What statement is false: A. Not to survey when making the crown

What statement is false:
A. Not to survey when making the crown
by

1 Answer

Answer :

A. Not to survey when making the crown
by

Related questions

A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown can BEST be achieved by: A. Hand burnishing B. Mechanical burnishing C. Using finishing burs and points to remove the enamel margins on the tooth D. Making a new impression and remaking the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Description : A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown ... the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Last Answer : D. Making a new impression and remaking the crown

In the construction of a full veneer gold crown, future recession of gingival tissue can be prevented or at least minimised by, A. Extension of the crown 1 mm under the gingival crevice B. Reproduction of normal tooth incline in the gingival one third of the crown C. Slight over contouring of the tooth in the gingival one fifth of the crown D. Slight under contouring of the tooth in the gingival one fifth of the crown

Description : In the construction of a full veneer gold crown, future recession of gingival tissue can be prevented or at least minimised by, A. Extension of the crown 1 mm under the gingival crevice B. ... of the crown D. Slight under contouring of the tooth in the gingival one fifth of the crown

Last Answer : B. Reproduction of normal tooth incline in the gingival one third of the crown

The ideal length of core in the fabrication of crown and core of endodontically treated tooth is, A. 1.5 of crown length B. The length of the crown C. 2/3 tooth/root length D. ½ root length

Description : The ideal length of core in the fabrication of crown and core of endodontically treated tooth is, A. 1.5 of crown length B. The length of the crown C. 2/3 tooth/root length D. ½ root length

Last Answer : C. 2/3 tooth/root length

“Pop off” of a porcelain veneer from the under the lying gold crown is due to:** A. Too thick application of pure gold surface conditioner B. Contamination at the porcelain metal interface C. Under firing the opaque layer D. All of the above

Description : “Pop off” of a porcelain veneer from the under the lying gold crown is due to:** A. Too thick application of pure gold surface conditioner B. Contamination at the porcelain metal interface C. Under firing the opaque layer D. All of the above

Last Answer : B. Contamination at the porcelain metal interface

When should metallic framework not be contaminated during the fabrication of a porcelain fused to metal crown: A. Between bisque stage and glazing stage B. Between preheat and opaque stages C. Between opaque and bisque stages D. Between one opaque and two opaque stages

Description : When should metallic framework not be contaminated during the fabrication of a porcelain fused to metal crown: A. Between bisque stage and glazing stage B. Between preheat and opaque stages C. Between opaque and bisque stages D. Between one opaque and two opaque stages

Last Answer : B. Between preheat and opaque stages

A vital tooth has a crown cemented to a pin-retained amalgam core; where does a failure occur: A. Between crown and cement B. Between core and cement C. In the crown and the root D. In the core and the margin preparation

Description : A vital tooth has a crown cemented to a pin-retained amalgam core; where does a failure occur: A. Between crown and cement B. Between core and cement C. In the crown and the root D. In the core and the margin preparation

Last Answer : B. Between core and cement

The OPTIMUM crown to root ratio for abutment tooth is:** A. 2:3 B. 1:1

Description : The OPTIMUM crown to root ratio for abutment tooth is:** A. 2:3 B. 1:1

Last Answer : A. 2:3

A cast crown fits on the die but not on the tooth, the discrepancy is about 0.3mm, what would you do: A. Relieve cast from the inside B. Take a new impression and make new crown C. Burnish margins D. Use thick mix of cement

Description : A cast crown fits on the die but not on the tooth, the discrepancy is about 0.3mm, what would you do: A. Relieve cast from the inside B. Take a new impression and make new crown C. Burnish margins D. Use thick mix of cement

Last Answer : B. Take a new impression and make new crown

The cervical finish line of a full veneer crown preparation should be placed: A. Just supragingival whenever is possible B. According to the depth of gingival crevice C. Subgingival to reduce ability of recurrent caries D. At the junction of tooth and amalgam core

Description : The cervical finish line of a full veneer crown preparation should be placed: A. Just supragingival whenever is possible B. According to the depth of gingival crevice C. Subgingival to reduce ability of recurrent caries D. At the junction of tooth and amalgam core

Last Answer : A. Just supragingival whenever is possible

A 8 years-old patient has 3 first premolars erupted and a swelling on the ridge of the un-erupted premolar. X ray shows a fully developed crown and ¾ roots development with no other pathology. What is your management: A. Remove the dentigerous cyst B. Soft tissues recision to allow eruption C. Soft tissues recision accompanied with orthodontic appliance to help with eruption

Description : A 8 years-old patient has 3 first premolars erupted and a swelling on the ridge of the un-erupted premolar. X ray shows a fully developed crown and ¾ roots development with no ... recision to allow eruption C. Soft tissues recision accompanied with orthodontic appliance to help with eruption

Last Answer : C. Soft tissues recision accompanied with orthodontic appliance to help with eruption

In regard to apically displaced flap, what is TRUE: A. Does not preserve attached gingivae B. Does not lengthen crown of tooth C. Is a pocket elimination procedure D. A & C

Description : In regard to apically displaced flap, what is TRUE: A. Does not preserve attached gingivae B. Does not lengthen crown of tooth C. Is a pocket elimination procedure D. A & C

Last Answer : C. Is a pocket elimination procedure

Odontogenic cysts develop from the following structures except: A. Reduced enamel epithelium of tooth crown B. Dental lamina dura C. Epithelium trapped after sutures D. ertwig’s root sheath

Description : Odontogenic cysts develop from the following structures except: A. Reduced enamel epithelium of tooth crown B. Dental lamina dura C. Epithelium trapped after sutures D. ertwig’s root sheath

Last Answer : C. Epithelium trapped after sutures

When you try to seat a crown on a tooth you find a discrepancy of 0.3mm at the margin; you will: A. Reduce inner surface of crown B. Remake a new crown C. Smooth the enamel at the margin D. Hand burnish crown margins

Description : When you try to seat a crown on a tooth you find a discrepancy of 0.3mm at the margin; you will: A. Reduce inner surface of crown B. Remake a new crown C. Smooth the enamel at the margin D. Hand burnish crown margins

Last Answer : B. Remake a new crown

What is the ideal length for a post in post-core in an endodontically treated tooth: A. 2/3 of the tooth length B. ½ of the tooth length C. 1.5 times that of the crown D. Same as the anticipated crown

Description : What is the ideal length for a post in post-core in an endodontically treated tooth: A. 2/3 of the tooth length B. ½ of the tooth length C. 1.5 times that of the crown D. Same as the anticipated crown

Last Answer : A. 2/3 of the tooth length

A labially displaced anterior tooth is restored with a gold core porcelain jacket crown so that it is in line with the arch; the crown will appears: A. Short B. Long C. Narrow D. Wide

Description : A labially displaced anterior tooth is restored with a gold core porcelain jacket crown so that it is in line with the arch; the crown will appears: A. Short B. Long C. Narrow D. Wide

Last Answer : C. Narrow

The major cause of jacket crown breakage is, A. Inclusion of platinum foil B. Use of weak cementum C. Voids of porcelain D. Porcelain is thinner than 1mm

Description : The major cause of jacket crown breakage is, A. Inclusion of platinum foil B. Use of weak cementum C. Voids of porcelain D. Porcelain is thinner than 1mm

Last Answer : D. Porcelain is thinner than 1mm

Which one of the following is the major disadvantage of stone dies used for crown fabrication, A. They lack accurate reproduction of surface details B. Their overall dimensions are slightly smaller than the original impression C. The strength of the stone D. The hazard of aspiration of toxic materials during trimming of the dies.

Description : Which one of the following is the major disadvantage of stone dies used for crown fabrication, A. They lack accurate reproduction of surface details B. Their overall dimensions are slightly smaller than ... of the stone D. The hazard of aspiration of toxic materials during trimming of the dies.

Last Answer : A. They lack accurate reproduction of surface details

In bridge work, which of the followings terms is NOT CORRECT: A. A retainer could be a crown to which a bridge is attached to B. A connector connects a pontic to a retainer or two retainers to each other C. The saddle is the area of the edentulous ridge over which the pontic will lie and comes in contact with pontic D. A pontic is an artificial tooth as part of a bridge

Description : In bridge work, which of the followings terms is NOT CORRECT: A. A retainer could be a crown to which a bridge is attached to B. A connector connects a pontic to a retainer or two retainers to each ... lie and comes in contact with pontic D. A pontic is an artificial tooth as part of a bridge

Last Answer : C. The saddle is the area of the edentulous ridge over which the pontic will lie and comes in contact with pontic

The minimal labial tooth reduction for satisfactory aesthetics with porcelain fused to metal crown is, A. 1mm B. The full thickness of enamel C. 1.5 mm D. 2.5mm E. One third of the dentine thickness

Description : The minimal labial tooth reduction for satisfactory aesthetics with porcelain fused to metal crown is, A. 1mm B. The full thickness of enamel C. 1.5 mm D. 2.5mm E. One third of the dentine thickness

Last Answer : C. 1.5 mm

An impression with elastomer in custom tray has been taken for crown preparation; it will be two days before the impression gets to the laboratory for construction of the crown. Which impression material is preferred? A. Polyether B. Thiokol or meraptan rubber C. Condensation silicone D. Vinyl polysiloxane

Description : An impression with elastomer in custom tray has been taken for crown preparation; it will be two days before the impression gets to the laboratory for construction of the crown. Which impression ... A. Polyether B. Thiokol or meraptan rubber C. Condensation silicone D. Vinyl polysiloxane

Last Answer : D. Vinyl polysiloxane

.Lateral canals are usually found at: A. The middle of the root B. First third of the root close to the crown C. The apical third

Description : .Lateral canals are usually found at: A. The middle of the root B. First third of the root close to the crown C. The apical third

Last Answer : C. The apical third

.When correction preparation for re contouring of occlusal surface is to be applied, grinding only of the adjusted surface: A. Should not be felt flat B. Requires a flat crown C. Requires no contact with adjacent teeth D. Should be felt flat

Description : .When correction preparation for re contouring of occlusal surface is to be applied, grinding only of the adjusted surface: A. Should not be felt flat B. Requires a flat crown C. Requires no contact with adjacent teeth D. Should be felt flat

Last Answer : A. Should not be felt flat

Which is the more retentive form for an anterior bridge A. ¾ partial veneer crown B. Class V inlay C. Pinlay Veneer D. Class III inlay with pins

Description : Which is the more retentive form for an anterior bridge A. ¾ partial veneer crown B. Class V inlay C. Pinlay Veneer D. Class III inlay with pins

Last Answer : A. ¾ partial veneer crown

When primary molars are prepared for stainless steel crowns, should the depth for reduction of the proximal surface be similar to the depth of the buccal and lingual surfaces? A. Yes; reduction of all wall is similar for best retention B. No, proximal reduction is greater to allow the crown to pass the contact area C. No, the buccal surfaces has the greatest reduction to remove the cervical bulge D. Yes, all undercuts are uniformly removed so that the steel crown can be seated E. No, because of lateral constriction, the lingual surface needs greatest reduction

Description : When primary molars are prepared for stainless steel crowns, should the depth for reduction of the proximal surface be similar to the depth of the buccal and lingual surfaces? A. Yes; reduction ... can be seated E. No, because of lateral constriction, the lingual surface needs greatest reduction

Last Answer : B. No, proximal reduction is greater to allow the crown to pass the contact area

An occlusal approaching clasp TIP, A. Should occupy a predetermined undercut B. Contact the tooth under the survey line C. Rigid

Description : An occlusal approaching clasp TIP, A. Should occupy a predetermined undercut B. Contact the tooth under the survey line C. Rigid

Last Answer : B. Contact the tooth under the survey line

How much undercut area should a clasp arm engage:** A. As much undercut as possible B. Anywhere beyond the survey line C. A predetermined amount of undercut

Description : How much undercut area should a clasp arm engage:** A. As much undercut as possible B. Anywhere beyond the survey line C. A predetermined amount of undercut

Last Answer : C. A predetermined amount of undercut

Full mouth x ray survey at birth reveals: A. Ten teeth are present B. Twenty teeth are present C. Twenty four teeth are present

Description : Full mouth x ray survey at birth reveals: A. Ten teeth are present B. Twenty teeth are present C. Twenty four teeth are present

Last Answer : C. Twenty four teeth are present

What is the relationship of the retentive portion of the partial dentures retainers to the survey line of abutment: A. Gingival /Below/ B. Occlusal /Above/ C. No relation

Description : What is the relationship of the retentive portion of the partial dentures retainers to the survey line of abutment: A. Gingival /Below/ B. Occlusal /Above/ C. No relation

Last Answer : A. Gingival /Below/

What is the primary consideration in providing nutrition/dietary counselling to a patient: A. Secure details of patient’s eating habits B. Have the patient to fill in a diet survey C. Eliminate sugar from diet

Description : What is the primary consideration in providing nutrition/dietary counselling to a patient: A. Secure details of patient’s eating habits B. Have the patient to fill in a diet survey C. Eliminate sugar from diet

Last Answer : B. Have the patient to fill in a diet survey

Where is the retentive position on teeth according to the survey line: A. Below the height of contour B. Next to gingival margins

Description : Where is the retentive position on teeth according to the survey line: A. Below the height of contour B. Next to gingival margins

Last Answer : A. Below the height of contour

Which of the following areas CANNOT be determined by survey analysis of partially edentulous cast? A. Areas to be revealed as blocked out to properly located rigid parts of a frame work B. Areas to be shaped to properly located rigid parts of framework C. Areas used for guideline planes D. Areas used for retention E. Areas used for support F. Depth of rest seats

Description : Which of the following areas CANNOT be determined by survey analysis of partially edentulous cast? A. Areas to be revealed as blocked out to properly located rigid parts of a frame work B. Areas to be ... planes D. Areas used for retention E. Areas used for support F. Depth of rest seats

Last Answer : F. Depth of rest seats

The hamular notch is important in full denture construction because it aids in the setting position of the artificial teeth A. First statement is true, but the reason given is false B. Both statements are true C. Both statements are untrue

Description : The hamular notch is important in full denture construction because it aids in the setting position of the artificial teeth A. First statement is true, but the reason given is false B. Both statements are true C. Both statements are untrue

Last Answer : A. First statement is true, but the reason given is false

A Gold clasp is more elastic than Cobalt Chrome, but Co-Chrome has high modulus of elasticity. A. The first statement is false the second is true B. Both are true C. The first is true the second is false D. Both are false

Description : A Gold clasp is more elastic than Cobalt Chrome, but Co-Chrome has high modulus of elasticity. A. The first statement is false the second is true B. Both are true C. The first is true the second is false D. Both are false

Last Answer : B. Both are true

Which of the following is false in regard to Cleft. Palate? a. May be submucous. b. More common in males than females c. Predispose to speech defects, orthodontics problem and hearing loss. d. Patients are more likely to have cardiovascular defect than the general population.

Description : Which of the following is false in regard to Cleft. Palate? a. May be submucous. b. More common in males than females c. Predispose to speech defects, orthodontics problem and hearing loss. d. Patients are more likely to have cardiovascular defect than the general population.

Last Answer : b. More common in males than females

Apical migration of the epithelial attachment followed by atrophy of marginal gingiva at the same level results in: A. False periodontal pocket B. Periodontal pocket recession C. Gingival cleft D. True pocket

Description : Apical migration of the epithelial attachment followed by atrophy of marginal gingiva at the same level results in: A. False periodontal pocket B. Periodontal pocket recession C. Gingival cleft D. True pocket

Last Answer : B. Periodontal pocket recession

Which of the following is false in regard to Cleft-Palate? A. May be submucous B. More common in males than females C. Predispose to speech defects, orthodontics problem and hearing loss D. Patients are more likely to have cardiovascular defect than the general

Description : Which of the following is false in regard to Cleft-Palate? A. May be submucous B. More common in males than females C. Predispose to speech defects, orthodontics problem and hearing loss D. Patients are more likely to have cardiovascular defect than the general

Last Answer : B. More common in males than females

What is the purpose of making a record of protrusive relation and what function does it serve after it is made? A. To register the condylar path and to adjust the inclination of the incisal guidance. B. To aid in determining the freeway space and to adjust the inclination of the incisal guidance. C. to register the condylar path and to adjust the condylar guides of the articulator so that they are equivalent to the condylar paths of the patient.

Description : What is the purpose of making a record of protrusive relation and what function does it serve after it is made? A. To register the condylar path and to adjust the inclination of the ... the condylar guides of the articulator so that they are equivalent to the condylar paths of the patient.

Last Answer : C. to register the condylar path and to adjust the condylar guides of the articulator so that they are equivalent to the condylar paths of the patient.

After making an impression to reline an RPD the dentist notes that the indirect retainers are not resting on the tooth. To avoid this, what process should have undertaken initially: A. Ask patient to bite firmly while impression is setting B. Hold the metal base frame against the abutment tooth while setting C. Fabricate new denture D. Add impression material and close the gap

Description : After making an impression to reline an RPD the dentist notes that the indirect retainers are not resting on the tooth. To avoid this, what process should have undertaken initially: A. Ask ... abutment tooth while setting C. Fabricate new denture D. Add impression material and close the gap

Last Answer : B. Hold the metal base frame against the abutment tooth while setting

The maxillary canine is missing. The best way for making Cantilever bridge is on: A. Both premolars B. Incisors and premolars

Description : The maxillary canine is missing. The best way for making Cantilever bridge is on: A. Both premolars B. Incisors and premolars

Last Answer : A. Both premolars

What is the purpose of making a record of protrusive relation and what function does it serve after it is made?******** M07 A. To register the condylar path and to adjust the inclination of the incisal guidance. B. To aid in determining the freeway space and to adjust the inclination of the incisal guidance. C. To register the condylar path and to adjust the condylar guides of the articulator so that they are

Description : What is the purpose of making a record of protrusive relation and what function does it serve after it is made?******** M07 A. To register the condylar path and to adjust the inclination of ... C. To register the condylar path and to adjust the condylar guides of the articulator so that they are

Last Answer : C. To register the condylar path and to adjust the condylar guides of the articulator so that they are

The lamina dura is seen on periapical radiographs as:CHECK A. Usual radiolucency between tooth root and surrounding bone as a thin white line. B. Cribriform plate of bone making the tooth socket C. Dense crestal bone consistent with a healthy periodontal status D. Pattern of radiopaque lines in supporting alveolar bone

Description : The lamina dura is seen on periapical radiographs as:CHECK A. Usual radiolucency between tooth root and surrounding bone as a thin white line. B. Cribriform plate of bone making the ... bone consistent with a healthy periodontal status D. Pattern of radiopaque lines in supporting alveolar bone

Last Answer : B. Cribriform plate of bone making the tooth socket

cyst at the apex of an upper central incisor measuring 1 cm in diameter is visualized in radiograph and confirmed by aspiration biopsy; which method of treatment would you consider?** A. Extraction of the central incisor and retrieving the cyst through the socket B. Exteriorizing the cyst through the buccal bone and mucosa C. Making a mucoperiosteal flap and removing the cyst through an opening made in the alveolar bone, followed by tooth removal. D. Making a mucoperiosteal flap and removing the cyst through an opening made in the alveolar bone, followed by endodontic treatment. E. Routine orthograde endodontic treatment followed by observation.

Description : cyst at the apex of an upper central incisor measuring 1 cm in diameter is visualized in radiograph and confirmed by aspiration biopsy; which method of treatment would you consider?** ... bone, followed by endodontic treatment. E. Routine orthograde endodontic treatment followed by observation.

Last Answer : D. Making a mucoperiosteal flap and removing the cyst through an opening made in the alveolar bone, followed by endodontic treatment.

In testing for mobility, which of the following statement is true: a.Heavy pressure must sometimes be used to test mobility. b.Only lateral mobility is significant in diagnosis and treatment of chronic inflammatory periodontal disease. c.Hyper mobility indicates that the tooth supporting structure have been weakened. d.During the periodontal examination each tooth should be tested individually for hyper mobility.

Description : In testing for mobility, which of the following statement is true: a.Heavy pressure must sometimes be used to test mobility. b.Only lateral mobility is significant in diagnosis and ... weakened. d.During the periodontal examination each tooth should be tested individually for hyper mobility.

Last Answer : d.During the periodontal examination each tooth should be tested individually for hyper mobility.

Which of the following statement is correct for a periodontal disease:** A. The finger pressure is enough for mobility diagnosis B. A communicable disease C. X ray after intra alveolar surgery is sufficient for diagnosis healing D. Systemic diseases have no effects on it E. ZoE paste will accelerate healing

Description : Which of the following statement is correct for a periodontal disease:** A. The finger pressure is enough for mobility diagnosis B. A communicable disease C. X ray after intra alveolar surgery ... diagnosis healing D. Systemic diseases have no effects on it E. ZoE paste will accelerate healing

Last Answer : E. ZoE paste will accelerate healing

Which one of the following statement is correct, A. The remnants of Ameloblast contribute to the primary enamel cuticle B. the last secretion of the odontoblast is cementum X C. The last secretion of the ameloblast is the acquired of enamel cuticle D. The remnants of odontoblast form the primary enamel cuticle

Description : Which one of the following statement is correct, A. The remnants of Ameloblast contribute to the primary enamel cuticle B. the last secretion of the odontoblast is cementum X C. The ... ameloblast is the acquired of enamel cuticle D. The remnants of odontoblast form the primary enamel cuticle

Last Answer : A. The remnants of Ameloblast contribute to the primary enamel cuticle

Which statement BEST describes plaque: A. It is a soft film composed mainly of food debris and can not be rinsed off teeth B. It is a soft film composed mainly of food debris and can be rinsed off teeth C. It is a soft film composed mainly of none calcified bacteria and can not be rinsed off the teeth D. It is a soft film composed mainly of dextran and can not be rinsed off the teeth E. It is a soft film composed mainly of dextran and can be rinsed off teeth.

Description : Which statement BEST describes plaque: A. It is a soft film composed mainly of food debris and can not be rinsed off teeth B. It is a soft film composed mainly of food debris and can be rinsed off ... rinsed off the teeth E. It is a soft film composed mainly of dextran and can be rinsed off teeth.

Last Answer : C. It is a soft film composed mainly of none calcified bacteria and can not be rinsed off the teeth

Which one of following statement about Overdenture is not correct: A. Greater occlusal loads can be applied by the patient B. Retention and stability are generally better than with conventional complete denture C. Alveolar bone resorption is reduced D. The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

Description : Which one of following statement about Overdenture is not correct: A. Greater occlusal loads can be applied by the patient B. Retention and stability are generally better than with ... The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

Last Answer : D. The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

Choose a statement that correctly defines the term AMALGAM: A. Amalgam is a metallic powder composed of silver, tin, copper and zinc B. Amalgam is an alloy of two or more metals that have been dissolved in each other in the molten state. C. Amalgam is an alloy of two or more metals, one of them is mercury D. Amalgam is a metallic substance in powder or tablet from that is mixed with mercury E. Amalgam is an alloy of two or more metals, one of them is tin

Description : Choose a statement that correctly defines the term AMALGAM: A. Amalgam is a metallic powder composed of silver, tin, copper and zinc B. Amalgam is an alloy of two or more metals that have been dissolved in ... is mixed with mercury E. Amalgam is an alloy of two or more metals, one of them is tin

Last Answer : C. Amalgam is an alloy of two or more metals, one of them is mercury

When repairing a fracture of a lower complete denture, which statement is correct: A. Self curing will distort the denture B. Cold curing will not be strong enough because of small area of attachment C. There is a possibility of occlusal disharmony

Description : When repairing a fracture of a lower complete denture, which statement is correct: A. Self curing will distort the denture B. Cold curing will not be strong enough because of small area of attachment C. There is a possibility of occlusal disharmony

Last Answer : C. There is a possibility of occlusal disharmony

.Fluoridation is the adjustment of the fluoride content of a community water supply to optimum levels for caries prevention. Which of the following statement is correct? A. Tooth decay declines by 90% to 95% B. Tooth decay declines by 45% to 55% C. Greater reduction in smooth surface caries from in pit and fissures D. Fluoridation increases vulnerability to osteoporosis

Description : .Fluoridation is the adjustment of the fluoride content of a community water supply to optimum levels for caries prevention. Which of the following statement is correct? A. Tooth decay ... in smooth surface caries from in pit and fissures D. Fluoridation increases vulnerability to osteoporosis

Last Answer : C. Greater reduction in smooth surface caries from in pit and fissures