The value of ∈r for various dielectrics is always: (a) Larger than unity (b) Less than unity (c) Equal to unity (d) None of above

The value of ∈r for various dielectrics is always:
(a) Larger than unity (b) Less than unity
(c) Equal to unity (d) None of above
by

1 Answer

Answer :

(a) Larger than unity
by

Related questions

The electric force between two charges placed in air is 2 Newton. When placed in a medium of ∈r = 80, the force reduced to: (a) 0.029 N (b) 0.025 N (c) 0.03 N (d) 0.04 N

Description : The electric force between two charges placed in air is 2 Newton. When placed in a medium of ∈r = 80, the force reduced to: (a) 0.029 N (b) 0.025 N (c) 0.03 N (d) 0.04 N

Last Answer : (b) 0.025 N

The force in a medium of relative permitivity ∈r is given by: (a) F′ =F (b) F′ =∈r ∈ F r (c) F′ = ∈r . F (d) F′ =F ∈ ∈

Description : The force in a medium of relative permitivity ∈r is given by: (a) F′ =F (b) F′ =∈r ∈ F r (c) F′ = ∈r . F (d) F′ =F ∈ ∈

Last Answer : (a) F′ =F

Paramagnetic materials have relative permeability (a) slightly less than unity (b) equal to unity (c) slightly more than unity (d) equal to that ferromagnetic mate rials

Description : Paramagnetic materials have relative permeability (a) slightly less than unity (b) equal to unity (c) slightly more than unity (d) equal to that ferromagnetic mate rials

Last Answer : (c) slightly more than unity

Under ideal conditions, the collector current is (a) Equal to base current (b) Nearly equal to emitter current (c) Less than base current (d) always zero

Description : Under ideal conditions, the collector current is (a) Equal to base current (b) Nearly equal to emitter current (c) Less than base current (d) always zero

Last Answer : (b) Nearly equal to emitter current

The value of COP in vapour compression cycle is usually (a) always less than unity (b) always more than unity (c) equal to unity (d) any one of the above

Description : The value of COP in vapour compression cycle is usually (a) always less than unity (b) always more than unity (c) equal to unity (d) any one of the above

Last Answer : Ans: b

The transfer function of a system is 10/(1+s) when operating as a unity feedback system, the steady state error to a step input will be a) 0 b) 1/11 c) 10 d) Infinity

Description : The transfer function of a system is 10/(1+s) when operating as a unity feedback system, the steady state error to a step input will be a) 0 b) 1/11 c) 10 d) Infinity

Last Answer : Ans: 1/11

In a half wave rectifier the rms value of AC component of the waves (a) Zero (b) Equal to DC value (c) More than DC value (d) Less than DC value

Description : In a half wave rectifier the rms value of AC component of the waves (a) Zero (b) Equal to DC value (c) More than DC value (d) Less than DC value

Last Answer : b) Equal to DC value

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

In a thyristor Latching current is ________ than Holding current a) Equal b) Less c) Greater d) None

Description : In a thyristor Latching current is ________ than Holding current a) Equal b) Less c) Greater d) None

Last Answer : Ans: Greater

Electron can exist in the atom but outside the nucleus because a) speed of electron is equal to the speed of light b) speed of electron is more than speed of light c) speed of electron is less than speed of light d) None of these

Description : Electron can exist in the atom but outside the nucleus because a) speed of electron is equal to the speed of light b) speed of electron is more than speed of light c) speed of electron is less than speed of light d) None of these

Last Answer : c) speed of electron is less than speed of light

In p-n-p transistor, collector current is (a) Equal to emitter current (b) slightly less than emitter current (c) greater than emitter current (d) any of above

Description : In p-n-p transistor, collector current is (a) Equal to emitter current (b) slightly less than emitter current (c) greater than emitter current (d) any of above

Last Answer : (c) greater than emitter current

Devices which convert various physical quantities into electrical voltage are known as (a) Control system (b) sensors (c) level sensors (d) LDR

Description : Devices which convert various physical quantities into electrical voltage are known as (a) Control system (b) sensors (c) level sensors (d) LDR

Last Answer : (b) sensors

The electronic circuits which implement the various logic operations are called ________ (a) Logic gates (b) Boolean algebra (c) amplifier gain (d) logic functions

Description : The electronic circuits which implement the various logic operations are called ________ (a) Logic gates (b) Boolean algebra (c) amplifier gain (d) logic functions

Last Answer : a) Logic gates

Three resistors of resistance R are connected in various ways, which of the following cannot be obtained? a. 3R ohm b. 2R/4 ohm c. R/3 ohm d. 2R/3 ohm

Description : Three resistors of resistance R are connected in various ways, which of the following cannot be obtained? a. 3R ohm b. 2R/4 ohm c. R/3 ohm d. 2R/3 ohm

Last Answer : b. 2R/4 ohm

A galvanometer has resistance of 120 Ω. In order to pass 5% of the main current in it, the value of shunt resistance Rs must be equal to a) 6.3 Ω b) 6 Ω c) 2 Ω d) 2.3 Ω

Description : A galvanometer has resistance of 120 Ω. In order to pass 5% of the main current in it, the value of shunt resistance Rs must be equal to a) 6.3 Ω b) 6 Ω c) 2 Ω d) 2.3 Ω

Last Answer : a) 6.3 Ω

.In electromagneticwaves,polarization a. is caused by reflection b.isdue to the transversenature ofthewaves c. results from the longitudinal nature of the waves d. is always vertical in an isotropic medium

Description : .In electromagneticwaves,polarization a. is caused by reflection b.isdue to the transversenature ofthewaves c. results from the longitudinal nature of the waves d. is always vertical in an isotropic medium

Last Answer : b.isdue to the transversenature ofthewaves

An ideal transformer always obeys the law of conservation of........: a. energy b. momentum c. charge d. Flux

Description : An ideal transformer always obeys the law of conservation of........: a. energy b. momentum c. charge d. Flux

Last Answer : b. momentum

“The direction of induced current is always so as to oppose the change which causes the Current” is the statement of: a. Faraday’s law b. Lenz’s Law c. Ohm’s Law d. Kirchoff’s rule.

Description : “The direction of induced current is always so as to oppose the change which causes the Current” is the statement of: a. Faraday’s law b. Lenz’s Law c. Ohm’s Law d. Kirchoff’s rule.

Last Answer : c. Ohm’s Law

Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio (above the minimum reflux ratio), the fixed cost of the distillation column first increases and then decreases (C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Description : Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio ( ... (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Last Answer : C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux

Substances which have permeability less than the permeability of free space are known as (a) ferromagnetic (b) paramagnetic (c) diamagnetic (d) bipolar

Description : Substances which have permeability less than the permeability of free space are known as (a) ferromagnetic (b) paramagnetic (c) diamagnetic (d) bipolar

Last Answer : (c) diamagnetic

A typical nucleus is less than _____ in diameter. a) 1010 m b) 10-10 m c) 1014 m d) 10 -14 m

Description : A typical nucleus is less than _____ in diameter. a) 1010 m b) 10-10 m c) 1014 m d) 10 -14 m

Last Answer : d) 10 -14 m

In order to obtain spectrum from the emitted radiation, the atomic gas or vapour must be excited at a) much less than atmospheric pressure b) much high than atmospheric pressure c) atmospheric pressure d) high pressure and temperature

Description : In order to obtain spectrum from the emitted radiation, the atomic gas or vapour must be excited at a) much less than atmospheric pressure b) much high than atmospheric pressure c) atmospheric pressure d) high pressure and temperature

Last Answer : a) much less than atmospheric pressure

The minimum charge on any electron be less than: (a) 1.6×10−19C (b) 3.2×10−19C (c) 1.8×10−19C (d) 9.1×10−19C

Description : The minimum charge on any electron be less than: (a) 1.6×10−19C (b) 3.2×10−19C (c) 1.8×10−19C (d) 9.1×10−19C

Last Answer : (a) 1.6×10−19C

For the air water system under ambient conditions, the adiabatic saturation temperature and the wet bulb temperature are nearly equal, because (A) Water has a high latent heat of evaporation (B) Lewis number is close to unity (C) They are always equal under all circumstances

Description : For the air water system under ambient conditions, the adiabatic saturation temperature and the wet bulb temperature are nearly equal, because (A) Water has a high latent heat of evaporation (B) Lewis number is close to unity (C) They are always equal under all circumstances

Last Answer : (A) Water has a high latent heat of evaporation

Pick out the correct statement pertaining to the flow through a converging-diverging tube. (A) The value of Mach number is always unity at the throat (B) No shock wave develops in the tube when the Mach number at exit is greater than unity (C) Throughout the converging portion of the tube, the density increases in the downstream direction (D) None of these

Description : Pick out the correct statement pertaining to the flow through a converging-diverging tube. (A) The value of Mach number is always unity at the throat (B) No shock wave develops in the tube ... the converging portion of the tube, the density increases in the downstream direction (D) None of these

Last Answer : (B) No shock wave develops in the tube when the Mach number at exit is greater than unity

The two conductors of a transmission line carry equal current I in opposite directions. The force on each conductor is (a) proportional to 7 (b) proportional to X (c) proportional to distance between the conductors (d) inversely proportional to I

Description : The two conductors of a transmission line carry equal current I in opposite directions. The force on each conductor is (a) proportional to 7 (b) proportional to X (c) proportional to distance between the conductors (d) inversely proportional to I

Last Answer : (b) proportional to X

For Hydrogen atom, the allowed stationary orbits are those whose orbital angular momentum is equal to an integral multiple of h i.e., mvr = a) nh/2π b) nh x 2π c) nh / 2λ d) nh / 2πλ

Description : For Hydrogen atom, the allowed stationary orbits are those whose orbital angular momentum is equal to an integral multiple of h i.e., mvr = a) nh/2π b) nh x 2π c) nh / 2λ d) nh / 2πλ

Last Answer : a) nh/2π

The product of uncertainties of two physical observables must be approximately equal to a)Coulomb’s constant K b) Rydberg’s constant R c)Planck’s constant d)All of the above

Description : The product of uncertainties of two physical observables must be approximately equal to a)Coulomb’s constant K b) Rydberg’s constant R c)Planck’s constant d)All of the above

Last Answer : c)Planck’s constant

A body will behave as an “ideal black body” when it acts as: a) A perfect absorber b) A perfect radiator c) A body to have absorption power equal to one d) All of the above

Description : A body will behave as an “ideal black body” when it acts as: a) A perfect absorber b) A perfect radiator c) A body to have absorption power equal to one d) All of the above

Last Answer : d) All of the above

If a material object moves with the speed of light ‘c’ its mass becomes a) equal to its rest mass b) Four times of its rest mass c) Double of its rest mass d) Infinite

Description : If a material object moves with the speed of light ‘c’ its mass becomes a) equal to its rest mass b) Four times of its rest mass c) Double of its rest mass d) Infinite

Last Answer : d) Infinite

The phenomena of pair production occurs only when the energy of incident photon is least equal a) 10.2 MeV b) 1.02 MeV c) 1.02 eV d) 0.102 MeV

Description : The phenomena of pair production occurs only when the energy of incident photon is least equal a) 10.2 MeV b) 1.02 MeV c) 1.02 eV d) 0.102 MeV

Last Answer : b) 1.02 MeV

A rod at rest appears to an observer just a mere point when he moves across it as speed, a) Equal to the speed of light b) Double the speed of light c) Three-fourth the speed of light d) None of the above

Description : A rod at rest appears to an observer just a mere point when he moves across it as speed, a) Equal to the speed of light b) Double the speed of light c) Three-fourth the speed of light d) None of the above

Last Answer : a) Equal to the speed of light

One henry is equal to.......: a. VA/s b. Nm/A c. As/V d. Vs/A

Description : One henry is equal to.......: a. VA/s b. Nm/A c. As/V d. Vs/A

Last Answer : d. Vs/A

One henry is equal to: a. Vs-1 A b. NmA-1 c. V -1 s A d. V s A

Description : One henry is equal to: a. Vs-1 A b. NmA-1 c. V -1 s A d. V s A

Last Answer : d. V s A

A solenoid has n turns and length l. If length is reduced to l/2 and turns are doubled then magnetic field B produced by it becomes equal to a) 2B b) 4B c) 1/2 B d) None of these

Description : A solenoid has n turns and length l. If length is reduced to l/2 and turns are doubled then magnetic field B produced by it becomes equal to a) 2B b) 4B c) 1/2 B d) None of these

Last Answer : a) 2B

Which of the following does not equal the unit of magnetic flux density? a) 1 Wbm-2 b) 1 NA-1m -1 c) Both (a) and (b) d) 1 Wbm-1

Description : Which of the following does not equal the unit of magnetic flux density? a) 1 Wbm-2 b) 1 NA-1m -1 c) Both (a) and (b) d) 1 Wbm-1

Last Answer : d) 1 Wbm-1

Three equal resistors connected in series with a source of e m f together dissipate 10 W of power each. What will be the power dissipated if the same resistors are connected in parallel across the same source of e m f? a. 40 W b. 90W c. 100W d. 120W

Description : Three equal resistors connected in series with a source of e m f together dissipate 10 W of power each. What will be the power dissipated if the same resistors are connected in parallel across the same source of e m f? a. 40 W b. 90W c. 100W d. 120W

Last Answer : b. 90W

The number of electrons in one coulomb charge is equal to: (a) 6.2 × 1018 electrons (b) Zero electrons (c) 1.6 × 10−22 electrons (d) 6.2 × 1021 electrons

Description : The number of electrons in one coulomb charge is equal to: (a) 6.2 × 1018 electrons (b) Zero electrons (c) 1.6 × 10−22 electrons (d) 6.2 × 1021 electrons

Last Answer : (a) 6.2 × 1018 electrons

Refer to the circuit below . The power consumed by the element E is equal

Description : الرجوع إلى الدائرة أدناه. الطاقة التي يستهلكها العنصر E متساوية.

Last Answer : The power consumed the element E is equal to the  : P = V x I = 6V x 1 A = 6 W

Refer to the circuit below. The voltage V2, is equal to:

Description : Refer to the circuit below. The voltage V2, is equal to:

Last Answer : The answer to this question is -3V. Because 3V is in parallel with v2 and voltages in parallel are equal. But it is in opposite direction so the answer is -3V.

Power factor of an electrical circuit is equal to?

Description : Power factor of an electrical circuit is equal to?

Last Answer : Power factor of an electrical circuit is equal to R/Z, cosine of phase angle difference between current and voltage, kW/kVA.

Fan Gently If you run What? Electricity Cost Less Is it

Last Answer : electricity Fan Gently Or Loud Anyway Let's go No. Why Electricity Same Cost Is 3 Because Fan To walk Control Is Regulator Or Regulator Through And Electricity Cost The work Regulator Before The end ... More Power Eat Regulator The rest Eat Fan. So Turn around Back Electricity Cost The same Being 3

What is a brush less alternator?

Description : What is a brush less alternator?

Last Answer : A brushless alternator is composed of two sections: main alternator and the smaller exciter. The exciter has stationary field coils and a rotating armature (power coils). The main alternator ... has a rotating field as described above and a stationary armature (power generation windings).

In actual machines a.Mechanical advantage is unity b.Mechanical advantage is greater than velocity ratio c.Mechanical advantage is less than velocity ratio d.Mechanical advantage is less than unity e.Mechanical advantage is equal to velocity ratio

Description : In actual machines a.Mechanical advantage is unity b.Mechanical advantage is greater than velocity ratio c.Mechanical advantage is less than velocity ratio d.Mechanical advantage is less than unity e.Mechanical advantage is equal to velocity ratio

Last Answer : c. Mechanical advantage is less than velocity ratio

If the supply curve is a straight line passing through the origin, then the price elasticity of supply will be - (1) less than unity (2) infinitely large (3) greater than unity (4) equal to unity

Description : If the supply curve is a straight line passing through the origin, then the price elasticity of supply will be - (1) less than unity (2) infinitely large (3) greater than unity (4) equal to unity

Last Answer : (4) equal to unity Explanation: Any straight line supply curve passing through the origin has an elasticity of supply equal to 1. The different types of price elasticity of supply are listed below:

In vibration isolation system, if ω/ωn < 2, then for all values of damping factor, the transmissibility will be A less than unity B equal to unity C greater than unity D zero

Description : In vibration isolation system, if ω/ωn < 2, then for all values of damping factor, the transmissibility will be A less than unity B equal to unity C greater than unity D zero

Last Answer : C greater than unity

In vibration isolation system, the transmissibility will be equal to unity, for all values of damping factor, if ω/ωn is A. Equal to 1 B. Equal to √2 C. Less than √2 D. Greater than √2

Description : In vibration isolation system, the transmissibility will be equal to unity, for all values of damping factor, if ω/ωn is A. Equal to 1 B. Equal to √2 C. Less than √2 D. Greater than √2

Last Answer : B. Equal to √2

In vibration isolation system, if ω/ω n < 2, then for all values of damping factor, the transmissibility will be a) less than unity b) equal to unity c) greater than unity d) zero

Description : In vibration isolation system, if ω/ω n < 2, then for all values of damping factor, the transmissibility will be a) less than unity b) equal to unity c) greater than unity d) zero

Last Answer : c) greater than unity

In vibration isolation system, if ω/ω n < 2, then for all values of damping factor, the transmissibility will be a) less than unity b) equal to unity c) greater than unity d) zero

Description : In vibration isolation system, if ω/ω n < 2, then for all values of damping factor, the transmissibility will be a) less than unity b) equal to unity c) greater than unity d) zero

Last Answer : c) greater than unity

n vibration isolation system, if ω/ω n is less than √2 , then for all values of the damping factor, the transmissibility will be a) less than unity b) equal to unity c) greater than unity d) zero

Description : n vibration isolation system, if ω/ω n is less than √2 , then for all values of the damping factor, the transmissibility will be a) less than unity b) equal to unity c) greater than unity d) zero

Last Answer : c) greater than unity