What is The Transmission of the Signal?

What is The Transmission of the Signal?
by

1 Answer

Answer :

The transmission of the signal is basically the same in all cells, the signal is sent across the synapse by the axon and the dendrite of the next cell picks up the signal.
by

Related questions

What is Signal Strength?

Description : What is Signal Strength?

Last Answer : For the signal to be passed from one neuron to the next it must have enough energy to break a point called the threshold. Once the threshold is broken the signal is transmitted. The neuron fires ... is decided by how many different neurons are being fired and at what frequency they are being fired.

Transmission of fluid in dentinal tubules is by: A. Hydrodynamic pressure (Osmotic) B. Mechanical

Description : Transmission of fluid in dentinal tubules is by: A. Hydrodynamic pressure (Osmotic) B. Mechanical

Last Answer : A. Hydrodynamic pressure (Osmotic)

On applying hypertonic fluid on the dentine, the transmission of fluid through tubules will be: A. From inside to outside B. From outside to insid

Description : On applying hypertonic fluid on the dentine, the transmission of fluid through tubules will be: A. From inside to outside B. From outside to insid

Last Answer : A. From inside to outside

signal reception is to ________ as signal transmission is to ________. -General Knowledge

Description : signal reception is to ________ as signal transmission is to ________. -General Knowledge

Last Answer : Signal reception is to dendrite as signal transmission is to axon.

Reduction of signal strength during transmission is called attenuation. -Technology

Description : Reduction of signal strength during transmission is called attenuation. -Technology

Last Answer : TrueDuring transmission, the signal strength is reduced, this phenomenon is called attenuation.

Quality of transmission depends upon (1) Nature of signal only (2) Nature of medium only (3) Both (1) and (2) (4) Neither A nor B

Description : Quality of transmission depends upon (1) Nature of signal only (2) Nature of medium only (3) Both (1) and (2) (4) Neither A nor B

Last Answer : (3) Both (1) and (2) Explanation: Quality of transmission is governed both by nature of signal and nature of communication channel/medium.

Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Description : Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Last Answer : B. The approximation of the quantized signal

Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Description : Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Last Answer : The approximation of the quantized signal

A component that samples the microwave signal travelling in one direction down to the transmission line A. Isolator B. Combiner C. Directional coupler D. Attenuator

Description : A component that samples the microwave signal travelling in one direction down to the transmission line A. Isolator B. Combiner C. Directional coupler D. Attenuator

Last Answer : C. Directional coupler

What is the propagation velocity of a signal in a transmission line whose inductance and capacitance are 5μH/m and 20μF/m respectively? A. 100x103 m/s B. 100 m/s C. 10x103 m/s D. 100x106 m/s

Description : What is the propagation velocity of a signal in a transmission line whose inductance and capacitance are 5μH/m and 20μF/m respectively? A. 100x103 m/s B. 100 m/s C. 10x103 m/s D. 100x106 m/s

Last Answer : A. 100x103 m/s

What type of transmission is radiated from an aircraft’s radio altimeter antenna? A. An amplitude modulated continuous wave B. A pulse position modulated UHF signal C. A differential phase shift keyed UHF signal D. A frequency modulated continuous wave

Description : What type of transmission is radiated from an aircraft’s radio altimeter antenna? A. An amplitude modulated continuous wave B. A pulse position modulated UHF signal C. A differential phase shift keyed UHF signal D. A frequency modulated continuous wave

Last Answer : D. A frequency modulated continuous wave

A pair of current-carrying conductors is not considered a transmission line unless it is at least ___ λ long at the signal frequency. A. 0.1 B. 0.3 C. 0.2 D. 0.4

Description : A pair of current-carrying conductors is not considered a transmission line unless it is at least ___ λ long at the signal frequency. A. 0.1 B. 0.3 C. 0.2 D. 0.4

Last Answer : A. 0.1

What do you call the phenomenon in digital circuits that describe the duration of time a digital signal passes a circuit? A. Transmission time B. Elapsed time C. Propagation delay D. Travel delay

Description : What do you call the phenomenon in digital circuits that describe the duration of time a digital signal passes a circuit? A. Transmission time B. Elapsed time C. Propagation delay D. Travel delay

Last Answer : C. Propagation delay

What is the first symbol of a radio signal transmission having an amplitude modulated signal carrier, double side band? A. C B. B C. H D. A

Description : What is the first symbol of a radio signal transmission having an amplitude modulated signal carrier, double side band? A. C B. B C. H D. A

Last Answer : D. A

Determine the dB gain of a receiving antenna which delivers a microvolt signal to a transmission line over that of an antenna that delivers a 20 microvolt signal under identical circumstances. A. 10 dB B. 6 dB C. 3 dB D. 8 dB

Description : Determine the dB gain of a receiving antenna which delivers a microvolt signal to a transmission line over that of an antenna that delivers a 20 microvolt signal under identical circumstances. A. 10 dB B. 6 dB C. 3 dB D. 8 dB

Last Answer : B. 6 dB

In indication signal for a handshake form the DCE to the DTE in response to an active condition for the request to send a signal. A. Data transmission B. Clear to send C. Receive data D. Data set ready

Description : In indication signal for a handshake form the DCE to the DTE in response to an active condition for the request to send a signal. A. Data transmission B. Clear to send C. Receive data D. Data set ready

Last Answer : B. Clear to send

Technical study which deals with production, transport and delivery of a quality signal from source to destination. A. Transmission system engineering B. Communication system engineering C. Telephony engineering D. Telegraphic engineering

Description : Technical study which deals with production, transport and delivery of a quality signal from source to destination. A. Transmission system engineering B. Communication system engineering C. Telephony engineering D. Telegraphic engineering

Last Answer : A. Transmission system engineering

What is the effect in over modulated amplitude modulated radio broadcasting transmission? A. Interference to adjacent channel B. Higher fidelity C. Increase noise D. Higher audio signal

Description : What is the effect in over modulated amplitude modulated radio broadcasting transmission? A. Interference to adjacent channel B. Higher fidelity C. Increase noise D. Higher audio signal

Last Answer : A. Interference to adjacent channel

What is the advantage of sidetone? A. High transmission efficiency B. Results to a strengthened signal C. No energy dissipation D. Assures that the telephone is working

Description : What is the advantage of sidetone? A. High transmission efficiency B. Results to a strengthened signal C. No energy dissipation D. Assures that the telephone is working

Last Answer : D. Assures that the telephone is working

Digital transmission provides a higher level of signal quality than analog transmission because A. repeaters regenerate digital pulses and remove distorstion B. digital signals are easier to sample than analog signals C. digital signals are smaller than analog signals and cannot easily be distorted D. analog signals are continuous and not easily distorted.

Description : Digital transmission provides a higher level of signal quality than analog transmission because A. repeaters regenerate digital pulses and remove distorstion B. digital signals are easier to sample than ... and cannot easily be distorted D. analog signals are continuous and not easily distorted.

Last Answer : A. repeaters regenerate digital pulses and remove distorstion

Quantization noise is caused by A. binary coding techniques B. serial transmission errors C. the synchronization between encoder and decoder D. the approximation of the quantized signal

Description : Quantization noise is caused by A. binary coding techniques B. serial transmission errors C. the synchronization between encoder and decoder D. the approximation of the quantized signal

Last Answer : D. the approximation of the quantized signal

What is meant by antenna gain? A. The final amplifier gain minus the transmission line losses (including any phasing lines present) B. The ratio of the amount of power produced by the antenna compared to the output power of the transmitter C. The ratio of the signal in the backward direction D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

Description : What is meant by antenna gain? A. The final amplifier gain minus the transmission line losses (including any phasing lines present) B. The ratio of the amount of power produced by the antenna ... D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

Last Answer : D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

ECE Board Exam March 1996 The expander in a companding device provides ___________. A. greater amplification for low signal levelsB. less amplification for low signal levels C. greater amplification for high signal levels D. lesser pressure for transmission

Description : ECE Board Exam March 1996 The expander in a companding device provides ___________. A. greater amplification for low signal levels B. less amplification for low signal levels C. greater amplification for high signal levels D. lesser pressure for transmission

Last Answer : B. less amplification for low signal levels

The transmission signal coding method of TI carrier is called a. Bipolar b. NRZ c. Manchester d. Binary

Description : The transmission signal coding method of TI carrier is called a. Bipolar b. NRZ c. Manchester d. Binary

Last Answer : Bipolar

The basic function of technology 'Blue tooth' is to allow a)Landline phone to mobile phone communication b)Signal transmission on mobile phones only c)Satellite television communication d)Wireless communication between equipment.

Description : The basic function of technology 'Blue tooth' is to allow a)Landline phone to mobile phone communication b)Signal transmission on mobile phones only c)Satellite television communication d)Wireless communication between equipment.

Last Answer : d)Wireless communication between equipment.

In_____ transmission, thephaseof the carrier signal is modulated to follow the changingvoltage level (amplitude) of the modulating signal. A) AM B) PM C) FM D) none of the above

Description : In_____ transmission, thephaseof the carrier signal is modulated to follow the changingvoltage level (amplitude) of the modulating signal. A) AM B) PM C) FM D) none of the above

Last Answer : PM

In_____ transmission, the frequency of the carrier signal is modulated to follow the changing voltage level (amplitude)of the modulating signal. The peak amplitude and phase of the carrier signal remainconstant,but as the amplitudeof the information signal changes, thefrequency of thecarrier changes correspondingly. A) AM B) PM C) FM D) none of the above

Description : In_____ transmission, the frequency of the carrier signal is modulated to follow the changing voltage level (amplitude)of the modulating signal. The peak amplitude and phase of the carrier signal remainconstant,but as ... of thecarrier changes correspondingly. A) AM B) PM C) FM D) none of the above

Last Answer : FM

In_____ transmission, thecarrier signal is modulated so that its amplitude varies with the changing amplitudes of the modulating signal. A) AM B) PM C) FM D) none of the above

Description : In_____ transmission, thecarrier signal is modulated so that its amplitude varies with the changing amplitudes of the modulating signal. A) AM B) PM C) FM D) none of the above

Last Answer : AM

Baseband transmission of adigital signal is possible only if wehave a ____channel. A) low-pass B) bandpass C) low rate D) high rate

Description : Baseband transmission of adigital signal is possible only if wehave a ____channel. A) low-pass B) bandpass C) low rate D) high rate

Last Answer : ow-pass

________ is a typeof transmission impairment in which the signal loses strength due to the different propagation speeds of each frequency that makes up the signal. A) Attenuation B) Distortion C) Noise D) Decibel

Description : ________ is a typeof transmission impairment in which the signal loses strength due to the different propagation speeds of each frequency that makes up the signal. A) Attenuation B) Distortion C) Noise D) Decibel

Last Answer : Distortion

________ is a typeof transmission impairment in which the signal loses strength due to theresistance of the transmission medium. A) Attenuation B) Distortion C) Noise D) Decibel

Description : ________ is a typeof transmission impairment in which the signal loses strength due to theresistance of the transmission medium. A) Attenuation B) Distortion C) Noise D) Decibel

Last Answer : Attenuation

The physical layer provides __________a. mechanical specifications of electrical connectors and cables b. electrical specification of transmission line signal level c. specification for IR over optical fiber d. all of the mentioned

Description : The physical layer provides __________ a. mechanical specifications of electrical connectors and cables b. electrical specification of transmission line signal level c. specification for IR over optical fiber d. all of the mentioned

Last Answer : d. all of the mentioned

Transport layer is implemented in _________ a. End system b. NIC c. Ethernet d. Signal transmission

Description : Transport layer is implemented in _________ a. End system b. NIC c. Ethernet d. Signal transmission

Last Answer : a. End system

The physical layer provides __________ A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal levelC. specification for IR over optical fiber D. all of the mentioned

Description : The physical layer provides __________ A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal level C. specification for IR over optical fiber D. all of the mentioned

Last Answer : D. all of the mentioned

What specifications does physical layer provides __________. A. mechanical specifications of electrical connectors and cablesB. electrical specification of transmission line signal level C. specification for IR over optical fiber D. all of the mentioned

Description : What specifications does physical layer provides __________. A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal level C. specification for IR over optical fiber D. all of the mentioned

Last Answer : D. all of the mentioned

The physical layer provides __________ a) mechanical specifications of electrical connectors and cables b) electrical specification of transmission line signal level c) specification for IR over optical fiber d) all of the mentioned

Description : The physical layer provides __________ a) mechanical specifications of electrical connectors and cables b) electrical specification of transmission line signal level c) specification for IR over optical fiber d) all of the mentioned

Last Answer : d) all of the mentioned

'Blue tooth' technology allows - 1) Landline phone to mobile phone communication 2) Signal transmission on mobile phones only 3) Wireless communication between equipments 4) Satellite television communication

Description : 'Blue tooth' technology allows - 1) Landline phone to mobile phone communication 2) Signal transmission on mobile phones only 3) Wireless communication between equipments 4) Satellite television communication

Last Answer : 3) Wireless communication between equipments

Radar altimeters use what type of transmission signal?

Description : Radar altimeters use what type of transmission signal?

Last Answer : Frequency modulated (fm).

In SONET, STS stands for: a. Synchronous Transport Signal b. Synchronous Transport System c. Synchronous Transmission Signal d. Synchronous Transmission System

Description : In SONET, STS stands for: a. Synchronous Transport Signal b. Synchronous Transport System c. Synchronous Transmission Signal d. Synchronous Transmission System

Last Answer : a. Synchronous Transport Signal

Rate of change of a signal on a transmission medium after encoding and modulation have occurred

Description : Rate of change of a signal on a transmission medium after encoding and modulation have occurred

Last Answer : baud rate

Used for transmission of PCM encoded time – division multiplexed digital signal.

Description : Used for transmission of PCM encoded time – division multiplexed digital signal.

Last Answer : T carriers

..................... is a type of transmission impairment in which the signal loses strength due to the resistance of the transmission medium. (A) Attenuation (B) Distortion (C) Noise (D) Decibel

Description : ..................... is a type of transmission impairment in which the signal loses strength due to the resistance of the transmission medium. (A) Attenuation (B) Distortion (C) Noise (D) Decibel

Last Answer : (A) Attenuation

Ideal transmission bandwidth of FM signal is

Description : Ideal transmission bandwidth of FM signal is

Last Answer : Ideal transmission bandwidth of FM signal is Infinite

The standard for long distance analog signal transmission in process control industry is

Description : The standard for long distance analog signal transmission in process control industry is (A) 4-20 mV (B) 0-20 mA (C) 4-20 mA (D) 0-5 V

Last Answer : The standard for long distance analog signal transmission in process control industry is 4-20 mA

Explain the left hemisphere area related to language?

Description : Explain the left hemisphere area related to language?

Last Answer : The first language area within the left hemisphere to be discovered is Broca's area, named after Paul Broca, who discovered the area while studying patients with aphasia, a language disorder. Broca's area doesn't ... the difference between "The boy was hit by the girl" and "The girl hit the boy."

Define the treatment of Muscular Dystrophy ?

Description : Define the treatment of Muscular Dystrophy ?

Last Answer : There is no specific treatment to stop or reverse any form of MD. Treatment may include physical therapy, respiratory therapy, speech therapy, orthopedic appliances used for support, and ... may need assisted ventilation to treat respiratory muscle weakness and a pacemaker for cardiac abnormalities.

Which area of the brain is related to language?

Description : Which area of the brain is related to language?

Last Answer : The two hemispheres are thought to contribute to the processing and understanding of language: the left hemisphere processes the linguistic meaning of prosody (or, the rhythm, stress, and intonation ... brains are capable of adapting to difficult circumstances, if the df.mage occurs early enough.

What are the Effects of brain damage?

Description : What are the Effects of brain damage?

Last Answer : A key source of information about the function of brain regions is the effects of damage to them. In humans, strokes have long provided a "natural laboratory" for studying the effects of brain ... often crosses into multiple regions of the brain, not along clear-cut borders, making it difficult to

Write a brief note on MEG?

Description : Write a brief note on MEG?

Last Answer : Apart from measuring the electric field around the skull it is possible to measure the magnetic field directly in a technique known asmagnetoencephalography (MEG). This technique has the same temporal ... dendrites oriented in a way that gives rise to detectable magnetic fields outside the skull.

Write a brief note on EEG?

Description : Write a brief note on EEG?

Last Answer : By placing electrodes on the scalp it is possible to record the summed electrical activity of the cortex, in a technique known aselectroencephalography (FEG). EEG measures mass changes in ... thousandths of a second. EEG recordings have good temporal resolution, but poor spatial resolution.