An inversion is: a. A decrease of pressure with height b. A decrease of temperature with height c. An increase of temperature with height d. An increase of pressure with height

An inversion is:  
a. A decrease of pressure with height  
b. A decrease of temperature with height  
c. An increase of temperature with height  
d. An increase of pressure with height
by

1 Answer

Answer :

c. An increase of temperature with height
by

Related questions

An inversion is: a. A decrease of pressure with height b. A decrease of temperature with height c. An increase of temperature with height d. An increase of pressure with height

Description : An inversion is:  a. A decrease of pressure with height  b. A decrease of temperature with height  c. An increase of temperature with height  d. An increase of pressure with height

Last Answer : c. An increase of temperature with height

A flight is to depart from an airport with runway 09 and 27. Surface wind is 270/05; an inversion is reported at 300 feet with turbulence and wind shear. The wind just above the inversion is 090/30. What is the safest departure procedure? a. Take-off is not possible under these conditions b. Depart on runway 09 with a tailwind c. Depart runway 27 with maximum throttle during the passage through the inversion d. Depart runway 27 with as steep an ascent as possible

Description : A flight is to depart from an airport with runway 09 and 27. Surface wind is 270/05; an inversion is reported at 300 feet with turbulence and wind shear. The wind just above the ... throttle during the passage through the inversion d. Depart runway 27 with as steep an ascent as possible

Last Answer : b. Depart on runway 09 with a tailwind

Where is wind shear the greatest? a. Near a strong low level inversion and in the region of a thunderstorm b. Near a valley with wind speeds greater than 35kts c. On the windward side of a mountain d. When the wind is greater than 35kts

Description : Where is wind shear the greatest? a. Near a strong low level inversion and in the region of a thunderstorm b. Near a valley with wind speeds greater than 35kts c. On the windward side of a mountain d. When the wind is greater than 35kts

Last Answer : a. Near a strong low level inversion and in the region of a thunderstorm

Which statement is true relative to changing angle of attack? a. A decrease in angle of attack will increase pressure below the wing and decrease drag b. An increase in angle of attack will decrease pressure below the wing and decrease drag c. An increase in angle of attack will increase drag d. An increase in angle of attack will decrease the lift coefficient

Description : Which statement is true relative to changing angle of attack? a. A decrease in angle of attack will increase pressure below the wing and decrease drag b. An increase in angle of attack will ... of attack will increase drag d. An increase in angle of attack will decrease the lift coefficient

Last Answer : c. An increase in angle of attack will increase drag

Shortly after take-off, the altitude of the aeroplane suffers an abrupt pitch-up and IAS rapidly decreases followed quickly by a decrease in altitude. Engine indications are normal. You should suspect what and what should you do? a. Marked temperature drop; apply full power b. Loss of head wind or an increase in tail wind; apply full power c. Incipient engine failure (ignore instruments); lower the nose to gain airspeed d. Local clear air turbulence; reduce speed to VRA and ride it out

Description : Shortly after take-off, the altitude of the aeroplane suffers an abrupt pitch-up and IAS rapidly decreases followed quickly by a decrease in altitude. Engine indications are normal. You should suspect what ... to gain airspeed d. Local clear air turbulence; reduce speed to VRA and ride it out

Last Answer : b. Loss of head wind or an increase in tail wind; apply full power

You are flying at a constant FL 290 and a constant mach number. The total temperature increases by 5°. The CAS will: a. Remain approximately constant b. Increase by 10 kts c. Decrease by 10 kts d. Will increase or decrease depending on whether you are above or below ISA

Description : You are flying at a constant FL 290 and a constant mach number. The total temperature increases by 5°. The CAS will: a. Remain approximately constant b. Increase by 10 kts c. Decrease by 10 kts d. Will increase or decrease depending on whether you are above or below ISA

Last Answer : a. Remain approximately constant

If airbrakes are extended during a glide, and speed maintained, the rate of descent will: a. Increase and glide angle will be steeper b. Increase but glide angle will remain the same c. Decrease d. Remain the same

Description : If airbrakes are extended during a glide, and speed maintained, the rate of descent will: a. Increase and glide angle will be steeper b. Increase but glide angle will remain the same c. Decrease d. Remain the same

Last Answer : a. Increase and glide angle will be steeper

How can the pilot increase the rate of turn and decrease the radius at the same time? a. Shallow the bank and increase airspeed b. Steeper bank and increase airspeed c. Steeper bank and decrease airspeed

Description : How can the pilot increase the rate of turn and decrease the radius at the same time? a. Shallow the bank and increase airspeed b. Steeper bank and increase airspeed c. Steeper bank and decrease airspeed

Last Answer : c. Steeper bank and decrease airspeed

To maintain altitude, what must be done as Indicated Airspeeed (IAS) is reduced? a. Decrease angle of attack to reduce the drag b. Increase angle of attack to maintain the correct lift force c. Deploy the speed brakes to increase drag d. Reduce thrust

Description : To maintain altitude, what must be done as Indicated Airspeeed (IAS) is reduced? a. Decrease angle of attack to reduce the drag b. Increase angle of attack to maintain the correct lift force c. Deploy the speed brakes to increase drag d. Reduce thrust

Last Answer : b. Increase angle of attack to maintain the correct lift force

What flight condition should be expected when an aircraft leaves ground effect? a. A decrease in parasite drag permitting a lower angle of attack b. An increase induced drag and a requirement for a higher angle of attack c. An increase in dynamic stability d. A decrease in induced drag requiring a smaller angle of attack

Description : What flight condition should be expected when an aircraft leaves ground effect? a. A decrease in parasite drag permitting a lower angle of attack b. An increase induced drag and a requirement ... increase in dynamic stability d. A decrease in induced drag requiring a smaller angle of attack

Last Answer : b. An increase induced drag and a requirement for a higher angle of attack

If flaps are lowered during the take-off run: a. The lift would not change until the aircraft is airborne b. The lift would increase when the flaps are lowered c. The lift would decrease d. The acceleration would increase

Description : If flaps are lowered during the take-off run: a. The lift would not change until the aircraft is airborne b. The lift would increase when the flaps are lowered c. The lift would decrease d. The acceleration would increase

Last Answer : b. The lift would increase when the flaps are lowered

What is normally the most effective measure to reduce or avoid CAT effects? a. Change of flight level b. Change of course c. Increase of speed d. Decrease of speed

Description : What is normally the most effective measure to reduce or avoid CAT effects? a. Change of flight level b. Change of course c. Increase of speed d. Decrease of speed

Last Answer : a. Change of flight level

Generally, as altitude increases: a. Temperature decreases and density increases b. Temperature, pressure and density decreases c. Temperature and pressure increase and density decreases d. Temperature decreases and pressure and density increase

Description : Generally, as altitude increases: a. Temperature decreases and density increases b. Temperature, pressure and density decreases c. Temperature and pressure increase and density decreases d. Temperature decreases and pressure and density increase

Last Answer : b. Temperature, pressure and density decreases

A pilot suffering from decompression sickness should: a. Descend to a lower level where the symptoms will disappear and continue the flight at this or a lower level b. Decrease the cabin pressure to relieve the symptoms c. Continue the flight at a lower altitude and carry out exercises to relieve the pain in the affected site d. Land as soon as possible and seek medical assistance

Description : A pilot suffering from decompression sickness should: a. Descend to a lower level where the symptoms will disappear and continue the flight at this or a lower level b. Decrease the cabin pressure ... the pain in the affected site d. Land as soon as possible and seek medical assistance

Last Answer : d. Land as soon as possible and seek medical assistance

The isobars drawn on a surface weather chart represent lines of equal pressure: a. At flight level b. At height of observatory c. At a determined density altitude d. Reduced to sea level

Description : The isobars drawn on a surface weather chart represent lines of equal pressure: a. At flight level b. At height of observatory c. At a determined density altitude d. Reduced to sea level

Last Answer : d. Reduced to sea level

Cabin altitude in pressured flight is: a. The altitude corresponding to cabin pressure regardless of aircraft height b. Is presented on a second needle on the aircraft altimeter c. Altitude at which cabin pressure equals ambient pressure d. Altitude corresponding to cabin pressure in relation to MSL ISA conditions

Description : Cabin altitude in pressured flight is: a. The altitude corresponding to cabin pressure regardless of aircraft height b. Is presented on a second needle on the aircraft altimeter c. ... equals ambient pressure d. Altitude corresponding to cabin pressure in relation to MSL ISA conditions

Last Answer : a. The altitude corresponding to cabin pressure regardless of aircraft height b. Is presented on a second needle on the aircraft altimeter

What do you call the increase of temperature with height? A. Temperature inversion B. Normal inversion C. Ducting D. Superrefraction

Description : What do you call the increase of temperature with height? A. Temperature inversion B. Normal inversion C. Ducting D. Superrefraction

Last Answer : A. Temperature inversion

The effects of carbon monoxide: a. Increases with altitude b. Decreases with altitude c. Increases with increase of density d. Decreases with pressure loss

Description : The effects of carbon monoxide: a. Increases with altitude b. Decreases with altitude c. Increases with increase of density d. Decreases with pressure loss

Last Answer : a. Increases with altitude

Fuel is to be jettisoned: a. Over the sea and then only above 10,000ft b. Over the sea or over land above 10,000ft AGL c. Anywhere and at any height if unavoidable in an emergency d. Over the sea, or over land above 4000ft in summer or 7000ft in winter

Description : Fuel is to be jettisoned: a. Over the sea and then only above 10,000ft b. Over the sea or over land above 10,000ft AGL c. Anywhere and at any height if unavoidable in an emergency d. Over the sea, or over land above 4000ft in summer or 7000ft in winter

Last Answer : c. Anywhere and at any height if unavoidable in an emergency

An aircraft climbs from an airfield, elevation 1500ft, QNH 1023mb, to FL75. What height does the aircraft have to climb? (Assume 1mb=30ft) a. 6600 ft b. 7800 ft c. 6300 ft d. 6000 ft

Description : An aircraft climbs from an airfield, elevation 1500ft, QNH 1023mb, to FL75. What height does the aircraft have to climb? (Assume 1mb=30ft) a. 6600 ft b. 7800 ft c. 6300 ft d. 6000 ft

Last Answer : c. 6300 ft

The Q code on which height is based on: a. QNH b. QFF c. QFE d. QUJ

Description : The Q code on which height is based on: a. QNH b. QFF c. QFE d. QUJ

Last Answer : c. QFE

Clearance limit is defined as: a. The flight level to which an aircraft is granted ATC clearance b. The time at which the ATC clearance expires c. The point to which aircraft is granted ATC clearance d. The height below which you will hit the first obstacle

Description : Clearance limit is defined as: a. The flight level to which an aircraft is granted ATC clearance b. The time at which the ATC clearance expires c. The point to which aircraft is granted ATC clearance d. The height below which you will hit the first obstacle

Last Answer : c. The point to which aircraft is granted ATC clearance

Aircraft A flies in VMC with an ATC clearance within a control area. Aircraft B without ATC clearance approaches at roughly the same height on a converging heading. Who has the right of way? a. Aircraft A, regardless of the direction from which B approaches b. Aircraft B, regardless of the direction from which A approaches c. Aircraft A, if B is to the right of him d. Aircraft B, if A is to the left of him

Description : Aircraft A flies in VMC with an ATC clearance within a control area. Aircraft B without ATC clearance approaches at roughly the same height on a converging heading. Who has the right of way? a. Aircraft A, regardless ... , if B is to the right of him d. Aircraft B, if A is to the left of him

Last Answer : d. Aircraft B, if A is to the left of him

What action should be taken if contact is lost with the runway during a circling approach? a. Descend to Decision Height and if still no contact with the runway, initiate a missed approach b. Land on the instrument runway c. Initiate a missed approach d. Return to the FAF

Description : What action should be taken if contact is lost with the runway during a circling approach? a. Descend to Decision Height and if still no contact with the runway, initiate a missed approach b. Land on the instrument runway c. Initiate a missed approach d. Return to the FAF

Last Answer : c. Initiate a missed approach

What is the rule concerning level or height the aircraft should maintain when flying IFR outside controlled airspace unless otherwise directed? a. 2,000 feet above the highest obstacle within 8kms of the heading b. 1,000 feet above the highest obstacle within 8kms of the estimated position of the aircraft c. 1,000 feet above the highest obstacle within 8kms of the planned track d. 2,000 feet above the highest obstacle within 8kms of the planned track

Description : What is the rule concerning level or height the aircraft should maintain when flying IFR outside controlled airspace unless otherwise directed? a. 2,000 feet above the highest obstacle within 8kms of ... planned track d. 2,000 feet above the highest obstacle within 8kms of the planned track

Last Answer : b. 1,000 feet above the highest obstacle within 8kms of the estimated position of the aircraft

What type of autoland system would be required for the landing to continue following a single failure below alert height? a. Fail soft b. Fail passive c. Fail operational or fail active d. Land 2 system

Description : What type of autoland system would be required for the landing to continue following a single failure below alert height? a. Fail soft b. Fail passive c. Fail operational or fail active d. Land 2 system

Last Answer : D. All of the above

At what height is it mandatory for one flight crew deck to wear an oxygen mask? a. 25,000ft b. 32,000ft c. 37,000ft d. 41,000ft

Description : At what height is it mandatory for one flight crew deck to wear an oxygen mask? a. 25,000ft b. 32,000ft c. 37,000ft d. 41,000ft

Last Answer : d. 41,000ft

At what height is it mandatory for one flight crew deck to wear an oxygen mask? a. 25,000ft b. 32,000ft c. 37,000ft d. 41,000ft

Description : At what height is it mandatory for one flight crew deck to wear an oxygen mask? a. 25,000ft b. 32,000ft c. 37,000ft d. 41,000ft

Last Answer : d. 41,000ft

During a slow decompression, passengers will occur: a. The cabin temperature will fall as pressure reduces b. Body cavities (sinuses, ears, etc.) will become pressurised and may require assistance in venting c. As soon as the pressure falls, the oxygen drop-out system will operate d. No contra effects, as slow decompression has no effect on the human body

Description : During a slow decompression, passengers will occur: a. The cabin temperature will fall as pressure reduces b. Body cavities (sinuses, ears, etc.) will become pressurised and may require assistance in ... will operate d. No contra effects, as slow decompression has no effect on the human body

Last Answer : b. Body cavities (sinuses, ears, etc.) will become pressurised and may require assistance in venting

The greater the pressure gradient the: a. Closer the isobars and the lower the temperatures b. Further the isobars will be apart and the higher the temperature c. Closer the isobars and the stronger the wind d. Further the isobars will be apart and the weaker the wind

Description : The greater the pressure gradient the: a. Closer the isobars and the lower the temperatures b. Further the isobars will be apart and the higher the temperature c. Closer the isobars and the stronger the wind d. Further the isobars will be apart and the weaker the wind

Last Answer : c. Closer the isobars and the stronger the wind

What causes wind? a. Difference in pressure b. Rotation of the earth c. Frontal systems d. Difference in temperature

Description : What causes wind? a. Difference in pressure b. Rotation of the earth c. Frontal systems d. Difference in temperature

Last Answer : a. Difference in pressure

For take-off performance calculations, what is taken into account? a. OAT, pressure altitude, wind, weight b. Standard temperature, altitude, wind, weight c. Standard altitude, standard temperature, wind, weight d. Standard temperature, pressure altitude, wind, weight

Description : For take-off performance calculations, what is taken into account? a. OAT, pressure altitude, wind, weight b. Standard temperature, altitude, wind, weight c. Standard altitude, standard temperature, wind, weight d. Standard temperature, pressure altitude, wind, weight

Last Answer : a. OAT, pressure altitude, wind, weight

A pressure head is subject to the following errors: a. Position, manoeuvre induced, temperature b. Position, manoeuvre induced c. Position, manoeuvre induced, density d. Position, manoeuvre induced, instrument

Description : A pressure head is subject to the following errors: a. Position, manoeuvre induced, temperature b. Position, manoeuvre induced c. Position, manoeuvre induced, density d. Position, manoeuvre induced, instrument

Last Answer : d. Position, manoeuvre induced, instrument

What is the recommended technique to counter the loss of airspeed and resultant lift from wind shear? a. Maintain, or increase, pitch attitude and accept the lower-than-normal airspeed indications b. Lower the pitch attitude and regain lost airspeed c. Avoid overstressing aircraft, pitch to stick shaker, and apply maximum power d. Accelerate the aircraft to prevent a stall by sacrificing altitude

Description : What is the recommended technique to counter the loss of airspeed and resultant lift from wind shear? a. Maintain, or increase, pitch attitude and accept the lower-than-normal airspeed ... shaker, and apply maximum power d. Accelerate the aircraft to prevent a stall by sacrificing altitude

Last Answer : c. Avoid overstressing aircraft, pitch to stick shaker, and apply maximum power

To recover from a spin, the elevators should be: a. Moved up to increase the angle of attack b. Moved down to reduce the angle of attack c. Set to neutral d. Allowed to float

Description : To recover from a spin, the elevators should be: a. Moved up to increase the angle of attack b. Moved down to reduce the angle of attack c. Set to neutral d. Allowed to float

Last Answer : b. Moved down to reduce the angle of attack

The purpose of a trim tab is: a. To assist the pilot in initiating movement of the controls b. To zero the load on the pilot controls in the flight attitude required c. To provide feel to the controls at high speed d. To increase the effectiveness of the controls

Description : The purpose of a trim tab is: a. To assist the pilot in initiating movement of the controls b. To zero the load on the pilot controls in the flight attitude required c. To provide feel to the controls at high speed d. To increase the effectiveness of the controls

Last Answer : b. To zero the load on the pilot controls in the flight attitude required

In the event of cabin depressurization, the actions of the pilot will be to: a. Immediately commence a diversion to a suitable alternate b. Increase engine power to provide additional airflow to the pressurization systems c. Maintain the aeroplane altitude to prevent further damage to the airframe by over loading of the structure d. Commence a descent to an altitude where the supplemental oxygen supply is sufficient for all crew and passengers

Description : In the event of cabin depressurization, the actions of the pilot will be to: a. Immediately commence a diversion to a suitable alternate b. Increase engine power to provide additional ... a descent to an altitude where the supplemental oxygen supply is sufficient for all crew and passengers

Last Answer : d. Commence a descent to an altitude where the supplemental oxygen supply is sufficient for all crew and passengers

The best strategies to increase stress tolerance are: a. Planning, experience and self-control (fewer unexpected situation) b. Learning, experience and anticipation c. Learning, experience and CRM d. Planning, experience and CRM

Description : The best strategies to increase stress tolerance are: a. Planning, experience and self-control (fewer unexpected situation) b. Learning, experience and anticipation c. Learning, experience and CRM d. Planning, experience and CRM

Last Answer : c. Learning, experience and CRM

In the stratosphere, why does temperature increase with increasing height? (a) Conduction. (b) Convection. (c) Greater absorption of ultraviolet radiation at the top of the strato- sphere. (d) The pressure and density rapidly decrease as you go up through the strato- sphere, thus the ideal gas law requires temperature to increase too.

Description : In the stratosphere, why does temperature increase with increasing height? (a) Conduction. (b) Convection. (c) Greater absorption of ultraviolet radiation at the top of the strato- sphere. (d ... you go up through the strato- sphere, thus the ideal gas law requires temperature to increase too.

Last Answer : Greater absorption of ultraviolet radiation at the top of the strato- sphere.

What phenomenon causes induced drag? a. Wing tip vortices b. Wing tanks c. The increased pressure at the leading edge

Description : What phenomenon causes induced drag? a. Wing tip vortices b. Wing tanks c. The increased pressure at the leading edge

Last Answer : a. Wing tip vortices

The station pressure used in surface weather charts is: a. QNE b. QFF c. QFE d. QNH

Description : The station pressure used in surface weather charts is: a. QNE b. QFF c. QFE d. QNH

Last Answer : a. QNE

Which constant pressure altitude chart is standard for a 30,065 ft pressure level (FL 300)? a. 200 hPa b. 700 hPa c. 500 hPa d. 300 hPa

Description : Which constant pressure altitude chart is standard for a 30,065 ft pressure level (FL 300)? a. 200 hPa b. 700 hPa c. 500 hPa d. 300 hPa

Last Answer : d. 300 hPa

You are cruising at FL 200, OAT is -40°C, sea level pressure is 1033 hPa. Calculate the true altitude. a. 20,660 ft b. 21,740 ft c. 18,260 ft d. 19, 340 ft

Description : You are cruising at FL 200, OAT is -40°C, sea level pressure is 1033 hPa. Calculate the true altitude. a. 20,660 ft b. 21,740 ft c. 18,260 ft d. 19, 340 ft

Last Answer : d. 19, 340 ft

You are flying at FL170. The pressure level which is closest to you is the: a. 300mb b. 700mb c. 500mb d. 850mb

Description : You are flying at FL170. The pressure level which is closest to you is the: a. 300mb b. 700mb c. 500mb d. 850mb

Last Answer : c. 500mb

The most likely cause of brake fade is: a. Oil or grease on the brake drums b. Worn stators c. The pilot reducing the brake pressure d. The brake pads overheating

Description : The most likely cause of brake fade is: a. Oil or grease on the brake drums b. Worn stators c. The pilot reducing the brake pressure d. The brake pads overheating

Last Answer : d. The brake pads overheating

The purpose of an accumulator is to: a. Relieve excess pressure b. Store fluid under pressure c. Store compressed gas for tyre inflation d. Remove air from the system

Description : The purpose of an accumulator is to: a. Relieve excess pressure b. Store fluid under pressure c. Store compressed gas for tyre inflation d. Remove air from the system

Last Answer : b. Store fluid under pressure

If cabin pressure is decreasing, the cabin VSI will indicate: a. Zero b. Climb c. Descent d. Reducing pressure

Description : If cabin pressure is decreasing, the cabin VSI will indicate: a. Zero b. Climb c. Descent d. Reducing pressure

Last Answer : b. Climb

A shuttle valve will: a. Allow the accumulator to be emptied after engine shut down b. Reduce pump loading when normal system pressure is reached c. Automatically switched to a more appropriate source of hydraulic supply d. Operate on a rising pressure, higher than the Full Flow relief valve

Description : A shuttle valve will: a. Allow the accumulator to be emptied after engine shut down b. Reduce pump loading when normal system pressure is reached c. Automatically switched to a more appropriate source of hydraulic supply d. Operate on a rising pressure, higher than the Full Flow relief valve

Last Answer : c. Automatically switched to a more appropriate source of hydraulic supply

When does the engine High Pressure fuel shut off valve close? a. After a booster pump failure b. When the engine fuel switch is selected ‘ON’ during engine start c. When flight idle is selected d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

Description : When does the engine High Pressure fuel shut off valve close? a. After a booster pump failure b. When the engine fuel switch is selected ‘ON’ during engine start c. When flight idle is selected d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

Last Answer : d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

Which of the following instruments require inputs of both pitot and static pressure? a. Airspeed indicator, machmeter and vertical speed indicator b. Airspeed indicator, vertical speed indicator, altimeter c. Airspeed indicator only d. Airspeed indicator and machmeter

Description : Which of the following instruments require inputs of both pitot and static pressure? a. Airspeed indicator, machmeter and vertical speed indicator b. Airspeed indicator, vertical speed indicator, altimeter c. Airspeed indicator only d. Airspeed indicator and machmeter

Last Answer : d. Airspeed indicator and machmeter