The main problem with such a heat treatment of stainless steel pipe spools and the reason why it is not regularly employed is: a) Controlling the rate of the temperature rise b) Controlling the cooling c) The length of the soak period d) High risk of distortion

The main problem with such a heat treatment of stainless steel pipe spools and the reason why it is not regularly  employed is:
a) Controlling the rate of the temperature rise b) Controlling the cooling  
c) The length of the soak period d) High risk of distortion
by

1 Answer

Answer :

d) High risk of distortion
by

Related questions

Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at 35°C (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C (C) Boiling brine kept in open vessel when the bottom surface temperature of the vessel is maintained constant at 180°C (D) A sub-cooled refrigerant liquid at 8°C flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Description : Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at ... flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Last Answer : (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C

What is the reason why companding is employed in PCM systems? A. To overcome impulse noise in PCM receivers B. To allow amplitude limiting in the receivers C. To solve quantizing noise problem D. To protect small signals in PCM from quantizing distortion

Description : What is the reason why companding is employed in PCM systems? A. To overcome impulse noise in PCM receivers B. To allow amplitude limiting in the receivers C. To solve quantizing noise problem D. To protect small signals in PCM from quantizing distortion

Last Answer : D. To protect small signals in PCM from quantizing distortion

Pick out the correct statement. (A) Stainless steel is nothing but chromium coated steel (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal (C) Plastic deformation of a material is its temporary distortion under the action of applied stress (D) Rusting of iron is not electrochemical in nature

Description : Pick out the correct statement. (A) Stainless steel is nothing but chromium coated steel (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal (C) ... its temporary distortion under the action of applied stress (D) Rusting of iron is not electrochemical in nature

Last Answer : (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal

If a small electric motor has been submerged in saltwater for a short period of time, you should _____________. A. send it ashore for rewinding B. rinse it with warm freshwater and bake it dry in an oven C. soak it in a bucket of commercial solvent and bake with internal heat D. clean it with carbon tetrachloride and blow it out with compressed air

Description : If a small electric motor has been submerged in saltwater for a short period of time, you should _____________. A. send it ashore for rewinding B. rinse it with warm freshwater and bake it dry ... and bake with internal heat D. clean it with carbon tetrachloride and blow it out with compressed air

Last Answer : Answer: B

Which of the following is the most suitable material of construction for the condenser tubes, where the cooling medium is brine (salty water)? (A) Aluminium (B) Copper (C) Titanium (D) Stainless steel

Description : Which of the following is the most suitable material of construction for the condenser tubes, where the cooling medium is brine (salty water)? (A) Aluminium (B) Copper (C) Titanium (D) Stainless steel

Last Answer : Option C

Beams of hyperbolic cooling towers are made up of a) Tungsten b) Iron c) Stainless steel d) Brass

Description : Beams of hyperbolic cooling towers are made up of a) Tungsten b) Iron c) Stainless steel d) Brass

Last Answer : c) Stainless steel

What does 361 stainless steel pipe cost.?

Description : What does 361 stainless steel pipe cost.?

Last Answer : i think you are looking for 316 stainless steel pipe.

What does 361 stainless steel pipe cost.?

Description : What does 361 stainless steel pipe cost.?

Last Answer : i think you are looking for 316 stainless steel pipe.

Material of construction of pipe generally used for conveying water in India is (A) Stainless steel (B) Cast iron (C) Wrought iron (D) Lead lined steel

Description : Material of construction of pipe generally used for conveying water in India is (A) Stainless steel (B) Cast iron (C) Wrought iron (D) Lead lined steel

Last Answer : (B) Cast iron

_________ pipe is the most suitable for carrying sanitary drainage. (A) Stainless steel (B) Reinforced cement concrete (C) Cast iron (D) Asbestos cement

Description : _________ pipe is the most suitable for carrying sanitary drainage. (A) Stainless steel (B) Reinforced cement concrete (C) Cast iron (D) Asbestos cement

Last Answer : C) Cast iron

What is meant by the term PWHT? a) Pipe weld heat treatment b) Pre weld heat treatment c) Post weld hydrogen tearing d) Post weld het treatment

Description : What is meant by the term PWHT? a) Pipe weld heat treatment b) Pre weld heat treatment c) Post weld hydrogen tearing d) Post weld het treatment

Last Answer : d) Post weld het treatment

Which of the following positions are employed to help reduce intracranial pressure (ICP)? a) Avoiding flexion of the neck with use of a cervical collar Use of a cervical collar promotes venous drainage and prevents jugular vein distortion that will increase ICP.

Description : Which of the following positions are employed to help reduce intracranial pressure (ICP)? a) Avoiding flexion of the neck with use of a cervical collar Use of a cervical collar promotes venous ... an increase in intra-abdominal pressure and intrathoracic pressure, which can produce a rise in ICP.

Last Answer : a) Avoiding flexion of the neck with use of a cervical collar Use of a cervical collar promotes venous drainage and prevents jugular vein distortion that will increase ICP.

An amplifier has a voltage gain of 120. To reduce distortion, 10% negative feedback is employed. The gain of

Description : An amplifier has a voltage gain of 120. To reduce distortion, 10% negative feedback is employed. The gain of the amplifier with feedback is  (1) 141 (2) 92.3 (3) 9.23 (4) 1.41

Last Answer : An amplifier has a voltage gain of 120. To reduce distortion, 10% negative feedback is employed. The gain of the amplifier with feedback is 9.23

Noise produced by cooling fans (employed in air cooled heat exchangers or cooling tower) is mainly caused due to the turbulence created by blade passage through air. It can be reduced by use of a slower fan (A) With greater number of blades (B) Of increased diameter (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Noise produced by cooling fans (employed in air cooled heat exchangers or cooling tower) is mainly caused due to the turbulence created by blade passage through air. It can be reduced by use of a slower fan (A) With greater ... (B) Of increased diameter (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

A post weld heat treatment may also be of benefit in minimizing the risk of weld decay, this heat treatment would be called? a) Stress relief b) Normalizing c) Quench and Tempering d) Solution treatment over 1000 °C

Description : A post weld heat treatment may also be of benefit in minimizing the risk of weld decay, this heat treatment would be called? a) Stress relief b) Normalizing c) Quench and Tempering d) Solution treatment over 1000 °C

Last Answer : d) Solution treatment over 1000 °C

A steel alloy containing 36% nickel is called __________, which has a zero co-efficient of expansion. (A) Austenitic stainless steel (B) Heat resisting steel (C) Invar (D) High speed steel

Description : A steel alloy containing 36% nickel is called __________, which has a zero co-efficient of expansion. (A) Austenitic stainless steel (B) Heat resisting steel (C) Invar (D) High speed steel

Last Answer : (C) Invar

Clock pendulums are usually made of __________ steel. (A) High speed (B) Stainless (C) Heat resisting (D) None of these

Description : Clock pendulums are usually made of __________ steel. (A) High speed (B) Stainless (C) Heat resisting (D) None of these

Last Answer : (D) None of these

The disc is made from of 5mm-10mm thickness. a) Heat treated steel b) Case hardened steel c) Stainless steel d) High speed steel

Description : The disc is made from of 5mm-10mm thickness. a) Heat treated steel b) Case hardened steel c) Stainless steel d) High speed steel

Last Answer : Heat treated steel

Weld decay occurs in which of the following steel types? a) Carbon/Manganese b) Low alloy c) Any stainless steel d) Austenitic stainless steels

Description : Weld decay occurs in which of the following steel types? a) Carbon/Manganese b) Low alloy c) Any stainless steel d) Austenitic stainless steels

Last Answer : d) Austenitic stainless steels

Capital employed is Rs.50,000 Trading Profit amounted Rs.12,200, Rs.15,000 and Rs.2000 loss for 2016, 2017 and 2018 respectively. Rate of interest is 8% and the rate of risk is 2% Remuneration from alternative employment of the proprietor is Rs.3,600 pa. Amount of Goodwill at 3 years. purchase of super Profit is A Rs.8,000 B Rs.8,800 C Rs.8,850 D Rs.9,500 ANS: Rs.8,850

Description : Capital employed is Rs.50,000 Trading Profit amounted Rs.12,200, Rs.15,000 and Rs.2000 loss for 2016, 2017 and 2018 respectively. Rate of interest is 8% and the rate of risk is 2% Remuneration from alternative employment of the ... A Rs.8,000 B Rs.8,800 C Rs.8,850 D Rs.9,500 ANS: Rs.8,850

Last Answer : A

Suppose some students indulge in porno graphic painting in the school's toilets and other places on walls and you nab a student busy with the work, what option will you prefer with the students? Options: A) You will warn him and leave as it is the common problem of adolescent's age B) You will reasonably punish him and ask him not do it again C) You will penalize the whole class D) You diagnose the group of such students and regularly keep vigilant eyes on them.

Description : Suppose some students indulge in porno graphic painting in the school's toilets and other places on walls and you nab a student busy with the work, what option will you prefer with the students? ... whole class D) You diagnose the group of such students and regularly keep vigilant eyes on them.

Last Answer : You will reasonably punish him and ask him not do it again

Light coloured clothes are preferred in summer because (a) light colours are good radiators of heat (b) light colours are poor absorbers of heat (c) they soak sweat faster (d) they allow body heat to escape faster

Description : Light coloured clothes are preferred in summer because (a) light colours are good radiators of heat (b) light colours are poor absorbers of heat (c) they soak sweat faster (d) they allow body heat to escape faster

Last Answer : Ans:(b)

When welding medium carbon steel plates over 100mm in thickness would the basic electrodes require any pre treatment before use? a) None if they were in a vacuum pack opened 8 hours prior to use b) None if they were in a sealed vacuum pack prior to use c) Heat to 500 °C for 2 hours if used outside d) Baked at 150°C for 4hours prior to use

Description : When welding medium carbon steel plates over 100mm in thickness would the basic electrodes require any pre treatment before use? a) None if they were in a vacuum pack opened 8 hours prior to use b) None if ... ) Heat to 500 °C for 2 hours if used outside d) Baked at 150°C for 4hours prior to use

Last Answer : b) None if they were in a sealed vacuum pack prior to use

Rod mills employed for grinding (A) Employ a steel shell having L/D ratio of 1.5 to 3.0 (B) Is useful for handling sticky materials (C) Employ steel rods of 2-12 cms diameter extending over full length of the mill (D) All 'a', 'b' & 'c'

Description : Rod mills employed for grinding (A) Employ a steel shell having L/D ratio of 1.5 to 3.0 (B) Is useful for handling sticky materials (C) Employ steel rods of 2-12 cms diameter extending over full length of the mill (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Out of the following substances, one ton of __________ will store the maximum heat for a rise of 30°C in temperature. (A) Steel (B) Lignite (C) Water (D) Lime stone

Description : Out of the following substances, one ton of __________ will store the maximum heat for a rise of 30°C in temperature. (A) Steel (B) Lignite (C) Water (D) Lime stone

Last Answer : (C) Water

Stainless steel is welded with difficulty because of (A) Its high melting temperature (B) Chances of cracking (C) Oxide film formation (D) Chromium carbide formation

Description : Stainless steel is welded with difficulty because of (A) Its high melting temperature (B) Chances of cracking (C) Oxide film formation (D) Chromium carbide formation

Last Answer : Option C

Which of the following terms is used to describe a tachycardia characterized by abrupt onset, abrupt cessation, and a QRS of normal duration? a) Paroxysmal atrial tachycardia PAT is often caused by a conduction problem in the AV node and is now called AV nodal reentry tachycardia. b) Sinus tachycardia Sinus tachycardia occurs when the sinus node regularly creates an impulse at a faster-than-normal rate. c) Atrial flutter Atrial flutter occurs in the atrium and creates an atrial rate between 250-400 times per minute. d) Atrial fibrillation Atrial fibrillation causes a rapid, disorganized, and uncoordinated twitching of atrial musculature.

Description : Which of the following terms is used to describe a tachycardia characterized by abrupt onset, abrupt cessation, and a QRS of normal duration? a) Paroxysmal atrial tachycardia PAT ... fibrillation Atrial fibrillation causes a rapid, disorganized, and uncoordinated twitching of atrial musculature.

Last Answer : a) Paroxysmal atrial tachycardia PAT is often caused by a conduction problem in the AV node and is now called AV nodal reentry tachycardia.

In a plate type heat exchanger, heat transfer plates are never made of (A) Stainless steel (B) Cast iron (C) Titanium (D) Hastelloy C

Description : In a plate type heat exchanger, heat transfer plates are never made of (A) Stainless steel (B) Cast iron (C) Titanium (D) Hastelloy C

Last Answer : (B) Cast iron

Heat exchanger tubes are never made of (A) Plain carbon steel (B) Stainless steel (C) Lead (D) Copper

Description : Heat exchanger tubes are never made of (A) Plain carbon steel (B) Stainless steel (C) Lead (D) Copper

Last Answer : (C) Lead

Which of the following parameters is not responsible for the heat loss from a hot steam carrying bare pipe surface located in a room without fans? (A) Emissivity of pipe surface (B) Diameter & length of the pipe (C) Temperature of hot pipe surface & that of air in the room (D) None of thes

Description : Which of the following parameters is not responsible for the heat loss from a hot steam carrying bare pipe surface located in a room without fans? (A) Emissivity of pipe surface (B) Diameter & length of the pipe (C) Temperature of hot pipe surface & that of air in the room (D) None of thes

Last Answer : Option D

Seed treatment with Vitavex is the main controlling method of— (A) Loose smut (B) Rust (C) Downy mildew (D) All of these

Description : Seed treatment with Vitavex is the main controlling method of— (A) Loose smut (B) Rust (C) Downy mildew (D) All of these

Last Answer : (D) All of these

The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. the inter occlusal distance will be physiologically acceptable after treatment B. there will be sufficient tooth bulk in the abutment teeth for proper retention of the crowns C. at least two third of the original alveolar process will remain for adequate periodontal support D. the aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Description : The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. the inter occlusal distance will be physiologically ... the aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Last Answer : A. the inter occlusal distance will be physiologically acceptable after treatment

The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. The inter occlusal distance will be physiologically acceptable after treatment B. There will be sufficient tooth bulk in the abutment teeth for proper retention of the crowns C. At least two third of the original alveolar process will remain for adequate periodontal support D. The aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Description : The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. The inter occlusal distance will be physiologically ... . The aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Last Answer : A. The inter occlusal distance will be physiologically acceptable after treatment

Seed treatment with Vitavex is the main controlling method of a) Loose smut b) Rust c) Downy mildew d) All of these

Description : Seed treatment with Vitavex is the main controlling method of a) Loose smut b) Rust c) Downy mildew d) All of these 

Last Answer : d) All of these 

L/G ratio in a cooling tower is a ratio of _____. • Length and girth • Length and temperature gradient • Water flow rate and air mass flow rate • Air mass flow rate and water flow rate

Description : L/G ratio in a cooling tower is a ratio of _____. • Length and girth • Length and temperature gradient • Water flow rate and air mass flow rate • Air mass flow rate and water flow rate

Last Answer : Water flow rate and air mass flow rate

The time taken by the machine to attain 0.632 of its final steady temperature rise is called (a) heating time constant (b) cooling time constant (c) either (a) or (b) (d) none of the above

Description : The time taken by the machine to attain 0.632 of its final steady temperature rise is called (a) heating time constant (b) cooling time constant (c) either (a) or (b) (d) none of the above

Last Answer : (a) heating time constant

Which law states, “The rate of loss of heat by a body is directly proportional to the difference in temperature between the body and the surroundings.” (1) Doppler’s Effect (2) Newton’s law of cooling (3) Kirchhoff’s Law (4) Stefan’s Law

Description : Which law states, “The rate of loss of heat by a body is directly proportional to the difference in temperature between the body and the surroundings.” (1) Doppler’s Effect (2) Newton’s law of cooling (3) Kirchhoff’s Law (4) Stefan’s Law

Last Answer : (2) Newton’s law of cooling Explanation: Kirchhoff’s Law – Kirchhoff’s Law signifies that good absorbers are good emitters. Stefan’s Law – The radiant energy emitted by a black body per unit area per unit time is directly proportional to the fourth power of its absolute temperature.

Which law states, "The rate of loss of heat by a body is directly proportional to the difference in temperature between the body and the surroundings." (1) Doppler's Effect (2) Newton's law of cooling (3) Kirchhoff's Law (4) Stefan's Law

Description : Which law states, "The rate of loss of heat by a body is directly proportional to the difference in temperature between the body and the surroundings." (1) Doppler's Effect (2) Newton's law of cooling (3) Kirchhoff's Law (4) Stefan's Law

Last Answer : (2) Newton's law of cooling Explanation: Kirchhoff's Law - Kirchhoff's Law signifies that good absorbers are good emitters. Stefan's Law - The radiant energy emitted by a black body per unit area per unit time is directly proportional to the fourth power of its absolute temperature.

Which law states, "The rate of loss of heat by a body is directly proportional to the difference in temperature between the body and the surroundings"? (1) Doppler's Effect (2) Newton's law of cooling (3) Kirchhoff's Law (4) Stefan's Law

Description : Which law states, "The rate of loss of heat by a body is directly proportional to the difference in temperature between the body and the surroundings"? (1) Doppler's Effect (2) Newton's law of cooling (3) Kirchhoff's Law (4) Stefan's Law

Last Answer : (2) Newton's law of cooling Explanation: Newton's Law of Cooling states that the rate of change of the temperature of an object is proportional to the difference between its own temperature and the ambient temperature.

For small temperature difference, the heat transfer rate as per Newton's law of cooling is proportional to (where, Δt = excess temperature) (A) Δt (B) Δt 2 (C) Δt 3 (D) √(Δt)

Description : For small temperature difference, the heat transfer rate as per Newton's law of cooling is proportional to (where, Δt = excess temperature) (A) Δt (B) Δt 2 (C) Δt 3 (D) √(Δt)

Last Answer : (A) Δt

For the same heat load and mass flow rate in the tube side of a shell and tube heat exchanger, one may use multipass on the tube side, because it (A) Decreases the pressure drop (B) Decreases the outlet temperature of cooling medium (C) Increases the overall heat transfer coefficient (D) None of these

Description : For the same heat load and mass flow rate in the tube side of a shell and tube heat exchanger, one may use multipass on the tube side, because it (A) Decreases the pressure drop (B) ... the outlet temperature of cooling medium (C) Increases the overall heat transfer coefficient (D) None of these

Last Answer : (C) Increases the overall heat transfer coefficient

For a body cooling in a draft, the rate of heat loss is proportional to the difference in temperature between the body and its surroundings.  a. Nemst Effect  b. Caloric Theory  c. Joule’s Law  d. Newton’s Law of Cooling

Description : For a body cooling in a draft, the rate of heat loss is proportional to the difference in temperature between the body and its surroundings.  a. Nemst Effect  b. Caloric Theory  c. Joule’s Law  d. Newton’s Law of Cooling

Last Answer : Newton’s Law of Cooling

How can we ensure the better temperature measurement on the stainless steel microtube?

Description : How can we ensure the better temperature measurement on the stainless steel microtube?

Last Answer : The temperature of a stainless steel microtube is checked by using a thermocouple.

What is the main reason stainless thermos bottles should not be washed in a dishwasher?

Description : What is the main reason stainless thermos bottles should not be washed in a dishwasher?

Last Answer : A dishwasher will ruin the finish on the outside of a stainless thermos bottle, making the outside unsightly. As far as durability goes, if the thermos bottle contains a vacuum seal, washing in the dishwasher will cause the seal to malfunction and the thermos will begin to leak.

For a given ambient air temperature with increase in the thickness of insulation of a hot cylindrical pipe, the rate of heat loss from the surface would (A) Decrease(B) Increase(C) First decrease and then increase(D) First increase and then decrease

Description : For a given ambient air temperature with increase in the thickness of insulation of a hot cylindrical pipe, the rate of heat loss from the surface would (A) Decrease (B) Increase (C) First decrease and then increase (D) First increase and then decrease

Last Answer : (D) First increase and then decrease

When the continuing auditor intends to use information about the entity and its environment obtained in prior periods, the auditor shoulda. Assess control risk as "high" for theassertions affected by the prior-periodinformation.b. Seek permission with the client in usingthe prior period information obtained bythe auditor.c. Determine whether changes haveoccurred that may affect therelevance of such information in thecurrent audit.d. Determine whether to equitably reducethe audit fee due to lower audit effortexpended during the engagement

Description : When the continuing auditor intends to use information about the entity and its environment obtained in prior periods, the auditor should a. Assess control risk as "high" for the assertions ... whether to equitably reduce the audit fee due to lower audit effort expended during the engagement

Last Answer : Determine whether changes have occurred that may affect the relevance of such information in the current audit.

What is the procedure to make stainless still pipe and is this pipe is safe to use for drinking water pipe line?

Description : What is the procedure to make stainless still pipe and is this pipe is safe to use for drinking water pipe line?

Last Answer : The making of stainless steel pipe is a long and intense process. There is a piece of round bar that is heated at first and then a mandrel is inserted into it giving it a round and hollow ... the stainless steel pipe is safe for drinking water as it is resistant to corrosion and is much durable.

Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder (C) The wavelength corresponding to maximum mono-chromatic emissive power increases with rise in temperature (D) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Description : Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate ... ) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Last Answer : (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder

A 300mm diameter pipe, 5mm wall thickness is to be radiographed using the double wall single image technique. The source to be used is Iridium. Which of the following statements is true? a) It should not be done because the thickness is below that recommended b) It should be better to use a cobalt 60 source in this instance c) There is no problem with the technique d) Only the double wall, double image technique should be used with Iridium

Description : A 300mm diameter pipe, 5mm wall thickness is to be radiographed using the double wall single image technique. The source to be used is Iridium. Which of the following statements is true? a) ... problem with the technique d) Only the double wall, double image technique should be used with Iridium

Last Answer : c) There is no problem with the technique