Is there a webpage that defines current volt amp charge ohm and similar words in one page?

Is there a webpage that defines current volt amp charge ohm and similar words in one page?
by

1 Answer

Answer :

by

Related questions

The SI unit of charge is -----? A. Ampere B. Coulomb (Answer) C. Ohm D. Volt

Description : The SI unit of charge is -----? A. Ampere B. Coulomb (Answer) C. Ohm D. Volt

Last Answer : B. Coulomb (Answer)

When used for taking resistance measurements, a volt-ohm-milliammeter is normally powered by _____________. A. a hand cranked generator B. internal storage batteries C. the current in the circuit being tested D. a step down transformer

Description : When used for taking resistance measurements, a volt-ohm-milliammeter is normally powered by _____________. A. a hand cranked generator B. internal storage batteries C. the current in the circuit being tested D. a step down transformer

Last Answer : Answer: B

Low volt, High Amp current?

Description : Low volt, High Amp current?

Last Answer : Imagine a car battery. They are 12-15V and are capable of delivering 600 amps - when there is a conductor with very low resistance across the terminal. (Volts / current = resistance) so 12 volts/ 600 ... connect yourself to a car battery you will only get 12v/1,000,000 ohms = 12 microamps. Nothing.

What is the current through R2 of the circuit illustrated if the resistances of R1 is 2 ohms, R2 is 4 ohms, and R3 is 4 ohms with a 6 volt battery? EL-0021 A. 0.5 amp B. 1.5 amps C. 3.0 amps D. 6 amps

Description : What is the current through R2 of the circuit illustrated if the resistances of R1 is 2 ohms, R2 is 4 ohms, and R3 is 4 ohms with a 6 volt battery? EL-0021 A. 0.5 amp B. 1.5 amps C. 3.0 amps D. 6 amps

Last Answer : Answer: B

What is the total current in the illustrated circuit with a 6 volt battery if the resistance of R1 is 2 ohms, R2 is 4 ohms, and R3 is 4 ohms? EL-0021 A. 0.6 amp B. 1 amp C. 4 amps D. 6 amps

Description : What is the total current in the illustrated circuit with a 6 volt battery if the resistance of R1 is 2 ohms, R2 is 4 ohms, and R3 is 4 ohms? EL-0021 A. 0.6 amp B. 1 amp C. 4 amps D. 6 amps

Last Answer : Answer: D

A milli voltmeter of 25 milli volt range is to be converted into an ammeter of 25 ampere range. The value (in ohm) of necessary shunt will be

Description : A milli voltmeter of 25 milli volt range is to be converted into an ammeter of 25 ampere range. The value (in ohm) of necessary shunt will be

Last Answer : A milli voltmeter of 25 milli volt range is to be converted into an ammeter of 25 ampere range. The value (in ohm) ... 001` B. `0.01` C. 1 D. `0.05`

What is unit of Electrical Capacity? (1) henry (2) farad (3) volt (4) ohm

Description : What is unit of Electrical Capacity? (1) henry (2) farad (3) volt (4) ohm

Last Answer : (2) farad Explanation: Henry is unit of Magnetic Induction, volt is unit of Potential Difference, ohm is unit of Electric Resistance.

The unit of electrical resistance is the _____________. A. ampere B. volt C. watt D. ohm

Description : The unit of electrical resistance is the _____________. A. ampere B. volt C. watt D. ohm

Last Answer : Answer: D

A volt-ohm-millimeter can be used to check for ____________. A. continuity B. grounds C. voltage D. all of the above

Description : A volt-ohm-millimeter can be used to check for ____________. A. continuity B. grounds C. voltage D. all of the above

Last Answer : Answer: D

In the illustrated circuit 'A', what power is consumed by a 3 ohm resistor with a 12 volt source? EL-0041 A. 12 watts B. 48 watts C. 64 watts D. 232 watts

Description : In the illustrated circuit 'A', what power is consumed by a 3 ohm resistor with a 12 volt source? EL-0041 A. 12 watts B. 48 watts C. 64 watts D. 232 watts

Last Answer : Answer: B

Prior to taking a resistance reading with a volt-ohm-milliammeter, the 'zero' setting must be adjusted. After clipping the two leads together, you find the adjustment knob will not return the pointer to 'zero'. This is most likely an indication of ______ A. an improper resistance range setting B. weak batteries C. a faulty zero ohms knob D. a faulty meter movement

Description : Prior to taking a resistance reading with a volt-ohm-milliammeter, the 'zero' setting must be adjusted. After clipping the two leads together, you find the adjustment knob will not return the pointer ... range setting B. weak batteries C. a faulty zero ohms knob D. a faulty meter movement

Last Answer : Answer: B

When troubleshooting most electronic circuits, 'loading effect' can be minimized by using a voltmeter with a/an ___________________. A. input impedance much greater than the impedance across which the voltage is being measured B. input impedance much less than the impedance across which the voltage is being measured C. sensitivity of less than 1000 ohms/volt D. sensitivity of more than 1000 volts/ohm

Description : When troubleshooting most electronic circuits, 'loading effect' can be minimized by using a voltmeter with a/an ___________________. A. input impedance much greater than the impedance across which the voltage ... sensitivity of less than 1000 ohms/volt D. sensitivity of more than 1000 volts/ohm

Last Answer : Answer: A

Which quantity do the following units measure: (i) Volt (ii) Coulomb (iii) Walt (iv) Ohm (v) Mho (vi) Ampere (vii) Dyne (viii) Celsius (ix) Joule (x) Calorie

Description : Which quantity do the following units measure: (i) Volt (ii) Coulomb (iii) Walt (iv) Ohm (v) Mho (vi) Ampere (vii) Dyne (viii) Celsius (ix) Joule (x) Calorie

Last Answer : Answers: (i) Voltage (ii) Charge of Electricity (iii) Power (iv) Resistance (v) Conductivity (vi) Current (vii) Force (viii) Temperature (ix) Energy (x) Heat

The unit of inductance is: a. Volt b. Ampere c. Henry d. Ohm

Description : The unit of inductance is: a. Volt b. Ampere c. Henry d. Ohm

Last Answer : c. Henry

I have a 4 ohm bass guitar amplier. So I can only run one 4ohm speaker cabinet and not 2 correct? If I tried to use a 4ohm cabinet with a 8ohm cabinet with the 4 ohm amp would that still work or would the ohms become less than 4?

Description : I have a 4 ohm bass guitar amplier. So I can only run one 4ohm speaker cabinet and not 2 correct? If I tried to use a 4ohm cabinet with a 8ohm cabinet with the 4 ohm amp would that still work or would the ohms become less than 4?

Last Answer : From what I remember you can drive 8 ohms with a 4 ohm amp, but not the reverse.

What is the amp draw for a 3800 watt 240 volt water heater?

Description : What is the amp draw for a 3800 watt 240 volt water heater?

Last Answer : What is the answer ?

I would love my webpage to show up on google searches when using a certain keyword (not in the advertisement space), but i also don't want to change anything visible on the page. is there anything i can do?

Description : I would love my webpage to show up on google searches when using a certain keyword (not in the advertisement space), but i also don't want to change anything visible on the page. is there anything i can do?

Last Answer : meta tags, give this a read: http://www.google.com/support/webmasters/bin/answer.py?hl=en&answer=79812

Which component of web 2.0 allow reloading a part of webpage without reloading the whole page a)Folksonomy b) Ajax c)Mash up d) RSS generated Syndication

Description : Which component of web 2.0 allow reloading a part of webpage without reloading the whole page a)Folksonomy b) Ajax c)Mash up d) RSS generated Syndication

Last Answer : Ajax

A current of 6 amperes flows through a 2 ohm resistor for 30 seconds. How many coulombs of charge have passed through the resistor?

Description : A current of 6 amperes flows through a 2 ohm resistor for 30 seconds. How many coulombs of charge have passed through the resistor? 

Last Answer : ANSWER: 180 COULOMBS

When charging a 100 amp-hour lead-acid battery, ___________. A. the temperature of the electrolyte should not be allowed to exceed 90°F B. the charging rate should be no greater than 125% of the battery amp-hour rating C. the source of power for charging should be 2.5 volts per cell D. gassing within the battery decreases when nearing full charge and it will be necessary to reduce the charging current to a low finishing rate

Description : When charging a 100 amp-hour lead-acid battery, ___________. A. the temperature of the electrolyte should not be allowed to exceed 90°F B. the charging rate should be no greater than 125% of the ... nearing full charge and it will be necessary to reduce the charging current to a low finishing rate

Last Answer : Answer: C

How do you do that thing where the words you type are the link to a webpage?

Description : How do you do that thing where the words you type are the link to a webpage?

Last Answer : Follow the formatting as given under the response box under “Style your text” for “link.”

Why does the Chevy Volt only travel 40 miles on a full charge, while as early as 1999, GM had the EV-1, which could travel up to 140 miles between charges?

Description : Why does the Chevy Volt only travel 40 miles on a full charge, while as early as 1999, GM had the EV-1, which could travel up to 140 miles between charges?

Last Answer : Possibly, but I think it depends on how you look at it. The technology exists to have an electric vehicle that will go for 140 Miles or more on a single charge, but would it be ... miles and that the gasoline engine can run at a constant RPM allowing for much more efficient fuel consumption

Can you charge 12 volt batteries in parallel?

Description : Can you charge 12 volt batteries in parallel?

Last Answer : Need answer

When the potential difference of 4 volt is applied across resistance, 10J energy is converted. Find the charge flows. a. 0.20 C b. 2.5C c. 5C d. 10C

Description : When the potential difference of 4 volt is applied across resistance, 10J energy is converted. Find the charge flows. a. 0.20 C b. 2.5C c. 5C d. 10C

Last Answer : b. 2.5C

The SI unit of charge is: (a) Meter (b) Ampere (c) Coulomb (d) Volt

Description : The SI unit of charge is: (a) Meter (b) Ampere (c) Coulomb (d) Volt

Last Answer : (c) Coulomb

A 10 volt battery connected to a capacitor delivers a charge of 0.5 coulombs. The capacitance of the capacitor is: w) 2 x 10-2 farads x) 5 x 10-2 farads y) 2 farads z) 5 farads

Description : A 10 volt battery connected to a capacitor delivers a charge of 0.5 coulombs. The capacitance of the capacitor is: w) 2 x 10-2 farads x) 5 x 10-2 farads y) 2 farads z) 5 farads

Last Answer : ANSWER: X -- 5 x 10-2 FARADS

The field intensity of a charge defines the impact of the charge on a test charge placed at a distance. It is maximum at d = 0cm and minimises as d increases. State True/False a) True b) False

Description : The field intensity of a charge defines the impact of the charge on a test charge placed at a distance. It is maximum at d = 0cm and minimises as d increases. State True/False a) True b) False

Last Answer : a) True

When choosing a battery for a particular application, major consideration should be given to the battery's ____________. A. amp-hour capacity B. terminal polarity C. stability under charge D. ambient temperature rise

Description : When choosing a battery for a particular application, major consideration should be given to the battery's ____________. A. amp-hour capacity B. terminal polarity C. stability under charge D. ambient temperature rise

Last Answer : Answer: A

What is the current source of Ohm ?

Description : What is the current source of Ohm ?

Last Answer : : The current flowing through a conductor at a fine temperature is proportional to the voltage of the conductor. I = where , I = current , V = voltage R = resistance

24 cells of emf `1.5 V` each having internal resistance of 1 ohm are connected to an external resistance of `1.5` ohms. To get maximum current,

Description : 24 cells of emf `1.5 V` each having internal resistance of 1 ohm are connected to an external resistance of `1.5` ohms. To get maximum current,

Last Answer : 24 cells of emf `1.5 V` each having internal resistance of 1 ohm are connected to an external ... in series and 4 such rows are connected in parallel

In the given circuit, the resistances are given in ohm. The current through the `10Omega` resistance is 3 A while that through the resistance X is 1 A

Description : In the given circuit, the resistances are given in ohm. The current through the `10Omega` resistance is 3 A while that through the resistance X is 1 A

Last Answer : In the given circuit, the resistances are given in ohm. The current through the `10Omega` resistance is 3 A while ... and 6 C. 6 and 12 D. 6 and 6

The device used ' for the measurement of current, voltage and resistance is: A. AVO meter B. Galvanometer C. Ammeter D. Ohm meter

Description : The device used ' for the measurement of current, voltage and resistance is: A. AVO meter B. Galvanometer C. Ammeter D. Ohm meter

Last Answer : ANSWER: A

Instruments of Measure The device used ' for the measurement of current, voltage and resistance is: A. AVO meter B. Galvanometer C. Ammeter D. Ohm meter

Description : Instruments of Measure The device used ' for the measurement of current, voltage and resistance is: A. AVO meter B. Galvanometer C. Ammeter D. Ohm meter

Last Answer : ANSWER: A

The device used ' for the measurement of current, voltage and resistance is: A. AVO meter B. Galvanometer C. Ammeter D. Ohm meter

Description : The device used ' for the measurement of current, voltage and resistance is: A. AVO meter B. Galvanometer C. Ammeter D. Ohm meter

Last Answer : ANSWER: A

The device used ' for the measurement of current, voltage and resistance is: A. AVO meter B. Galvanometer C. Ammeter D. Ohm meter

Description : The device used ' for the measurement of current, voltage and resistance is: A. AVO meter B. Galvanometer C. Ammeter D. Ohm meter

Last Answer : ANSWER: A

Find the current in a conductor with resistance 2 ohm, electric field 2 units and distance 100cm. a) 1A b) 10mA c) 10A d) 100mA

Description : Find the current in a conductor with resistance 2 ohm, electric field 2 units and distance 100cm. a) 1A b) 10mA c) 10A d) 100mA

Last Answer : a) 1A

What is the power used in a circuit that has 10 amperes of current through a 10-ohm resistor?

Description : What is the power used in a circuit that has 10 amperes of current through a 10-ohm resistor?

Last Answer : 1 kilowatt.

An ammeter with an internal resistance of 50 ohm(s) is used to measure a current thorugh a lod resistor Rl = 1 kohm(s). Determine the percentage error of the reading due to ammeter insertion.

Description : An ammeter with an internal resistance of 50 ohm(s) is used to measure a current thorugh a lod resistor Rl = 1 kohm(s). Determine the percentage error of the reading due to ammeter insertion.

Last Answer : 50/(50+1k)*100 = 4.76%

A galvanometer with 20 ohms coil resistence has a full-scale deflection of 10 mA. A 0.02 ohm is placed across the meter to increase its rating capacity. What is the new full scale current for the meter?

Description : A galvanometer with 20 ohms coil resistence has a full-scale deflection of 10 mA. A 0.02 ohm is placed across the meter to increase its rating capacity. What is the new full scale current for the meter?

Last Answer : False.

at the terminal of a three-phase 6.6Kv alternator a load R=200 ohm is connected between two-phase and the third phase is opened. Z1=z2=5 ohm Zo=2 find out the fault current .

Description : at the terminal of a three-phase 6.6Kv alternator a load R=200 ohm is connected between two-phase and the third phase is opened. Z1=z2=5 ohm Zo=2 find out the fault current .

Last Answer : 32A

Electric current produces magnetic field was suggested by: a. Faraday b. Lenz c. Ohm d. Oerested

Description : Electric current produces magnetic field was suggested by: a. Faraday b. Lenz c. Ohm d. Oerested

Last Answer : c. Ohm

A current of 5 amps passes through a 10 ohm resistor. What power is dissipated by this resistor under these conditions?

Description : A current of 5 amps passes through a 10 ohm resistor. What power is dissipated by this resistor under these conditions?

Last Answer : ANSWER: 250 WATTS

The potential difference across a 4 ohm resistor is 20 volts. What is the current in the resistor?

Description : The potential difference across a 4 ohm resistor is 20 volts. What is the current in the resistor?

Last Answer : ANSWER: 5 AMPS

A series circuit consists of a two ohm RESISTOR and a one ohm INDUCTOR. The relationship between current and voltage is: w) current will lag by 30 degrees. x) current will lag by 26 degrees. y) current will lead by 26 degrees. z) current will lead by 30 degrees.

Description : A series circuit consists of a two ohm RESISTOR and a one ohm INDUCTOR. The relationship between current and voltage is: w) current will lag by 30 degrees. x) current will lag by 26 degrees. y) current will lead by 26 degrees. z) current will lead by 30 degrees.

Last Answer : ANSWER: X -- CURRENT WILL LAG BY 26 DEGREES.

A 10 ohm and a 20 ohm resistor are connected in parallel to a current source. What fraction of the current flows through the 20 ohm resistor? w) 1/2 x) 1/3 y) 2/3 z) 3/4

Description : A 10 ohm and a 20 ohm resistor are connected in parallel to a current source. What fraction of the current flows through the 20 ohm resistor? w) 1/2 x) 1/3 y) 2/3 z) 3/4

Last Answer : ANSWER: X -- 1/3

A 20 ohm resistor and a 60 ohm resistor are connected in parallel to a voltage source. If the current in the 60 ohm resistor is one ampere, the current in the 20 ohm resistor will be: w) 1/3 ampere x) 2/3 ampere y) 1 ampere z) 3 amperes

Description : A 20 ohm resistor and a 60 ohm resistor are connected in parallel to a voltage source. If the current in the 60 ohm resistor is one ampere, the current in the 20 ohm resistor will be: w) 1/3 ampere x) 2/3 ampere y) 1 ampere z) 3 amperes

Last Answer : ANSWER: Z -- 3 AMPERES

A current of 5 amps passes through a 10 ohm resistor. How many joules of energy will be generated by this resistor in 2 seconds?

Description : A current of 5 amps passes through a 10 ohm resistor. How many joules of energy will be generated by this resistor in 2 seconds? 

Last Answer : ANSWER: 500 JOULES

A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed

Description : A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed 

Last Answer : For RC series circuit

A three-phase synchronous motor has a terminal voltage of 460 V and a terminal current of 120 A at a power factor of 0.95 lagging, synchronous reactance of 1.68 ohm and the field current is 47 A. The field to armature mutual inductance of the synchronous motor is _____________.

Description : A three-phase synchronous motor has a terminal voltage of 460 V and a terminal current of 120 A at a power factor of 0.95 lagging, synchronous reactance of 1.68 ohm and the field current is 47 A. The field to armature mutual ... _____________.      (a). 20mH   (b). 16mH   (c). 24mH   (d). 22mH

Last Answer : 22

If the 12 Ohm resistor draws a current of 1 A as shown in the figure, the value of resistance R is

Description : If the 12 Ohm resistor draws a current of 1 A as shown in the figure, the value of resistance R is

Last Answer : If the 12 Ohm resistor draws a current of 1 A as shown in the figure, the value of resistance R is