Transmission of fluid in dentinal tubules is by: A. Hydrodynamic pressure (Osmotic) B. Mechanical

Transmission of fluid in dentinal tubules is by:
A. Hydrodynamic pressure (Osmotic)
B. Mechanical
by

1 Answer

Answer :

A. Hydrodynamic pressure (Osmotic)
by

Related questions

In cavity preparation 1mm below DEJ what is seen: A. More dentinal tubules, some intertubular and peritubular B. Some dentinal tubules, more intertubular and less peritubular C. More peritubular, some intertubular and dentinal tubular D. Equal amount of dentinal tubules, intertubular and peritubular

Description : In cavity preparation 1mm below DEJ what is seen: A. More dentinal tubules, some intertubular and peritubular B. Some dentinal tubules, more intertubular and less peritubular C. More ... , some intertubular and dentinal tubular D. Equal amount of dentinal tubules, intertubular and peritubular

Last Answer : B. Some dentinal tubules, more intertubular and less peritubular

The percentage of total dentine surface / dentinal tubules 0.5mm away from pulp is,** A. 20% B. 50%

Description : The percentage of total dentine surface / dentinal tubules 0.5mm away from pulp is,** A. 20% B. 50%

Last Answer : B. 50%

On applying hypertonic fluid on the dentine, the transmission of fluid through tubules will be: A. From inside to outside B. From outside to insid

Description : On applying hypertonic fluid on the dentine, the transmission of fluid through tubules will be: A. From inside to outside B. From outside to insid

Last Answer : A. From inside to outside

In 3rd generation dentin bonding agents, HEMA (Hydroxyethylmethacrylate) is 1. a hydrophilic monomer that wets the dentinal surface 2. a hydrophilic resin that forms a ”hybrid” layer by chemically reacting the intertubular dentin. 3. a hydrophilic monomer that alters collagen to promote cross linking of collagen to dentin. 4. a bifunctional molecule resin that copolymerizes to bis-GMA resins. a. 1,2 b. 1,4 c. 2,3 d. 1,3 e. 3,4

Description : In 3rd generation dentin bonding agents, HEMA (Hydroxyethylmethacrylate) is 1. a hydrophilic monomer that wets the dentinal surface 2. a hydrophilic resin that forms a hybrid layer by chemically reacting the intertubular dentin. 3. a hydrophilic ... a. 1,2 b. 1,4 c. 2,3 d. 1,3 e. 3,4

Last Answer : b. 1,4

The bur should be tilted lingually when preparing the occlusal surface of class II cavity on a mandibular first premolar in order to: I. Remove unsupported enamel II. Prevent encroachment on the buccal pulp horn III. Prevent encroachment on the lingual pulp horn IV. Maintain dentinal support of the lingual cusp A. I and II B. I and III C. II and IV D. III and IV E. IV only

Description : The bur should be tilted lingually when preparing the occlusal surface of class II cavity on a mandibular first premolar in order to: I. Remove unsupported enamel II. Prevent encroachment on the buccal pulp horn III. Prevent ... and II B. I and III C. II and IV D. III and IV E. IV only

Last Answer : C. II and IV

Trichloroacetic acid, a strong acid, has been used by dentists for chemical cautery of hypertrophic tissue and aphthous ulcers; its mechanism of action is, BOUCHERS P 194 A. Thermodynamic action B. Activation of tissue enzymes C. Osmotic pressure D. Protein precipitation (PPT) E. Neutralization

Description : Trichloroacetic acid, a strong acid, has been used by dentists for chemical cautery of hypertrophic tissue and aphthous ulcers; its mechanism of action is, BOUCHERS P 194 A. Thermodynamic ... Activation of tissue enzymes C. Osmotic pressure D. Protein precipitation (PPT) E. Neutralization

Last Answer : D. Protein precipitation (PPT)

The junction between primary and secondary dentine is,*** A. A reversal line B. Sharp curvature C. A resting line D. A reduction in the number of tubules

Description : The junction between primary and secondary dentine is,*** A. A reversal line B. Sharp curvature C. A resting line D. A reduction in the number of tubules

Last Answer : B. Sharp curvature

Assertion (A): Hydrostatic lubrication is more advantageous when compared to hydrodynamic lubrication during starting and stopping the journal in its bearing. Reason (R): In hydrodynamic lubrication, the fluid film pressure is generated by the rotation of the journal. [IES-1998] (a) Both A and R are individually true and R is the correct explanation of A (b) Both A and R are individually true but R is not the correct explanation of A (c) A is true but R is false (d) A is false but R is true

Description : Assertion (A): Hydrostatic lubrication is more advantageous when compared to hydrodynamic lubrication during starting and stopping the journal in its bearing. Reason (R): In hydrodynamic lubrication, the fluid film pressure is ... (c) A is true but R is false (d) A is false but R is true

Last Answer : (b) Both A and R are individually true but R is not the correct explanation of A

Colloid osmotic pressure of intracellular fluid is (A) Equal to that of plasma (B) More than that of plasma (C) More than that of plasma (D) Nearly zero WATER AND ELECTROLYTE BALANCE 285

Description : Colloid osmotic pressure of intracellular fluid is (A) Equal to that of plasma (B) More than that of plasma (C) More than that of plasma (D) Nearly zero WATER AND ELECTROLYTE BALANCE 285

Last Answer : Answer : B

If a bathing fluid has the same osmotic pressure than the cell it called a. Isotonic b. Hypertonic c. hypotonic d. all

Description : If a bathing fluid has the same osmotic pressure than the cell it called a. Isotonic b. Hypertonic c. hypotonic d. all

Last Answer : Isotonic

If a bathing fluid has higher osmotic pressure than the cell it is called a. Isotonic b. hypotonic c. hypertonic d. all

Description : If a bathing fluid has higher osmotic pressure than the cell it is called a. Isotonic b. hypotonic c. hypertonic d. all

Last Answer : hypertonic

If a bathing fluid has a lower osmotic pressure than the cell, it is called a. Isotonic b. hypotonic c. hypertonic d. All

Description : If a bathing fluid has a lower osmotic pressure than the cell, it is called a. Isotonic b. hypotonic c. hypertonic d. All

Last Answer : hypotonic

An osmotic diuretic, such as Mannitol, is given to the patient with increased intracranial pressure (IICP) in order to a) dehydrate the brain and reduce cerebral edema. Osmotic diuretics draw water across intact membranes, thereby reducing the volume of brain and extracellular fluid.

Description : An osmotic diuretic, such as Mannitol, is given to the patient with increased intracranial pressure (IICP) in order to a) dehydrate the brain and reduce cerebral edema. Osmotic diuretics ... Medications such as barbiturates are given to the patient with IICP to reduce cellular metabolic demands.

Last Answer : a) dehydrate the brain and reduce cerebral edema. Osmotic diuretics draw water across intact membranes, thereby reducing the volume of brain and extracellular fluid.

Oncotic pressure refers to a) the osmotic pressure exerted by proteins. Oncotic pressure is a pulling pressure exerted by proteins, such as albumin. b) the number of dissolved particles contained in a unit of fluid. Osmolality refers to the number of dissolved particles contained in a unit of fluid. c) the excretion of substances such as glucose through increased urine output. Osmotic diuresis occurs when the urine output increases due to excretion of substances such as glucose. d) the amount of pressure needed to stop flow of water by osmosis. Osmotic pressure is the amount of pressure needed to stop the flow of water by osmosis.

Description : Oncotic pressure refers to a) the osmotic pressure exerted by proteins. Oncotic pressure is a pulling pressure exerted by proteins, such as albumin. b) the number of dissolved particles contained in a ... . Osmotic pressure is the amount of pressure needed to stop the flow of water by osmosis.

Last Answer : a) the osmotic pressure exerted by proteins. Oncotic pressure is a pulling pressure exerted by proteins, such as albumin.

At what value of Prandtl number, the hydrodynamic and thermal boundary layers of a fluid flowing over a heated plate will be identical? (A) 1 (B) < 1 (C) > 1 (D) None of these

Description : At what value of Prandtl number, the hydrodynamic and thermal boundary layers of a fluid flowing over a heated plate will be identical? (A) 1 (B) < 1 (C) > 1 (D) None of these

Last Answer : (A) 1

Assertion (A): Oil as a cutting fluid result in a lower coefficient of friction. Reason (R): Oil forms a thin liquid film between the tool face and chip, and it provides 'hydrodynamic lubrication'. [IES- 2000] (a) Both A and R are individually true and R is the correct explanation of A (b) Both A and R are individually true but R is not the correct explanation of A (c) A is true but R is false (d) A is false but R is true

Description : Assertion (A): Oil as a cutting fluid result in a lower coefficient of friction. Reason (R): Oil forms a thin liquid film between the tool face and chip, and it provides 'hydrodynamic lubrication'. [IES- 2000] (a ... explanation of A (c) A is true but R is false (d) A is false but R is true

Last Answer : (c) A is true but R is false

Starting friction is low in case of the __________ lubrication. (A) Boundary (B) Hydrodynamic (C) Hydrostatic (D) Mixed/semi-fluid

Description : Starting friction is low in case of the __________ lubrication. (A) Boundary (B) Hydrodynamic (C) Hydrostatic (D) Mixed/semi-fluid

Last Answer : (C) Hydrostatic

Patient has hot and cold sensation and pain on percussion after the filling of class III Cavity with GIC base and composite. What will be possible cause – 1) bacterial microleakage 2) mechanical trauma of cavity cutting 3) Exothermic reaction while setting GIC

Description : Patient has hot and cold sensation and pain on percussion after the filling of class III Cavity with GIC base and composite. What will be possible cause – 1) bacterial microleakage 2) mechanical trauma of cavity cutting 3) Exothermic reaction while setting GIC

Last Answer : 2) mechanical trauma of cavity cutting

What is the cause of the apical periodontitis after extirpation and instrumentation and temporarely dressing. a. entrapped Bacteria. b. Chemical irritation of the solutions. c. Mechanical irritation of the instruments. d. One or any combination of the above.

Description : What is the cause of the apical periodontitis after extirpation and instrumentation and temporarely dressing. a. entrapped Bacteria. b. Chemical irritation of the solutions. c. Mechanical irritation of the instruments. d. One or any combination of the above.

Last Answer : d. One or any combination of the above.

Sensitivity to hot and cold foods soon after cavity preparation and placement of GIC and composite resin in an upper incisor tooth is due to: A. Mechanical trauma due to cavity preparation B. Chemical C. Heat from GIC settings

Description : Sensitivity to hot and cold foods soon after cavity preparation and placement of GIC and composite resin in an upper incisor tooth is due to: A. Mechanical trauma due to cavity preparation B. Chemical C. Heat from GIC settings

Last Answer : A. Mechanical trauma due to cavity preparation

Marginal leakage at the proximal gingival cavosurface of a recently restored class II can be caused by: I. Insufficient condensation II. First proximal increment was too large III. Neglecting to wedge the matrix IV. Hand manipulation instead of mechanical V. Debris contamination A. I, II, III B. II, III, IV C. I, II, V D. None of the above E. All of the above

Description : Marginal leakage at the proximal gingival cavosurface of a recently restored class II can be caused by: I. Insufficient condensation II. First proximal increment was too large III. Neglecting to wedge the matrix IV. Hand ... III, IV C. I, II, V D. None of the above E. All of the above

Last Answer : C. I, II, V

Calculus attaches to teeth surfaces by: A. Acquired pellicle B. Interlocking to the crystals of the tooth C. Penetrated into enamel and dentine D. Mechanical interlocking E. All of the above

Description : Calculus attaches to teeth surfaces by: A. Acquired pellicle B. Interlocking to the crystals of the tooth C. Penetrated into enamel and dentine D. Mechanical interlocking E. All of the above

Last Answer : E. All of the above

The incisal guidance on the articulator is the:** A. Mechanical equivalent of horizontal and vertical overlap of upper and lower incisors B. Mechanical equivalent of the compensating curve C. Same as condylar guidance D. Estimated by the equation: Incisal guidance = 1/8 of condylar guidance

Description : The incisal guidance on the articulator is the:** A. Mechanical equivalent of horizontal and vertical overlap of upper and lower incisors B. Mechanical equivalent of the compensating curve C. Same as condylar guidance D. Estimated by the equation: Incisal guidance = 1/8 of condylar guidance

Last Answer : A. Mechanical equivalent of horizontal and vertical overlap of upper and lower incisors

A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown can BEST be achieved by: A. Hand burnishing B. Mechanical burnishing C. Using finishing burs and points to remove the enamel margins on the tooth D. Making a new impression and remaking the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Description : A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown ... the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Last Answer : D. Making a new impression and remaking the crown

Herpetic infection is an iatrogenic infection spread by the infected’s: a. Serum. b. Vesicle. c. Vesicle fluid and saliva.

Description : Herpetic infection is an iatrogenic infection spread by the infected’s: a. Serum. b. Vesicle. c. Vesicle fluid and saliva.

Last Answer : c. Vesicle fluid and saliva.

Painless bluish lump filled with fluid on the lips; MOST likely is: A. Smoker’s keratosis B. Squamous cell carcinoma C. Mucocele D. Fibroma E. Fibro-epithelial polyp

Description : Painless bluish lump filled with fluid on the lips; MOST likely is: A. Smoker’s keratosis B. Squamous cell carcinoma C. Mucocele D. Fibroma E. Fibro-epithelial polyp

Last Answer : C. Mucocele

Herpetic infection is an iatrogenic infection spread by the infected’s: A. Serum B. Vesicle C. Vesicle fluid and saliva

Description : Herpetic infection is an iatrogenic infection spread by the infected’s: A. Serum B. Vesicle C. Vesicle fluid and saliva

Last Answer : C. Vesicle fluid and saliva

Suppuration is mainly the result of the combined action of four factors; which of the following is not one of these factors?CHECK A. Necrosis B. Presence of lymphocytes C. Collection of neutrophils D. Accumulation of tissue fluid E. Autolysis by proteolytic enzymes

Description : Suppuration is mainly the result of the combined action of four factors; which of the following is not one of these factors?CHECK A. Necrosis B. Presence of lymphocytes C. Collection of neutrophils D. Accumulation of tissue fluid E. Autolysis by proteolytic enzymes

Last Answer : B. Presence of lymphocytes

What is The Transmission of the Signal?

Description : What is The Transmission of the Signal?

Last Answer : The transmission of the signal is basically the same in all cells, the signal is sent across the synapse by the axon and the dendrite of the next cell picks up the signal.

Assertion (A): In hydrodynamic journal bearings, the rotating journal is held in floating condition by the hydrodynamic pressure developed in the lubricant. Reason (R): Lubricant flows in a converging-diverging channel. [IES-1994] (a) Both A and R are individually true and R is the correct explanation of A (b) Both A and R are individually true but R is not the correct explanation of A (c) A is true but R is false (d) A is false but R is true

Description : Assertion (A): In hydrodynamic journal bearings, the rotating journal is held in floating condition by the hydrodynamic pressure developed in the lubricant. Reason (R): Lubricant flows in a converging-diverging channel. [IES-1994] ... A (c) A is true but R is false (d) A is false but R is true

Last Answer : (a) Both A and R are individually true and R is the correct explanation of A

Satisfactory hydrodynamic film in a journal bearing is formed when (a) Journal speed is low; unit pressure on the bearing is high and viscosity of lubricant used is low [IES-2006] (b) Journal speed is low; unit pressure on the bearing is low and viscosity of lubricant used is low (c) Journal speed is high; unit pressure on the bearing is high and viscosity of lubricant used is high (d) Appropriate combination of journal speed, unit pressure on bearing and lubricant viscosity exists resulting in low coefficient of friction

Description : Satisfactory hydrodynamic film in a journal bearing is formed when (a) Journal speed is low; unit pressure on the bearing is high and viscosity of lubricant used is low [IES-2006] ... journal speed, unit pressure on bearing and lubricant viscosity exists resulting in low coefficient of friction

Last Answer : (c) Journal speed is high; unit pressure on the bearing is high and viscosity of lubricant used is high

The bearing characteristic number in a hydrodynamic bearing depends on- (a) Length, width and load (b) length, width and speed. [IES-1996] (c) Viscosity, speed and load (d) viscosity, speed and bearing pressure.

Description : The bearing characteristic number in a hydrodynamic bearing depends on- (a) Length, width and load (b) length, width and speed. [IES-1996] (c) Viscosity, speed and load (d) viscosity, speed and bearing pressure.

Last Answer : (d) viscosity, speed and bearing pressure.

Assertion (A): In steady rotating condition the journal inside a hydrodynamic journal bearing remains floating on the oil film. [IES-2008] Reason (R): The hydrodynamic pressure developed in steady rotating conditions in journal bearings balances the load on the journal. (a) Both A and R are true and R is the correct explanation of A (b) Both A and R are true but R is NOT the correct explanation of A (c) A is true but R is false (d) A is false but R is true

Description : Assertion (A): In steady rotating condition the journal inside a hydrodynamic journal bearing remains floating on the oil film. [IES-2008] Reason (R): The hydrodynamic pressure developed in steady rotating conditions in journal ... A (c) A is true but R is false (d) A is false but R is true

Last Answer : (a) Both A and R are true and R is the correct explanation of A

For elasto-hydrodynamic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like pump to supply lubricant under pressure (C) There should be elastic deformation of the parts in contact (D) There should be metal to metal contact

Description : For elasto-hydrodynamic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like ... be elastic deformation of the parts in contact (D) There should be metal to metal contact

Last Answer : (C) There should be elastic deformation of the parts in contact

For hydrodynamic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like pump to supply lubricant under pressure (C) There should be elastic deformation of the parts in contact (D) There should be metal to metal contact

Description : For hydrodynamic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like pump to ... be elastic deformation of the parts in contact (D) There should be metal to metal contact

Last Answer : (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space

The pressure that builds up in pore water due to load increment on the soil, is termed (A) Excess pore pressure (B) Excess hydrostatic pressure (C) Hydrodynamic pressure (D) All the above

Description : The pressure that builds up in pore water due to load increment on the soil, is termed (A) Excess pore pressure (B) Excess hydrostatic pressure (C) Hydrodynamic pressure (D) All the above

Last Answer : Answer: Option D

Horizontal acceleration due to earthquake results in (A) Hydrodynamic pressure (B) Inertia force into the body of the dam (C) Both (A) and (B) (D) None of the above

Description : Horizontal acceleration due to earthquake results in (A) Hydrodynamic pressure (B) Inertia force into the body of the dam (C) Both (A) and (B) (D) None of the above

Last Answer : Answer: Option C

Hydrodynamic pressure due to earthquake acts at a height of (A) 3H/4 above the base (B) 3H/4 below the water surface (C) 4H/3 above the base (D) 4H below the water surface, where H is the depth of water.

Description : Hydrodynamic pressure due to earthquake acts at a height of (A) 3H/4 above the base (B) 3H/4 below the water surface (C) 4H/3 above the base (D) 4H below the water surface, where H is the depth of water.

Last Answer : Answer: Option C

Differentiate between Osmotic Pressure and Osmotic Potential. -Biology

Description : Differentiate between Osmotic Pressure and Osmotic Potential. -Biology

Last Answer : answer:

Osmotic pressure is maintained by blood colloid

Description : Osmotic pressure is maintained by blood colloid

Last Answer : Osmotic pressure is maintained by blood colloid A. Albumin B. Globulin C. Fibrinogen D. Thrombin

Blood colloidal osmotic pressure mainly maintained by which plasma protein `:-`

Description : Blood colloidal osmotic pressure mainly maintained by which plasma protein `:-`

Last Answer : Blood colloidal osmotic pressure mainly maintained by which plasma protein `:-` A. Globulin B. Albumin C. Fibrinogen D. Prothombin

$ those subtances which reduce the rate of transpiration are called transpirants. ! Imbibition causes Osmotic pressure.

Description : $ those subtances which reduce the rate of transpiration are called transpirants. ! Imbibition causes Osmotic pressure.

Last Answer : $ those subtances which reduce the rate of transpiration are called transpirants. ! Imbibition causes Osmotic ... D. If both As and R are wrong.

Contribution of albumin to colloid osmotic pressure of plasma is about (A) 10% (B) 50% (C) 80% (D) 90%

Description : Contribution of albumin to colloid osmotic pressure of plasma is about (A) 10% (B) 50% (C) 80% (D) 90%

Last Answer : Answer : C

Osmotic pressure of plasma is (A) 80–100 milliosmole/litre (B) 180–200 milliosmole/litre (C) 280–300 milliosmole/litre (D) 380–400 milliosmole/litre

Description : Osmotic pressure of plasma is (A) 80–100 milliosmole/litre (B) 180–200 milliosmole/litre (C) 280–300 milliosmole/litre (D) 380–400 milliosmole/litre

Last Answer : Answer : C

What is osmotic pressure ?

Description : What is osmotic pressure ?

Last Answer : Osmotic pressure is the pressure created in a aqueous solution by a region of lower solute concentration upon a region of higher solute concentration forcing the passage of water from that to this more ... a semipermeable membrane but it creates a compensatory flux of water in the opposite way.

Water from soil enters into the root hairs owing to : (1) Atmospheric pressure (2) Capillary pressure (3) Root pressure (4) Osmotic pressure

Description : Water from soil enters into the root hairs owing to : (1) Atmospheric pressure (2) Capillary pressure (3) Root pressure (4) Osmotic pressure

Last Answer : (2) Capillary pressure Explanation: In plants, the transpiration stream is the uninterrupted stream of water, and other, which is taken up by the roots and, via the xylem vessels, ... the difference in water potential between the soil and the substomatal cavity caused by transpiration.

The haemodialyzer has semi-permeable lining of tubes which help to: (a) To maintain osmotic pressure of blood. (b) To filter nitrogenous wastes from the dialyzing solution. (c) In passing the waste product, in the dialyzing solution. (d) To pump purified blood back into the body of the patient.

Description : The haemodialyzer has semi-permeable lining of tubes which help to: (a) To maintain osmotic pressure of blood. (b) To filter nitrogenous wastes from the dialyzing solution. (c) In passing the waste product, in the dialyzing solution. (d) To pump purified blood back into the body of the patient.

Last Answer : (c) In passing the waste product, in the dialyzing solution.

Define osmotic pressure.

Description : Define osmotic pressure.

Last Answer : Ans:- The extra pressure that must be applied to the solution side to prevent the flow of solvent molecules into solution through a semi permeable membrane is called osmotic pressure.