What is the amp draw for a 3800 watt 240 volt water heater?

1 Answer

Answer :

What is the answer ?

Related questions

Description : How much current does a 1500 Watt heater draw if supplied with a 120 Volt source?

Last Answer : ANSWER: 12.5 AMPS

Description : Which of the following statements is true if a 100 watt lamp and a 75 watt lamp are connected in parallel across a 100 volt power supply? A. The 75 watt lamp will draw as much current as the 100 ... Current flow will be the same across each lamp. D. The 75 watt lamp will have a higher resistance.

Last Answer : Answer: D

Description : Which of the following is not a unit of energy? a.Joule b.kW c.N-m d.Electron volt e.Watt-hour

Last Answer : b. kW

Description : If voltage across a bulb rated 220 volt-100 watt drops by `2.5 %` of its value, the percentage of the rated value by which the power would decrease is

Last Answer : If voltage across a bulb rated 220 volt-100 watt drops by `2.5 %` of its value, the percentage of the rated value ... 20%` B. `2.5%` C. `5%` D. `10%`

Description : What wire size needed for 120 volt 3000 watt load?

Last Answer : AWG # 10 wire on 30 amp circuit.

Description : Two 100 watt light bulbs are connected in parallel across a 100 volt power supply. The total power developed in the circuit is _______________. A. 200 watts B. 100 watts C. 50 watts D. equal to the product of the amperes times the voltage in each branch

Last Answer : Answer: A

Description : What current is required to light two 75 watt lamps and one 40 watt lamp when connected in series to a 120 volt power source? A. 0.161 amperes B. 0.631 amperes C. 1.583 amperes D. 6.199 amperes

Last Answer : Answer: C

Description : The unit of electrical resistance is the _____________. A. ampere B. volt C. watt D. ohm

Last Answer : Answer: D

Description : Electric current is the flow of electrons through a conductor. The rate of this flow is measured as ___________. A. volts/watt B. amperes/centimetre C. coulombs/second D. ohms/volt

Last Answer : Answer: C

Description : Name the quantities which are measured by the following units. (i) Newton (ii) Joule (iii) Watt (iv) Volt (v) Light year (vi) Angstrom (vii) Acre-foot (viii) Becquerel (ix) Hertz (x) Cusec

Last Answer : Answers: (i) Force (ii) Work Energy (iii) Power of electricity (iv) Potential difference (v) Distance of stars and planets (vi) Length (vii) Volume (viii) Radioactivity (ix) Frequency (x) Rate of flow of water

Description : What is the unit of responsitivity? ∙ a. Ampere/volt ∙ b. Ampere/watt ∙ c. Watt/ampere ∙ d. Volts/ampere

Last Answer : ∙ a. Ampere/volt

Description : Used normally, a 150-watt, 120 volt light bulb requires how many amps of current?

Last Answer : ANSWER: 1.25 AMPS 

Description : Two 220 volt lamps, one of 60 watt and the other of 75 watt are connected in series across a 440 volt supply. The potential difference across 60 watt lamp will be: A) 195 volt B) 220 volt C) 245 volt D) 440 volt

Last Answer : Two 220 volt lamps, one of 60 watt and the other of 75 watt are connected in series across a 440 volt supply. The potential difference across 60 watt lamp will be: 245 volt

Last Answer : Difference between watt and volt and ampere is as follows: Watt Volt Ampere Watt is the unit of power. Volt is the unit of voltage. Ampere is the unit of current. Watts= Volts x Amperes Volts= Watts/ ...

Description : What is 240 volt 3 phase?

Last Answer : A type of electrical supply.

Description : If there is a reduction in the normally supplied frequency to a 120/240 volt, threephase AC current motor from 60 hertz to 55 hertz, the motor would _____________. A. run at a slower speed B. operate at a lower current C. overheat D. trip off the line

Last Answer : Answer: A

Description : How many 1500 watt heaters can you run on a 20 amp circuit?

Last Answer : As you did not specify the voltage of the circuit, I will I will assume your heaters are 110 volt portable heaters not 220 volt baseboard heaters.Each heater will draw 1500 watts / 110 volts = 13.64 ... more than half of the 20 ampere rating of the circuit, you can only run one of these heater.

Description : Is a 1000 watt amp too loud for installing in a car?

Last Answer : That may depend on the car you are instlling it in. But unless you have a very small sedan you will not have any problem with installing all that power inside your car

Description : What car speakers will go the best with my 500 watt amp?

Last Answer : All car speakers will go well with a 500 Watt amp, but for the best effect, get a power subwoofer.

Description : How many hours will a 200 amp hour battery last at 168 watt?

Last Answer : If it is a car battery (as given in the category) it is reasonably safe to assume that under load it is about 12V. I = P/E = 168W / 12V = 14A T = 200AH / 14A = 14.29H However ... battery. This is also assuming that the car battery is not being charged at any time while the load is present.

Description : For a light detector, responsivity is measured in: a. amps per watt b. µW per amp c. mA per joule d. µsec per µW

Last Answer : a. amps per watt

Description : Low volt, High Amp current?

Last Answer : Imagine a car battery. They are 12-15V and are capable of delivering 600 amps - when there is a conductor with very low resistance across the terminal. (Volts / current = resistance) so 12 volts/ 600 ... connect yourself to a car battery you will only get 12v/1,000,000 ohms = 12 microamps. Nothing.

Description : Is there a webpage that defines current volt amp charge ohm and similar words in one page?

Last Answer : http://www.powermate.com/generators/glossary.php and http://www.engelectric.com/lit/lit6glossary.htm look promising

Description : What is the current through R2 of the circuit illustrated if the resistances of R1 is 2 ohms, R2 is 4 ohms, and R3 is 4 ohms with a 6 volt battery? EL-0021 A. 0.5 amp B. 1.5 amps C. 3.0 amps D. 6 amps

Last Answer : Answer: B

Description : What is the total current in the illustrated circuit with a 6 volt battery if the resistance of R1 is 2 ohms, R2 is 4 ohms, and R3 is 4 ohms? EL-0021 A. 0.6 amp B. 1 amp C. 4 amps D. 6 amps

Last Answer : Answer: D

Description : What wire gauge and amperage for a 1600 watt wall heater?

Last Answer : 1600 watts is unusually low for electric baseboard heaters! These usually are rated at about 6000 watts.Typical electric baseboard heaters operate on 220 volts thus you heater would pull about 7.3 ... handle this.A standard 6000 watt baseboard heater pulls about 27 amperes and needs 10 gauge wire.

Description : How many amps does a 1500 watt heater need?

Last Answer : Feel Free to Answer

Description : How much will your electric bill go up using a 350 watt heater?

Last Answer : Feel Free to Answer

Description : A 1000 watts heater is connected to a 240 V AC Supply. Then the current drawn by the heater is

Last Answer : A 1000 watts heater is connected to a 240 V AC Supply. Then the current drawn by the heater is 4.166 amperes

Description : So, is my 3800+ processor 3.8ghz or not?

Last Answer : answer:3800 is just the model number. Unrelated to speed. Intel i7 processors do not run at i7 MHz. The old nvidia 8800 graphics cards don't run at 8.8 ghz, nor do they have 8.8 gigs of VRAM.. My ... the 3800 line, see the AMD website listing. It looks like most of them run between 2 and 2.4 GHz.

Description : The enthalpy of combustion of `H_(2)` , cyclohexene `(C_(6)H_(10))` and cyclohexane `(C_(6)H_(12))` are `-241` , `-3800` and `-3920KJ` per mol respect

Last Answer : The enthalpy of combustion of `H_(2)` , cyclohexene `(C_(6)H_(10))` and cyclohexane `(C_(6)H_(12))` are `-241 ... "KJ mol"^(-1)` D. `242 "KJ mol^(-1)`

Description : What 3800 as a product of its prime factors using exponents?

Last Answer : It is: 2^3 times 5^2 times 19^1 = 3800

Description : 5 atm = ____mmHg  a. 8300  b. 3800  c. 3080  d. None of the above

Last Answer : 3800

Description : A heater takes 4 Amp at 250 volts. How much power does it consume? A. 1 KWatt B. 2 KWatt C. 3 KWatt D. 4 KWatt 

Last Answer : Power= voltage* current             = 4 * 250             = 1000 watts             = 1KW

Description : How much resistance is needed to draw 17.6 mA from a 12 volt source? A.212 ohms B.6.8 kohms C.68 ohms D.680 ohms

Last Answer : How much resistance is needed to draw 17.6 mA from a 12 volt source? A.212 ohms B.6.8 kohms C.68 ohms D.680 ohms

Description : Is Amp Draw Of The Compressor Something I Need To Be Concerned With?

Last Answer : Yes, the lower the amp draw, the better the compressor is. As a rule of thumb, the maximum amperage that a compressor should require is 30amps.

Description : Draw pin diagram of Op-Amp IC-741.

Last Answer : Pin diagram of Op-Amp IC-741 :

Description : Draw and explain the Op-amp based subtractor

Last Answer : Working The subtractor circuit is a basic op-amp circuit whose output voltage is the difference between two input voltages.  In the above circuit, the two input voltages are V1 and V2.  The op amp is used ... When differential gain is 1, ie Rf = R,  the output voltage is Vo = (V2 - V1).

Description : Draw the diagram of zero crossing detector using op-amp and explain its working.

Last Answer : The zero crossing detector circuit is an important application of the op-amp comparator circuit. It can also be called as the sine to square wave converter. Anyone of the inverting or non-inverting ... the possibility of any false zero crossing due to noise voltages at the op-amp input.

Description : How many amps will a 230 vac 3500 watts heater draw?

Last Answer : Since power = voltage * currentwe have current=power/voltage so 3500 watts/230 volts = about15.218 amperes in a heater using a resistance to generate heat.This should be valid even though the "230 vac" indicates that it isan AC circuit and not a DC circuit.

Description : _________ is the quantity of heat required to raise the temperature of one pound of water 1 F˚ from 63 ˚F to 64 ˚F.  a. one Joule  b. one calorie  c. one watt  d. one BTU

Last Answer : one BTU

Description : How much area could be covered for giving one irrigation of 3" depth by a pumpset of one cusec output in the operation of 600 hours, if the water conveyance efficiency is 80 per cent ? (A) 180 acres (B) 320 acres (C) 240 acres (D) 160 acres (E) None of these

Last Answer : (C) 240 acres

Description : Can you damage your eyes if you look directly at a lit 100 watt bulb?

Last Answer : It all depends on how far away you are, and how much ambient light there is already, But no, even holding your face eight inches away in a dark room won’t do any significant damage. Your pupils will contract so no damage is done.

Description : Can I replace a 60 watt incandescent light bulb with a fluorescent or LED bulb that puts out more light than the incandescent?

Last Answer : Light output is measured in lumens, and yes, you can find a fluorescent bulb in lumen output equal to or greater than an incandescent 75 or 100 watt bulb.And it won’t be anywhere near 60 watts, so you are safe.

Description : Would you have use for candelabra bulbs that were energy saving (CFL or LED), yet produced 75+ watt light equivalent?

Last Answer : answer:No, because I ate my vegetables when I was a kid and don't have a Daylight only restriction on my drivers license. Seriously though, like many people, my home lighting is 40W-equivalent for ... the lower wattage bulbs are plenty bright enough for most people. TL:DR - it's lack of demand.

Description : Realistically, what can a 45 watt solar panel system be used for?

Last Answer : answer:More than I thought… youtube

Description : Can I put a 26 Watt energy saver (Equivalent to 100W) in a 60 Watt max lamp?

Last Answer : yes. It’s equivalent in how much light it gives off compared to a 100W incandescent bulb. Those get much hotter.

Description : How many 64 watt Solar Panels do I need?

Last Answer : That’s 207,000 W-h per month, or ~6800 W-h per day. Assume 10 hr of sunshine per day, so you will need 11 panels at 64 W each.

Description : Will a 110 watt receiver power 120 watt speakers?

Last Answer : Yes. Here’s how to think of it—it’s not that 120 watt speakers draw 120 watts, it’s that they can handle up to 120 watts.

Description : I have a 60 watt/120v clip-on lamp. What is the highest wattage of compact fluorescent bulb can I safely use in this lamp?

Last Answer : By the way, I mean actual watts on the fluorescent bulb, not replacement-watts. :)