Which type of RAM needs regular referred: a. Dynamic RAM b. Static RAM c. Permanent RAM d. SD RAM

Which type of RAM needs regular referred:
a. Dynamic RAM
b. Static RAM
c. Permanent RAM
d. SD RAM
by

1 Answer

Answer :

a. Dynamic RAM
by

Related questions

Which RAM is created using MOS transistors: a. Dynamic RAM b. Static RAM c. Permanent RAM

Description : Which RAM is created using MOS transistors: a. Dynamic RAM b. Static RAM c. Permanent RAM

Last Answer : a. Dynamic RAM

The ram which is created using bipolar transistors is called: a. Dynamic RAM b. Static RAM c. Permanent RAM d. DDR RAM

Description : The ram which is created using bipolar transistors is called: a. Dynamic RAM b. Static RAM c. Permanent RAM d. DDR RAM

Last Answer : b. Static RAM

Which term is used to describe RAM? a. Dynamic RAM (DRAM) b. Static RAM (SRAM) c. Video RAM (VRAM) d. All of the above

Description : Which term is used to describe RAM? a. Dynamic RAM (DRAM) b. Static RAM (SRAM) c. Video RAM (VRAM) d. All of the above

Last Answer : d. All of the above

For the most Static RAM the maximum access time is about a) 1ns b) 10ns c) 100ns d) 1μs

Description : For the most Static RAM the maximum access time is about a) 1ns b) 10ns c) 100ns d) 1μs

Last Answer : b) 10ns

For the most Static RAM the write pulse width should be at least a) 10ns b) 60ns c) 300ns d) 1μs

Description : For the most Static RAM the write pulse width should be at least a) 10ns b) 60ns c) 300ns d) 1μs

Last Answer : b) 60ns

Which term is used to describe RAM? A) Dynamic RAM (DRAM) B) Static RAM (SRAM) C) Video RAM (VRAM) D) All of the above

Description : Which term is used to describe RAM? A) Dynamic RAM (DRAM) B) Static RAM (SRAM) C) Video RAM (VRAM) D) All of the above

Last Answer : Answer : D

Which of the following memories must be refreshed many times per second? A) Static RAM B) Dynamic RAM C) EPROM D) ROM

Description : Which of the following memories must be refreshed many times per second? A) Static RAM B) Dynamic RAM C) EPROM D) ROM

Last Answer : Answer : B

Which of the following memories must be refreshed many times per second? a. Static RAM b. Dynamic RAM c. EPROM d. ROM

Description : Which of the following memories must be refreshed many times per second? a. Static RAM b. Dynamic RAM c. EPROM d. ROM

Last Answer : b. Dynamic RAM

Which term is used to describe RAM? a. Dynamic RAM (DRAM) b. Static RAM (SRAM) c. Video RAM (VRAM) d. All of the above

Description : Which term is used to describe RAM? a. Dynamic RAM (DRAM) b. Static RAM (SRAM) c. Video RAM (VRAM) d. All of the above

Last Answer : d. All of the above

Which term is used to describe RAM? a. Dynamic RAM (DRAM) b. Static RAM (SRAM) c. Video RAM (VRAM) d. All of the above

Description : Which term is used to describe RAM? a. Dynamic RAM (DRAM) b. Static RAM (SRAM) c. Video RAM (VRAM) d. All of the above

Last Answer : d. All of the above

Which RAM is faster static or dynamic?

Description : Which RAM is faster static or dynamic?

Last Answer : Static RAM are faster than dynamic RAM.

The amount of current assets required to meet a firm's long-term minimum needs is referred to as working capital. A. permanent B. temporary C. net D. gross

Description : The amount of current assets required to meet a firm's long-term minimum needs is  referred to as working capital. A. permanent B. temporary C. net D. gross

Last Answer : A. permanent

Which is the type of memory for information that does not change on your computer? a. RAM b. ROM c. ERAM d. RW / RAM

Description : Which is the type of memory for information that does not change on your computer? a. RAM b. ROM c. ERAM d. RW / RAM

Last Answer : b. ROM

DMA stands for: a. Dynamic memory access b. Data memory access c. Direct memory access d. Both B and C

Description : DMA stands for: a. Dynamic memory access b. Data memory access c. Direct memory access d. Both B and C

Last Answer : d. Both B and C

The memory which is programmed at the time it is manufactured a. POM b. RAM c. PROM d. EPROM

Description : The memory which is programmed at the time it is manufactured a. POM b. RAM c. PROM d. EPROM

Last Answer : a. POM

A typical personal computer used for business purposes would have… of RAM. a. 4 KB b. 16 K c. 64 K d. 256 K

Description : A typical personal computer used for business purposes would have… of RAM. a. 4 KB b. 16 K c. 64 K d. 256 K

Last Answer : d. 256 K

which chips using special external equipment can reprogram a. ROM b. PROM c. SAM d. RAM

Description : which chips using special external equipment can reprogram a. ROM b. PROM c. SAM d. RAM

Last Answer : b. PROM

A memory that is capable of determining whether a given datum is contained in one of its address is a. ROM b. PROM c. CAM d. RAM

Description : A memory that is capable of determining whether a given datum is contained in one of its address is a. ROM b. PROM c. CAM d. RAM

Last Answer : c. CAM

Which of the following memories has the shortest access times? a. Cache memory b. Magnetic bubble memory c. Magnetic core memory d. RAM

Description : Which of the following memories has the shortest access times? a. Cache memory b. Magnetic bubble memory c. Magnetic core memory d. RAM

Last Answer : a. Cache memory

Which of the following memories allows simultaneous read and write operations? a. ROM b. RAM c. EPROM d. None of above

Description : Which of the following memories allows simultaneous read and write operations? a. ROM b. RAM c. EPROM d. None of above

Last Answer : b. RAM

The silicon chips used for data processing are called a. RAM chips b. ROM chips c. Micro processors d. PROM chips

Description : The silicon chips used for data processing are called a. RAM chips b. ROM chips c. Micro processors d. PROM chips

Last Answer : d. PROM chips

The two kinds of main memory are: a. Primary and secondary b. Random and sequential c. ROM and RAM d. All of above

Description : The two kinds of main memory are: a. Primary and secondary b. Random and sequential c. ROM and RAM d. All of above

Last Answer : c. ROM and RAM

In linear decoding address bus of 16-bit wide can connect only ____ of RAM. a. 16 KB b. 6KB c. 12KB d. 64KB

Description : In linear decoding address bus of 16-bit wide can connect only ____ of RAM. a. 16 KB b. 6KB c. 12KB d. 64KB

Last Answer : b. 6KB

Which of the following instruction perform the move accumulator to external RAM of 16bit address? a) MOV @ DPTR, A b) MOVX @ Ri, A c) MOV A, @ Ri d) MOVX @ DPTR, A

Description : Which of the following instruction perform the move accumulator to external RAM of 16bit address? a) MOV @ DPTR, A b) MOVX @ Ri, A c) MOV A, @ Ri d) MOVX @ DPTR, A

Last Answer : c) MOV A, @ Ri

Which of the following instruction perform as of indirect RAM to accumulator? a) MOV A, Rn b) MOV @Ri, A c) MOV A, @Ri d) MOV Rn, A

Description : Which of the following instruction perform as of indirect RAM to accumulator? a) MOV A, Rn b) MOV @Ri, A c) MOV A, @Ri d) MOV Rn, A

Last Answer : c) MOV A, @Ri

The SP is of ___ wide register. And this may be defined anywhere in the ______. a) 8 byte, on-chip 128 byte RAM. b) 8 bit, on chip 256 byte RAM. c) 16 bit,

Description : The SP is of ___ wide register. And this may be defined anywhere in the ______. a) 8 byte, on-chip 128 byte RAM. b) 8 bit, on chip 256 byte RAM. c) 16 bit,

Last Answer : a) 8 byte, on-chip 128 byte RAM.

In 8279 Status Word, data is read when ________ pins are low, and write to the display RAM with ____________ are low. a) A0, CS, RD & A0, WR, CS. b) CS, WR, A0 & A0, CS, RD c) A0, RD & WR, CS d) CS, RD & A0, CS.

Description : In 8279 Status Word, data is read when ________ pins are low, and write to the display RAM with ____________ are low. a) A0, CS, RD & A0, WR, CS. b) CS, WR, A0 & A0, CS, RD c) A0, RD & WR, CS d) CS, RD & A0, CS.

Last Answer : c) A0, RD & WR, CS

ROM d) 8 bit, on chip 128 byte RAM. 3. After reset, SP register is initialized to address________. a) 8H b) 9H c) 7H d) 6H

Description : ROM d) 8 bit, on chip 128 byte RAM. 3. After reset, SP register is initialized to address________. a) 8H b) 9H c) 7H d) 6H

Last Answer : c) 7H

: sd card 32GB ? Suppose the internal storage of a phone is ROM 32GB, RAM 2 GB . The phone has USB 2.0 and supports Otg . It does not use sd card in such a phone . It wants to view music pictures with the help of 16GB or 32GB pen drive . I want to know what the same pressure will be

Description : : sd card 32GB ? Suppose the internal storage of a phone is ROM 32GB, RAM 2 GB . The phone has USB 2.0 and supports Otg . It does not use sd card in such a phone . It wants to view music pictures with the help of 16GB or 32GB pen drive . I want to know what the same pressure will be

Last Answer : Both pen drive and memory card are the same thing. So you can use any of them. Just make sure the OTGT matches the phone. If you have USB 2.0, you will only get the right speed if you use it , otherwise the phone will hang. Thanks.

Human beings are referred to as Homosapinens, which device is called Sillico Sapiens? a. Monitor b. Hardware c. Robot d. Computer

Description : Human beings are referred to as Homosapinens, which device is called Sillico Sapiens? a. Monitor b. Hardware c. Robot d. Computer

Last Answer : d. Computer

The act of acquiring an instruction is referred as the____ the instruction: a. Fetching b. Fetch cycle c. Both a and b d. None of these

Description : The act of acquiring an instruction is referred as the____ the instruction: a. Fetching b. Fetch cycle c. Both a and b d. None of these

Last Answer : a. Fetching

Why 8087 is referred to as Coprocessor? i) Because 8087 is used in parallel with main processor in a system, rather than serving as a main processor itself. ii) Because 8087 is used in serial with main processor in a system, rather than serving as a main processor itself. iii) Because main Microprocessor handles the general program execution and the 8087 handles specialized math computations. a) i & iii b) ii & iii c) iii only. d) i only.

Description : Why 8087 is referred to as Coprocessor? i) Because 8087 is used in parallel with main processor in a system, rather than serving as a main processor itself. ii) Because 8087 is used in serial with main processor in a ... math computations. a) i & iii b) ii & iii c) iii only. d) i only.

Last Answer : c) iii only.

The difference between memory and storage is that memory is …. and storage is … a. Temporary, permanent b. Permanent, temporary c. Slow, fast d. All of above

Description : The difference between memory and storage is that memory is …. and storage is … a. Temporary, permanent b. Permanent, temporary c. Slow, fast d. All of above

Last Answer : a. Temporary, permanent

Which of the following terms is the most closely related to main memory? a. Non volatile b. Permanent c. Control unit d. Temporary

Description : Which of the following terms is the most closely related to main memory? a. Non volatile b. Permanent c. Control unit d. Temporary

Last Answer : d. Temporary

The difference between memory and storage is that memory is … and storage is … a. Temporary, permanent b. Permanent, temporary c. Slow, fast d. All of above

Description : The difference between memory and storage is that memory is … and storage is … a. Temporary, permanent b. Permanent, temporary c. Slow, fast d. All of above

Last Answer : a. Temporary, permanent

Which of the following memories needs refreshing? a. SRAM b. DRAM c. ROM d. All of above

Description : Which of the following memories needs refreshing? a. SRAM b. DRAM c. ROM d. All of above

Last Answer : a. SRAM

Which type of channel it is where the number of users are stable and the traffic is not bursts? A. static channelB. dynamic channel C. free channel D. both a and c

Description : Which type of channel it is where the number of users are stable and the traffic is not bursts? A. static channel B. dynamic channel C. free channel D. both a and c

Last Answer : A. static channel

______ is RAM that combines the fast read and write access of Dynamic RAM A. VRAM B. WRAM C. MRAM D. FRAM

Description : ______ is RAM that combines the fast read and write access of Dynamic RAM A. VRAM B. WRAM C. MRAM D. FRAM

Last Answer : D. FRAM Ferroelectric RAM

EDODRAM stands for _________ A. Extended Digital Output Dynamic RAM B. Extended Dynamic Output Digital RAM C. Extended Data Output Digital RAM D. Extended Data Output Dynamic RAM

Description : EDODRAM stands for _________ A. Extended Digital Output Dynamic RAM B. Extended Dynamic Output Digital RAM C. Extended Data Output Digital RAM D. Extended Data Output Dynamic RAM

Last Answer : D. Extended Data Output Dynamic RAM

_________is a copy of Basic Input/Output Operating System (BIOS) routines from Read Only Memory (ROM) into a special area of RAM so that they can be accessed more quickly. A. Dynamic RAM B. Shadow RAM C. Synchronous Graphics RAM D. Video RAM

Description : _________is a copy of Basic Input/Output Operating System (BIOS) routines from Read Only Memory (ROM) into a special area of RAM so that they can be accessed more quickly. A. Dynamic RAM B. Shadow RAM C. Synchronous Graphics RAM D. Video RAM

Last Answer : B. Shadow RAM

A dynamic RAM has refresh cycle of 32 times per msec. Each refresh operation requires 100 nsec and a memory cycle requires 250 nsec. What percentage of memory’s total operating time is required for refreshes? (A) 0.64 (B) 0.96 (C) 2.00 (D) 0.32

Description : A dynamic RAM has refresh cycle of 32 times per msec. Each refresh operation requires 100 nsec and a memory cycle requires 250 nsec. What percentage of memory’s total operating time is required for refreshes? (A) 0.64 (B) 0.96 (C) 2.00 (D) 0.32

Last Answer : Answer: D Explanation: in 1ms : refresh = 32 times Memory cycle = 1ms/250ns = 106ns/250ns = 4000 times Therefore, % of refresh time = (32 x 100ns)/(4000 x 250ns) = 3200ns/1000000 x 100% = 0.32%

Where can I find dynamic (animated) comics (NOT the static pictures!), if possible free?

Description : Where can I find dynamic (animated) comics (NOT the static pictures!), if possible free?

Last Answer : hmmmmmm. Not exactly what you’re looking for, but you might check out the current MSPA

To solve the FEM problem, it subdivides a large problem into smaller, simpler parts that arecalled a.static elements b.dynamic elements c.infinite elements d.finite elements

Description : To solve the FEM problem, it subdivides a large problem into smaller, simpler parts that arecalled a.static elements b.dynamic elements c.infinite elements d.finite elements

Last Answer : d.finite elements

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Proportional to the coefficient of static friction b.Proportional to the coefficient of dynamic friction c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Last Answer : c. Indeterminate

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Indeterminate b.Proportional to the coefficient of dynamic friction c.Determinate but depends on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Last Answer : c. Determinate but depends on the acceleration of the cylinder

Static friction is always a.greater than the dynamic driction b.either greater or more than the dynamic friction c.less than the dynamic friction d.107 dynes e.equal to the dynamic friction

Description : Static friction is always a.greater than the dynamic driction b.either greater or more than the dynamic friction c.less than the dynamic friction d.107 dynes e.equal to the dynamic friction

Last Answer : a. greater than the dynamic driction

Show the difference between a static website and a dynamic website. ?

Description : Show the difference between a static website and a dynamic website. ?

Last Answer : answer:

Static Website And Dynamic Of the website In The difference What ?

Description : Static Website And Dynamic Of the website In The difference What ?

Last Answer : Static Website: That The web On the site Data The value On the webpage Loading Or On To do After Change To do Goes No. Him Static The web Site Says. Static Of the website Features : # Cost Less ... is. # Cost More #comparable _ Way More Safe #attractive _, Interactive Lay - out Made To do Goes.

What is the difference between static and dynamic website?

Description : What is the difference between static and dynamic website?

Last Answer : The static web pages display the same content each time when someone visits it, whereas in dynamic web pages takes more time while loading.