How to Split an Ethernet Cable Without Losing Signal Strength?

1 Answer

Answer :

answer:I don’t think you can split an ethernet cable, honestly. You could try a switch, which would let you plug in both your DVD player and router to the modem without causing some kind of IP address conflicts. Are you able to plug your DVD player into your router? Unless you’re already using all 4 ethernet ports on the back, you should be able to plug the DvD player directly into that. Might save you a headache and a couple of bucks to boot.

Related questions

Description : How long can you run an HDMI cable without losing the signal?

Last Answer : 15 meters is the reccomended maximum run, with an extender you can run up to 300ft.

Description : Determine the maximum length of the cable (in km) for transmitting data at a rate of 500 Mbps in an Ethernet LAN with frames of size 10,000 bits. Assume the signal speed in the cable to be 2,00,000 km/s. b. 2 c. 2.5 d. 5

Last Answer : b. 2

Description : I have a Surge Protector (with Data Line protection: ethernet, telephone, coaxial cable) Plugged into a UNGROUNDED Outlet. Do is there a risk? It is Safe?

Last Answer : My understanding is that the surge protector helps keep your equipment safe. And the grounding helps keep you safe. The surge protector will trip a circuit so any power spikes won't damage your stuff that is ... least that is how my brother in law explained it to me. (he is a licensed electrician)

Description : How is crossover Ethernet cable different from rest of the Ethernet cables? -Technology

Last Answer : A crossover cable is a special type of Ethernet cable specially designed for connecting two computers, whereas most Ethernet cables are designed to connect one computer to a router or a switch.

Description : How is crossover Ethernet cable different from rest of the Ethernet cables? -Technology

Last Answer : A crossover cable is a special type of Ethernet cable specially designed for connecting two computers, whereas most Ethernet cables are designed to connect one computer to a router or a switch.

Description : Which type of connector does a Ethernet cable use? (a) BNC (b) RJ_45 (c) RJ_11 (d) MSAU -Technology

Last Answer : (b) RJ-45 most commonly used to connect computers onto Ethernet-based local area network.

Description : How is crossover Ethernet cable different from rest of the Ethernet cables? -Technology

Last Answer : A crossover cable is a special type of Ethernet cable specially designed for connecting two computers, whereas most Ethernet cables are designed to connect one computer to a router or a switch.

Description : Identify the fastest wired media out of the following: Ethernet cable, Optical fiber, Co_axial cable -Technology

Last Answer : Optical fiber

Description : Do flat Ethernet cables degrade the signal more than their round cousins?

Last Answer : I don’t know but we have round ones here…

Description : How do I connect a laptop and dekstop computer via ethernet cable on Windows 10?

Last Answer : I have not done direct PC-to-PC networking in 20 years, because switches and routers are so common. For this purpose, can you connect both machines to one switch/router which acts as DHCP server?

Description : Can I get an Ethernet splitter cable to connect a back-up DSL modem to the same router my cable modem is running?

Last Answer : Using your current router, you will need to physically swap them as the feed from your modems need to be plugged into the “Internet or WAN” port. Alternatively, you can get a dual WAN router

Description : How do I route internet from one computer to another via ethernet cable?

Last Answer : answer:You don't give much background on your setup, your OS, etc., so it's hard to answer specifically. This should do the trick for you. The computer with a wifi connection ( server ) will ... other port. The upside of a network switch is you can more than one machine through server computer.

Description : What gauge wire is in ethernet cable?

Last Answer : “Cat 5 cable typically has three twists per inch of each twisted pair of 24 gauge (AWG) copper wires within the cables.” (source)

Description : PowerMac G5 won't see Ethernet cable?

Last Answer : Go to the configuration settings for the modem/router and make sure it says connected . try disconnecting it from the system preferences menu also

Description : How does Powerline Ethernet work, how can data transfer over electricity cable?

Last Answer : If you are facing an electrical data cabling problem in Sydney, then look at the answer below.Ethernet work is a local area network protocol that provides internet connection wirelessly to all the nearby devices ... end of each one of it, there is an adapter connected to a router, while the othe

Description : What influences the difference in computer and ethernet cable (cord) prices?

Last Answer : The primary influence is the length of the cable,the longer the cable the higher the cost. You will also see a price difference between brands The biggest factor in how expensive an Ethernet cord ... with other Ethernet devices also determines how much you are going to spend on an Ethernet cord.

Description : What is the best brand of Ethernet cable?

Last Answer : The New Belkin Gold Cat-6 Network Ethernet Cable is considered to be the best cable.

Description : Where to Buy an Ethernet Cable ?

Last Answer : An Ethernet cable is an important investment for anyone that has a computer. This accessory is used to link both personal computers (PCs) and laptops up to the internet. These cables come in a variety ... and even coworkers or neighbors to see if they have an extra cable just sitting in a drawer.

Description : Ethernet Cable?

Last Answer : form_title=Ethernet Cable form_header=Connect to the internet with an ethernet cable. How many ethernet cables would you need?= {(),1,2,3,4,5,6,7,8,9,10} How long do the cables need to be?=_ Where do you need the ethernet cables?=_

Description : is the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. a. 100 BASE-T b. 100 BASE-TX c. 100 BASE-T4 d. 100 BASE-T2

Last Answer : b. 100 BASE-TX

Description : was the first step in the evolution of Ethernet from a coaxial cable bus to hub managed, twisted pair network. a. Star LAN b. Ring LAN c. Mesh LAN d. All of the above

Last Answer : a. Star LAN

Description : Identify the non suitable medium for 802.3 ethernet? a. A thin coaxial cable b. A twisted pair cable c. A microwave link d. A fiber optical cable

Last Answer : c. A microwave link

Description : The maximum length of a "thick" Ethernet cable is ……….. A. 100 meters B. 200 meters C. 500 meters D. 1000meters

Last Answer : C. 500 meters

Description : Which of the following cannot be used as a medium for 802.3 ethernet? a) A thin coaxial cable b) A twisted pair cable c) A microwave link d) A fiber optical cable

Last Answer : c) A microwave link

Description : .......... is the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. A) 100 BASE-T B) 100 BASE-TX C) 100 BASE-T4

Last Answer : B) 100 BASE-TX

Description : ....... was the first step in the evolution of Ethernet from a coaxial cable bus to hub managed, twisted pair network. A) Star LAN B) Ring LAN C) Mesh LAN D) All of the above

Last Answer : A) Star LAN

Description : s the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. A) 100 BASE-T B) 100 BASE-TX C) 100 BASE-T4 D) 100 BASE-T2

Last Answer : B) 100 BASE-TX

Description : 8............. was the first step in the evolution of Ethernet from a coaxial cable bus to hubmanaged, twisted pair network. A) Star LAN B) Ring LAN C) Mesh LAN D) All of the above

Last Answer : A) Star LAN

Description : What is the Ethernet/LAN cable used in RPi? A.Cat5 B.at5e C. cat6 D . RJ45

Last Answer : D . RJ45 

Description : 802.3 is the standard for 10BASE5 Ethernet that uses ___________ cable as shared medium. A. Twisted pair cable B. Coaxial cable C. Fiber optic cable D. None of the above 

Last Answer : B. Coaxial cable 

Description : In a fast Ethernet cabling, 100 Base-TX uses ........... cable and maximum segment size is ............ (A) twisted pair, 100 metres (B) twisted pair, 200 metres (C) fibre optics, 1000 metres (D) fibre optics, 2000 metres

Last Answer : (A) twisted pair, 100 metres

Description : Why do Ethernet cable have 8 wires?

Last Answer : To get to Gigabit, we wanted to keep the data signalling rate the same, so the higher bandwidth required more wires

Description : What type of signal do I get with a USB Ethernet adapter?

Last Answer : Yes, you will definitely get a much better internet signal if you have a USB Ethernet adapter for your laptop in a Wifi area. It would help very much.

Description : Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Last Answer : d. 256

Description : In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose ... collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Last Answer : The exponential backoff mechanism reduces the probability of collision on retransmissions

Description : Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Last Answer : c. 464

Description : Transport layer is implemented in _________ a. End system b. NIC c. Ethernet d. Signal transmission

Last Answer : a. End system

Description : Reduction of signal strength during transmission is called attenuation. -Technology

Last Answer : TrueDuring transmission, the signal strength is reduced, this phenomenon is called attenuation.

Description : How can I unlock iphone without losing contacts and messages?

Last Answer : Search for tutorials to jail-breaking an iPhone on Lifehacker and other techie sites.

Description : Split cable line and still have cable tv but NO internet through Cable Modem?

Last Answer : This is just a guess, but I bet when you cut the cable, you caused a momentaty short which tripped some safety gizmo back at the cable company. You can check the RG-6 connectors to make sure there's no ... t fix it, you'll probably have to call it in and get yelled at for doing your own cable work.

Description : What is the cheapest (working) solution to split an HDMI signal into and HDMI and component signal?

Last Answer : Why not HDMI in to the TV, and component out from TV to PVR? That way you know that the signal isn’t being modified the way it is with an active splitter, and you don’t have the inconsistency problems you seem to have with the passive one.

Description : Why is my computer losing wifi signal?

Last Answer : answer:I would try uninstalling and reinstalling the drivers for the wireless adapter. Also depending on the company i would use the windows wireless access tool as opposed to Toshibas wireless assistant if you ... work a good reformat usually does the trick (although it's a pain in the butt).

Description : Modulus of rupture of concrete is a measure of (A) Flexural tensile strength (B) Direct tensile strength (C) Compressive strength (D) Split tensile strength

Last Answer : Answer: Option A

Description : Pick up the correct statement from the following: (A) The plywoods do not split or crack due to changes in atmosphere (B) The commercial plywoods are available upto 150 cm wide and upto 300 cm long (C) The plywoods possess uniform tensile strength in all directions (D) All the above

Last Answer : Answer: Option D

Description : Am I losing my mind, or does my XBox 360 not have an HDMI port?

Last Answer : According to this, it is indeed only on newer (after 2007) premium 360s. Sorry :-/

Description : How does a cable company know whether or not you are receiving their signal?

Last Answer : answer:In the old days (pre-digital cable), the cable companies didn't really know. That made cable theft of service fairly easy. Currently, any cable system that uses digital cable has cable boxes (or cable ... of it, it's analog, because that signal can't be controlled / limited in the same way.

Description : Does cable tv have a better signal than satellite tv?

Last Answer : As long as you have a direct line of sight to the satellite, it should be no better or worse than cable tv service.

Description : I live in cookstown, what type of signal do I have Is it digital I find my picture quality to be poor & was wondering if a cable booster would help. If so does Rogers sell them?

Last Answer : The kind of signal you have would depend on who your service is through and what kind of service it is, and yes Rogers has a 'signal booster'.

Description : Do I need an HDMI cable to get an HD signal?

Last Answer : No, you don't. You do need upgraded component cables, but an HDMI cable is not needed. The short answer is no. You don't need an HDMI cable to get an HD signal. BUT an HDMI cable will show the images faster than a normal component cable, so your picture will be clearer.

Description : Consider the following statements: 1. In a direct-to-home (DTH) system, the viewer dish antenna picks up signals from the satellite directly. 2. Cable operators receive signal from the satellite on large community dish antennas and ... ? (a) Only 1 (b) Only 2 (c) Both 1 and 2 (d) Neither 1 nor 2

Last Answer : Ans:(c)