The greater the pressure gradient the: a. Closer the isobars and the lower the temperatures b. Further the isobars will be apart and the higher the temperature c. Closer the isobars and the stronger the wind d. Further the isobars will be apart and the weaker the wind

The greater the pressure gradient the:  
a. Closer the isobars and the lower the temperatures  
b. Further the isobars will be apart and the higher the temperature  
c. Closer the isobars and the stronger the wind
d. Further the isobars will be apart and the weaker the wind
by

1 Answer

Answer :

c. Closer the isobars and the stronger the wind
by

Related questions

The greater the pressure gradient the: a. Closer the isobars and the lower the temperatures b. Further the isobars will be apart and the higher the temperature c. Closer the isobars and the stronger the wind

Description : The greater the pressure gradient the:  a. Closer the isobars and the lower the temperatures  b. Further the isobars will be apart and the higher the temperature  c. Closer the isobars and the stronger the wind

Last Answer : c. Closer the isobars and the stronger the wind

The higher the resolution of a monitor, the _________ A. larger the pixels. B. closer together the pixels. C. further apart the pixels. D. less clear the screen is.

Description : The higher the resolution of a monitor, the _________ A. larger the pixels. B. closer together the pixels. C. further apart the pixels. D. less clear the screen is.

Last Answer : B. closer together the pixels.

The isobars drawn on a surface weather chart represent lines of equal pressure: a. At flight level b. At height of observatory c. At a determined density altitude d. Reduced to sea level

Description : The isobars drawn on a surface weather chart represent lines of equal pressure: a. At flight level b. At height of observatory c. At a determined density altitude d. Reduced to sea level

Last Answer : d. Reduced to sea level

.Which of the following statements is correct about an aqueous solution of an acid and of a base? (i) Higher the pH, stronger the acid (ii) Higher the pH, weaker the acid (iii) Lower the pH, stronger the base (iv) Lower the pH, weaker the base (a) (i) and (iii) (b) (ii) and (iii (c) (i) and (iv) (d) (ii) and (iv)

Description : .Which of the following statements is correct about an aqueous solution of an acid and of a base? (i) Higher the pH, stronger the acid (ii) Higher the pH, weaker the acid (iii) Lower the pH, stronger the base (iv) Lower the pH, ... (i) and (iii) (b) (ii) and (iii (c) (i) and (iv) (d) (ii) and (iv)

Last Answer : (d) (ii) and (iv)

Shortly after take-off, the altitude of the aeroplane suffers an abrupt pitch-up and IAS rapidly decreases followed quickly by a decrease in altitude. Engine indications are normal. You should suspect what and what should you do? a. Marked temperature drop; apply full power b. Loss of head wind or an increase in tail wind; apply full power c. Incipient engine failure (ignore instruments); lower the nose to gain airspeed d. Local clear air turbulence; reduce speed to VRA and ride it out

Description : Shortly after take-off, the altitude of the aeroplane suffers an abrupt pitch-up and IAS rapidly decreases followed quickly by a decrease in altitude. Engine indications are normal. You should suspect what ... to gain airspeed d. Local clear air turbulence; reduce speed to VRA and ride it out

Last Answer : b. Loss of head wind or an increase in tail wind; apply full power

Technology: Has it brought US closer or further apart?

Description : Technology: Has it brought US closer or further apart?

Last Answer : Has it brought us physically closer? No. It seems that face-to-face human interaction time might have decreased with the advent of the telephone and now the Internet. But we can't forget ... be more difficult or inconvenient but you learn more about yourself when dealing with people in real life.

What causes wind? a. Difference in pressure b. Rotation of the earth c. Frontal systems d. Difference in temperature

Description : What causes wind? a. Difference in pressure b. Rotation of the earth c. Frontal systems d. Difference in temperature

Last Answer : a. Difference in pressure

For take-off performance calculations, what is taken into account? a. OAT, pressure altitude, wind, weight b. Standard temperature, altitude, wind, weight c. Standard altitude, standard temperature, wind, weight d. Standard temperature, pressure altitude, wind, weight

Description : For take-off performance calculations, what is taken into account? a. OAT, pressure altitude, wind, weight b. Standard temperature, altitude, wind, weight c. Standard altitude, standard temperature, wind, weight d. Standard temperature, pressure altitude, wind, weight

Last Answer : a. OAT, pressure altitude, wind, weight

Where is wind shear the greatest? a. Near a strong low level inversion and in the region of a thunderstorm b. Near a valley with wind speeds greater than 35kts c. On the windward side of a mountain d. When the wind is greater than 35kts

Description : Where is wind shear the greatest? a. Near a strong low level inversion and in the region of a thunderstorm b. Near a valley with wind speeds greater than 35kts c. On the windward side of a mountain d. When the wind is greater than 35kts

Last Answer : a. Near a strong low level inversion and in the region of a thunderstorm

What is the recommended technique to counter the loss of airspeed and resultant lift from wind shear? a. Maintain, or increase, pitch attitude and accept the lower-than-normal airspeed indications b. Lower the pitch attitude and regain lost airspeed c. Avoid overstressing aircraft, pitch to stick shaker, and apply maximum power d. Accelerate the aircraft to prevent a stall by sacrificing altitude

Description : What is the recommended technique to counter the loss of airspeed and resultant lift from wind shear? a. Maintain, or increase, pitch attitude and accept the lower-than-normal airspeed ... shaker, and apply maximum power d. Accelerate the aircraft to prevent a stall by sacrificing altitude

Last Answer : c. Avoid overstressing aircraft, pitch to stick shaker, and apply maximum power

Higher pitch of the roof (i) Results in stronger roof (ii) Results in weaker roof (iii) Requires more covering material (iv) Requires less covering material The correct answer is (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Description : Higher pitch of the roof (i) Results in stronger roof (ii) Results in weaker roof (iii) Requires more covering material (iv) Requires less covering material The correct answer is (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Last Answer : Option A

What true airspeed and angle of attack should be used to generate the same amount of lift as altitude is increased? a. A higher true airspeed for any given angle of attack b. The same true airspeed and angle of attack c. A lower true airspeed and higher angle of attack d. A constant angle of attack and true airspeed

Description : What true airspeed and angle of attack should be used to generate the same amount of lift as altitude is increased? a. A higher true airspeed for any given angle of attack b. The same true ... c. A lower true airspeed and higher angle of attack d. A constant angle of attack and true airspeed

Last Answer : a. A higher true airspeed for any given angle of attack

What flight condition should be expected when an aircraft leaves ground effect? a. A decrease in parasite drag permitting a lower angle of attack b. An increase induced drag and a requirement for a higher angle of attack c. An increase in dynamic stability d. A decrease in induced drag requiring a smaller angle of attack

Description : What flight condition should be expected when an aircraft leaves ground effect? a. A decrease in parasite drag permitting a lower angle of attack b. An increase induced drag and a requirement ... increase in dynamic stability d. A decrease in induced drag requiring a smaller angle of attack

Last Answer : b. An increase induced drag and a requirement for a higher angle of attack

At a constant mass and altitude, a lower airspeed requires: a. More thrust and a lower coefficient of lift b. Less thrust and a lower coefficient of lift c. More thrust and a lower coefficient of drag d. A higher coefficient of lift

Description : At a constant mass and altitude, a lower airspeed requires: a. More thrust and a lower coefficient of lift b. Less thrust and a lower coefficient of lift c. More thrust and a lower coefficient of drag d. A higher coefficient of lift

Last Answer : d. A higher coefficient of lift

In the event of cabin depressurization, the actions of the pilot will be to: a. Immediately commence a diversion to a suitable alternate b. Increase engine power to provide additional airflow to the pressurization systems c. Maintain the aeroplane altitude to prevent further damage to the airframe by over loading of the structure d. Commence a descent to an altitude where the supplemental oxygen supply is sufficient for all crew and passengers

Description : In the event of cabin depressurization, the actions of the pilot will be to: a. Immediately commence a diversion to a suitable alternate b. Increase engine power to provide additional ... a descent to an altitude where the supplemental oxygen supply is sufficient for all crew and passengers

Last Answer : d. Commence a descent to an altitude where the supplemental oxygen supply is sufficient for all crew and passengers

A shuttle valve will: a. Allow the accumulator to be emptied after engine shut down b. Reduce pump loading when normal system pressure is reached c. Automatically switched to a more appropriate source of hydraulic supply d. Operate on a rising pressure, higher than the Full Flow relief valve

Description : A shuttle valve will: a. Allow the accumulator to be emptied after engine shut down b. Reduce pump loading when normal system pressure is reached c. Automatically switched to a more appropriate source of hydraulic supply d. Operate on a rising pressure, higher than the Full Flow relief valve

Last Answer : c. Automatically switched to a more appropriate source of hydraulic supply

A pilot suffering from decompression sickness should: a. Descend to a lower level where the symptoms will disappear and continue the flight at this or a lower level b. Decrease the cabin pressure to relieve the symptoms c. Continue the flight at a lower altitude and carry out exercises to relieve the pain in the affected site d. Land as soon as possible and seek medical assistance

Description : A pilot suffering from decompression sickness should: a. Descend to a lower level where the symptoms will disappear and continue the flight at this or a lower level b. Decrease the cabin pressure ... the pain in the affected site d. Land as soon as possible and seek medical assistance

Last Answer : d. Land as soon as possible and seek medical assistance

Isotropic turbulence occurs (A) Where there is no velocity gradient (B) At higher temperatures (C) Only in Newtonian fluids (D) None of theseIsotropic turbulence occurs(A) Where there is no velocity gradient(B) At higher temperatures(C) Only in Newtonian fluids(D) None of these

Description : Isotropic turbulence occurs (A) Where there is no velocity gradient (B) At higher temperatures (C) Only in Newtonian fluids (D) None of these

Last Answer : (A) Where there is no velocity gradient

Which wind-shear condition results in a loss of airspeed? a. Decreasing headwind or tailwind b. Increasing headwind and decreasing tailwind c. Decreasing headwind and increasing tailwind d. Increasing headwind or tailwind

Description : Which wind-shear condition results in a loss of airspeed? a. Decreasing headwind or tailwind b. Increasing headwind and decreasing tailwind c. Decreasing headwind and increasing tailwind d. Increasing headwind or tailwind

Last Answer : c. Decreasing headwind and increasing tailwind

A constant rate of climb in an aeroplane is determined by: a. Wind speed b. The aircraft weight c. Excess engine power d. Excess airspeed

Description : A constant rate of climb in an aeroplane is determined by: a. Wind speed b. The aircraft weight c. Excess engine power d. Excess airspeed

Last Answer : c. Excess engine power

Which of the following conditions is worst with regard to wake vortex turbulence? a. Lights winds near the surface b. Strong winds near the surface c. Marked vertical wind shear d. Marked atmospheric turbulence near the ground

Description : Which of the following conditions is worst with regard to wake vortex turbulence? a. Lights winds near the surface b. Strong winds near the surface c. Marked vertical wind shear d. Marked atmospheric turbulence near the ground

Last Answer : a. Lights winds near the surface

With what a met phenomenon is wind shear most associated? a. Thunderstorms b. Passage of a warm front c. Tropical revolving storms d. Standing mountain waves

Description : With what a met phenomenon is wind shear most associated? a. Thunderstorms b. Passage of a warm front c. Tropical revolving storms d. Standing mountain waves

Last Answer : a. Thunderstorms

A flight is to depart from an airport with runway 09 and 27. Surface wind is 270/05; an inversion is reported at 300 feet with turbulence and wind shear. The wind just above the inversion is 090/30. What is the safest departure procedure? a. Take-off is not possible under these conditions b. Depart on runway 09 with a tailwind c. Depart runway 27 with maximum throttle during the passage through the inversion d. Depart runway 27 with as steep an ascent as possible

Description : A flight is to depart from an airport with runway 09 and 27. Surface wind is 270/05; an inversion is reported at 300 feet with turbulence and wind shear. The wind just above the ... throttle during the passage through the inversion d. Depart runway 27 with as steep an ascent as possible

Last Answer : b. Depart on runway 09 with a tailwind

ATC will only report wind as gusting if: a. Gust speed exceeds mean speed by >15kts b. Gusts to over 25kts c. Gusts exceed mean speed by 10kts d. Gusts to under 25kts

Description : ATC will only report wind as gusting if: a. Gust speed exceeds mean speed by >15kts b. Gusts to over 25kts c. Gusts exceed mean speed by 10kts d. Gusts to under 25kts

Last Answer : c. Gusts exceed mean speed by 10kts

A flight is planned from L to M, distance 850 nm. Wind component out is 35 kt(TWC), TAS 450kt. Mean fuel flow out is 2500kg/hr, mean fuel flow inbound is 1900kg/hr and the fuel available is 6000kg. The time and distance to PSR is: a. 1hr 30 min, 660nm b. 1hr 30 min, 616nm c. 1hr 15 min, 606nm d. 1hr 16 min, 616nm

Description : A flight is planned from L to M, distance 850 nm. Wind component out is 35 kt(TWC), TAS 450kt. Mean fuel flow out is 2500kg/hr, mean fuel flow inbound is 1900kg/hr and the fuel available is 6000kg. The time ... 30 min, 660nm b. 1hr 30 min, 616nm c. 1hr 15 min, 606nm d. 1hr 16 min, 616nm

Last Answer : d. 1hr 16 min, 616nm

After flying for 16 minutes at 100kt TAS with a 20kt tail wind, you have to return to the airfield of departure. You will arrive after: a. 10 min 40 sec b. 20 min c. 24 min d. 16 min

Description : After flying for 16 minutes at 100kt TAS with a 20kt tail wind, you have to return to the airfield of departure. You will arrive after: a. 10 min 40 sec b. 20 min c. 24 min d. 16 min

Last Answer : c. 24 min

If the track on an instrument departure is published, the pilot is expected to: a. Correct for the correct wind so as to stay within controlled airspace b. Ask ATC for another heading to steer correcting for wind c. Ignore the wind and proceed with a heading equal to the track d. Ask ATC for permission to correct heading for wind

Description : If the track on an instrument departure is published, the pilot is expected to: a. Correct for the correct wind so as to stay within controlled airspace b. Ask ATC for another heading to steer ... proceed with a heading equal to the track d. Ask ATC for permission to correct heading for wind

Last Answer : a. Correct for the correct wind so as to stay within controlled airspace

What's stronger than a boulder, but weaker than a flying insect? -Riddles

Description : What's stronger than a boulder, but weaker than a flying insect? -Riddles

Last Answer : Gravity

Assertion: `p`-nitrophenol is a stronger acid than `o`-nitrophenol. Reason: Intramolecular hydrogen bonding makes the `o`-isomer weaker than the `p-`i

Description : Assertion: `p`-nitrophenol is a stronger acid than `o`-nitrophenol. Reason: Intramolecular hydrogen bonding makes the `o`-isomer weaker than the `p-`i

Last Answer : Assertion: `p`-nitrophenol is a stronger acid than `o`-nitrophenol. Reason: Intramolecular hydrogen bonding ... D. A is incorrect but R is correct

Do polar compounds have stronger or weaker attractions between molecules?

Description : Do polar compounds have stronger or weaker attractions between molecules?

Last Answer : Polar compounds have stronger attractions between molecules.

Do polar compounds have stronger or weaker attractions between molecules?

Description : Do polar compounds have stronger or weaker attractions between molecules?

Last Answer : Polar compounds have stronger attractions between molecules.

During discharge of a lead-acid storage battery, which of the following actions occurs? A. The acid becomes stronger. B. Both plates change chemically to ammonium chloride. C. The acid becomes weaker. D. Hydrogen gas is liberated.

Description : During discharge of a lead-acid storage battery, which of the following actions occurs? A. The acid becomes stronger. B. Both plates change chemically to ammonium chloride. C. The acid becomes weaker. D. Hydrogen gas is liberated.

Last Answer : Answer: C

Unraveling an electromagnetic givesA. stronger field B. weaker field C. moderate field D. wider field

Description : Unraveling an electromagnetic givesA. stronger field B. weaker field C. moderate field D. wider field

Last Answer : weaker field

Phenol is (a) stronger acid than acetic acid (b) weaker acid than acetic acid (c) stronger base than methylamine (d) weaker base than methylamine

Description : Phenol is (a) stronger acid than acetic acid (b) weaker acid than acetic acid (c) stronger base than methylamine (d) weaker base than methylamine

Last Answer : weaker acid than acetic acid

Which of the following statements is false about the acid-strength of acetic acid? (a) Acetic acid is a stronger acid than monochloroacetic acid(b) Acetic acid is a stronger acid than propionic acid. (c) Acetic acid is a weaker acid than trichloroacetic acid. (d) Acetic acid is a weaker acid than formic acid.

Description : Which of the following statements is false about the acid-strength of acetic acid? (a) Acetic acid is a stronger acid than monochloroacetic acid. (b) Acetic acid is a stronger acid than propionic acid. ... is a weaker acid than trichloroacetic acid. (d) Acetic acid is a weaker acid than formic acid

Last Answer : Acetic acid is a stronger acid than monochloroacetic acid

Thiols are alcohol analogs in which the oxygen has been replaced by sulfur (e.g., CH3SH). Given the fact that the S–H bond is less polar than the O–H bond, which of the following statements comparing thiols and alcohols is correct? (a) Hydrogen bonding forces are weaker in thiols. (b) Hydrogen bonding forces are stronger in thiols. (c) Hydrogen bonding forces would be the same. (d) No comparison can be made without additional information

Description : Thiols are alcohol analogs in which the oxygen has been replaced by sulfur (e.g., CH3SH). Given the fact that the S-H bond is less polar than the O-H bond, which of the following ... (c) Hydrogen bonding forces would be the same. (d) No comparison can be made without additional information

Last Answer : Hydrogen bonding forces are weaker in thiols.

The stronger the acid __________. (a) the less stable its conjugate base (b) the larger the pKa (c) the weaker its conjugate base (d) the larger the pH

Description : The stronger the acid __________. (a) the less stable its conjugate base (b) the larger the pKa (c) the weaker its conjugate base (d) the larger the pH

Last Answer : the weaker its conjugate base

Which of the following statements is correct? (a) The stronger the acid, the weaker its conjugate base. (b) The stronger the acid, the stronger its conjugate base. (c) The stronger the base, the stronger its conjugate base. (d) The stronger the acid, the weaker its conjugate acid.

Description : Which of the following statements is correct? (a) The stronger the acid, the weaker its conjugate base. (b) The stronger the acid, the stronger its conjugate base. (c) The stronger the base, the stronger its conjugate base. (d) The stronger the acid, the weaker its conjugate acid.

Last Answer : The stronger the acid, the weaker its conjugate base

Pick up the correct statement from the following: (A) Illite bond is weaker than Kaolinite bond (B) Illite bond is stronger than montmorillonite bond (C) Illite does not swell when wet (D) All the above

Description : Pick up the correct statement from the following: (A) Illite bond is weaker than Kaolinite bond (B) Illite bond is stronger than montmorillonite bond (C) Illite does not swell when wet (D) All the above

Last Answer : Answer: Option D

. Lap joints are preferred over butt joints in soldering/brazing, because these joints are (A) Weaker in tension but stronger in shear (B) Weaker in shear but stronger in tension (C) Stronger in both shear and tension (D) The lap joints are easily made

Description : . Lap joints are preferred over butt joints in soldering/brazing, because these joints are (A) Weaker in tension but stronger in shear (B) Weaker in shear but stronger in tension (C) Stronger in both shear and tension (D) The lap joints are easily made

Last Answer : r: Option D

The less mercury remaining in condensed amalgam: A. The stronger the restoration which contains fewer matrix alloys and fewer voids B. The weaker the restoration C. The more matrix alloys D. The more voids E. None of the above

Description : The less mercury remaining in condensed amalgam: A. The stronger the restoration which contains fewer matrix alloys and fewer voids B. The weaker the restoration C. The more matrix alloys D. The more voids E. None of the above

Last Answer : A. The stronger the restoration which contains fewer matrix alloys and fewer voids

For same weight, same material, same length a. Solid shaft is always stronger than a hollow shaft b. Solid shaft is always weaker than a hollow shaft and strength ratio will depend upon Do/Di of hollow shaft c. Strength of both the shafts in equal d. Strength of a solid shaft is always weaker and the strength ratio will depend upon Do/Di of hollow shaft

Description : For same weight, same material, same length a. Solid shaft is always stronger than a hollow shaft b. Solid shaft is always weaker than a hollow shaft and strength ratio will depend upon Do/Di of ... of a solid shaft is always weaker and the strength ratio will depend upon Do/Di of hollow shaft

Last Answer : b. Solid shaft is always weaker than a hollow shaft and strength ratio will depend upon Do/Di of hollow shaft

In protolytic reactions in which the reactants are much stronger as an acid and a base than the products, the proton transfer reaction: w) does not occur x) approaches completeness y) produces a much stronger acid and a much weaker base z) produces a much weaker acid and a much stronger base

Description : In protolytic reactions in which the reactants are much stronger as an acid and a base than the products, the proton transfer reaction: w) does not occur x) approaches completeness y) produces a much stronger acid and a much weaker base z) produces a much weaker acid and a much stronger base

Last Answer : ANSWER: X -- APPROACHES COMPLETENESS

The condensing pressure due to the presence of non-condensable gases, as compared to that actually required forcondensing temperatures without non-condensable gases, (a) will be higher (b) will be lower (c) will remain unaffected (d) may be higher or lower depending upon the nature of non-condensable gases

Description : The condensing pressure due to the presence of non-condensable gases, as compared to that actually required forcondensing temperatures without non-condensable gases, (a) will be higher (b) will be ... remain unaffected (d) may be higher or lower depending upon the nature of non-condensable gases

Last Answer : Ans: a

During a slow decompression, passengers will occur: a. The cabin temperature will fall as pressure reduces b. Body cavities (sinuses, ears, etc.) will become pressurised and may require assistance in venting c. As soon as the pressure falls, the oxygen drop-out system will operate d. No contra effects, as slow decompression has no effect on the human body

Description : During a slow decompression, passengers will occur: a. The cabin temperature will fall as pressure reduces b. Body cavities (sinuses, ears, etc.) will become pressurised and may require assistance in ... will operate d. No contra effects, as slow decompression has no effect on the human body

Last Answer : b. Body cavities (sinuses, ears, etc.) will become pressurised and may require assistance in venting

An inversion is: a. A decrease of pressure with height b. A decrease of temperature with height c. An increase of temperature with height d. An increase of pressure with height

Description : An inversion is: a. A decrease of pressure with height b. A decrease of temperature with height c. An increase of temperature with height d. An increase of pressure with height

Last Answer : c. An increase of temperature with height

Generally, as altitude increases: a. Temperature decreases and density increases b. Temperature, pressure and density decreases c. Temperature and pressure increase and density decreases d. Temperature decreases and pressure and density increase

Description : Generally, as altitude increases: a. Temperature decreases and density increases b. Temperature, pressure and density decreases c. Temperature and pressure increase and density decreases d. Temperature decreases and pressure and density increase

Last Answer : b. Temperature, pressure and density decreases

A pressure head is subject to the following errors: a. Position, manoeuvre induced, temperature b. Position, manoeuvre induced c. Position, manoeuvre induced, density d. Position, manoeuvre induced, instrument

Description : A pressure head is subject to the following errors: a. Position, manoeuvre induced, temperature b. Position, manoeuvre induced c. Position, manoeuvre induced, density d. Position, manoeuvre induced, instrument

Last Answer : d. Position, manoeuvre induced, instrument

With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct ? (1) Increasing atmospheric CO 2 concentration up to 0.05% can enhance CO 2 fixation rate (2) C 3 plants respond to higher temperatures with enhanced photosynthesis while C 4 plants have much lower temperature optimum (3) Tomato is a greenhouse crop which can be grown in CO 2 - enriched atmosphere for higher yield (4) Light saturation for CO 2 fixation occurs at 10% of full sunlight

Description : With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct ? (1) Increasing atmospheric CO 2 concentration up to 0.05% can enhance CO 2 fixation ... for higher yield (4) Light saturation for CO 2 fixation occurs at 10% of full sunlight

Last Answer : (2) C 3 plants respond to higher temperatures with enhanced photosynthesis while C 4 plants have much lower temperature optimum