Which of the following will NOT be used in determination of vertical dimension? a. Aesthetic b. Phonetics c. Gothic arch tracing. d. Swallowing

Which of the following will NOT be used in determination of vertical dimension?
 a. Aesthetic
 b. Phonetics
 c. Gothic arch tracing.  
 d. Swallowing
by

1 Answer

Answer :

c. Gothic arch tracing.
by

Related questions

Which of the following will NOT be used in the determination of vertical dimension: A. Aesthetic B. Phonetics C. Gothic arch tracing D. Swallowing

Description : Which of the following will NOT be used in the determination of vertical dimension: A. Aesthetic B. Phonetics C. Gothic arch tracing D. Swallowing

Last Answer : C. Gothic arch tracing

The MOST common consequence arising from premature extraction of deciduous molars is: A. Loss of arch length B. Loss of speech sound C. Loss of facial contour D. Loss of vertical height E. Loss of free way space

Description : The MOST common consequence arising from premature extraction of deciduous molars is: A. Loss of arch length B. Loss of speech sound C. Loss of facial contour D. Loss of vertical height E. Loss of free way space

Last Answer : A. Loss of arch length

Jaw relations for edentulous patient have been established. The maxillary cast has been mounted on the articulator without face-bow and you decide to increase the occlusal vertical dimension by 4 mm. This will necessitate, A. Opening the articulator 4 mm B. A new centric relation record C. Changes in the condylar guide settings D. Increase in the vertical dimension

Description : Jaw relations for edentulous patient have been established. The maxillary cast has been mounted on the articulator without face-bow and you decide to increase the occlusal vertical dimension by 4 mm ... record C. Changes in the condylar guide settings D. Increase in the vertical dimension

Last Answer : B. A new centric relation record

In complete dentures, cheek biting is most likely a result of: A. Reduced Overjet of posterior teeth B. Increased vertical dimension C. Teeth have large cusp inclines

Description : In complete dentures, cheek biting is most likely a result of: A. Reduced Overjet of posterior teeth B. Increased vertical dimension C. Teeth have large cusp inclines

Last Answer : A. Reduced Overjet of posterior teeth

What is TRUE about vertical dimension: A. Does not change for the whole life B. Decreases when head is tilted back (is the opposite and if is tilted forward decreases, patient supine reduced, stress and pain also reduced) C. Increases when a lower denture is placed in mouth

Description : What is TRUE about vertical dimension:  A. Does not change for the whole life   B. Decreases when head is tilted back (is the opposite and if is tilted forward decreases, patient  supine reduced, stress and pain also reduced)  C. Increases when a lower denture is placed in mouth 

Last Answer : C. Increases when a lower denture is placed in mouth 

Angular cheilitis in edentulous patient with complete denture is a result of: A. Deficiency of Rivoflavin vitamin B2 B. Low vertical dimension

Description : Angular cheilitis in edentulous patient with complete denture is a result of: A. Deficiency of Rivoflavin vitamin B2 B. Low vertical dimension

Last Answer : B. Low vertical dimension

Jaw relation of an edentulous patient has been established. The maxillary cast has been mounted on an articulator without a face bow. You decide to increase the occlusal vertical dimension by 4mm this will necessitate, A. Opening the articulator 4mm B. A new centric relation to be recorded C. A change in the condylar guide settings D. An increase in the rest vertical dimension

Description : Jaw relation of an edentulous patient has been established. The maxillary cast has been mounted on an articulator without a face bow. You decide to increase the occlusal vertical dimension by 4mm this ... C. A change in the condylar guide settings D. An increase in the rest vertical dimension

Last Answer : B. A new centric relation to be recorded

To produce a stable correction of an upper labial segment in lingual crossbite; it is essential to:** A. Use fixed appliances B. Have adequate overbite C. Treat during growth D. Use posterior capping E. Increase vertical dimension

Description : To produce a stable correction of an upper labial segment in lingual crossbite; it is essential to:** A. Use fixed appliances B. Have adequate overbite C. Treat during growth D. Use posterior capping E. Increase vertical dimension

Last Answer : B. Have adequate overbite

If aesthetic is not a concern what is the first thing to do to treat soreness under dentures, A. Take the denture off for a week B. Rinse the denture in nystatin C. Apply tissue conditioner

Description : If aesthetic is not a concern what is the first thing to do to treat soreness under dentures, A. Take the denture off for a week B. Rinse the denture in nystatin C. Apply tissue conditioner

Last Answer : A. Take the denture off for a week

Etching techniques are used always to: A. minimise the leakage of restorations B. for aesthetic considerations

Description : Etching techniques are used always to: A. minimise the leakage of restorations B. for aesthetic considerations

Last Answer : A. minimise the leakage of restorations

The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. the inter occlusal distance will be physiologically acceptable after treatment B. there will be sufficient tooth bulk in the abutment teeth for proper retention of the crowns C. at least two third of the original alveolar process will remain for adequate periodontal support D. the aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Description : The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. the inter occlusal distance will be physiologically ... the aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Last Answer : A. the inter occlusal distance will be physiologically acceptable after treatment

Why would you decide to replace the anterior missing teeth for partial denture using bridge: A. Aesthetic B. Overjet C. Overbite

Description : Why would you decide to replace the anterior missing teeth for partial denture using bridge: A. Aesthetic B. Overjet C. Overbite

Last Answer : A. Aesthetic

The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. The inter occlusal distance will be physiologically acceptable after treatment B. There will be sufficient tooth bulk in the abutment teeth for proper retention of the crowns C. At least two third of the original alveolar process will remain for adequate periodontal support D. The aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Description : The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. The inter occlusal distance will be physiologically ... . The aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Last Answer : A. The inter occlusal distance will be physiologically acceptable after treatment

Why is the pointed arch in gothic architecture structurally more stable than the rounded arch used earlier?

Description : Why is the pointed arch in gothic architecture structurally more stable than the rounded arch used earlier?

Last Answer : its direct weight downward into the ground.....

Swallowing will aid in the diagnosis of: A. Branchial cyst B. Thyroglossal duct cyst C. Ranula D. Retention cyst E. Globulomaxillary cyst

Description : Swallowing will aid in the diagnosis of: A. Branchial cyst B. Thyroglossal duct cyst C. Ranula D. Retention cyst E. Globulomaxillary cyst

Last Answer : B. Thyroglossal duct cyst

A 7 years-old child has class I malocclusion, slight version of maxillary class III, adequate arch length. What is your management: A. Oral screen B. Head cap therapy C. Inclined plane on mandibular anterior teeth D. Hawley plate E. Expansion screw plate

Description : A 7 years-old child has class I malocclusion, slight version of maxillary class III, adequate arch length. What is your management: A. Oral screen B. Head cap therapy C. Inclined plane on mandibular anterior teeth D. Hawley plate E. Expansion screw plate

Last Answer : C. Inclined plane on mandibular anterior teeth

A lateral incisor labial to the arch needs to be restored in normal alignment with PFM retraction. How will the tooth appear: A. Too wide B. Too short C. To narrow D. To long

Description : A lateral incisor labial to the arch needs to be restored in normal alignment with PFM retraction. How will the tooth appear: A. Too wide B. Too short C. To narrow D. To long

Last Answer : C. To narrow

The best space maintainer is: A. Lingual holding arch B. Pulpectomised primary tooth C. Band and loop maintainer

Description : The best space maintainer is: A. Lingual holding arch B. Pulpectomised primary tooth C. Band and loop maintainer

Last Answer : B. Pulpectomised primary tooth

The MOST common consequence arising from premature extraction of deciduous molar is: A. Loss of arch length B. Loss of speech sound C. Loss of facial contour

Description : The MOST common consequence arising from premature extraction of deciduous molar is: A. Loss of arch length B. Loss of speech sound C. Loss of facial contour

Last Answer : A. Loss of arch length

A labially displaced anterior tooth is restored with a gold core porcelain jacket crown so that it is in line with the arch; the crown will appears: A. Short B. Long C. Narrow D. Wide

Description : A labially displaced anterior tooth is restored with a gold core porcelain jacket crown so that it is in line with the arch; the crown will appears: A. Short B. Long C. Narrow D. Wide

Last Answer : C. Narrow

“The tracing of requirements for a test level through the layers of a test documentation” done by A. Horizontal tracebility B. Depth tracebility C. Vertical tracebility D. Horizontal & Vertical tracebilities

Description : “The tracing of requirements for a test level through the layers of a test documentation” done by A. Horizontal tracebility B. Depth tracebility C. Vertical tracebility D. Horizontal & Vertical tracebilities

Last Answer : A. Horizontal tracebility

To minimize the load on a free-end saddle partial denture: (distal extension saddle) A. Use teeth with narrow Buccal-Lingual dimension B. Use mucco-compressive impression

Description : To minimize the load on a free-end saddle partial denture: (distal extension saddle) A. Use teeth with narrow Buccal-Lingual dimension B. Use mucco-compressive impression

Last Answer : B. Use mucco-compressive impression

The diagnosis of ortho cases is by: A. Measurement of cranium size B. Recording profile C. The relation of dentition and the jaw to the cranium D. Determination of overbite size E. Determination of jaw size

Description : The diagnosis of ortho cases is by: A. Measurement of cranium size B. Recording profile C. The relation of dentition and the jaw to the cranium D. Determination of overbite size E. Determination of jaw size

Last Answer : C. The relation of dentition and the jaw to the cranium

Why isn't "phonetics" spelled phonetically?

Description : Why isn't "phonetics" spelled phonetically?

Last Answer : The same sort of miserable cruelty that puts an “s” in lisp. (Also phonemes)

What is the meaning of Phonetics ?

Description : What is the meaning of Phonetics ?

Last Answer : Phonetics means phonetics.

What is phonetics?

Description : What is phonetics?

Last Answer : Answer: Phonetics is the precise study of human speech sounds - how they are produced, how they are transmitted and how they are heard.

On X-ray, the buccal roots of 16 is considerably elongated; this is a result of, A. Too great vertical angulation B. Inadequate vertical angulation C. Excessive object film distance

Description : On X-ray, the buccal roots of 16 is considerably elongated; this is a result of, A. Too great vertical angulation B. Inadequate vertical angulation C. Excessive object film distance

Last Answer : B. Inadequate vertical angulation

The vertical incision of a mucoperiostal flap should: A. Always extend to the alveolar mucoperiostal B. Bisect the middle of gingival papillae C. Be at the right angle of the tooth

Description : The vertical incision of a mucoperiostal flap should: A. Always extend to the alveolar mucoperiostal B. Bisect the middle of gingival papillae C. Be at the right angle of the tooth

Last Answer : A. Always extend to the alveolar mucoperiostal

.In an X ray the mesio buccal root of upper first molars is elongated because of: A. Mesio angular horizontal B. Too big vertical angulation C. Too small vertical angulation D. High angulation

Description : .In an X ray the mesio buccal root of upper first molars is elongated because of: A. Mesio angular horizontal B. Too big vertical angulation C. Too small vertical angulation D. High angulation

Last Answer : C. Too small vertical angulation

The incisal guidance on the articulator is the:** A. Mechanical equivalent of horizontal and vertical overlap of upper and lower incisors B. Mechanical equivalent of the compensating curve C. Same as condylar guidance D. Estimated by the equation: Incisal guidance = 1/8 of condylar guidance

Description : The incisal guidance on the articulator is the:** A. Mechanical equivalent of horizontal and vertical overlap of upper and lower incisors B. Mechanical equivalent of the compensating curve C. Same as condylar guidance D. Estimated by the equation: Incisal guidance = 1/8 of condylar guidance

Last Answer : A. Mechanical equivalent of horizontal and vertical overlap of upper and lower incisors

In periodontitis, the most common finding is, (Main feature of suprabony pocket) A. Horizontal bone resorption B. Vertical bone resorption C. Angular bone loss

Description : In periodontitis, the most common finding is, (Main feature of suprabony pocket) A. Horizontal bone resorption B. Vertical bone resorption C. Angular bone loss

Last Answer : A. Horizontal bone resorption

A tooth under occlusal trauma shows A. Bone resorption B. Necrosis of the pulp C. Hypercementosis D. Triangulation Vertical defects occur adjacent to a tooth and usually in the form of a triangular area of missing bone, known as triangulation E. All of the above

Description : A tooth under occlusal trauma shows A. Bone resorption B. Necrosis of the pulp C. Hypercementosis D. Triangulation Vertical defects occur adjacent to a tooth and usually in the form of a triangular area of missing bone, known as triangulation E. All of the above

Last Answer : E. All of the above

What is the common appearance of vertical tooth fracture?* A. Perio abscess like appearance B. Displacement of fragments

Description : What is the common appearance of vertical tooth fracture?* A. Perio abscess like appearance B. Displacement of fragments

Last Answer : A. Perio abscess like appearance

The vertical reaction for the arch is (A) wa/2l (B) wl/a (C) wa/l (D) wa²/2

Description : The vertical reaction for the arch is  (A) wa/2l (B) wl/a (C) wa/l (D) wa²/2

Last Answer : (A) wa/2l

Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head or trib arch (C) The levelling screws are used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Description : Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head ... used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Last Answer : (D) All the above

The vertical distance between the springing line and highest point of the inner curve of an arch is known as (A) Intrados (B) Rise (C) Spandril (D) Extrados

Description : The vertical distance between the springing line and highest point of the inner curve of an arch is known as (A) Intrados (B) Rise (C) Spandril (D) Extrados

Last Answer : Answer: Option B

Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio (above the minimum reflux ratio), the fixed cost of the distillation column first increases and then decreases (C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Description : Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio ( ... (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Last Answer : C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux

Do you think the CDC/Government did a good job on tracing the meningitis outbreak?

Description : Do you think the CDC/Government did a good job on tracing the meningitis outbreak?

Last Answer : I know someone who has been officially informed that her shots from that lab, and is waiting to hear if the lot numbers are from the bad batch. I think they should have been able to narrow it down by now, ... I don't know if that's the lab, the CDC or the clinic that is responsible for the delay.

Is skip tracing training really help to find a people in any city as well as country?

Description : Is skip tracing training really help to find a people in any city as well as country?

Last Answer : Yes, it really helps you to trace any people. There are lots of tools that are available through which you can easily trace a people in a city or country. In skip tracer training, you have to ... Social media such as Facebook, Google Plus, Linkedin, and others. 3. Reverse sites. 4. Email checkers.

Calvin used algae in his experiment for tracing out the path of carbon. The algae used were

Description : Calvin used algae in his experiment for tracing out the path of carbon. The algae used were

Last Answer : Calvin used algae in his experiment for tracing out the path of carbon. The algae used ... . Chlorococcum and Chorella D. Chlorococuum and Scenedesmus

What happens when light hits tracing paper?

Description : What happens when light hits tracing paper?

Last Answer : What is the answer ?

What do you mean by Blood Tracing ?

Description : What do you mean by Blood Tracing ?

Last Answer : Blood Tracing is the process of tracing of the all capillaries, veins, arteries going from the right ventricle to the abdominal visceral organs and back up to the heart.

Why are there five tracing levels in System.Diagnostics.TraceSwitcher?

Description : Why are there five tracing levels in System.Diagnostics.TraceSwitcher?

Last Answer : The tracing dumps can be quite verbose. For applications that are constantly running you run the risk of overloading the machine and the hard drive. Five levels range from None to Verbose, allowing you to fine-tune the tracing activities.

Why are there five tracing levels in System.Diagnostics.TraceSwitcher?

Description : Why are there five tracing levels in System.Diagnostics.TraceSwitcher? 

Last Answer : The tracing dumps can be quite verbose. For applications that are constantly running you run the risk of overloading the machine and the hard drive. Five levels range from None to Verbose, allowing you to fine-tune the tracing activities.

HTTP stands for? a. Hyper terminal tracing program b. Hypertext tracing protocol c. Hypertext transfer protocol d. Hypertext transfer program

Description : HTTP stands for? a. Hyper terminal tracing program b. Hypertext tracing protocol c. Hypertext transfer protocol d. Hypertext transfer program

Last Answer : c. Hypertext transfer protocol

Which of the following ECG waveforms characterizes conduction of an electrical impulse through the left ventricle? a) QRS complex The QRS complex represents ventricular depolarization b) P wave The P wave is an ECG characteristic reflecting conduction of an electrical impulse through the atria. c) PR interval The PR interval is a component of an ECG tracing reflecting conduction of an electrical impulse through the AV node. d) QT interval The QT interval is an ECG characteristic reflecting the time from ventricular depolarization to repolarization.

Description : Which of the following ECG waveforms characterizes conduction of an electrical impulse through the left ventricle? a) QRS complex The QRS complex represents ventricular depolarization b) P ... QT interval is an ECG characteristic reflecting the time from ventricular depolarization to repolarization.

Last Answer : a) QRS complex The QRS complex represents ventricular depolarization

In a solution of the three-point problem in plane table surveying, the converging of error is attained through : (a) Concyclic concept (b) Bessel’s method (c) Triangle of error (d) Tracing paper method

Description : In a solution of the three-point problem in plane table surveying, the converging of error is attained through : (a) Concyclic concept (b) Bessel’s method (c) Triangle of error (d) Tracing paper method

Last Answer : (c) Triangle of error

What is a good method of steam tracing large vessels?

Description : What is a good method of steam tracing large vessels?

Last Answer : One common approach to heat tracing projects is a platecoil concept. If you are unfamiliar with this type of equipment, you should visit one of the links below. Depending on your tank(s) or ... ). This book contains a lot of information on steam tracing, best practices, traps, regulating valves.

Which of the following is not applicable to liquid fuels? a) the viscosity of a liquid fuel is a measure of its internal resistance to flow. b) the viscosity of all liquid fuels decreases with increase in its temperature c) higher the viscosity of liquid fuels, higher will be its heating value d) viscous fuels need heat tracing

Description : Which of the following is not applicable to liquid fuels? a) the viscosity of a liquid fuel is a measure of its internal resistance to flow. b) the viscosity of all liquid fuels decreases with ... the viscosity of liquid fuels, higher will be its heating value d) viscous fuels need heat tracing

Last Answer : c) higher the viscosity of liquid fuels, higher will be its heating value