Description : Integration testing where no incremental testing takes place prior to all the system’s components being combined to form the system. A. System testing B. Component Testing C. Incremental Testing D. Big bang testing
Last Answer : D. Big bang testing
Description : Big bang approach is related to A. Regression testing B. Inter system testingC. Re-testing D. Integration testing
Last Answer : D. Integration testing
Description : A type of integration testing in which software elements, hardware elements, or both are combined all at once into a component or an overall system, rather than in stages. A. System Testing B. Big-Bang Testing C. Integration Testing D. Unit Testing
Last Answer : B. Big-Bang Testing
Last Answer : B. Check the technical accuracy of the document
Description : Testing error messages fall under _________category of testing. A. Incremental Testing B. Thread Testing C. Documentation Testing D. Stress Testing
Last Answer : C. Documentation Testing
Description : All the modules of the system are integrated and tested as complete system in the case of (A) Bottom up testing (B) Top-down testing (C) Sandwich testing (D) Big-Bang testing
Last Answer : (D) Big-Bang testing
Description : Functional system testing is: a) testing that the system functions with other systems b) testing that the components that comprise the system function together c) testing the end to end functionality of the system as a whole d) testing the system performs functions within specified response times
Last Answer : c) testing the end to end functionality of the system as a whole
Description : Which of the following uses Impact Analysis most? a) Component testing b) Non-functional system testing c) User acceptance testing d) Maintenance testing
Last Answer : d) Maintenance testing
Description : State which of the one is false A. In performance testing, usage of tool is a must B. In database testing, database knowledge is a must. C. In Functional Testing, knowledge of business logic is a must D. None of the above.
Last Answer : D. None of the above.
Description : Portability falls under _______ A. Compliance testing B. Disaster testing C. Verifying compliance to rules D. Functional testing E. Ease of operations
Last Answer : B. Disaster testing
Description : Security falls under _______ A. Compliance testing B. Disaster testing C. Verifying compliance to rules D. Functional testing E. Ease of operations
Last Answer : A. Compliance testing
Description : Operations testing is _______ A. Compliance testing B. Disaster testing C. Verifying compliance to rules D. Functional testing E. Ease of operations
Last Answer : E. Ease of operations
Description : Testing techniques that can be used in acceptance testing are A. Structural B. Functional C. Usability D. A and B E. B and C
Last Answer : D. A and B
Description : The testing attempts to violate those procedures, which should test the adequacy of the security procedures. A. Disaster testing B. Functional testing C. Regression testing D. Compliance testing
Last Answer : D. Compliance testing
Description : __________ testing assumes that the path of logic in a unit or program is known. A. Black Box testing B. Performance Testing C. White Box testing D. Functional testing
Last Answer : C. White Box testing
Description : Test summary report A. Functional testing is mostly B. Validation techniques C. Verification techniques D. Both of the above E. None of the above
Last Answer : B. Validation techniques
Description : Mutation testing is related to A. Fault seeding B. Functional testing C. Fault checking D. None of the above
Last Answer : A. Fault seeding
Description : Test planning has which of the following major tasks? i. Determining the scope and risks, and identifying the objectives of testing. ii. Determining the test approach (techniques, test items, coverage, identifying and ... are true and iii, iv are false d) ii, iii, iv are true and i is false
Last Answer : c) ii , iii are true and i is false
Description : A test harness is a A. A high level document describing the principles, approach and major objectives of the organization regarding testing B. A distance set of test activities collected into a manageable phase ... conduct a test D. A set of several test cases for a component or system under test
Last Answer : C. A test environment comprised of stubs and drives needed to conduct a test
Description : This life cycle model is basically driven by schedule and budget risks This statement is best suited for A. Water fall model B. Spiral model C. Incremental model D. V-Model Q33. The bug tracking ... these phases for each bug. I. Phase injected II. Phase detected III. Phase fixed IV. Phase removed
Last Answer : B. I, II and IV
Description : Which of the following is a requirement of an effective software environment? I. Ease of use II. Capacity for incremental implementation III. Capability of evolving with the needs of a project IV. Inclusion of advanced tools A.I, II &III B.I, II &IV C.II, III&IV D.I, III&IV
Last Answer : A.I, II &III
Description : Which of the following is not a type of test under phases in testing life cycle? A. Integration test B. Load test C. User Acceptance test D. Beta test
Last Answer : D. Beta test
Description : Features to be tested, approach, item pass/fail criteria and test deliverables should be specified in which document? a) Test case specification b) Test procedure specification c) Test plan d) Test design specification
Last Answer : c) Test plan
Description : In case of Large Systems :- a) Only few tests should be run b) Testing should be on the basis of Risk c) Only Good Test Cases should be executed. d) Test Cases written by good test engineers should be executed.
Last Answer : b) Testing should be on the basis of Risk
Description : Which of the following helps in monitoring the Test Progress:- i. Percentage of Test Case Execution ii. Percentage of work done in test environment preparation. iii. Defect Information e.g. defect density, ... ii,iii are correct and iv is incorrect c) i,ii are correct and iii,iv are incorrect
Last Answer : b) i,ii,iii are correct and iv is incorrect
Description : Which of the following will be the best definition for Testing :- a) The goal / purpose of testing is to demonstrate that the program works. b) The purpose of testing is to demonstrate that the ... does what it is supposed to do. d) Testing is executing Software for the purpose of finding defects.
Last Answer : d) Testing is executing Software for the purpose of finding defects.
Description : Which of the following is the task of a Test Lead / Leader: i. Interaction with the Test Tool Vendor to identify best ways to leverage test tool on the project. ii. Write Test Summary Reports based on the ... is true and ii,iii,iv are false d) iii and iv is correct and i and ii are incorrect
Last Answer : a) i, ii, iii is true and iv is false
Description : Benefits of Independent Testing a) Independent testers are much more qualified than Developers b) Independent testers see other and different defects and are unbiased. c) Independent Testers cannot identify defects. d) Independent Testers can test better than developers
Last Answer : b) Independent testers see other and different defects and are unbiased.
Description : Regression testing should be performed: i. every week ii. after the software has changed iii. as often as possible iv. when the environment has changed v. when the project manager says a) i & ii are true, iii, iv & v are ... iv are true, i, iii & v are false d) ii is true, i, iii, iv & v are false
Last Answer : c) ii & iv are true, i, iii & v are false
Description : Which of the following is true about White and Black Box Testing Technique:- a) Equivalance partitioning, Decision Table and Control flow are White box Testing Techniques. b) Equivalence partitioning ... , State Transition , Use Case Testing and Decision Table are White Box Testing Techniques.
Last Answer : c) Equivalence partitioning , State Transition , Use Case Testing are black box Testing Techniques.
Description : Which of the following techniques is NOT a black box technique? a) State transition testing b) LCSAJ (Linear Code Sequence and Jump) c) syntax testing d) boundary value analysis
Last Answer : b) LCSAJ (Linear Code Sequence and Jump)
Description : Match every stage of the software Development Life cycle with the Testing Life cycle: i. Hi-level design a Unit tests ii. Code b Acceptance tests iii. Low-level design c System tests iv. Business requirements d Integration tests a) i-d , ii ... i-b , ii-a , iii-d , iv-c d) i-c , ii-a , iii-d , iv-b
Last Answer : d) i-c , ii-a , iii-d , iv-b
Description : Impact Analysis helps to decide :- a) How much regression testing should be done. b) Exit Criteria c) How many more test cases need to written. d) Different Tools to perform Regression Testing
Last Answer : a) How much regression testing should be done.
Description : Repeated Testing of an already tested program, after modification, to discover any defects introduced or uncovered as a result of the changes in the software being tested or in another related or ... software component: a) Re Testing b) Confirmation Testing c) Regression Testing d) Negative Testing
Last Answer : c) Regression Testing
Description : Deciding how much testing is enough should take into account:- i. Level of Risk including Technical and Business product and project risk ii. Project constraints such as time and budget iii. Size of Testing Team iv. Size ... ii are true and iii, iv are false d) ii, iii, iv are true and i is false
Last Answer : c) i, ii are true and iii, iv are false
Description : Test charters are used in ________ testingA. Exploratory testing B. Usability testing C. Component testing D. Maintainability testing
Last Answer : A. Exploratory testing
Description : System test can begin when? I. The test team competes a three day smoke test and reports on the results to the system test phase entry meeting II. The development team provides software to the test team 3 business days prior ... . I and II only B. II and III only C. I and III only D. I, II and III
Last Answer : D. I, II and III
Description : Entry criteria' should address questions such as I. Are the necessary documentation, design and requirements information available that will allow testers to operate the system and judge correct behavior. II. Is the test environment-lab, ... B. I, II and III C. I, II, III and IV D. II, III and IV.
Last Answer : A. I and II only
Description : Testing of software used to convert data from existing systems for use in replacement systems A. Data driven testing B. Migration testing C. Configuration testing D. Back to back testing
Last Answer : B. Migration testing
Description : Which technique can be used to achieve input and output coverage? It can be applied to human input, input via interfaces to a system, or interface parameters in integration testing. A. Error Guessing B. Boundary Value Analysis C. Decision Table testing D. Equivalence partitioning
Last Answer : D. Equivalence partitioning
Description : In practice, which Life Cycle model may have more, fewer or different levels of development and testing, depending on the project and the software product. For example, there may be component integration testing ... after system testing. A. Water Fall Model B.V-Model C. Spiral Model D. RAD Model
Last Answer : B.V-Model
Description : You are the test manager and you are about the start the system testing. The developer team says that due to change in requirements they will be able to deliver the system to you for ... concentrate more on critical functionality testing D. Add more resources so that the slippage should be avoided
Last Answer : B. Extend the testing plan, so that you can accommodate the slip going to occur
Description : In practice, which Life Cycle model may have more, fewer or different levels of development and testing, depending on the project and the software product. For example, there may be component integration testing after component testing, and
Description : The primary goal of comparing a user manual with the actual behavior of the running program during system testing is to A. Find bugs in the program B. Check the technical accuracy of the document
Description : During the testing of a module tester X' finds a bug and assigned it to developer. But developer rejects the same, saying that it's not a bug. What X' should do? A. Report ... same bug to another developer D. Send to the detailed information of the bug encountered and check the reproducibility
Last Answer : D. Send to the detailed information of the bug encountered and check the reproducibility
Description : A test manager wants to use the resources available for the automated testing of a web application. The best choice is A. Test automater, web specialist, DBA, test lead B. Tester, test automater, web ... C. Tester, test lead, test automater, DBA D. Tester, web specialist, test lead, test automater
Last Answer : B. Tester, test automater, web specialist, DBA
Description : When testing a grade calculation system, a tester determines that all scores from 90 to 100 will yield a grade of A, but scores below 90 will not. This analysis is known as: A. Equivalence partitioning B. Boundary value analysis C. Decision table D. Hybrid analysis
Last Answer : A. Equivalence partitioning
Description : All of the following might be done during unit testing except A. Desk checkB. Manual support testing C. Walkthrough D. Compiler based testing
Last Answer : B. Manual support testing