Last Answer : d. 200-300 lit

Recommended capacity of the seed box or hopper for tractor mounted(small size) seed drill is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Description : Recommended capacity of the seed box or hopper for tractor mounted(small size) seed drill is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Last Answer : c. 100-150 lit

Recommended capacity of the seed box or hopper for animal drawn is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Description : Recommended capacity of the seed box or hopper for animal drawn is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Last Answer : b. 10-60 lit

Recommended capacity of the seed box or hopper for manually operated seeder is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Description : Recommended capacity of the seed box or hopper for manually operated seeder is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Last Answer : a. 2-10 lit

The largest book, the super book, is ?? and weight is ?? General Knowledge Multiple Choice Quiz Questions A. 270 cm, 300 cm, 252 kg. B. 100 cm, 110 cm, 100 kg. C. 200 cm, 100 cm, 60 kg. D. None of these

Description : The largest book, the super book, is ?? and weight is ?? General Knowledge Multiple Choice Quiz Questions A. 270 cm, 300 cm, 252 kg. B. 100 cm, 110 cm, 100 kg. C. 200 cm, 100 cm, 60 kg. D. None of these

Last Answer : A. 270 cm, 300 cm, 252 kg.

The ratio of the monthly salaries of A and B is in the ratio 15 : 16 and that of B and C is in the ratio 17 : 18. Find the monthly income of C if the total of their monthly salary is Rs 1,87,450. A) Rs 66,240 B) Rs 72,100 C) Rs 62,200 D) Rs 65,800 E) Rs 60,300

Description : The ratio of the monthly salaries of A and B is in the ratio 15 : 16 and that of B and C is in the ratio 17 : 18. Find the monthly income of C if the total of their monthly salary is Rs 1,87,450. A) Rs 66,240 B) Rs 72,100 C) Rs 62,200 D) Rs 65,800 E) Rs 60,300

Last Answer : Answer: A A/B = 15/16 and B/C = 17*18 So A : B : C = 15*17 : 16*17 : 16*18 = 255 : 272 : 288 So C’s salary = [288/(255+272+288)] * 1,87,450= Rs 66,240

A galvanometer having a resistance of 4.5 Ω can read up to 5 mA. If it is to read 100 V, then the high resistance to be used in series will be a) 19998 Ω b) 19995.8 Ω c) 19995.5 Ω d) 19996.5 Ω

Description : A galvanometer having a resistance of 4.5 Ω can read up to 5 mA. If it is to read 100 V, then the high resistance to be used in series will be a) 19998 Ω b) 19995.8 Ω c) 19995.5 Ω d) 19996.5 Ω

Last Answer : c) 19995.5

If a transmission line has a power loss of 6 dB per 100 feet, what is the power at the feed point to the antenna at the end of a 200 foot transmission line fed by a 100 watt transmitter? A. 70 watts B. 50 watts C. 25 watts D. 6 watts

Description : If a transmission line has a power loss of 6 dB per 100 feet, what is the power at the feed point to the antenna at the end of a 200 foot transmission line fed by a 100 watt transmitter? A. 70 watts B. 50 watts C. 25 watts D. 6 watts

Last Answer : D. 6 watts

Would you have use for candelabra bulbs that were energy saving (CFL or LED), yet produced 75+ watt light equivalent?

Description : Would you have use for candelabra bulbs that were energy saving (CFL or LED), yet produced 75+ watt light equivalent?

Last Answer : answer:No, because I ate my vegetables when I was a kid and don't have a Daylight only restriction on my drivers license. Seriously though, like many people, my home lighting is 40W-equivalent for ... the lower wattage bulbs are plenty bright enough for most people. TL:DR - it's lack of demand.

Two bulbs of 500 W and 200 W rated at 250 V will have resistance ratio as?

Description : Two bulbs of 500 W and 200 W rated at 250 V will have resistance ratio as?

Last Answer : Two bulbs of 500 W and 200 W rated at 250 V will have resistance ratio as 2 : 5.

Which of the following statements is true if a 100 watt lamp and a 75 watt lamp are connected in parallel across a 100 volt power supply? A. The 75 watt lamp will draw as much current as the 100 watt lamp. B. The 100 watt lamp will have a greater resistance. C. Current flow will be the same across each lamp. D. The 75 watt lamp will have a higher resistance.

Description : Which of the following statements is true if a 100 watt lamp and a 75 watt lamp are connected in parallel across a 100 volt power supply? A. The 75 watt lamp will draw as much current as the 100 ... Current flow will be the same across each lamp. D. The 75 watt lamp will have a higher resistance.

Last Answer : Answer: D

Two bulbs 60 W and 100 W designed for voltage 220 V are connected in series across 220 V source. The net power dissipated is

Description : Two bulbs 60 W and 100 W designed for voltage 220 V are connected in series across 220 V source. The net power dissipated is

Last Answer : Two bulbs 60 W and 100 W designed for voltage 220 V are connected in series across 220 V source. The net power ... B. 160 W C. `37.5 W` D. 60 W

Two bulbs 60 W and 100 W designed for voltage 220 V are connected in series across 220 V source. The net power dissipated is

Description : Two bulbs 60 W and 100 W designed for voltage 220 V are connected in series across 220 V source. The net power dissipated is

Last Answer : Two bulbs 60 W and 100 W designed for voltage 220 V are connected in series across 220 V source. The net power ... `37.5` W B. 75W C. 80W D. 40 W

The phenomena of pair production occurs only when the energy of incident photon is least equal a) 10.2 MeV b) 1.02 MeV c) 1.02 eV d) 0.102 MeV

Description : The phenomena of pair production occurs only when the energy of incident photon is least equal a) 10.2 MeV b) 1.02 MeV c) 1.02 eV d) 0.102 MeV

Last Answer : b) 1.02 MeV

For achieving rapid drying rate in a spray dryer, the diameter of the particles in the feed should be in the range of __________ microns (1 mm = 1000 microns). (A) 1-5 (B) 10-60 (C) 200-300

Description : For achieving rapid drying rate in a spray dryer, the diameter of the particles in the feed should be in the range of __________ microns (1 mm = 1000 microns). (A) 1-5 (B) 10-60 (C) 200-300

Last Answer : (B) 10-60

Compensation of letter and bulk bag of foreign articles are a) 220(60 gold francs) & 1110( 300 gold francs) b) 110(60 gold francs) & 1110( 300 gold francs) c) 200(60 gold francs) & 1000( 300 gold francs) d) None of the above

Description : Compensation of letter and bulk bag of foreign articles are a) 220(60 gold francs) & 1110( 300 gold francs) b) 110(60 gold francs) & 1110( 300 gold francs) c) 200(60 gold francs) & 1000( 300 gold francs) d) None of the above

Last Answer : b) It can be registered with an note that the deficiency would be collected from addresse

Mercury electrolytic cell produces 50-70% NaOH solution. Its operating temperature is __________ °C. (A) 25 (B) 60-70 (C) 150-200 (D) 250-300

Description : Mercury electrolytic cell produces 50-70% NaOH solution. Its operating temperature is __________ °C. (A) 25 (B) 60-70 (C) 150-200 (D) 250-300

Last Answer : (B) 60-70

The injection pressure of ic engine used on tractors is in range of kg/cm2 1. 0-6 2. 60-120 3. 120-200 4. 200-300

Description : The injection pressure of ic engine used on tractors is in range of kg/cm2 1. 0-6 2. 60-120 3. 120-200 4. 200-300

Last Answer : ans 3

Service life of improved SEJ of 60 Kg rail is:- (a) 400 GMT. (b) 300 GMT. (c) 200 GMT.* (d) 150 GMT.

Description : Service life of improved SEJ of 60 Kg rail is:- (a) 400 GMT. (b) 300 GMT. (c) 200 GMT.* (d) 150 GMT.

Last Answer : (c) 200 GMT.

Service life of Glued insulated rail joint of 60 Kg rail is:- (a) 300 GMT. (b) 200 GMT.* (c) 400 GMT. (d) 150 GMT.

Description : Service life of Glued insulated rail joint of 60 Kg rail is:- (a) 300 GMT. (b) 200 GMT.* (c) 400 GMT. (d) 150 GMT.

Last Answer : (b) 200 GMT.

Name a website where I can earn at least 200-300 rupees per week ?

Last Answer : You can earn 200-300 rupees a day from this site Ojooo.Wad .

What happens to resistance of conductors when temperature rises?

Description : What happens to resistance of conductors when temperature rises?

Last Answer : For conductors an increase in temperature will cause their resistance to increase.

If PN junction is forward biased its resistance is (a) Zero (b) Infinity (c) A few ohm (d) A few kilo ohms

Description : If PN junction is forward biased its resistance is (a) Zero (b) Infinity (c) A few ohm (d) A few kilo ohms

Last Answer : c) A few ohm

The emitter of a transistor is doped the heaviest because it: (a) Acts as a supplier of charge carriers (b) Dissipates maximum power c) has a large resistance (d) has a small resistance

Description : The emitter of a transistor is doped the heaviest because it: (a) Acts as a supplier of charge carriers (b) Dissipates maximum power c) has a large resistance (d) has a small resistance

Last Answer : (a) Acts as a supplier of charge carriers

The operational amplifier is _______ (a) High gain amplifier (b) high power amplifier (c)high resistance amplifier (d)low resistance amplifier

Description : The operational amplifier is _______ (a) High gain amplifier (b) high power amplifier (c)high resistance amplifier (d)low resistance amplifier

Last Answer : a) High gain amplifier

The induced emf in a coil depends upon: a. Strength of magnetic field b. Resistance of the coil c. area of the coil d. All of them

Description : The induced emf in a coil depends upon: a. Strength of magnetic field b. Resistance of the coil c. area of the coil d. All of them

Last Answer : d. All of them

The current flowing in a coil due to induced emf depends upon: a. shape of coil b. resistance of coil c. area of coil d. magnetic flux

Description : The current flowing in a coil due to induced emf depends upon: a. shape of coil b. resistance of coil c. area of coil d. magnetic flux

Last Answer : a. shape of coil

A galvanometer has resistance of 120 Ω. In order to pass 5% of the main current in it, the value of shunt resistance Rs must be equal to a) 6.3 Ω b) 6 Ω c) 2 Ω d) 2.3 Ω

Description : A galvanometer has resistance of 120 Ω. In order to pass 5% of the main current in it, the value of shunt resistance Rs must be equal to a) 6.3 Ω b) 6 Ω c) 2 Ω d) 2.3 Ω

Last Answer : a) 6.3 Ω

A galvanometer of 65 Ω resistance gives full scale deflection with 4 mA current. In order to convert it into ammeter, the range of 10 A is connected with it, the shunt resistance should be a) 0.1 Ω b) 0.2 Ω c) 0.06 Ω d) 0.03 Ω

Description : A galvanometer of 65 Ω resistance gives full scale deflection with 4 mA current. In order to convert it into ammeter, the range of 10 A is connected with it, the shunt resistance should be a) 0.1 Ω b) 0.2 Ω c) 0.06 Ω d) 0.03 Ω

Last Answer : d) 0.03 Ω

A multipurpose instrument for measuring current, potential difference and resistance is a) Ohmmeter b) Astatic galvanometer c) Rheostat d) AVO Meter

Description : A multipurpose instrument for measuring current, potential difference and resistance is a) Ohmmeter b) Astatic galvanometer c) Rheostat d) AVO Meter

Last Answer : d) AVO Meter

Shunt resistance Rs is given as a) Ig I−Ig Rg b) Ig I+Ig Rg c) I I−Ig Rg d) None of these

Description : Shunt resistance Rs is given as a) Ig I−Ig Rg b) Ig I+Ig Rg c) I I−Ig Rg d) None of these

Last Answer : a) Ig I−Ig Rg

Desirable resistance of a ________ is achieved by connecting a high resistance Rh in series with a galvanometer a) Ammeter b) Ohmmeter c) LED d) Voltmeter

Description : Desirable resistance of a ________ is achieved by connecting a high resistance Rh in series with a galvanometer a) Ammeter b) Ohmmeter c) LED d) Voltmeter

Last Answer : d) Voltmeter

The fractional change in resistance per kelvin is known as, a. temperature coefficient of resistance b. coefficient of Voltage of charge c. thermal expansion d. all of above

Description : The fractional change in resistance per kelvin is known as, a. temperature coefficient of resistance b. coefficient of Voltage of charge c. thermal expansion d. all of above

Last Answer : a. temperature coefficient of resistance

When the potential difference of 4 volt is applied across resistance, 10J energy is converted. Find the charge flows. a. 0.20 C b. 2.5C c. 5C d. 10C

Description : When the potential difference of 4 volt is applied across resistance, 10J energy is converted. Find the charge flows. a. 0.20 C b. 2.5C c. 5C d. 10C

Last Answer : b. 2.5C

Three resistors of resistance R are connected in various ways, which of the following cannot be obtained? a. 3R ohm b. 2R/4 ohm c. R/3 ohm d. 2R/3 ohm

Description : Three resistors of resistance R are connected in various ways, which of the following cannot be obtained? a. 3R ohm b. 2R/4 ohm c. R/3 ohm d. 2R/3 ohm

Last Answer : b. 2R/4 ohm

Terminal potential difference of a battery is greater than its emf when a. the internal resistance of battery is infinite b. the internal resistance of battery is zero c. the battery is charged d. the battery is discharged

Description : Terminal potential difference of a battery is greater than its emf when a. the internal resistance of battery is infinite b. the internal resistance of battery is zero c. the battery is charged d. the battery is discharged

Last Answer : c. the battery is charged

Why should a resistance be introduced in a circuit in series deliberately? a. to increase current b. to decrease current c. to control current d. just to give a good look to circuit

Description : Why should a resistance be introduced in a circuit in series deliberately? a. to increase current b. to decrease current c. to control current d. just to give a good look to circuit

Last Answer : b. to decrease current

The resistance of a conductor at absolute zero (OK) is a. zero almost b. infinite almost c. May increase or decrease d. None

Description : The resistance of a conductor at absolute zero (OK) is a. zero almost b. infinite almost c. May increase or decrease d. None

Last Answer : zero almost

Specific resistance of a wire a. will depend on its length b. will depend on its radius c. will depend on the type of material of the wire d. will depend on none of the above

Description : Specific resistance of a wire a. will depend on its length b. will depend on its radius c. will depend on the type of material of the wire d. will depend on none of the above

Last Answer : c. will depend on the type of material of the wire

Resistance of a wire on increasing its temperature will a. increase with rise in temperature b. decrease with rise in temperature c. will remain same d. depends upon altitude of experimentation

Description : Resistance of a wire on increasing its temperature will a. increase with rise in temperature b. decrease with rise in temperature c. will remain same d. depends upon altitude of experimentation

Last Answer : a. increase with rise in temperature