What is the ideal length for a post in post-core in an endodontically treated tooth: A. 2/3 of the tooth length B. ½ of the tooth length C. 1.5 times that of the crown D. Same as the anticipated crown

What is the ideal length for a post in post-core in an endodontically treated tooth:
A. 2/3 of the tooth length
B. ½ of the tooth length
C. 1.5 times that of the crown
D. Same as the anticipated crown
by

1 Answer

Answer :

A. 2/3 of the tooth length
by

Related questions

The ideal length of core in the fabrication of crown and core of endodontically treated tooth is, A. 1.5 of crown length B. The length of the crown C. 2/3 tooth/root length D. ½ root length

Description : The ideal length of core in the fabrication of crown and core of endodontically treated tooth is, A. 1.5 of crown length B. The length of the crown C. 2/3 tooth/root length D. ½ root length

Last Answer : C. 2/3 tooth/root length

A vital tooth has a crown cemented to a pin-retained amalgam core; where does a failure occur: A. Between crown and cement B. Between core and cement C. In the crown and the root D. In the core and the margin preparation

Description : A vital tooth has a crown cemented to a pin-retained amalgam core; where does a failure occur: A. Between crown and cement B. Between core and cement C. In the crown and the root D. In the core and the margin preparation

Last Answer : B. Between core and cement

The cervical finish line of a full veneer crown preparation should be placed: A. Just supragingival whenever is possible B. According to the depth of gingival crevice C. Subgingival to reduce ability of recurrent caries D. At the junction of tooth and amalgam core

Description : The cervical finish line of a full veneer crown preparation should be placed: A. Just supragingival whenever is possible B. According to the depth of gingival crevice C. Subgingival to reduce ability of recurrent caries D. At the junction of tooth and amalgam core

Last Answer : A. Just supragingival whenever is possible

A labially displaced anterior tooth is restored with a gold core porcelain jacket crown so that it is in line with the arch; the crown will appears: A. Short B. Long C. Narrow D. Wide

Description : A labially displaced anterior tooth is restored with a gold core porcelain jacket crown so that it is in line with the arch; the crown will appears: A. Short B. Long C. Narrow D. Wide

Last Answer : C. Narrow

After replantation of an avulsed tooth 2 ½ hours after incident; the most likely diagnosis is, A. External resorption B. Internal resorption C. Pulp stones

Description : After replantation of an avulsed tooth 2 ½ hours after incident; the most likely diagnosis is, A. External resorption B. Internal resorption C. Pulp stones

Last Answer : A. External resorption

The minimal labial tooth reduction for satisfactory aesthetics with porcelain fused to metal crown is, A. 1mm B. The full thickness of enamel C. 1.5 mm D. 2.5mm E. One third of the dentine thickness

Description : The minimal labial tooth reduction for satisfactory aesthetics with porcelain fused to metal crown is, A. 1mm B. The full thickness of enamel C. 1.5 mm D. 2.5mm E. One third of the dentine thickness

Last Answer : C. 1.5 mm

In the construction of a full veneer gold crown, future recession of gingival tissue can be prevented or at least minimised by, A. Extension of the crown 1 mm under the gingival crevice B. Reproduction of normal tooth incline in the gingival one third of the crown C. Slight over contouring of the tooth in the gingival one fifth of the crown D. Slight under contouring of the tooth in the gingival one fifth of the crown

Description : In the construction of a full veneer gold crown, future recession of gingival tissue can be prevented or at least minimised by, A. Extension of the crown 1 mm under the gingival crevice B. ... of the crown D. Slight under contouring of the tooth in the gingival one fifth of the crown

Last Answer : B. Reproduction of normal tooth incline in the gingival one third of the crown

The OPTIMUM crown to root ratio for abutment tooth is:** A. 2:3 B. 1:1

Description : The OPTIMUM crown to root ratio for abutment tooth is:** A. 2:3 B. 1:1

Last Answer : A. 2:3

A cast crown fits on the die but not on the tooth, the discrepancy is about 0.3mm, what would you do: A. Relieve cast from the inside B. Take a new impression and make new crown C. Burnish margins D. Use thick mix of cement

Description : A cast crown fits on the die but not on the tooth, the discrepancy is about 0.3mm, what would you do: A. Relieve cast from the inside B. Take a new impression and make new crown C. Burnish margins D. Use thick mix of cement

Last Answer : B. Take a new impression and make new crown

In regard to apically displaced flap, what is TRUE: A. Does not preserve attached gingivae B. Does not lengthen crown of tooth C. Is a pocket elimination procedure D. A & C

Description : In regard to apically displaced flap, what is TRUE: A. Does not preserve attached gingivae B. Does not lengthen crown of tooth C. Is a pocket elimination procedure D. A & C

Last Answer : C. Is a pocket elimination procedure

Odontogenic cysts develop from the following structures except: A. Reduced enamel epithelium of tooth crown B. Dental lamina dura C. Epithelium trapped after sutures D. ertwig’s root sheath

Description : Odontogenic cysts develop from the following structures except: A. Reduced enamel epithelium of tooth crown B. Dental lamina dura C. Epithelium trapped after sutures D. ertwig’s root sheath

Last Answer : C. Epithelium trapped after sutures

When you try to seat a crown on a tooth you find a discrepancy of 0.3mm at the margin; you will: A. Reduce inner surface of crown B. Remake a new crown C. Smooth the enamel at the margin D. Hand burnish crown margins

Description : When you try to seat a crown on a tooth you find a discrepancy of 0.3mm at the margin; you will: A. Reduce inner surface of crown B. Remake a new crown C. Smooth the enamel at the margin D. Hand burnish crown margins

Last Answer : B. Remake a new crown

A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown can BEST be achieved by: A. Hand burnishing B. Mechanical burnishing C. Using finishing burs and points to remove the enamel margins on the tooth D. Making a new impression and remaking the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Description : A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown ... the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Last Answer : D. Making a new impression and remaking the crown

In bridge work, which of the followings terms is NOT CORRECT: A. A retainer could be a crown to which a bridge is attached to B. A connector connects a pontic to a retainer or two retainers to each other C. The saddle is the area of the edentulous ridge over which the pontic will lie and comes in contact with pontic D. A pontic is an artificial tooth as part of a bridge

Description : In bridge work, which of the followings terms is NOT CORRECT: A. A retainer could be a crown to which a bridge is attached to B. A connector connects a pontic to a retainer or two retainers to each ... lie and comes in contact with pontic D. A pontic is an artificial tooth as part of a bridge

Last Answer : C. The saddle is the area of the edentulous ridge over which the pontic will lie and comes in contact with pontic

A large amalgam core is to be condensed around several pins in a vital molar tooth; what type of amalgam mix would you prefer: A. A large mix to ensure homogeneity B. A large with extra mercury to give easier manipulative qualities C. Several small mixes, sequentially triturated D. Several small mixes with varying mercury/alloy ratios E. A basic mix to which additional mercury is added as needed

Description : A large amalgam core is to be condensed around several pins in a vital molar tooth; what type of amalgam mix would you prefer: A. A large mix to ensure homogeneity B. A large with ... small mixes with varying mercury/alloy ratios E. A basic mix to which additional mercury is added as needed

Last Answer : C. Several small mixes, sequentially triturated

A patient with a history of angina suffers an attack while in the dental chair. Prompt relief can be anticipated in MOST instances from: A. Oral administration of short acting barbiturates B. Intra muscular administration of morphine sulphate C. Subcutaneous administration of epinephrine D. Sublingual administration of glyceryl tri-nitrate E. Putting the patient in upright position

Description : A patient with a history of angina suffers an attack while in the dental chair. Prompt relief can be anticipated in MOST instances from: A. Oral administration of short acting ... epinephrine D. Sublingual administration of glyceryl tri-nitrate E. Putting the patient in upright position

Last Answer : D. Sublingual administration of glyceryl tri-nitrate

A 65 years-old woman arrived for dental therapy. The answered questionnaire shows that she is suffering from severe cirrhosis. The problem that can be anticipated in the routine dental therapy is: A. Extreme susceptibility to pain B. Tendency towards prolonged haemorrhage C. Recurring oral infection D. Increased tendency to syncope E. Difficulty in achieving adequate local anaesthesia

Description : A 65 years-old woman arrived for dental therapy. The answered questionnaire shows that she is suffering from severe cirrhosis. The problem that can be anticipated in the routine dental ... oral infection D. Increased tendency to syncope E. Difficulty in achieving adequate local anaesthesia

Last Answer : B. Tendency towards prolonged haemorrhage

If the focal spot to film distance is increased from 20cm to 40cm, the intensity of radiation is reduced by: a. ½ b. ¼ . c. 1/3 d. 1/5

Description : If the focal spot to film distance is increased from 20cm to 40cm, the intensity of radiation is reduced by: a. ½ b. ¼ . c. 1/3 d. 1/5

Last Answer : b. ¼ .

If the focal spot to film distance is increased from 20cm to 40cm, the intensity of radiation is reduced by: A. ½ B. ¼ C. 1/3 D. 1/5

Description : If the focal spot to film distance is increased from 20cm to 40cm, the intensity of radiation is reduced by: A. ½ B. ¼ C. 1/3 D. 1/5

Last Answer : B. ¼

As far as surgical removal of wisdom teeth is concerned which of the following is true? a- Prophylactic prescription of antibiotic reduces dramatically the chances of infection. b- Raising a lingual flap will increases the incidence of neurapraxia but will reduce the incidence of neurotmesis with respect to the lingual nerve. c- Prophylactic prescription of dexamethasone will dramatically reduce post operative swelling. d- Inferior dental nerve injury is unlikely since the nerve passes medial to the wisdom tooth root. e- The use of vasoconstrictors in local anaesthetics will increase the chances of infection.

Description : As far as surgical removal of wisdom teeth is concerned which of the following is true? a- Prophylactic prescription of antibiotic reduces dramatically the chances of infection. b- Raising a lingual ... e- The use of vasoconstrictors in local anaesthetics will increase the chances of infection.

Last Answer : b- Raising a lingual flap will increases the incidence of neurapraxia but will reduce the incidence of neurotmesis with respect to the lingual nerve.

As far as surgical removal of wisdom teeth is concerned, which of the following is true?**CHECK A. Prophylactic prescription of antibiotic reduces dramatically the chances of infection B. Raising a lingual flap will increases the incidence of neurapraxia but will reduce the incidence of neurotmesis with respect to the lingual nerve ADC M07 C. Prophylactic prescription of dexamethasone will dramatically reduces post operative swelling D. Inferior dental nerve injury is unlikely since the nerve passes medial to the wisdom tooth root E. The use of vasoconstrictors in local anaesthetics will increase the chances of infection.

Description : As far as surgical removal of wisdom teeth is concerned, which of the following is true?**CHECK A. Prophylactic prescription of antibiotic reduces dramatically the chances of infection B. Raising ... root E. The use of vasoconstrictors in local anaesthetics will increase the chances of infection.

Last Answer : C. Prophylactic prescription of dexamethasone will dramatically reduces post operative swelling

The ideal length of RCT is, A. At the apex B. As far as you can obturate C. 0.5 - 1.5 mm before the apex

Description : The ideal length of RCT is, A. At the apex B. As far as you can obturate C. 0.5 - 1.5 mm before the apex

Last Answer : C. 0.5 - 1.5 mm before the apex

“Pop off” of a porcelain veneer from the under the lying gold crown is due to:** A. Too thick application of pure gold surface conditioner B. Contamination at the porcelain metal interface C. Under firing the opaque layer D. All of the above

Description : “Pop off” of a porcelain veneer from the under the lying gold crown is due to:** A. Too thick application of pure gold surface conditioner B. Contamination at the porcelain metal interface C. Under firing the opaque layer D. All of the above

Last Answer : B. Contamination at the porcelain metal interface

When should metallic framework not be contaminated during the fabrication of a porcelain fused to metal crown: A. Between bisque stage and glazing stage B. Between preheat and opaque stages C. Between opaque and bisque stages D. Between one opaque and two opaque stages

Description : When should metallic framework not be contaminated during the fabrication of a porcelain fused to metal crown: A. Between bisque stage and glazing stage B. Between preheat and opaque stages C. Between opaque and bisque stages D. Between one opaque and two opaque stages

Last Answer : B. Between preheat and opaque stages

A 8 years-old patient has 3 first premolars erupted and a swelling on the ridge of the un-erupted premolar. X ray shows a fully developed crown and ¾ roots development with no other pathology. What is your management: A. Remove the dentigerous cyst B. Soft tissues recision to allow eruption C. Soft tissues recision accompanied with orthodontic appliance to help with eruption

Description : A 8 years-old patient has 3 first premolars erupted and a swelling on the ridge of the un-erupted premolar. X ray shows a fully developed crown and ¾ roots development with no ... recision to allow eruption C. Soft tissues recision accompanied with orthodontic appliance to help with eruption

Last Answer : C. Soft tissues recision accompanied with orthodontic appliance to help with eruption

The major cause of jacket crown breakage is, A. Inclusion of platinum foil B. Use of weak cementum C. Voids of porcelain D. Porcelain is thinner than 1mm

Description : The major cause of jacket crown breakage is, A. Inclusion of platinum foil B. Use of weak cementum C. Voids of porcelain D. Porcelain is thinner than 1mm

Last Answer : D. Porcelain is thinner than 1mm

Which one of the following is the major disadvantage of stone dies used for crown fabrication, A. They lack accurate reproduction of surface details B. Their overall dimensions are slightly smaller than the original impression C. The strength of the stone D. The hazard of aspiration of toxic materials during trimming of the dies.

Description : Which one of the following is the major disadvantage of stone dies used for crown fabrication, A. They lack accurate reproduction of surface details B. Their overall dimensions are slightly smaller than ... of the stone D. The hazard of aspiration of toxic materials during trimming of the dies.

Last Answer : A. They lack accurate reproduction of surface details

An impression with elastomer in custom tray has been taken for crown preparation; it will be two days before the impression gets to the laboratory for construction of the crown. Which impression material is preferred? A. Polyether B. Thiokol or meraptan rubber C. Condensation silicone D. Vinyl polysiloxane

Description : An impression with elastomer in custom tray has been taken for crown preparation; it will be two days before the impression gets to the laboratory for construction of the crown. Which impression ... A. Polyether B. Thiokol or meraptan rubber C. Condensation silicone D. Vinyl polysiloxane

Last Answer : D. Vinyl polysiloxane

What statement is false: A. Not to survey when making the crown

Description : What statement is false: A. Not to survey when making the crown

Last Answer : A. Not to survey when making the crown

.Lateral canals are usually found at: A. The middle of the root B. First third of the root close to the crown C. The apical third

Description : .Lateral canals are usually found at: A. The middle of the root B. First third of the root close to the crown C. The apical third

Last Answer : C. The apical third

.When correction preparation for re contouring of occlusal surface is to be applied, grinding only of the adjusted surface: A. Should not be felt flat B. Requires a flat crown C. Requires no contact with adjacent teeth D. Should be felt flat

Description : .When correction preparation for re contouring of occlusal surface is to be applied, grinding only of the adjusted surface: A. Should not be felt flat B. Requires a flat crown C. Requires no contact with adjacent teeth D. Should be felt flat

Last Answer : A. Should not be felt flat

Which is the more retentive form for an anterior bridge A. ¾ partial veneer crown B. Class V inlay C. Pinlay Veneer D. Class III inlay with pins

Description : Which is the more retentive form for an anterior bridge A. ¾ partial veneer crown B. Class V inlay C. Pinlay Veneer D. Class III inlay with pins

Last Answer : A. ¾ partial veneer crown

When primary molars are prepared for stainless steel crowns, should the depth for reduction of the proximal surface be similar to the depth of the buccal and lingual surfaces? A. Yes; reduction of all wall is similar for best retention B. No, proximal reduction is greater to allow the crown to pass the contact area C. No, the buccal surfaces has the greatest reduction to remove the cervical bulge D. Yes, all undercuts are uniformly removed so that the steel crown can be seated E. No, because of lateral constriction, the lingual surface needs greatest reduction

Description : When primary molars are prepared for stainless steel crowns, should the depth for reduction of the proximal surface be similar to the depth of the buccal and lingual surfaces? A. Yes; reduction ... can be seated E. No, because of lateral constriction, the lingual surface needs greatest reduction

Last Answer : B. No, proximal reduction is greater to allow the crown to pass the contact area

10 years-old boy looses a permanent mandibular molar; what is affected: A. Teeth adjacent to extracted teeth B. Teeth on both arches on same side C. The remaining teeth in the mouth D. Teeth directly opposite to the extracted tooth E. Teeth on the same quadrant

Description : 10 years-old boy looses a permanent mandibular molar; what is affected: A. Teeth adjacent to extracted teeth B. Teeth on both arches on same side C. The remaining teeth in the mouth D. Teeth directly opposite to the extracted tooth E. Teeth on the same quadrant

Last Answer : C. The remaining teeth in the mouth

Loss of tooth in mixed dentition affects ******** A. Same quadrant B. The relevant jaw C. The whole mouth

Description : Loss of tooth in mixed dentition affects ******** A. Same quadrant B. The relevant jaw C. The whole mouth

Last Answer : C. The whole mouth

Gemination is: a. Division of single tooth, twining. b. Fusion of two or more crowns of teeth c. Fusion of two or more roots.

Description : Gemination is: a. Division of single tooth, twining. b. Fusion of two or more crowns of teeth c. Fusion of two or more roots.

Last Answer : a. Division of single tooth, twining.

An advantage of metal. ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness. B. Overall conservative for tooth structure. C. Ability to watch the appearance of adjacent natural teeth. D. Less laboratory time.

Description : An advantage of metal. ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness. B. Overall conservative for tooth structure. C. Ability to watch the appearance of adjacent natural teeth. D. Less laboratory time.

Last Answer : A. Palatal reduction may be of minimal thickness.

In testing for mobility, which of the following statement is true: a.Heavy pressure must sometimes be used to test mobility. b.Only lateral mobility is significant in diagnosis and treatment of chronic inflammatory periodontal disease. c.Hyper mobility indicates that the tooth supporting structure have been weakened. d.During the periodontal examination each tooth should be tested individually for hyper mobility.

Description : In testing for mobility, which of the following statement is true: a.Heavy pressure must sometimes be used to test mobility. b.Only lateral mobility is significant in diagnosis and ... weakened. d.During the periodontal examination each tooth should be tested individually for hyper mobility.

Last Answer : d.During the periodontal examination each tooth should be tested individually for hyper mobility.

Which of the following is true regarding preparation of custom tray for elastomeric impression: a. Adhesive is preferred over perforation. b. Perforation provides adequate retention c. Adhesive is applied immediately before procedure d. Perforations are not made in the area over the prepared tooth .

Description : Which of the following is true regarding preparation of custom tray for elastomeric impression: a. Adhesive is preferred over perforation. b. Perforation provides adequate retention c. Adhesive is ... before procedure d. Perforations are not made in the area over the prepared tooth .

Last Answer : a. Adhesive is preferred over perforation.

Amalgam restoration, when do you have to replace it? a. Ditching of the edges. b. The probe penetrates the area between the margin and tooth tissue. c. Fissure of the surface of the amalgam. d. When there is chronic inflammation of the pulp.

Description : Amalgam restoration, when do you have to replace it? a. Ditching of the edges. b. The probe penetrates the area between the margin and tooth tissue. c. Fissure of the surface of the amalgam. d. When there is chronic inflammation of the pulp.

Last Answer : c. Fissure of the surface of the amalgam.

Generalised loss of tooth structure by chemical means called, A. Erosion B. Attrition

Description : Generalised loss of tooth structure by chemical means called, A. Erosion B. Attrition

Last Answer : A. Erosion

As a result of wrong use of tooth brush the patients MOST probable complaint will be, A. Spontaneous pain or discomfort B. Occasional pain during brushing of the teeth C. Occasional pain during consumption of sweets

Description : As a result of wrong use of tooth brush the patients MOST probable complaint will be, A. Spontaneous pain or discomfort B. Occasional pain during brushing of the teeth C. Occasional pain during consumption of sweets

Last Answer : C. Occasional pain during consumption of sweets

Gracey curette is characterized by, A. The blade and the shank form 90º angle B. Can be used on both sides C. Can be used on any tooth surface D. It is specific for each surface of the tooth. 70o the other options are for universal

Description : Gracey curette is characterized by, A. The blade and the shank form 90º angle B. Can be used on both sides C. Can be used on any tooth surface D. It is specific for each surface of the tooth. 70o the other options are for universal

Last Answer : D. It is specific for each surface of the tooth. 70o the other options are for universal

Following calcium hydroxide pulpotomy, the dentist would expect dentine bridge to form at, A. The exact level of amputation B. Level somewhere below the amputation C. Half way between amputation and apex D. At the apical region of the tooth

Description : Following calcium hydroxide pulpotomy, the dentist would expect dentine bridge to form at, A. The exact level of amputation B. Level somewhere below the amputation C. Half way between amputation and apex D. At the apical region of the tooth

Last Answer : B. Level somewhere below the amputation

An occlusal approaching clasp TIP, A. Should occupy a predetermined undercut B. Contact the tooth under the survey line C. Rigid

Description : An occlusal approaching clasp TIP, A. Should occupy a predetermined undercut B. Contact the tooth under the survey line C. Rigid

Last Answer : B. Contact the tooth under the survey line

The best storage media for avulsed tooth is, A. Saline B. Milk C. Water D. Saliva

Description : The best storage media for avulsed tooth is, A. Saline B. Milk C. Water D. Saliva

Last Answer : B. Milk

A patient comes to you with medium pain of tooth filled with Composite resin as a result of cold or hot drinks, what will your initial management be, A. Remove the restorative material and start an Endontic treatment B. Remove the restorative material and place a sedative temporary material C. Place a coat of bonding material on the old composite

Description : A patient comes to you with medium pain of tooth filled with Composite resin as a result of cold or hot drinks, what will your initial management be, A. Remove the restorative material and ... material and place a sedative temporary material C. Place a coat of bonding material on the old composite

Last Answer : B. Remove the restorative material and place a sedative temporary material

In preparing a very small proximal amalgam cavity on a molar tooth what would consider, A. Extend the cavity to the gingival margin B. Extend the cavity beyond the contacts areas C. Achieve at least 2mm in dentine D. Extend cavity just beyond dento enamel junction

Description : In preparing a very small proximal amalgam cavity on a molar tooth what would consider, A. Extend the cavity to the gingival margin B. Extend the cavity beyond the contacts areas C. Achieve at least 2mm in dentine D. Extend cavity just beyond dento enamel junction

Last Answer : D. Extend cavity just beyond dento enamel junction

If used, in which direction should pinholes be placed? a. parallel to the long axis of the tooth b.parallel to the nearest external surface c. at a 15 degree angle to the long axis of the tooth d. perpendicular to the gingival floor e. directly below and parallel to restored cusp tip

Description : If used, in which direction should pinholes be placed? a. parallel to the long axis of the tooth b.parallel to the nearest external surface c. at a 15 degree angle to the long axis of the tooth d. perpendicular to the gingival floor e. directly below and parallel to restored cusp tip

Last Answer : b.parallel to the nearest external surface